Hello there, finally I made this video! Many have asked for it and I'm happy to show you how I do it :) However... of course I forgot to mention one little detail, so just another tip: before you slide your negative into the holder you will need to decide which side to scan. If you look carefully you will see that one side is shiny and the other is matt (it's still shiny, but less). On B&W film it is obvious, on colour film you will ususaly need to look a bit closer. Anyway, as far as I know it is best to scan the matt side to capture maximum detail and also avoid reflections. And btw. just want to thank Urth again for partnering with me in the video - their adapter has really been a wonderful tool for me, but something I didn't mention is that you can not only use these for scanning, but of course they are a great way to adapt unique stylistic lenses to your digital cameras to get make use of the pleasing characteristics many old lenses have :) You can check out their adapters here: actv.at/VYd/84770 Have a good week, Teo

@apb_london

Жыл бұрын

I’m interested you say scan the Matt side, never thought of that. Two things though, first - the picture will need flipping. Not had reflection issues if overhead lights turned off. When I scan next time, I will try both ways - thanks for the suggestion.

@prakashsatam7630

7 ай бұрын

Yes. I m using this technique for last 50 years.

@yan.travels

Ай бұрын

Bruvvv! i always thought you had a darkroom for yourself.

There's a trick to level your camera, you can use a small mirror and place it on top of where the film will be and once the reflection of your lens is in in the middle of the frame of your camera, it is perfectly leveled.

@teocrawford

Жыл бұрын

Ahhh that's such a smart trick haha, thanks!

@Robstrap

7 ай бұрын

Or just buy a small level

@Leicam10

6 ай бұрын

Or use your smartphone

@Googlypat

5 ай бұрын

Or just eyeball it

For anyone that doesn’t have a macro lens, check out the vintage Nikon 55mm 2.8ais or 3.5ai lenses. You can find them below a $100 or even dirt cheap and they are magnificent for this purpose. Very weird for me to get that level of sharpness from a late 70’s lens. Mind that they’re 1:2 magnification but with Nikon’s own tube they become 1:1. I scan 35mm negatives with a crop camera and at the minimum focus distance the film frame almost covers the whole picture. Either use a Nikon body or any mirrorless one with an adapter for the Nikon F. Cheers!

@ronaldm5609

4 ай бұрын

This is my exact setup with a crop sensor camera and Nikons “m2” extension tube. Works bloody wonders

I did this myself two years ago to capture slides and negatives. I'm not a regular Gimp user, but I found that Gimp's Color->Invert function worked very well to get regular images back from the negatives.

Oh man, so cool to see you shouting out Urth. You're spot on about the build quality. I have a bunch of their adapters including their Canon EF to Sony E mount adapter. I use it with a 40mm 2.8 canon pancake and the autofocus is so fast and so precise despite the adapter. Love their stuff.

Love the quiet vibe from your videos and your voice! So enjoyable to learn about photography in your channel!

I love how concise you are in your videos! As someone who is new to the world of film photography, it is super overwhelming! But you really take the time to organize and explain everything in a way that’s super approachable! Thank you so much!

@viewfinderthis

7 ай бұрын

Couldn’t agree more ! Just started getting into film myself

Tank you soooooo much for the tips to invert the colors in Lightroom, that looks now quite easy for me to obtain nice results !

Thank you, so well explained, precisely done with your gentle manner.

Haha. I used a coffee tin as a "rostrum" and a cheap light panel from amazon. The coffee tin had a plastic cover from which I cut out a circle that connected to the camera lens. I painted the interior with black paint. I used Kodachrome 64 for much of my photography, then Fujichrome Provia 100 for my trip to the Seychelles. (back in the 1980s). Of course I had to wait many years before I could view these images on a computer screen. The only decent option back then was a Cibachrome print. I still have the film, and the Cibachrome prints I took from it. Cibachrome is the best.

Just getting into photography and I found your channel I love your videos! Your videos have helped me learn a lot!

@teocrawford

Жыл бұрын

Ohh great, happy to hear that!🤗🙏🏼

Perfect. Thanks. I have tons of old 35mm... I would never have thought of this, or known how to do it!

Nicely done. Well explained.

If you want a cheap stand get a used photographic enlarger. They can be had for a song. Most enlargers let you take the head off and you have a baseboard, a column and the mechanism that was originally used to move the head up or down. Fix your camera instead of the head and there you are. Far easier to handle than a tripod and, above all, far easier to adjust.

Thx for these explanations! I just got a Hasselblad 500c and de ided to try film photography, I may try home scanning with your method!

Great video and explanation ! I do it the same way. I started as well with the lomography scanning masks, was not happy with the handling and ended up just putting the film flat on the Kaiser slimlite and surround the frame with 4 Canon Akkus. Works well so far. Now and then Newton rings can be a problem but in about 95% it's fine. I do tethering via Wifi to my computer. I found it easier to judge the focussing on a bigger screen. When I am ready to take the shot, I magnify the photo X10, lift the mouse off the table and wait until nothing moves. then I click the mouse without touching anything. sometimes, 5 secs is not enough until everything is completely still. With a macro lens that close, every tiniest move looks like an earthquake on screen ;-) ..... I love your videos and the way you explain things. Thankx + keep em coming ! ....

Thank you for such a well-made and informative video! Looking forward to more of your videos. :)

@teocrawford

Жыл бұрын

Sure! Thank you for the kind comment :)

great video! your way of scan is totally same with mine... i'm still using lomography film holder and just ordered new essential film holder. i can't wait for it.

Holy moly your video is a vibe I love it

Just what I need right now! Thanks for this video :)

@teocrawford

Жыл бұрын

Ahh great, thanks for the kind comment!🙏🏼🤗

so lange auf dieses video gewartet, vielen dank für deinen aufwand und die offenbarung deines scan-prozesses✨

@teocrawford

Жыл бұрын

Hahaha sorry, dass es eine Weile gebraucht hat :,D Bitteschön! :)

The problem with the macro rings (extension tubes they're also called) is not the tubes themselves (unless you're getting uneven sharpness from side to side) but with the lens. Modern lenses are wonderful, but they are not normally corrected for flatness of field at very close range. As other people have mentioned, if you don't have access to a macro lens, a simple (but good quality) enlarger lens will be very good. As you're working at a fixed distance, it should be not too difficult to get some tubing that gives you sharp focus and satisfactory framing.

Best video anyone has done on this

been waiting for that for ages man!

@teocrawford

Жыл бұрын

Hahah I knooow, it took a while hehe😅🤗

@godlikee187

Жыл бұрын

@@teocrawford no worries :)

Another great video. I do much the same. A few thoughts. Use a cable release. Use smartphone level to level everything, the app is just there on my phone. I have marks on the tripod so I can just set it up without trying to work it out each time. All these speed things up. I mask the light box so the light only shines on the film. Nate has just launched his V2.4, no extra cost to those with a licence, that is Service… I love this analogue to digital and back, work flow. Have scanned old 1970s film, edited in Lightroom and photoshop and printed digital negatives for printing on Cyanotype and as large format in the darkroom.

Great video! Looks like I’ll be using that old lens I inherited… thanks to you.

wow cool ,i didn't know films could be converted like this. thnx for the video

Lovely! 😊 thank you

The problem with Extension tubes with a regular lens of some sort is that the field of sharp focus is not flat at close focus distances while a macro lens is designed to have a flat field of focus up close. Ie when the centre is sharp the edges are not and vice versa. Stopping down would reduce the problem but I chose to buy the Olympus 30mm macro which was quite low priced lens even for a M4/3. My solution for a negative holder was to use an old enlarger negative carrier. I built my copy stand from a old enlarger base. I got my led backlight from the hardware store. For software I use Affinity photo and Pixelmator Pro on my Mac and can invert them quickly. Mine are mostly old B&W negs from the 60s. Interesting to see how you went about it.

thank you for your insight on this topic :) at first i also had a struggle with scanning my negatives (essentially by using a scanner with an effective dpi of 900, which rendered the scans unusable since there was barely any sharpness at all), and had to decide whether to buy a new scanner or a dslr camera since i did not own one at the time. after a bit of research, i went with buying an opticfilm 8100 from plustek for about 250 euros and, i must say, am really content with its results, the only downside being that it only scans 35mm film. when i get to shooting 120 film i will definitely have to look out for a dslr camera and make myself comfortable with the process, thanks again for giving a rough overview over the topic!

@teocrawford

Жыл бұрын

Ohh cool, good to know that the Opticfilm can deliver :)) I see, well I'm happy I could give you this little overview🤗🙌🏼

Thanks for this video

@teocrawford

Жыл бұрын

Sure!🤗

Brilliant, Genius 😮😊

I see that your at 99 comments on this video… I thought I’d make it an easy 100, this video was super helpful, im just getting into film, I love it and your channel had helped a lot!

you don´t understand how this video helped me, I´m working in a Photostudio and we don´t have any scanner, but we have macro lenses, a lot of tripods and lights. THANK YOU

Thanks for wearing reclaimed clothes. I bought that shirt in the late 80's. Your the man x

Thank you!

Nice to see that Teo does it the same way I do and isn't using some fancy photo magic I didn't know about. He's just better at it that I am.

@teocrawford

Жыл бұрын

Ahh great, yeah my setup is pretty non-fancy, but it gets the job done :) Thanks for the kind comment!

Thanks for pointing me in the direction of Urth. I’ve been looking for an affordable and well-built adapter for using my Zuiko non-digital lenses with a 4:3 digital camera.

This was so helpful! I just sent some film in and it costs $70 to develop, and had me thinking I should start doing this myself 😅 Will def be rewatching this a few times when I start

@m-pbogner7980

Жыл бұрын

For developing and scannig of only one Roll? I started scanning with a plustek 8100, thats an affordable option too if you don't have a dslr or more importantly, the right lense. I paid about 175€ for mine used. The resolution in detail is not as high as labscans, but it's still really comparable.

A very well put together video. Make sure to give yourself at least two pats on the back. I was very pleased to learn about the film holder and have just ordered one and now I am looking at the light tables from Kaiser. I was looking to see information regarding which size you found most useful. Is the smallest size adequate for both 35mm and 120 film? Thanks again.

Nice work. To add to that ... In "digital photography" the elephant in the room is the "Bayer paradigm" (conspiracy?). Colour film has 3 layers on top of each other with subtractive filtering between them and consequently we have RGB at ~every coordinate. That idea is extremely hard to copy in sensors, at serious resolution, with excellent low light sensitivity and dynamic range. It has been attempted by Foveon, but they tanked, got taken over by Sigma, who released a couple cameras with a Foveon sensor but this also was a dead end street. None of Sigma's promises have been delivered on. And it remained "crop". In the Bayer paradigm, we use a colour-blind sensor (it's analogue, by the way) that sees the entire humanly visible spectrum (more). Each photocell (light sensitive diode) has a circuit to store a charge that builds under exposure, as an analogue value, and taking a photo means that all these values are measured and Digital-to-Analogue (DA) converted. Each of these cells with a circuit is a "photosite". In old black & white film terms, the Bayer sensor is panchromatic (pan=call, chromatic=colour), but we have no "colour" yet. Mr. Bayer solved this by proposing a colour filter grid over the sensor that precisely aligns with the sensor grid of squares. Each 2*2 "photosites" would be filtered (counter) clock-wise red, green, blue, green (RGBG). This makes each photosite monochrome in that it only sees one colour (mono=one, single) and this also applies to the raw file. Each photosite measures a light level and the data elements in the raw file are labelled with one of R, G, B. Neither the sensor nor the raw file, in this sense, have pixels (PICture ELementS), because to display a picture we want RGB pixels. Note that shooting B&W with a camera like this, we still start with a raw colour file of monochrome data elements and the B&W conversion makes the RGB conversion first. We can call the raw file "Bayerised" and Mr. Bayer proposed a simple form of guessing the missing colours as "deBayerisation". The Bayerised raw file is extremely noisy - 100% noise in fact and we can call this "Bayer noise". Mr. Bayer's deBayerisation works well at rather low resolutions, but deBayerisation based on old-school AI generates "digital artefacts" that become visible at higher resolutions. The best known is "Moiré", but crinkly lines at the pixel peep level, and colour cross-bleeding at edges between colour blobs are in there as well. These effects are called "mosaic" and with increasing resolution, it became opportune to remove them in "demosaicking" - or I would argue it is better to prevent them in the deBayerisation. The challenge with this entire process is that all RGB pixels we create are 100% the result of "guessing", even when we can do that without generating digital artefacts. There are two deeper phenomena here and that is that cameras may use a second filter layer over the sensor to help this colour guessing: OLPF (AKA Anti-Aliasing or AA-filter). The OLPF disperses a bit of light travelling to photosite [x,y] so as to hit the direct neighbours. This OLPF aspect makes colour guessing with less noise easier. It, AA-filter aspect, also helps reduce jagged lines/edges following from the grid of rectangles in the sensor. Second there's the question of Bayer noise. As the assumption is that we get "perfect" RGB pixels after deBayerisation and demosaicking, we still may see grain or noise in our images. I would call this, generally, "failed or inadequate deBayerisation". When you shoot the Milky Way, it is valid to talk about not enough photons, maybe, but in most other photography a discussion about photons distracts from the Bayer paradigm. We see the failed deBayerisation more in the blurry zones, low contrast zones, darker zones of our images. And call it colour noise and/or luminance noise, thus by blaming the camera helping lazy software developers that need to give us better raw processing (conversion). Applying inadequate deBayerisation, you will see the Bayer noise more in images from cameras that have done away with the OLPF because software developers have been lazy indeed. Adobe spent the past decade on programming new versions of old software in new platforms (like mobile) rather than giving their prime stakeholders (paying the annual subscription) better raw processing (in Adobe Camera Raw). Nikon Eliminated the OLPF from the D800 (36MP) in the - ceteris paribus - D800E (36MP). The gain in image quality is shocking. But ACR only got its "Enhance AI Denoise" added as option last year, as a way to improve on Bayer noise (note that "detail" is a separate quality). What about scanning? Now we understand the Bayer paradigm, we have to know that scanners don't need to work in the Bayer paradigm. But if they do or don't is a matter of physical design and drivers and software with the scanner, plus parameter settings. In the case of "scanning" there is a notion of a travelling-over-the-original sensor that may "read" each coordinate with red, green, and blue and next stacks these separate values into RGB. "Multi pass" then will increase resolution and reduce uncertainties about colours. While your camera's Bayer raw file may be 14 bits, these are monochrome bits and the resulting RGB pixel on your monitor/display is probably 21 (3*7) or 24 (3*8) bits - where 24 of the 24 will result from guessing. ACR converts your 14 bits raw file into 3*16 bits per channel = 48 bits per pixel in ProPhoto colour space, but as ACR (or Lightroom Classic - LrC, or Photoshop - Ps) depicts it, that gradation resolution is compressed again. In Ps we can by the way convert the 3* 16 into 32 bits per channel (3*32=96 per pixel). From scanners, we may want to get, say, 16 bits per channel (native 48 per pixel) RGB TIFF files. This is orders of magnitude more precise than 14 bits monochrome from a camera. Reproduction of film-photographic images with a digital camera So with a digital camera we do not "scan". We shoot a raw file and this then has to be raw processed in order to get RGB pixels - an image we would like to see. The raw processing may be done in camera when we shoot JPEG, or in post, in ACR or C1 or ... . Part of the digitising, often, is colour reversal If we have colour or B&W negatives, then we not only need to reproduce the negative but also reverse the resulting negative image. The simplest approach is to import the image into ACR (the Develop tab in LrC is ACR) and swap the black and white points on the vertical axis. That makes a negative positive, but there's more work to do. You might want to buy NegativeLab Pro for that purpose (as the video illustrates). Colour negative film uses an amber coloured carrier film as a way to suppress noise and that colour needs to be subtracted. The negative may seem to have a narrow histogram - high contrast. If your maths are any good, note we work on a base-2-log scale in digital and exposure, but in film we worked on a 10-base-log scale when gradation, contrast, and contrast envelope were concerned. 4.5 on a 10-log scale is about 15 EV. The human eye works in 10-log too. Scanning Digital cameras? A handful of digital cameras can do something called "pixel shift". The idea is that we can get rid of Bayer noise by shooting 3 or more shots of a motionless subject and between shots shift the sensor precisely over a photosite pitch. One horizontal shift adds red to a previously green photosite coordinate and another shift would add blue for that coordinate. These separate shots then need to be stacked in post. Shooting more frames and making half photosite-pitch steps then removes more uncertainty and adds detail resolution. Gradation resolution will be great. And detail resolution too. My recently acquired Nikon Z camera can shoot up to 32 frames per original that I reproduce. We could argue that with pixel shift the digital camera actually scans the original frame. I don't know if the stacking in post is done in the raw domain, or relies on actual deBayerised RGB frames. Whatever the approach, the multi-pass pixel-shift approach takes uncertainty away, and with that, Bayer noise. Adjusting the camera - not really One way to get a negative parallel to the sensor is to use a negative/slide copier. I bought a Nikon one for my Nikon Z. A simple tube to be mounted on the lens using filter thread on one end and a simple negative/slide holder on the other. It's not too expensive, but finicky (sub-optimal design) and only holds 35mm film or slides. For my "6*9" (cm) negatives I need another solution. Also it was designed for use with a 50mm..60mm macro lens and I bought the far superior 105mm/2.8S. The latter's much longer focal length means that the tube connecting the film holder directly to the lens must be longer and Nikon has no extension for this. I bought a stack of $3/ea UV filters with aluminium ring, broke the glass out, and terminated either end with brass rings from slightly more expensive filters. Works like a breeze. And doesn't even look like Micky Mouse DIY. (Alu tends to lock itself and damage the counter thread, brass has self-lubricating properties.) Adjusting the camera - really If you shoot your reproductions from tripod, then you need to look into a geared tripod head. The NY, NY superstore sells a Sunwayfoto for about US$220 ex sales tax. It's not about tricks to get the camera right/level, but about making small controlled adjustments that are difficult to make with ball or video heads.

I just adapted a couple different enlarger lenses because they are already macro and they are also flat field lenses specifically for enlarging so the edges are always square and flat. No distortion. To get in closer if you need you can use an extension tube which will not interfere with the flat field lens. Not all macro lenses are flat field lenses. I have two. One I like better than the other. I just use a true white light behind a frosted glass for the light table. It works. Yes, keep the ambient light away. I use fast shutter speeds to prevent blurring. Not sure why you chose long shutter speeds. F11 is a good spot. Good tip on which side to scan. Focusing on the emulsion side will result in sharper images. If you have to focus through the thickness of the film it can cause sharpness issues. Be sure you turn your image to the correct orientation after you take your image or the right will be the left and... you know. Backwards. You will know if there are any printed words.

@abittwisted

7 ай бұрын

I use Affinity Photo.

Awesome guide, you thought of everything to explain! How do you deal with hair and dust on the film? Do you have any special tips about that? :)

So I was gonna try starting to shoot with 35mm soon. Would've never thought about using a digital camera or scanner and just invert the colour in a photo editor! Probably save me a lot of money I'm sure

Awesome to know.

After all the videos with computer-generated voices, I have to compliment you on your rich, deep, voice, enhanced (for those of us on the left side of the pond) with a cultured British accent.

You may be getting some diffraction scanning at f/16, I assume you've done your research and tested I just never personally go beyond f/11 because I find the fall off to be pretty dramatic. Great video!

@lensman5762

Жыл бұрын

If one was using a decent ' macro ' lens, the chances are that the lens would be well corrected for filed curvature, chromatic aberrations and peripheral illumination, therefore two stops down from the widest aperture is where the optimal performance of the lens is, around F8~F9. Considerations of DOF do not really arise as a properly held flat negative or transparency does not require huge DOF to maintain sharp focus across the frame. Yes you are correct, F16 is well into the diffraction zone of most 35mm macro lenses.

@teocrawford

Жыл бұрын

Ahhh yes, I've just totally gotten used to scanning at f.16, which is actually just an old habit from when I was still figuring the process out. I was closing the aperture to gain DOF to ensure that everything is sharp, even if the setup slightly moves. I better check on that haha thanks for pointing this out!

Great video Teo! I have tried both scanning with my Epson V600 and my Sony A7III with a vintage macro lens. I would say the actual scanning is very slow on the Epson (especially at higher resolutions). But the workflow for DSLR/mirrorless scanning was too clunky for me. For now, I'll stick with my Epson V600 and just work on other things while the scans are processing. I would love to get my hands on a Noritsu scanner someday!

@pancakelens75

Жыл бұрын

You and I sound like we have had EXACTLY the same experience! I used to scan with my Sony A7rII with an old macro lens and it was far too clunky and a hassle to set up/break down. Conversely, I have had an excellent experience I’ve switched to an Epson V600. You’re so right about it being slow and now and then I have had to clean the Epson’s sensors a couple times when it started producing that dreaded scan-line in the images. People whine about their lack of quality, but I recently had a print made of a photo I took with my Mamiya 645 that I scanned with my V600 and it turned out beautiful, was accepted in a juried art show and even sold on opening night. So I suppose everyone’s experience can be different

@ReimannPembroke

Жыл бұрын

@@pancakelens75 I agree with all that! I think the V600 does particularly well at scanning 120 film!!

@teocrawford

Жыл бұрын

Thanks Reimann! :)) Ahh I get what you mean, that's the beauty I guess that we at least have the choice depending on our preferences :D And ohhh yes, I hope you get your hands on one some day!

@marike1100

Жыл бұрын

A Noritsu? I’d settle for a Nikon Coolscan 9000. 🤣

@qiuhongyu1274

10 ай бұрын

@@pancakelens75 v600 makes beautiful 120 scans but 35mm is quite poor...I'm doing the opposite, trasitioning from v600 to something else (for 35mm only)

That’s awesome. Thanks for the video. Can I ask what brand and model is your tripod? I couldn’t find it listed in the thumbnail. Thanks so much.

Hi, very interesting video especially for the end2end workflow. I am going to do a similar setup, the time I need with my epson v600 is too much. What about the quality of the scan using a good macro lens, such as the nikkor 55mm micro or something like that? Can you clear distinguish the film grain of a 400 film? Thanks again.

Hey danke! Tolles Video, hat mir sehr geholfen! Lg aus OÖ

Спасибо, выручил ❣

Using a digital camera to make a digital file of a 35mm negative or transparency is an efficient way of digitizing 35mm negs. The problem is, if and when the photographer moves beyond 35mm into MF or even LF format photography. Here the limitations of using a digital camera become more obvious and this where flatbed scanners ( there is really only one TBH, that can cope with MF and LF and that is the Epson V850 ) come into their own. With regret Nikon has long stopped producing their superb line of Coolscan ED scanners and what there is on the used market are priced beyond reasonable. I have experimented quite a bit with using digital cameras to digitize some of my negs, and a camera with a full frame of about 20MP can extract all the information from even the most high res films such as Ilford PanF or Rollei 80S. Your method is adequate and will produce decent results. Another alternative is what we old timers used in the film era to copy slides, and that is to use a decent enlarging lens in reverse. This can save a lot of money if you managed to find an EL Nikkor, Schnieder or Rodenstock lens of about 80mm.

Now I understand how much trouble I'm in choosing Film Photography😭

Good thing to get a perfect flat image is to get some step up filters and soms lens hoods. And i managed to get my vivitar 55mm 2.8 perfectly aligned and it rest on the film holder. Perfectly flat images. And no accidentally bumpbs to the tripod what resets your alignment…

Oh hey, I have the same negative holder. its ok. its a bit rough switching formats but as long as I dont change anything its great for 35mm

@teocrawford

Жыл бұрын

Ahh ok, I haven't experienced switching formats yet :)

Always custom white balance your camera to the light box you're using. I've been doing all my negative/transparency digital conversion copy work like this for 20 years. DO wish someone (Luminar) would come up with a faster, easier color conversion however.

Excellent video! Which side does the negative face the lens? Being new to this I noticed the negatives have a dull side. Thanks

@teocrawford

10 ай бұрын

Ideally have the matte side face the camera, not the glossy side. That usually means that you‘ll be photographing the image mirrored which you can then just change in Lightroom by hitting right click - transform - flip horizontal.🙌🏼

What white balance setting do you use on your camera while shooting? Great videos, by the way!

What is the make of tripod you have? I also have a Sony A7iii and have just ordered my first film camera the Pentax K1000. Love the idea of scanning film at home, so the inverted tripod would be a great idea! Thanks for the really informative video

I have a hard drive with 18000 photos in a drawer. Longing for the days of old I bought a film camera, only to discover that in 2023 i need to take digital pictures of my pictures and store them on a hard drive in my drawer. The teeth of technology have a deep hold these days. Great content though, not a slight on you rather the state of the world

proper diction. good job!

nice one ... cheers ... quick question (maybe already asked but I could not find a hint or link) what specific tripod do you use here? thanks

Thanks for the amazing video Teo! What kind of tripod are you using? I did not see that or the lightbox listed with the equipment links below. Any assistance would be awesome. Thanks again. Peace, Love, and Happiness!!! 🙃

@JoachimPersonalAccount

Жыл бұрын

Manfrotto BeFree

@denson28y

Жыл бұрын

@@JoachimPersonalAccount Thank you!

If you dont have bubble level use a mirror. Place a mirror on the the surface of the film holder, then you can aim your camera into the reflection. That way even if the table / holder is not level the camera still is dead on with it.

@teocrawford

Жыл бұрын

Ahhh true, what a smart trick, thanks!

This tutorial is impressive Just love the way you make thing so easy to do With the A7, are you shooting in jpeg or raw ?

@teocrawford

Жыл бұрын

Aww thanks!☺️ Ohh definitely raw, it‘s vital for this process to maximise the information you capture with the camera!🙌🏼

also, what kind of tripod is that.. im looking to buy one myself. thanks in advance

F16 or even f11 will introduce the effect of defraction into an image, I personally use f5.6 to f8 on my lenses for the best image quality

@teocrawford

Жыл бұрын

Yes, trueee! I totally forgot that using f16 is just an old habit of mine from when I was figuring the process out. I need to check on that :D

@PhilJonesIII

2 ай бұрын

The subject is perfectly flat so, I use the widest aperture possible.

i made it the same way but then i found a epson v750 pro for only 10€ at a flewmarket and i love the results! :)

@teocrawford

Жыл бұрын

WHAT!? 10€!? What a snack haha!

That light leaks which you see on 3:28 are from the lens of your camera. My advice. Cover part of your light pad you are not using currently so its light will not be reflected on the lens of your camera. Second - use lens hood do filter side light. And there will be not light leaks)

@teocrawford

Жыл бұрын

I did that, that is why my lighttable is so dirty haha, however that didn't solve the problem for me :(

What do you think of the KODAK Slide N SCAN, is it worth it? I wanted to buy a scan to develop my Kodak h35n films but I didn't want something very expensive. I prefer something more accessible and practical, what do you recommend?

His voice puts me to sleep, not a bad thing..I haven’t finished the video yet but brb gonna nap rq. Quite informative so far..

Have you tried a reversal ring for maco photography ?

Did you try a reversal lens mount for scanning?

Nice video man. Very helpful. How about using a tablet as light source?

@teocrawford

Жыл бұрын

Thank you!🤗 That should work too! Maybe just be careful that you don't end up with visible pixels in your scans🙌🏼

@petervanderstock7636

Жыл бұрын

@@teocrawford You are right. Worth a try

Good video. I'm a busy body old photographer who should be doing something else... The film holder you bought and the slow work flow using a scanner really frames the issue. The only way these things have ever worked is on jobs with only a few pieces of film to scan, or if you have an employee and they just have to do it. I've had scanners, they never work our. Too time consuming. Photo gear is great but invariably stupid. (Manfrotto tripod, requires special shoes. I have a couple. But no place on the tripod to store spare shoes. Mind numbingly stupid. I drill holes in the knuckles and tap them with 1/4" -20 and screw on extra shoes. Right now my Nikon batteries are dead because my assistants put the chargers someplace. With my GoPro I can plug directly into the battery. ) For a camera support I'd suggest finding an old enlarger, one with a vertical post would be best. (I have a Besseler 4x5 enlarger, terrific but the 'post' is at an angle. It'd still work because you'll do one size format at a time. ) Tripods are too easy to bump -- though I've done thousands of frames of copy work using just a tripod. I always sand bagged the legs or taped them down. Do that first. For a lens, just about anything will do, especially because LightRoom can correct for zoom lens distortion. If you can use a flat macro lens like the one you inherited, or a Nikon 55 or 60 Micro or the 105 Micro. (I have both the old 55 and the newer 60. Except for the 60 being autofocus, they're every similar. On a budget? Buy an old one. Most other older film lenses are terrible. All old zooms are horrible. I shot for years with lenses that I thought I could still use when I got a D2X in 2001. Digital lenses are always much better. ) The holder looks great. I've exhibited and sold photos printed from negatives held in mat board DIY film holders. The critical factor is the image area of the film doesn't touch anything and the holder holds the film flat. Sometimes this is difficult. You don't need a level. Instead just lay a mirror, or the reflective surface of your light panel. When you see the front element of your lens centered in the frame in your camera- you're aligned. When I shot works of art behind glass I just held a small flashlight above the lens and then to the side and moved the camera until they were aligned. There were elaborate and costly widgets to do this but this is all you need. When you're aligned, tape everything down. After securing the tripod. (I guess you could use a level on the tripod tube.* shift the camera. The table top is constant. Tape everything down. At about 10 minutes Teo is putting in a new strip and his holder is sliding around. No. You add a lot extra labor and it will undermine your quality. This is not art, this is mechanical. You are making a machine think of it as a machine. Technical. Generally f 8 is the sharpest setting for most lenses. You get into refraction lower sharpness at higher f stops. To manually focus (I spent 40 years doing this with 4xt5 and 8x10 cameras, knew people who knew Adams, Weston and Cunningham.) You want to rack in and out getting closer and closer to the sharpest focus. With very little practice you'll get great at this. I don't know about the 2 second exposures. Ideally you want the camera to not move, meaning, mirror locked up, electrical release, not your finger. I'm also not sure about the light source. What's its CRI? And is it a continuous spectrum? This is really important with color transparencies and negatives. Do not shoot Jpegs, shoot RAW. My Nikon D850 has a phenomenal range. With transparency film (slides) anything 5 stops +/- is solid black or empty white. I think my Nikon has a range of 14 stops. (I can underexpose 5 stops and in Lightroom bring it right back to normal exposure -- with a little noise. Most film photography images had a range of 7 stops black to white). This greater range is really the reason why 'scanning' with a DSLR now 'works.' Also shoot with the emulsion up facing the camera. Now you're shooting the emulsion with the image, not looking through the clear base. Your image will be backwards (mirrored) so you'll have to flip it. Now the bad news. You'll have to get software to convert a color negative to a positive. (The second more costly one here looks great.) That reddish cast isn't the negative of the real world, it's a mask. Just fiddling I've never been able to correct it out. Second bit of bad news: all your grandparents' negatives from the 1960s and 70s? They're effectively screwed. Fugitive dyes in the film have faded, permanently shifting the color. There are probably some software options to fix some of this. The problem is you can't tweak a color that simply is no longer there. (BTW Kodachrome compared to Ektachrome and other slide films from back in the day? About 5-10CC Red. Plus more saturation, deep blacks. I once worked with a guy who had to shoot Ektachrome when he wanted Kodachrome and this is what we came up with.) The way you'd really do this DSLR scanning as a Work Flow. Start with a couple of images, drive yourself nuts. (Dust is also a huge problem. Cleaning solutions attract dust, but may be necessary to remove embedded dust. Distilled water is best. A little Photoflow (I still have a bottle! use it in my fountain pens) helps. If you keep at it you make progress, eventually you'll be as efficient as is possible. (Audiobooks is how I put in 60 hour weeks in a darkroom to make 20 prints.) Hope this helps.

Have you dealt with removing remjet from film that has it?

Would it be more cheaper if I use a cropped censor like A6100?

when scanning film like this at home, does the room need to be dark to avoid light hitting the negative when its removed from the canister

Hey, I used Fujifilm superia extra 400 C41 process cn-16.I don't seey images on the negative. Did I got the wrong film type?

Thanks. I thought they are developed first as hard copies and then scanned. Or may that's another way? Another question is, if this is the way to turn them to digital then the kind of film doesn't matter because the colors are adjusted anyway? Hope somebody can answer. Thanks

what brand is your tripod? i love that it has the ability to flip.

What tripod are you using? I will be buying my first tripod and I want to make sure that it can hang the camera in up-side-down mode.

Would this work with Super 8 film, with a suitable macro lens? Looks extremely time-consuming, though.

A small travel zoom camera (eg nikon coolpix s9600) has a macro setting which works well..a much cheaper option..you can buy a used camera for under £50. A iPad set on white b,and screen works as a light source..BUT place your slide film at least 30 cm away from the iPad to avoid the discrete dots…by far the cheapest and fastest way of digitising slides…

Few min. in - had to stop, going into a trance because of your amazing voice, lol!

Hey, awesome video, I love Urth adapters as well (all tho they are super heavy). I did want to point one thing out tho, you use f16 to have more sharpness, it this due to that specific macro lens and the adapter? I thought f5.6 or f8 were usually the sharpest settings on a full frame camera. Thanks anyone for clearing this up for me!

@teocrawford

Жыл бұрын

Thanks for the kind comment Sebastian! :)) Ahh great, I actually really like that they are heavy haha :D I use f.16 not for maximum sharpness but for an increased depth of field so that in case something moves slightly, which easily happens with my setup, my focus is not instantly ruined. I guess that is a habit from my previous setups, when I was just trying all sorts of things to get my scans look good. I hadn't thought of maybe reconsidering this habit and checking what the optimal aperture for this specific lens is :)

Hello, friend. Where can I find your tripod?

Is it really essential to have a macro lense? Ive got a 1:3 ratio 14-42mm lumix lense on my digital. Thanks Great video :)

@teocrawford

4 ай бұрын

Not absolutely essential but highly recommended👍🏼

hell yes!

@teocrawford

Жыл бұрын

Heee yeah yeah!🧛‍♂️

You Could use extension tubes with a non macro prime lens.

@teocrawford

Ай бұрын

As I think I mentioned in the video... that didn't work very well, because the tubes created a lot of chromatic aberration. But maybe my tubes were just too cheap, I don't know.

@davidhardaker192

Ай бұрын

Hi, thanks for the reply. I think the issue is probably caused by the path the light goes through the lens when forced to focus at distances it was not designed. I read that if the lens can be 'reversed ' then the light path is more in keeping with how the lens was designed.

Much simpler. This is the designed setup. Take a Nikon camera, a 60 mm MICRO lens and the ES-1 adapter. It is about 5 sec per image. AF once, F9 or F11. Click. No alignment, no time wasted. Use a RAW converter that does the conversion automatically. Capture One does it.

Does the age of digital camera matter? I have a Nikon D3000 (made 2012). Planning to upgrade eventually but that’s what I have now

hey, thanks a bunch for this video! What camera tripod do you use?

@teocrawford

Жыл бұрын

Sure! :) I'm not certain on the exact model but it's a Manfrotto BeFree :)

@d3adalr3ady

Жыл бұрын

@@teocrawford thanks so much!

Can u link the tripod and the light table ?

Hey! For the film, do you just open the roll in light and it's safe?

@teocrawford

4 ай бұрын

Oh nonono please don't do that haha!! Film is light sensitive so after you shot the film you have to rewind it back into it's canister (method depends on camera - most point and shoots do it automatically, whereas SLRs have a lever for you to turn). But then once the film is back in the canister you take out it out of the camera and get it developed at a lab. The lab will send your roll of film through a chemical process that makes the images visible and desensitises your film so that you can look at it in broad daylight. Once they're done you can pick your film up and simply go through the process that I demonstrated in this video :)

I"ve been using a digital camera , tripod and a light box to copy negs & trans of all sizes for 20 years !

This may be a silly question but if you're taking a digital photo of a film negative does it then become a digital photo? Am I losing something that I would get if i were to take my film to be processed at the camera shop? I'm trying to understand and just getting into this at an old age. Appreciate in advance any replies. Thanks. I really enjoyed the video.

Question, since you used a vintage lens did you have to adjust your settings to APA-C?

@teocrawford

Жыл бұрын

No, the lens is a full frame lens so that wasn't necessary🤗

In Photoshop - Image (menu), adjustments (menu item), Invert or simply command-I makes a negative positive or a positive negative. Easy! FYI