🔥Full Video👉 kzread.info/dash/bejne/o6eKvKycabPKc84.html

@antonfloor344

Жыл бұрын

Nice beat

I bet the heat treatment process for the anvil and hammer took awhile to figure out. It's gotta be really hard to not deform at all while also not able to chip or break chunks away.

@angelcelis9090

Жыл бұрын

Heat treating did almost nothing for that lol.

@northcountrywoodcraftny5953

Жыл бұрын

​@@angelcelis9090 it's metallurgy, they definitely heat treated those steel parts to a very specific spec otherwise the steel would be too soft or too brittle, it's also important what alloy to use for each component to get longevity.

@dunderdee

Жыл бұрын

chinese products: ha window steel go brr

@novavolks9652

Жыл бұрын

​@@dunderdee I tried them and the alloy is good, the plastic is cheap but the metal is not

@CountChokcula

Жыл бұрын

Probably your regular austenic steel. As long as the stress is kept below the endurance limit, it shouldn't fracture

The power of modern metallurgy!

@Random-ed2xf

9 күн бұрын

And yet wrong socket type.

So that's how they work... huh. I'd always wondered. Cool short. Thanks for posting - you've made my day a little brighter.

@ErCanEverything

Жыл бұрын

I'm glad you liked it my Friend🙂

@ErCanEverything

Жыл бұрын

There is also a long video that I left a link to in the first pinned comment🙂

@randygonzalez6250

8 ай бұрын

It's simpler than I thought, more a marvel of material science than engineering.

It's amazing how long these hold up.

@nickduplaga507

Жыл бұрын

It’s equivalent of using a hammer on an anvil.

@BizlaC

Жыл бұрын

@@nickduplaga507 thousands of hits per minute, it's not really that comparable.

@nickduplaga507

Жыл бұрын

@@BizlaC Nah you can hit a hammer against an anvil similarly, not enough heat to change the metal. Blacksmith hammers, and anvils last a long time probably survive more hits than the impact wrench anvil, and while hitting heated metal.

@gamz83

Жыл бұрын

пока не расплющится

@seniorrobinzon1619

8 ай бұрын

Достаточно долго, отличный инструмент!!!😊

Вот спасибо большое! Это лучшее объяснение без слов! Сохраню на память! Успехов!

@Sam-ls6sl

7 ай бұрын

Thank you, have a good day

That's a cool video. I've been a mechanic for 35 years and never seen the action in action from the inside or in slo-mo. Thank you. 😊

😳 No wonder cheap ones fuck up so quickly, it's literally bashing that cog all the time, so inferior materials won't last, if I understood that correctly...

I’ve read so many bad descriptions of this but seeing it answers the question - Thank you so much!

Спасибо, теперь я знаю как это работает!)))

@ErCanEverything

Жыл бұрын

I'm glad you liked it my Friend🙂🤝

@user-qc5xz8mz1v

Жыл бұрын

На самом деле там Фиксики крутят гайковёрт

@UzielXXX

Жыл бұрын

​@@user-qc5xz8mz1v но это советский секрет

Slow-mo works well for when the non impact socket explodes too!

@davekleiboeker4614

Жыл бұрын

😮Depends on what it’s used for

Excellent, we need more videos about this types of subject . Engineering guys love this

Anvil: You Hammer: Life What a beautiful yet dramatic piece of art by Everything, ErCan - 2023

Finally a short actually worth watching! 👍👍👍

Parkside tools look so slick

@ErCanEverything

Жыл бұрын

And cheapy🙂

@malaom86

Жыл бұрын

Black parkside

@NikolaMarkaovic

Жыл бұрын

​@@malaom86 i have the green hammer 4Ah rated 450N, so far so good. But i heard that black ones are better.

@soisun2658

10 ай бұрын

​@@NikolaMarkaovic Yes. The black ones goes up to 1356 NM, but they only have three power steps: 100 or 150 (not sure), 400, 1356 Nm. So if you want to screw the wheel bolts of a car, none of them is appropriate. the first one might be too low, the other ones, too high.

Awsome video! I wanna do something like that 😀 Thanks for the video!

@ErCanEverything

Жыл бұрын

I'm glad if you liked it my Friend🙂🤝🤝🤝

Спасибо, отличное видео. Это самое полезное что я видел ща последнюю неделю.

Make sure to use an impact socket too. They’re typically black and really thick or on snap on ones specifically look for a man with safety glasses symbol, that indicates it can be used for impacts. Using non impacts can damage and crack regular sockets

God Bless you engineer and inventor

Инопланетные технологии. Лайк за съёмку.

Great video man, thank you 👍🏻

@ErCanEverything

Жыл бұрын

I'm glad you liked it my Friend🙂🤝🍀

Вот оно как работает, оказывается!

Эпично, и прям завораживает)

@stevecariggillio4139

Жыл бұрын

Bless you!

This awesome I definitely understand it now

and to think i wasnt happy my 20 year old harbor freight impact just died in the fall last year...holy hell is that VIOLENT in there. thank you for this :-)

Wreszcie zobaczyłem jak pracuje taki klucz

Excellent. That's exactly what I was going to look for on the web

The metallurgy of this part is amazing... ❤

Looks like the spider gears in my rear differential.

Melhor vídeo se explicação desse processo que já vi 👏🏻👏🏻👏🏻👏🏻

I used these back in 2003 had a drive size of 1inch 3/4 or inch. These were big had to hold with 2 hands! Ive now got white finger last year been in construction for 21 yrs. I think vibration on the bigger guns were high

The engineering is amazing ❤.

Excelente gracias por la clara y grafica explicación!

Glad I have the Milwaukee fuel and the proper matte black sockets. Love my M12 fuel 3/8th stubby and 3/8th drive impact sockets.

Ах так вот как оно работает👍

Hay quá bạn ơi bây giờ mới biết nó hoạt động thế nào cảm ơn bạn đã cho xem clip này

Thank you for letting us know about the function process of this

Wow it kind of has a hammering like effect!

Gracias por mostrarlo. Saludos.

Thanks... Now I can sleep better 😴

@ErCanEverything

10 ай бұрын

😂

It's just amazing that impacts the last as long as they do

Una maravilla no me canso de mirar.

@ErCanEverything

Жыл бұрын

I'm glad you liked it my Friend🙂🤝🍀

Wow.. thats one of the few things i never have taken appart to see how it works..

Właśnie się zastanawiałem jak to działa :) 😅

😊 thank you bro

Lol the beginning sound effect sounds like when Brian from Family Guy was dating the blind girl and was making that fadoo fadoo sound for a helicopter 🤣🤣

Que buen video!!! Siempre me pregunte cómo funcionaba!!!

In Atlas Copco Ergo Pulse wrench this "hammer" system is hydraulic.

was expecting sparks. maybe that's why they last, no spark, no part's removed/chipped away. awesome video

@andersen732

Жыл бұрын

Там все в масле, а бывает еще и в гидрованне.

@ShuotongLi

Жыл бұрын

The sparks you saw from power tools are from the clutch and brushed motor.

very useful video , thank you

Thanks bro 🎉🎉

При замедленной съемке, прям как саунд трек к Терминатору 2😂

Still ain’t get my crank pulley off 😂

This explains it, Just yesterday I was wondering how the motor doesn't stalls,

Video çok güzel emeğine sağlık

@ErCanEverything

Жыл бұрын

Teşekkür ederim Dostum🙂🤝

Полезное и интересное видео!

Nice to see the uga dugga in action

Çok sağolun.

I wish my life was strong as these cranks

@ErCanEverything

Жыл бұрын

In what sense? Everything gets easier if you don't think negatively🙂

I think it would have 50-70% more power if it could spin 2-3times before hitting the anvil. It would transfer more energy from the motor. This could be achieved by sensors and actuator what pushes the hammer down on the anvil. 😊

@davidperry4013

10 ай бұрын

or use a spring with a low enough spring constant and a long enough travel to allow the anvil to float longer.

Looks like a good tool to close my oil drain plug. Don’t want any oil leaking.

Thank akhirnya bisa tau cara kerja impact 😊

Tienes un suscriptor más 🎉

@ErCanEverything

Жыл бұрын

Thank you my Friend🙏🙂🤝🤝🤝

Realmente uma ferramenta essencial é indispensavel atualmente,mais até chegar na dureza necessária foi um desafio...

That's cool.

Maravilloso 👌👌👌 más videos así!!

Вот недавно как раз думал, как оно работает. Интересное решение, да.

please do the milwaukee electric nail gun next i have to know lmao

One minute video explains a lot

That's exactly what I think about when my neighbor asks me for tools.

Merci beaucoup 😮

So something that I see in the comments that’s a misconception is the idea that this is some massive impact. It’s actually not. It’s more like a slight nudge. Those pieces are purposefully angled so that they slip. So they’re not really slamming into each other that hard. They’re really just hitting the anvil piece so many times that it’s forced to nudge into place. Which is why impact drivers work so well for torque.

there are people out there with big brain

я увидел что столько лет искал, можно выкидывать комп, и наслаждаться жизнью...

Awesom👏👏👏👏👏👏👏

I've always wondered how these work!

Спасибо автору. Мне было интересно как это работает . Теперь знаю. Единственное по видео на понятно как молоток возвращается в верхнее положение.

@user-dw6uj9vk4t

Жыл бұрын

Там мощная пружина, чтобы всё успело быстро сработать вверх и вниз. А возвращается потому что на оси вращения молота есть две проточки примерно как половина синусоиды, а сверху самого молота точно такие же ответные пазы. В проточках стоит по одному шарику от подшипника. При вращении под нагрузкой пружина сжимает и опускает молот по этим направляющим. Молот свободно проворачивается, разгоняясь и пружина по этим же проточкам толкает его обратно. Ну и как ты видишь, уже с силой бьет по наковальням.

@user-dw6uj9vk4t

Жыл бұрын

Есть другой принцип работы, кстати. Он основан на центробежной силе, но молоток опускается и поднимается также под действием пружины. Но похоже система устаревшая, такие редко кто делает.

這發明真的讓人覺得好用

stimmt ... 'ne Flatterbacke wollte ich noch kaufen ...

Excelente

Sempre quis saber como essa máquina funcionava, vlw

Do you have a slow mo of an air impact hammer?

Thank you. I really wanted to know. Also doesn't that have a lot of steel rubbing together though?

Ooo, parkside 😁

Very interesting! Always wondered that 😮

Thank You 🙏🏻

Que top nunca imaginei que seria assim

Круто показал.

How much for the camera? I need one so bad

@ErCanEverything

Жыл бұрын

I shot this using Samsung Galaxy S22 Ultra🙂

@anvi5558

Жыл бұрын

Canon

ใช้มาตั้งนานไม่เคยรู้เลยว่ามันทำงานยังงัย.อ่ะ😃😁😲😮🙄แจ๋วเลย

Наконец-то 👌🤝✌🤘🤜🤛

The hardest part for me as a person who loves my tools. The lack of a proper impact socket 😳

@ErCanEverything

Жыл бұрын

This is a fact🤦😔

@SayNO2CAMEABUSE

Жыл бұрын

@@ErCanEverything cant count how many times i being an impact socket to an impact that doesnt work and it works every time. 😔

@ErCanEverything

Жыл бұрын

It is true that there is a very big difference between a quality and a cheap sockets, but here I used about 20% impact power to be able to shoot good shots in slow motion. Otherwise, in the first pinned comment I left a link to the long video and it is shown in more detail there.

@SayNO2CAMEABUSE

Жыл бұрын

@@ErCanEverything science you can trust

@TheMRSTEVEN

Жыл бұрын

Christ! Can't even do a demo video without someone moaning about the socket.

That's what she said...hammer on it big boy😅

Looks like in the first half, the socket is being loosened or turned counter-clockwise; but in the 2nd half, it looks to be turning clockwise or tightening.

nah. i can sleep well now. thank you

@ErCanEverything

10 ай бұрын

😂

I'm even more confused it was turning the opposite way

@panda3d180

Жыл бұрын

I think it's something to do with conservation of momentum and any frictional and bonding forces. You use an impact to loosen fasteners that have rust, stretched out a lot to other surfaces, or oxidized with other surfaces. These increase the chance of chemical interactions that keep them stuck together. The fastener is connected to an object of a higher mass than any rotating body of the impact. So any momentum put into the impact driver, fastener(with the object it is fastened to) system has to be conserved. Initially(let's say a positive value) the tiny rotating object of the impact driver hits the lower portion. The lower body, fastener and the fastened object will have a very small positive velocity. The small masses from the loosen of chemical bonds between the fastener and fastened object have broken off and have a high positive velocity. These positive momentum objects need to sum to a momentum with the negative final momentum of the impact driver to be the initial momentum. Basically, there is such a high mass and high holding forced with the fastener and fastened object, the rotating object of the impact driver bounces back. The impact bouncing back is more favorable because it hints at a higher loosening force since a greater change in velocity.

Power of Angular momentum

Thanks for the very useful video

Amazing broo...😮

Super