Hahaha, that was a fun! Definitely enjoyed that burp test. Some people have trouble hitting 145's with 10's and even 12's in a truck as big as a Sequoia, so awesome results from the 6.5" beasts.

@marcjohnson5148

4 жыл бұрын

I have much respect for the little beasts.

This really just shows how efficient the box design is. Those are some beefy looking little subs though.

@________GHOST________

4 жыл бұрын

But the bad news is NO DECAF/SLOWED DOWN MUSIC WILL NOT HAPPEN ON THESE TYPE OF SUBS :/

@mmatsstang2805

4 жыл бұрын

Kerry Pence exactly man, design is key. I spent months on the design on this enclosure. You don’t always need the biggest possible driver to do descent numbers👌🏻 this is all initial testing no tweaking of the enclosure or port tuning.

@mmatsstang2805

4 жыл бұрын

_1_ it can still play down to 26 hz all the way up to 70 hz its musical but rolls off in the lower freqs. But you’re right it’s not meant for decaf music lol

@HashDogg06

4 жыл бұрын

You want efficiency? go look up Ronnie Ruckus Smith on Facebook, he does over 141db on a single Savard 6.5 inch sub with only 100 watts then does over 149db with almost 1000 watts!

@HashDogg06

4 жыл бұрын

@@mmatsstang2805 Why not? 6th order works great as you have 2 tuning points (high & low), 6th order however in my opinion suffers a little playing tight quick accurate music like rock & types of Drum & Bass which tends to sound a little muddy due to the lack accuracy but seems fine on long extended bass notes which decaf is good for.

Once again, it's not really about the subwoofer. It's about the enclosure working in combination with your sub and the environment they're in.

@ParkerTheBasshead

4 жыл бұрын

Agreed!

@patricedavid1

3 жыл бұрын

yup!! agreed here too

@zencoatlrios2648

3 жыл бұрын

And the power, quality power.

Nice Guys i like what u are doing sounds good no tage or trunk Rattling I love the deep Tunnel base

Hell yea man i dig any type size or brands i just love speakors in general

Awesome! I just switched to two Skar IX 8’s thanks for doing videos of Skar products! And one is almost as loud as my pro audio 15 inch sub

@kristopherdonaldson9569

2 жыл бұрын

What kind of pro audio 15 wasn't louder than the ix-8?

Bad ass bro! The content just keeps getting better!

@ParkerTheBasshead

4 жыл бұрын

Thanks!

@RyanBassForLife

4 жыл бұрын

@@ParkerTheBasshead this was good Jacob Viral should get a 10" for his box😁

Parker I have been watching your channel from the very beginning and you have done an amazing job! Keep up the good work on all your awesome videos! Always have great content!!

@ParkerTheBasshead

4 жыл бұрын

Thanks 😊 really appreciate you!

Insane small subwoofers 🔊 Love it!!!

Solid little 6.5s Outperformed what i thought they can do. I need 4-6 of em lol 😊

Next time I'm in the Carolinas I'll have to visit one of their dealer reps. These would work great under the back seat of my dually.

This is why I love sub builders “I’ll just rebuild them” before I met my sub builder I thought I’d be stuck with what was out there on the market and paying retail. Now my budget and power is the limit gettn 2 18 inch kicker Solo X motors on 15 inch baskets made for what I’m into and tune my boxes to 30-18hz. I really want to start building my own subs one day

@theejoeylee

2 жыл бұрын

Robot underground?

This might be the reason my next set of sub would be EM audio

Always a nice content 😀👍

I really like what EM audio are doing

gorgeous front yard man damn,thats beautiful country where ever yall are.

@ParkerTheBasshead

3 жыл бұрын

Yes it really is!

DUDE the view @4:49 min in, from that guy house WOW! If I had his money I would burn mine. Cool video Parker thx!

@ParkerTheBasshead

4 жыл бұрын

Naw we just live up in the mountains and there is a not of land like that

Them little subs were awesome!!!

These guys were just pushing the limit on these nugget sized Subs but DAMN they sent it and sent WELL!!!! Hands down, they've just proven how solidly built these #emAudio woofers are

Does sound damping material work well inside a box? Also what app do you use for the different hertz bursts?

That is insane for 2 6.5 in that size cabin with little to no sound dampening.

Man, your friends house looks like it has some sweet nature around it. Looks like a golf course

hew Parker... love the vids man!!

First time on this channel.. I like those door pods!!! Some of the best speakers I’ve ever had tbh... they are loud on a good amp too.

Do you feel like this the loudest 6.5? Are any recommendations for any better ones?

Awesome little sub, I see more and more people using small subs, you need a good box for a 8" sub so you can test some.

That's an awesome box! My box definitely is not meant for low power. Could you look at my build and tell me what you think?

That was pretty good 👍

Thats nice, they have realy good coils

You review any of the alpine 12" 2ohm svc type R's yet? I have a pair of the 5th gen and with the rockford t1000 wired at 1 ohm got 147 out of an n I think they may have more to give. Ive also got alot to learn about such things so nervous to push em too much further past their rated rms. But thats where they're living now so far so good

You go to this dudes house, blow his subs, and bounce 😂😂😂 fr tho that was awesome! And that box was amazing! Great content as always Parker!

@ParkerTheBasshead

4 жыл бұрын

Haha well he wanted to do it. And the company is rebuilding them for him since we made the video

@catch22frubert

4 жыл бұрын

@@ParkerTheBasshead That's awesome of the company to do that, but in all fairness, they just got some awesome advertisement when it took 6500 watts to rip apart the smallest possible sub they can make. The coil was fine! You literally ejected the coils out of the gap! Lol

@jameslewis974

4 жыл бұрын

@@ParkerTheBasshead is that a 6th order? And was were the tuning frequencies since in a 6th order you have 2 frequencies over a ported or a 4th order being able to tune to 1 frequency I'm guessing the tube port was prolly low mid 40s and the large opening low 50s And was the 145 sealed in kick or door open in kick?

@jameslewis974

4 жыл бұрын

I'm thinking of doing 6 8" subs like that in my 03 Lexus is300 in a horn style where the opening will be towards front and the subs will be in 2 rows of 3 on top part of opening that will be shaped like >and the rest of the box will be squared off with a port at the very bottom. I'm also building an explorer with 6 Resilient Sounds platinum 15s or 18s depends what kind of enclosure I end up going with because it's only a 2 door so limited on space especially after a 6 battery bank and capacitor bank 1 battery for each taramp 3000 and 6-8 cap bank for each also.

@1ohmwrecker

4 жыл бұрын

@@ParkerTheBasshead that's actually really dope they're doing that. I looked them up. They got some impressive stuff.

6th orders gives wider bandwidth and more cone control; within the tuning frequencies. Good job bro!

@ParkerTheBasshead

4 жыл бұрын

Thanks man!!

@tidobass6048

4 жыл бұрын

6th orders in my opinion don’t give more cone control they are open on both ends for tuning. If you want come control a 4th is a much safer route

@BudgetBassHead

4 жыл бұрын

@@tidobass6048 the sealed chamber of a 4th order bandpass promotes more power handling. However, be mindful that at tuned frequencies, sealed chambers lose cone control. It's the opposite for ported chambers.

@especialistqap

Жыл бұрын

Thi is a quasi 6th order band pass like Bose sub

Jacob viral should get a 10" and change his box to a special tuned 6th order love it.

Hey quick question I had installed a new radio but even the old one would do it every time I would move the radio it would turn off and then move it back it would turn on, please help I hate riding around without listening to my radio

Your friend kinda looks like Q from impractical jokers lol

@Dr_Decaf

4 жыл бұрын

Lol he does

@mmatsstang2805

4 жыл бұрын

Cameron lol I’ll take it as a compliment

@MuffinSlayerrHD

4 жыл бұрын

mmats stang you should, Q’s awesome ahah

what app do you use on your phone to play each frequency? if it’s a payed one does anyone know a good free one?

I have a question fellow bassheads, hopefully one of you can answer. So i just got two 10s and the factory recommendations for the enclosure is either ported or sealed and gives the optimum volume for the enclosure . Is that volume double if you have 2 speakers? Im trying to build a box to save money and kill time, learn. A lot more scientific than putting speakers in coffe cans lol

Would you recommend these subs over sundown audio?

i am running two Ground Zero 6.5 subs in the back at 500 rms each and two DS18 Elite Z 6.5 subs in the doors at 300 rms each, they are crazy. got many others hooked up but those are my 6.5's

@ParkerTheBasshead

4 жыл бұрын

Niiiiice

Hey I have a slingshot what would u recommend for some bass

Any videos on the 6.5 506 digital design subs? Thinking of getting 4 of them

Niiiiiiiiiiiiiiiiiiiiiiiiiiice video great woofers my freind wich MID set up for great voice did you sujest to me thanks

What is the exact model SPL meter you have Parker? I've been looking for one.

Bro can you compare bandpass box frequency with ported box frequency

I would advise making a terminal on the box with all coils attached. That way you can wire to whatever without taking the box apart and in turn make a permanent seal that will also help with dB

@6980869

Жыл бұрын

Better yet - let’s see you build it. 😉

Never seen anything like that!!! 🔊 WOW 😲😳👌✌️❤️

Hey. Need to know the best 6.5 subs that i can put in my 2019 Chevrolet Silverado.

Where can I find information on how to make a super efficient ported box that will be incredibly loud?

Dang lil sub can hold it awesome 👏

Nice ! What about DD 1506? Who is better?

The most underated sub youtuber!

@ParkerTheBasshead

4 жыл бұрын

Thanks man really appreciate you!

All ur videos are awesome Parker

@ParkerTheBasshead

3 жыл бұрын

Thanks man!!

@Basshead304

3 жыл бұрын

@@ParkerTheBasshead can I get a shout out bro

Wow that's awesome!

Where could we get that box from? I’ve done personal builds from 8s, 12 and 15s. Now I want to do a build with the 6.5 subs!

I have two 6.5 inch subs that have pretty good excursion but the surround that comes from the factory limits them really badly.

That speaker in the door of the truck that has the letter P on it what brand is that? I have an 8 inch woofer that looks like that in my garage and I’ve always wondered what it is.

W.H.A.T 4"coil 145.6dB, nice, and nice 6th order enclosure

@bigsergonbaby5959

4 жыл бұрын

4" coil? They have a 2" or either 2.5. Where do you get 4 from?

@MayzDayz007

4 жыл бұрын

@@bigsergonbaby5959 I misread the "4-layer copper coil" ... 2" I see it now! Ty

@MayzDayz007

4 жыл бұрын

@@bigsergonbaby5959 they might as well have a 4" coil (joke) ... because you can get 3,4,5 spiders, You can practically build your own sub from what I read. Might have to check out the $400 15" subwoofer out? If a 6½ can take that much power I'd love to see what a 15 does, but I love my Memphis and NVX

Needs an upgrade to the spider to prevent over excursion. Can't believe those tiny 6.5s took that much power!

@randomtube8226

4 жыл бұрын

Couldn't find a price on them here in the US 🤔

@EagleTheBirdman

4 жыл бұрын

They are our standard version. We are redoing them with spl spider pack

@EagleTheBirdman

4 жыл бұрын

They are 239.00 each standard version

@paulcherry1520

4 жыл бұрын

@@EagleTheBirdman hell yea man those are some decent subs

Parker, what db meter are you using? I need one. Thanks man.

Damm Beautiful view there !

Is that an app you're using ? If so what's it called ? Thanks

Impressive, but what's the point if you need a box sized for 12"s to get that output?

which kind of spl meter is this?

Could you try out Skar audio 10,000 watt 15" subwoofer.

Can these subs be used as free air subs?

what spl meter do you use?

@parkerthebasshead what app are you using for your test tones

So where can I find a set of those???

I want to see what Rockville k9 8" subwoofer will take

please try “rizzo rizzo-ballaholic EGA john remix” for music demos in the next video!!! slaps HARD

That was awesome!!!

Hey Parker I know this video isn't about headway cells but I make really nice bars for headway if you wanna try some out for a discounted price lmk

@ParkerTheBasshead

4 жыл бұрын

Yeah man! Email me at Parker.dacchille@gmail.com

NICE BRO!!!

Gonna be running two xt sound 6.5 in my dodge Dakota sealed for now then I'll get to portinf it later on once I get more subs to add

That’s crazy for two 6.5’s

Little baby subs are pretty cool. But I want to see some 15s or 18s! (21s?!?)

I put 6000 watts to my 6.5 all the time. Yours must be broken. LOL what did you think would happen when you put 6000 watts to 6.5? Awesome video

How much do these subs run?

Nice for a 6.5 sub!

"That is called 'Sent'" PROPER!

How much do those subs cost?

6th order ftw!

May i suggest a decaware deathbox.

Can you do a planet audio review

what app are you using

That’s awesome. 145.6 I think you said . Crazy 6.5s

Holy cow imagine if you had 8 of those . 4 pairs. Each pair on it's own amp?

@1-Six-dee

4 жыл бұрын

I wouldn't think this is a musical application this was designed for spl to get loud at one specific frequency all these videos coming out of these little subs being so loud is very specific to that frequency and applications and wouldn't be a daily musical build

@Shaggy4hire

4 жыл бұрын

I know. I should have elaborated more. Each pair could be tuned an octave away from each other. Or even in 5 hz increments. Starting at 35 hz then go up but not above 55. So the over all roll off is spread out more for more bandwidth. Does my idea sound good or am I lost lol

@1-Six-dee

4 жыл бұрын

@@Shaggy4hire I gotcha some sixth orders can achieve that and dsp can do that if done well a lot of home audio subs have correctiom factors that keep the db same across 25-80 so it will not be peaky af

@Shaggy4hire

4 жыл бұрын

Ok. I'll have to check out 6th orders. I'm a traditional slot port guy lol

Jesus... These two 6.5" subs are smacking harder than the 4 12" subs from your recent Wal-Mart build... That's crazy...

I have 2 ap bdc4 12s on 5k rms and they eat it up no problem but they do bottom out under 26 hz

I can't find any info online, does anyone know the motor weight of a Zv4 15?

@jameslewis974

4 жыл бұрын

Check out Resilient Sounds there platnuim series motor weight is about 62-64 lbs there team series is a 142 lb with 9 spiders and about a grand cheaper than a sundown team

Hey I have a question, where can I get the wattage measure thing bc I don’t think my sub is wired down to one ohm.

@ParkerTheBasshead

4 жыл бұрын

You can test the impedance of your subs with a multi meter

@Dr_Decaf

4 жыл бұрын

Parker Dacchille ok is it bad if my sub is wired to one ohm? Or is it safer to stay at two ohms

How much for that 6th order enclosure plan? Seriously!

One day when I get all the tools I'm going to experiment with building bandpass enclosures.

What do these subs sell four and who sells them please comment back thank you

What is app?

So Noob question 🤔.... Are these types of boxes meant primarily for competition ? Or could you run a setup like this on the daily with all types of music 🤷‍♂️

@EagleTheBirdman

4 жыл бұрын

Can run daily just fine

Isnt that a 4th order ? one sealed and one ported chamber? Or did i miss the second port in the other chamber? But anyway that is impressive

@ParkerTheBasshead

4 жыл бұрын

Yeah sorry didn’t show the other port very well in the video

Theres a boss puck in my c class that has two small 4” drivers or something and actually shakes the car fairly well considering what it is. Its only like 10” in diameter and 3” tall or so.

Price???? Website not working

I’m trying to run 2 psi platform 2 12s high performance 1800 watts rms any amp suggestions?? I’m thinking a taramps md 5000

@EagleTheBirdman

4 жыл бұрын

Get better subs

@justjay6151

4 жыл бұрын

Lol 😂 stop 🛑

@kingwillie206

4 жыл бұрын

That sounds like a good match as long as you set your amp gain and deck are set properly. Don’t “wing it” and ruin your equipment. Take it to a pro and have them set everything properly and let you know how far you can turn it up without clipping.