I have searched for a year how to make stickers on my Cricut and this is the best video I’ve found. I just need to actually learn to design them 😣 lol

@susitorres6413

2 жыл бұрын

Cricut also has stickers in design space you can print and have your cricut machine cut after !!

@tinaanderson200

2 жыл бұрын

How are they made Mayne an Ipad

I bought cricut a year ago and have watched all the sticker videos on here I could find. This is hands down the BEST tutorial I've seen. I can't believe you packed so much concise information in under 6 mins! Please make more vids and I love your stickers!!

@mooneyesart

3 жыл бұрын

Thank you so much! I'm so glad you like the video :) I'm happy that so many people are finding it helpful!

About to get my cricut explore and a tutorial like this is exactly what I was looking for. Thank you so much!

I just love it when I come across amazing Canadian channels. These stickers are gorgeous. Thanks for sharing.

@mooneyesart

2 жыл бұрын

Thank you for your kind comment! I really appreciate it ❤️

This was so helpful, thank you so much! I hate the way cricut design space handles printing so this is such a helpful tip

that cricut hack......genius! im gonna try that tomorrow actually

Absolutely the best cricut sticker video ever!

I think this method just mildly blew my mind. No 6.25x9.75 box?! Awesome!

This is a great tutorial! Couple things that might help…. If your cricut mat has lost its tack, you can wash them with Dawn dish soap, and a sponge. You can also use a repositionable glue to retack after washing if desired, or if you want it stickier. As for not cutting all the way through, DO NOT UNLOAD after the cut! Instead, immediately press the go button again and it will cut the same pattern in the same place, and voila! You can do this multiple times if you need to!

@mooneyesart

3 жыл бұрын

Thank you for the tips! I have since changed the cut settings to 2x cut and all the stickers come off very easily 😊

Great tutorial. Very helpful 👍👍 Your instructions are so clear, great work.

Thank you so much for the straightforward explanation! Your stickers are adorable haha

@mooneyesart

3 жыл бұрын

You are so welcome!! Glad to help 😊

THANK YOU FOR BEING SO STRAIGHT FORWARD!!!

Awesome tutorial! Thank you for not having a long intro and getting straight to the point. Some humble advice; you can set your cricut machine to the “cardstock+” button and it should cut straight through the entire sticker! I’ve used that method for cutting through stickers that I self laminate with clear gloss paper.

@mooneyesart

3 жыл бұрын

Hi Jessica, thanks very much! And I will give that method a try! 😊

this is the best tutorial I've seen on Cricut sticker making, THANK YOUUUUUU!!!!!!

@mooneyesart

3 жыл бұрын

You're very welcome!! Glad to help 😊💕

This is so cool! And amazing coz we both have the exact same equipments! Thank you.

Thank you for this! It's so helpful. I've been wanting to make car stickers so I'll be trying this soon. Thanks again

@mooneyesart

3 жыл бұрын

You're welcome! I'm happy to have helped! 😊

great work! Love my laminator, I use it for everything. much love.

@mooneyesart

3 жыл бұрын

Thanks very much! And I totally agree, love my laminator. It's awesome for making bookmarks 💕😊

Im your 100th subscriber!!! Yayyyyy thank you for making this helpful video!!!❤️❤️❤️

@mooneyesart

3 жыл бұрын

Thank you for being my 100th sub!! You are awesome ❤️❤️

I love how you made the stickers out of DS and so you got more out of the material! Well done!

@mooneyesart

3 жыл бұрын

Thank you Mariella! Glad you like the vid 😊

@noeliac.vegaayala1474

2 жыл бұрын

Omg! I love this method as well I hate how the print and cut setting wasted so much material

@Ashymow531

2 жыл бұрын

Great idea to work outside design space! When aligning the printed sticker sheet on the cutting mat are you just aligning to the top left or about 1/4 inch down and over to account for design space's alignment? I thought that might have been what you were doing with the blue masking tape. Thanks!!!

Thanks! I have lots of designs and needed the info to make stickers!

@mooneyesart

3 жыл бұрын

You're welcome! 😊

Thank you so much ! I was struggling to know how to make my stickers waterproof ! Thank you so much !!!

@mooneyesart

2 жыл бұрын

You're very welcome! Glad this helped :)

I've attempted to make stickers before and always failed~ lol I tried your technique and I'm now finally able to create stickers I can use with my orders as little gifts. ABSOLUTELY the easiest tutorial I've ever seen~ Thank you so much for sharing~

@mooneyesart

3 жыл бұрын

I'm so glad this method worked for you! Happy to help 😊❤️

I would LOVE to see a bumper sticker video!! Thank you!

Here's an option that works: peel back and adhere about a 1/4" of the clear sticker along the whole 8.5" edge of the color printout. Now, peel off the rest of the backing away, holding it apart from the color sheet. Feed that small adhered edge into the cold laminator, holding the sticker and printout apart, and let it naturally feed together into the laminator. What comes out is a perfectly applied clear sticker, with no air bubbles. This saves applying/rubbing by hand and rolling by hand, and the end result looks better. This is our method at my print shop.

@mooneyesart

3 жыл бұрын

That's a great idea! I was wondering about a method like this but didn't want to risk ruining my sticker sheet. I will definitely try this next time!

@hotchilly1000

3 жыл бұрын

Was going to suggest this too.

@Wherehopebloomsbrighter

2 жыл бұрын

Great tip!

@tinaanderson200

2 жыл бұрын

@@mooneyesart can it be on video

@meghanwedemeyer1243

2 жыл бұрын

Can you post a video of this? I don’t fully follow how to do this. I make stickers and the laminate issues are getting costly as I keep messing up.

Thanks. You saved me tons of research on UV ink and other rabbit holes when my ink started to run on my stickers

Got a chuckle out of this. Cool cool

Brilliant clear tutorial. Thank you.

@mooneyesart

3 жыл бұрын

Glad you liked it! You are welcome 😊

this was the best and most straightforward tutorial for making stickers on the Cricut that i've seen, thanks!

Thanks for the info. Just got a Maker 3 and Pixma 100 and am wanting to make stickers.

This is just the best tutorial out there for stickers

@mooneyesart

3 жыл бұрын

Thank you so much! I'm happy that so many people enjoy this tutorial 😊❤️

@EcinajCraftandStuff

3 жыл бұрын

@@LuisCasstle hey hey you ahve to show me 😄

Absolutely awesome job thanks!

@mooneyesart

3 жыл бұрын

Glad you liked the video! 😊

finally, a good video! thank you for this info I'm starting my sticker shop soon:)

@mooneyesart

2 жыл бұрын

You're very welcome! Glad to have helped!

This is a very important and useful information, educational video!

@mooneyesart

3 жыл бұрын

Thank you for the kind comments! ❤️

thank you so much for the tutorial! please make the bummer sticker video too

Life saving! Thank you so much

@mooneyesart

3 жыл бұрын

You are so welcome! Glad to help :)

amazing!!!! thank you soo much for sharing!

HI! i do the same as you. but to save you time on having to hand cut small spots, when you are in the material settings change it to where you have it cut 2x's...it should be the first drop down option within the settings.

@mooneyesart

3 жыл бұрын

That's a great tip! 😊😊

wow thanks so much for this info

@mooneyesart

3 жыл бұрын

You are welcome! 😊

this is a wonderful video.. thank you so much

@mooneyesart

3 жыл бұрын

Glad you liked it! 😊

Great tips. Love ur video

Best tutorial I’ve seen!!! Wanted to give you a tip for your cricut blade. Take your blade out of your machine and scrape it over a piece of aluminum foil. It will sharpen it like new. Just subscribed 😉.

@mooneyesart

3 жыл бұрын

Thank you Anna - I have tried this method before and it does indeed work! The issue is that these stickers are so thick that a few passes with the machine are needed. 😊

Love this Video Thank you so much

@mooneyesart

3 жыл бұрын

You are so very welcome! 😊

Yes thank you

Love them ❤️

@mooneyesart

2 жыл бұрын

Thank you! 🥰

You are amazing! Tha k you for this

@mooneyesart

3 жыл бұрын

You are welcome! 😊

WOW you made me smile with this Hack Thank YOU!!!!! My Cricut air has a glitch not reading the black outline and this bypasses it!!! Whoop Whoop no MORE waste!!!

@mooneyesart

3 жыл бұрын

So glad I could help! I really hated how much ink the cricut wastes with that black line.

@LizzieWestBathandBody

3 жыл бұрын

@@mooneyesart and now I don't have to worry about doing a sharpie around that black line when I discovered that hack I began to love my cricut again that is the biggest frustration and people don't realize that it is a glitch that the print and cut that black line the sensors don't always read it and with this hack you don't need it

@guavaberry

3 жыл бұрын

This. is what happened to me last night, I think thats why I was led to this video haha. I am about to try this out and hopefully no more "can't read the sensor marks" I much prefer working with photoshop anyway. I am glad it worked for you and you had the same issue as me lol

@a.cornelia

2 жыл бұрын

I had this problem too with my Maker! Just open a ticket or call to talk to a representative and they can help. My machine was replaced with absolutely no fuss! I use this hack as well but I need the machine to read registration marks for calibration 😄

what do the white squares do? also thanks for such a straightforward and quick tutorial! been trying to figure out how to use the cricut without wasting so much paper

@hotchilly1000

3 жыл бұрын

They create the Whole cut image to be the size of your sticker paper so that when you line it up on your mat to 0 it matches the placement. If you didn't have those place holders the images would scoot up the page too much and your would not get it aligned correctly.

Thank you for this

@mooneyesart

3 жыл бұрын

You are very welcome!

Nice tutorial

@mooneyesart

3 жыл бұрын

Thank you, Barbie!

I literally watched the whole thing and have not material 😩😂 not even the actual cricut. Lol you are that good!

@mooneyesart

3 жыл бұрын

Haha thank you very much!! I'm glad you enjoyed the video 😊😊

Very nice

I love your kitties 🥺🥺

@mooneyesart

3 жыл бұрын

Thank you! They are wonderful helpers 😂❤️❤️

this video is old. now with your experience, do you think is it the best solution for make stickers? sorry for my bad english i'm french

I would love to see a bumper sticker video (the sticker in the video is beautiful!). I use the same clear laminate with waterproof matte paper but water got in after a couple of rains and the ink ran. Do you think the cold laminate can help with that?

@mooneyesart

3 жыл бұрын

Hi Kuulei! I will definitely be making a bumper sticker video soon! For the laminate concern, I think that it may be the matte paper which is the issue (only vinyl paper will work since the paper backing on matte paper will allow water to seep through). I do recommend trying with vinyl first before buying a cold press laminate :) hope this helps!

Cutest stickers ever

@mooneyesart

3 жыл бұрын

Thank you very much Waverly! ❤️

hi good morning thanks for youre video. so that minds there is no sticker r paper with out the laminated paper ?

@mooneyesart

2 жыл бұрын

Hi Dalma, you can use the stickers without the laminate paper, but keep in mind it will scratch easily and not be as waterproof.

Can you go into more detail on how you set your mat up to get such great cuts...my marker is always off

@mooneyesart

Жыл бұрын

Hi Theresa, I know that sometimes when Cricut updates the program my cuts were off sometimes. A re-calibration or two of your cricut machine may help!

Great tutorial, Im curious what do you use the Canon ImageClass LPB622 for? Thanks

@mooneyesart

Жыл бұрын

Oops! I think I added that into my video description by accident. I used it in my other video :) I'll update the description!

Great tutorial! Question, will there be a problem if i pass my stickers with the same laminate you are using throught hot press? I don't have a cold press option. Thank you!

@mooneyesart

3 жыл бұрын

Hi Linda, I think the only problem you may encounter is that your sticker page will curl from the heat. Though I would test it with a scrap piece of vinyl just to be safe (in case any of the adhesive gets ruined). Hope this helps!

I hope you still read! I have used Avery label paper, Cricut sticker paper, and online labels paper all with Avery self laminate and my stickers still bleed! I don’t know what to do, I use photo paper setting on my inkjet, is that too much ink? I hear a lot of people use glossy setting but would that be more ink? I need help haha so frustrating!

My inject printer just cant take glossy paper because it has a small photo paper slot that is meant for small photos so i cent put anything glossy on the regular slot, i use and Brother Inject printer. Do i need to get special ones from inkjet printer?

@mooneyesart

3 жыл бұрын

Hi there! I'm not quite sure I understand your question - do you mean special paper?

Please post link on how to make the car decal u mentioned at the end of this video. Thx!!

@mooneyesart

3 жыл бұрын

I'm working on the video soon :)

Very informative video learn alot even so i have semi gloss sticker paper and glossy paper and i use laser printer with it can i use inkjet eco tank printer with either of the paper as well or it wont work.

@mooneyesart

2 жыл бұрын

Hi Cavin Mel, as long as your sticker paper is 100% waterproof vinyl your laser printer should work just fine! I do highly recommend using a clear laminate on top though, because even with high quality inks, your stickers can get scratched over time if not coated. 😊

@cavinmel2956

2 жыл бұрын

@@mooneyesart okay understand and can I use semi gloss sticker paper and glossy paper on my inkjet printer??

@mooneyesart

2 жыл бұрын

Yes, depending on your printer type and specifications of the paper you should be fine! I would avoid it only if your printer is a lower end model. But if your printer is for things like high quality colour prints, your should be okay!

@cavinmel2956

2 жыл бұрын

@@mooneyesart okay so what about the epson L3150 eco tank? Can that work and what about HP printers?

I love this video! I have a question: you don't use the "print then cut" with the Cricut? because I didn't see any guides on the printed page, if so please share how you do it. I read the text and I saw you use the squares on PS, is that how you do it?, will it work if I do it on Illustrator? . I have my stuff printed at a copy center because I love their quality and my printer is just not as bright as the professional, but this means I can't cut on my Cricut because I don't have "cutting guides" and I have to do everything by hand.

@mooneyesart

2 жыл бұрын

Hi Elaine, thank you! I do have a step by step instruction guide on my blog (the link is in the description of the video) - this should help clarify how the "full page hack" works, along with how to create an alignment box in the Cricut program. Hope this helps!

Love this video! How many microns should be laminating sheets/pouches suitable for stickers? Thank you ! xxx

@mooneyesart

3 жыл бұрын

Hi Jelizaveta - my laminate does not include the microns but I would say just go as thin as you can - and remember that you only need one-sided self adhesive laminate, as laminating pouches will prevent you from peeling off the sticker backing! :)

@sandratheprocraftinator945

3 жыл бұрын

@@mooneyesart im reading some of your responses, you are very helpful 👍

Do you have any tips on properly placing your sheet of paper on the mat? I've done the painter's tape trick but for some reason I can't get consistent cuts on my sheets of paper. I've had like one or two batches that have comes out good, but never consistent enough to start printing on sticker paper (thus far I've been testing on regular paper). Lovely video btw!

@mooneyesart

3 жыл бұрын

Hi Lunacias, I've run into an issue when doing multiple runs of the same sticker page, the only solution I've come to so far is to close out of the design after I've cut out the page, and then open it again. Cricut is really finicky but this seems to work for me. However you may want to try recalibrating your machine if they are off by a lot. Moving the sticker page over a little bit before cutting may help with the alignment. I explain this in my latest video - I leave the painter's tape in the same place, but place the sticker page over a really tiny amount (depending on which way the cuts are misaligned) and restart the cutting process. This usually gives me perfect cuts!

Hello. I hope you can answer my question. Is it alright if I'm going to put a self-adhesive laminating sheet and just use a roller? 'cause I don't have the cold press machine yet. and is it okay if I'm going to use a matte sticker paper? Not sure if my printer can do a good work with the glossy ones

@mooneyesart

2 жыл бұрын

Hi Kimberly, sorry for the late reply! Yes you can def use a roller, I used a roller before I switched to a cold laminate machine. I do recommend the cold laminate machine though as you can apply a part of the adhesive onto one side of the sticker page and then peel off the backing as it's going through the cold press laminate. And yes, matte should be fine but the laminate will make it glossy unless you bought a matte laminate :)

I love this method and bought everything to make my stickers like this however, I encountered a problem 😭 how do you align your sticker page on the mat? I notice you have a border with blue tape to get it aligned the same every time. I put my sticker page to the top left of the mat and everything just cut completely off I would greatly appreciate your help!

@mooneyesart

3 жыл бұрын

Hi Green Grapes! What I do to make the tape border is cut out an 8.5 x 11 inch square in the Cricut app. You'll just need to put a bunch of painters tape on the mat, and then cut out a box from it. Making a box in the cricut design space is easy - you just need to use the rectangle tool, adjust the size to 8.5 x 11, and align the X and Y axis to '0'. Use the Cut (not print then cut!) method to cut out your alignment box. Hope this helps!! Let me know if you have any other questions :)

@meganschwartz310

3 жыл бұрын

@@mooneyesart Genius! i never understand why they add the red border on the mat.

@irenetrail2932

2 жыл бұрын

@@mooneyesart ooh now i understand what the tape it for lol Ty.

Thank you for the video, it was so Helpful! Are there other programs like photoshop where I can arrange my stickers to fit on the whole paper? I can't really afford the adobe suite right now :(

@melissabostic4010

3 жыл бұрын

Adobe has a monthly subscription for like $20 and you can use all their programs.

Hey there, your video popped up when I ran a search on making stickers. Really good ideas and execution you have. Wanted to ask- why did you stop selling on Etsy? Thank you for sharing your video!

@mooneyesart

3 жыл бұрын

Hi Roger, I stopped selling stickers on Etsy because I found their fees not worth it for small items, and I also wanted to take more time for my personal art projects 😊

but whats the four squares for if you've already cut the rectangle out of the tape? whats the point of that? i havent found that answer anywhere.

@mooneyesart

Жыл бұрын

Hi! It's so the cricut can properly register the placement of the page before cutting. The rectangle is so I know where to place my sticker page (otherwise the cuts will be off). Hope this helps!

Can I use a regular lamination machine ? The warm ones

@mooneyesart

3 жыл бұрын

Hi! I haven't tried myself with the hot laminator, I'd say test it out first with a scrap piece of vinyl. My concern is that it would cause the page to bend too much, making it hard to place on your cricut mat. It may also mess up the sticker adhesion - but again I would test these first just to be on the safe side! Hope this helps :)

Hi, Did you add two glossy sheets before putting into the laminator?

@mooneyesart

3 жыл бұрын

Hi Kendy, no I only applied one sheet on top :)

Will keep your rolling method when my blade gets dull!

hi! this tutorial is so helpful! i am having issues making my stickers waterproof! :( im using weatherproof sticker paper + the Avery laminating sheets, after i run then in water a bit of a gray mark appears on the edges of the sticker, could it be that i need to use a laminator? or some kind of different paper? im so frustrated ☹☹

@mooneyesart

2 жыл бұрын

Hi Liz! What printer are you using? I only recommend the pixma pro 100 or 200, or a colour laser printer with the laminate on. I know that other inkjet printers will cause smudging and bleeding of the inks, even with laminate.

can u put this kind of waterproof stickers on tumblers? will the sticker stay even after several wash?

@mooneyesart

Жыл бұрын

Hi Paulene, I have several of my stickers on my waterbottle and they have lasted for around 1 - 2 years without the laminate starting to peel. Hand wash only :)

I heard you mentioned you use them for bumper stickers too... do you spray anything on them to make them uv proof? Or do they not fade??

@mooneyesart

Жыл бұрын

Hi! Nope, I just add the laminate and make sure the vinyl sticker paper is waterproof (not just "water resistant"). It should last even through a car wash. Though if you car is in direct sun all the time, it will probably fade in about 8 - 12 months.

Hi this is the 1st video am watching..am new. But wanted to know why did you peel the protective backing in minute 2.58 just before placing on mat? So did you put the backing back on once you lifted from cricut mat ? That was confusing...would they remain sticky without that backing you remove? Help . Am confuse Thanks

@mooneyesart

2 жыл бұрын

Hi Raquel, at 1:58 I am peeling the backing off of the Single Sided adhesive laminate, not the stickers. This is so I can stick the clear adhesive to the front of the sticker sheet. It gives the stickers extra protection and helps them not get scratched. You don't need this if you buy waterproof vinyl, but you will find the stickers don't last as long without it.

can you bend this sticker after your done? like could I make a tab and fold it in half?

@mooneyesart

3 жыл бұрын

Hi Sadie, I think you should be able to do that 😊

When the sticker sheet passes through the laminator, what do you use on the back of it?

@mooneyesart

3 жыл бұрын

Hi Ana, I don't need to put anything underneath the sticker sheet, it should work just fine without anything! I do go over how to apply laminate sheets using a cold press laminator instead of the roller in my most recent video. 😊

Hey! Thank you so much for such a concise tutorial, exactly the steps I needed! I checked out the PPD sticker paper though and the reviews all say the quality has greatly declined as of late. Do you still use the same paper or have you switched to something else? Thank you so much!

@mooneyesart

2 жыл бұрын

Hi Miz! I'm still using PPD paper, even though the paper itself is a bit thinner, it still holds up really well. I haven't been able to find a better brand of paper that compares to it. The glossiness is really nice as well!

@mizhterr

2 жыл бұрын

@@mooneyesart Thank you for the reply! It’s a shame they declined a bit but if it’s still good then hey! Have a nice day!

Question...Printing is best done in CMYK format, saving to PNG saves it to RGB. How do we make sure colors are accurate if we aren't using CMYK?

@mooneyesart

3 жыл бұрын

Hi Desiree, I haven't had an issue with colours being off at all when printing my png's in CMYK, but every printer is different. The colours on the pixma pro-100 I've found are very accurate

Edit your cut setting to cut 2x to cut entirely through stickers. Also, to save time rolling your laminate sheet, the laminate machine will get rid of bubbles.

@mooneyesart

3 жыл бұрын

Will try these techniques next time! 😊

Hi! I have the same laminating sheets but im planning to buy an laminator, can I just put the laminate sheet and let the laminator do it’s work? Bc When i do it by hand it had tiny bubbles

@mooneyesart

3 жыл бұрын

Hi Aiko! I don't have much experience with using different laminator sheets. The issue you may run into is that bubbles may be created when using just the laminating machine. Also you won't be able to use laminator sheets that come with the machine since they are double-sided, and will seal your sticker backing inside the sheet. Let me know if you have any other questions! :)

hi i love your video! i would like to know what is the name of the laminate paper you are using and where do you buy your sticker paper?

@mooneyesart

3 жыл бұрын

Hi there! I have links in the description for both the laminate sheets and sticker paper under 'Products Used'. I bought both of them off Amazon 😊

@Moonflower6

3 жыл бұрын

@@mooneyesart thank you so much!!!

What brand of photo paper sitcker you use?

@mooneyesart

2 жыл бұрын

Hi Victoria! I actually went back to using the Photo Paper Direct paper, even though they changed it I still have great quality stickers with them. It's the best paper I've found for the price point.

Hi! Any cricut user here can tell me can we use cricut without home printer? By getting our prints from market then use cricut to only cut it?

@mooneyesart

2 жыл бұрын

Hi Moazzma, it depends on the quality of printer you have - for lower end at-home printers, it's better to have your sticker sheets printed at an actual print shop or Staples. But for higher end at-home printers, or laser printers, you can print on waterproof vinyl no problem. Hope this helps! 😊

what are your printer settings? I'm trying this method but my alignment is so off helpppp

@mooneyesart

3 жыл бұрын

Hi there! What kind of printer do you have? I'm using the pixma pro-100, and my settings are just to set it on glossy photo paper, and make sure borderless printing is not on (or it will be off when I try to cut it)

Can I use matte clear and plastic dip clear To waterproof my clear sticker paper

@mooneyesart

Жыл бұрын

I believe you can, although I have not tested the longevity of it, I have seen other people saying that you should be able to :)

Why do you use a cold press to laminate instead of a hot press?

@mooneyesart

Жыл бұрын

Hi Heather, cold press is gentler on the sticker paper, I suppose you can try hot press although it has the potential to ruin the adhesive plus bending the sheet, making it more difficult to place on your mat afterwards.

HI... DOES CRICUT MACHINE ACCEPTS A4 SIZE PAPER?

@mooneyesart

3 жыл бұрын

Hi there! If you use the full page hack in the video, you can use the entirety of the sheet. Otherwise, you will have a border around the page (if you are using Cricut's Print Then Cut method), which measures approx 9.25 x 6.75 inches. 😊

Where do you buy the Avery clear stick paper from?

@mooneyesart

Жыл бұрын

Amazon Canada (they should have it in the US though too!) :)

can gossy LD sticker paper be laminated? it's really bad sticker paper... it crashes off way too easily.

@mooneyesart

3 жыл бұрын

Hi Izlude, I haven't tried that paper yet but I recommend trying to find Vinyl paper if you can. The paper that is branded with "waterproof sticker paper" doesn't work, since it's not vinyl, just paper with a coating.

I have done exactly what you’ve done creating a mask on a mat doing registration marks so you can get a full sheet however when I try to do multiple pages it does not work consistently. The cuts are off I have to take it out measure it and keep putting it in have you run into that same problem? And if so how did you correct it I am not new to cricket but I’ve seen this hack other places on KZread and I have not been able to get it to work when you have to do several pages. I made sure my cricket was an alignment cut and registration marks for the cricket we’re all correct.

@mooneyesart

3 жыл бұрын

Hi Deborah, it could have something to do with the machine's calibration - I recommend doing a calibration test to see if this fixes the problem. If not, perhaps just restarting the program with each new page you cut might help this.

Great video!! Where did you get the roller from?

@mooneyesart

3 жыл бұрын

Hi Kaitlyn! I bought the roller at my local art store :)

Hello! What type of printer ink did you use for your stickers? Ty!

@mooneyesart

3 жыл бұрын

Hi! I'm using Canon Pixma Pro 100 ink 😊

Do you use two different printers? I just want one with a scanner and all, any recommendations? Thank You

@mooneyesart

3 жыл бұрын

Hi Sarah, I use the Canon Pixma Pro-100 for printing my stickers. Unfortunately I do not have recommendations for a printer/scanner combo as those tend to not be as good at producing quality prints. A laser printer would be better if you can get one around 300 - $500 CAD price range. A decent scanner you can buy on Amazon or Walmart for around $50 CAD. Alternatively, you can take your vinyl sticker paper sheets and designs on a USB drive to a Staples, or any printing store. They can print on the vinyl for you with very high quality printers, for around $1 or less per sheet. Hope this helps! 😊

How is it possible that you don’t have the black frame from that cricut draw on the sticker paper and how can you put so much design close to the corner of your sticker paper?

@mooneyesart

3 жыл бұрын

Hi, I mention in the video that I cut out an alignment box that's 8.5 x 11 inches in size. I explain it in my newest video as well. I'm printing it with Photoshop instead of using the print then cut method with the Cricut. This allows me to bypass cricut making a black alignment box.

Can you explain why the need for the painters tape on the mat?

@mooneyesart

2 жыл бұрын

Hi Alexe - the painters tape helps me cut out an alignment box, so I can properly do the full page hack. Since the alignment box won't be on the same edge as regular cricut cuts (to the very far left of the mat), the painter's tape is a guide showing me where to best place my sticker page. Hope this helps! 😊

@lexxb4

2 жыл бұрын

Thank you! I had never seen this done before. Good to know!

Where can I find your video for car decals?

@mooneyesart

Жыл бұрын

Hi Kristy, I haven't made it yet but I'm planning on it :) just been a bit busy the last year!