Great video...AND thanks for listing all the links! Really beneficial.

@inflatableboating745

Жыл бұрын

You're welcome! Thanks for watching and please consider subscribing if you haven't already done so!

Nicely done, Sir.

I like the way you think!!

@inflatableboating745

11 ай бұрын

Thanks! This should be enjoyable, I try to make the whole setup and launch process as easy as possible. Thanks for watching, and if you enjoyed the content, you know what to do!

Awesome idea! I’m stealing that

@inflatableboating745

11 ай бұрын

Thanks, definitely makes launching so much easier! Thanks for watching, and if you enjoyed the content, you know what to do!

Good idea. I got a 16 Saturn with wheels on back like that. That solves the back issue

@inflatableboating745

Жыл бұрын

Yes, this is much better than lugging it up and down the boat ramp. Glad you found the video useful. Thanks for watching, and if you enjoyed the content, you know what to do!

Nice, I have the same boat, different wheels, but I just lay the front end onto a Harbor Freight 4-wheel 18"×12" dolly($13) and you can easily roll it by hand in or out of the ramp, no hitch needed! Just another practical and inexpensive option! Those wheels are nice though, it's an advantage not risking to have deflated tires!

I really need to do something like this. I purchased a 430 Swellfish that weights 260lbs alone. The 20hp weights about 100lb. With all my gear it's about 400 lbs. I installed 12" Brocraft launching wheels. I've been searching for an option to tow out of the water, up the ramp and out of the way of others to pack up. Thanks for sharing.

@inflatableboating745

2 жыл бұрын

Yes, these things do get quite heavy with all of our gear loaded into them. The ramps around me are far too busy to allow me to unload gear to make it lighter. I have to get down the ramp and get out as quick as possible. Thanks again for watching and glad you found this video useful!

@TermlessHGW

9 ай бұрын

I appreciate people who have enough common sense to launch or get the boat out as quickly as possible and not be in the way on a boat launch.

Great video. I opted for a small trailer as I keep my boat inflated for the summer. Wish I would have seen this a year ago as I was setting up beach side. Moving the thing was awful. Hence the trailer.

@inflatableboating745

11 ай бұрын

Yes, these boats can get quite heavy and difficult to move especially with just one person. Thanks for watching, and if you enjoyed the content, you know what to do!

Smart minds think alike! I’m doing exactly the same thing with my sib on a regular 2” tow ball with 8 inch rise position so it gives enough clearance off the ground above inflatable keel, and if the ramp is pretty sloped then my Range Rover can raise suspension to add some extra clearance. But watch out pot holes for the transom wheels, one of my rubber wheels got ripped in half cuz it got stuck in a pot hole. Other than that it works like a mini trailer;)

@inflatableboating745

Жыл бұрын

Awesome, I knew I couldn't have been the only one that thought of doing this! I always take it nice and slow when moving the boat around this way and luckily the parking lots at the ramps I use are pretty well maintained. Thanks for watching and please consider subscribing if you haven't already done so!

Very good

@inflatableboating745

11 ай бұрын

Thank you!

Buena idea , estaba pensando en hacer algo parecido

@inflatableboating745

11 ай бұрын

Thanks for watching, and if you enjoyed the content, you know what to do!

good job brother (y)

@inflatableboating745

2 жыл бұрын

Thank you and thanks for watching!

Be careful. I wouldn't rely on a single D-ring. Eventually, the reinforcement for the D-ring will delaminate.

@inflatableboating745

2 жыл бұрын

Yes, I don't 100% trust that one D-ring which is why I have now run a rope through all three like I mentioned I would eventually do. I forgot to mention it in this video, but I also loosely tie a safety rope from one of the boat handles to the bed of my truck just in case the D-ring was to let loose. Thanks for the comment and for watching! Please consider subscribing if you haven't already done so, thanks!

Where did you get you state license tags? Nice video.

Can you show what hook you used to hook front bow of boat?

That is amazing! I hope to do this to sea eagle's FSK16 when I get one. Any trouble with the cops yet?

Ive got kids and luve douth coast spain. No launch sites so a longish trek avross sand. Any ideas? Would this be drag able over soft sand?

Great video thanks for sharing it. Would like to know where you got your motor dolly. Need one like that ASAP. Thank you

@inflatableboating745

Жыл бұрын

This is the motor dolly: amzn.to/3Q542rL Unfortunately, it appears to be out of stock at this time. Also, my wheels will look a little different since I upgraded them on my dolly. Thanks for watching, and if you enjoyed the content, you know what to do!

I have the Beachmaster wheels on my 13' Kaboat. Where did you get the solid wheels from?

I love your setup but i think a small trailer will make it easier i have an inflatable one on a trailer i got to the point now i lunch and retrieve without touching the water

@inflatableboating745

11 ай бұрын

I'd love to leave the boat on a trailer, unfortunately, I have no where to store a trailer, which is why I bought an inflatable boat. Thanks for watching, and if you enjoyed the content, you know what to do!

Thank you sir. And my back thanks you as well.

Hi sir quick question can I trail the boat for short distances? For example I got camping and I would like to take my boat from the camp site to the launching ramp … Short distances like 200-500M max and low speed of course … I have Transom wheels but the ones with tubes not solid plastic

Thanks for the video. What model is your Bris inflatable?

@inflatableboating745

2 жыл бұрын

I have the 10.8' Bris with Aluminum flooring and heat welded seams. I've had it for 2 years now and am very happy with it. Thanks for watching and please consider subscribing if you enjoy my videos!

Interesting motor rack to transport the outboard. Did you make it yourself?

@inflatableboating745

2 жыл бұрын

This is the Aquos Easy Mate motor stand. I've added different wheels to it to suit my needs, but otherwise it's the same as when I purchased it. I plan to do a review on it in the future. I do have an assembly video of it on my channel. It's working out great for me and I don't have to lift the motor anymore. Thanks for watching and please consider subscribing if you haven't already done so!

Hey there! Love the set up. I just bought the exact same boat for me and my son. Can you please let me know what type of under seat storage that is? Thanks!!

@ElMariner-mx3iw

Жыл бұрын

Also your yellow inflatable motor? Seems to be a good one?

@inflatableboating745

11 ай бұрын

These are made by Aleko and I got them off of Amazon: amzn.to/3QCbmLM Thanks for watching, and if you enjoyed the content, you know what to do!

@inflatableboating745

11 ай бұрын

The yellow inflator is made by Saturn and I got it off Amazon also: amzn.to/446Udg3 I usually use a small leaf blower to inflate the boat quickly, then finish topping the boat off with the yellow inflator. Thanks for watching, and if you enjoyed the content, you know what to do!

You have everything list that's on your boat apart from the one thing that video is all about! Where did you get the bit you attached to your tow hitch so you can launch the boat?

@inflatableboating745

Жыл бұрын

Here is a link to the hook I used: amzn.to/3xZSEDl The reason I don't list this setup is because different vehicles will require different adapters to get the desired height and length. Example: a car will probably require more height and less length, or a lifted truck may require a drop down adapter instead of one that lifts the hitch up, etc.

@slamdunk58

Жыл бұрын

@@inflatableboating745 Thanks for that. Now, what about the bar that connects the hook to the tow hitch? Thanks.

@inflatableboating745

Жыл бұрын

@@slamdunk58 Here is the extension piece that connects to the hook: amzn.to/3Rq0rkL

@Bing724

Жыл бұрын

Can someone share the link where to buy the piece that levels up the hitch extension ?

Really nice music. Who and which track is this?

@inflatableboating745

Жыл бұрын

I'm sorry, I don't recall the name of the track. Thanks for watching, and if you enjoyed the content, you know what to do!

what is the motor trolly? where can I get one?

@inflatableboating745

11 ай бұрын

This is the AQUOS EASYMATE. Here is a link to it on Amazon: amzn.to/3s1Ktq2 It seems to be currently out of stock. Thanks for watching, and if you enjoyed the content, you know what to do!

👍🏼

@inflatableboating745

11 ай бұрын

Glad you liked the video!

So how long does it take to launch your boat like this?

@inflatableboating745

2 жыл бұрын

Just a couple minutes. This isn't really a time saver, it's more about not having to huff it up and down the boat ramp risking busting my butt on a steep, slick boat ramp. Thanks for watching and please consider subscribing if you enjoy the content!

cool no trailer take space my back yard no pay trailer tax permit

Those beach wheels stay on in the water?

@inflatableboating745

10 ай бұрын

Yes, they flip up out of the way once you're in the water and can be quickly and completely removed when you need to roll your boat up.

What motor stand is that?

@inflatableboating745

5 ай бұрын

AQUOS EASYMATE

Which pump do you use?

@inflatableboating745

11 ай бұрын

sorry for the late response. Here is the pump I use: amzn.to/445Zd4O

What are you using to maneuver the motor?

@inflatableboating745

10 ай бұрын

This is the AQUOS EASYMATE Folding Marine Outboard Motor Stand. Got it off Amazon, but it hasn't been available for a while now.

@rydinghood2

10 ай бұрын

Thank you for the feedback!!@@inflatableboating745

Why dont slip by hand. Do you realy need the truck for 50m or is it so hard to handle. The wight should be about 100kg? But indeed the idea is good.

@inflatableboating745

2 жыл бұрын

Many of the boat ramps I use are steep and very slick. Twice I was unable to get enough traction to pull the boat out by hand and required the assistance of another person. Not to mention, it was pretty sketchy going down some of them. Due to this, I decided using my 4x4 truck was a better option for me. If I could launch on a nice flat beach then yeah I'd launch it by hand every time. Thanks for watching and please consider subscribing if you haven't already done so!

@Chuck_D

2 жыл бұрын

Definitely not an easy task to do alone, even with 2 people it can be tiring when you have the boat fully loaded!

@inflatableboating745

2 жыл бұрын

@@Chuck_D Yes and the Texas heat here makes it even worse! I want everything about this boat to be as quick and easy as possible and this is just another way I'm doing that. Thanks for watching and please consider subscribing if you haven't already done so!

@chatteyj

Жыл бұрын

@@inflatableboating745 Hi I'm thinking of getting an inflatable boat and I want the set up to be as quick and easy as possible as well as in my neck of the woods (UK) theres so many people about in summer I just want in and out as quick as possible so I'm thinking of transporting my boat to the water and back inflated on the roof rack of my truck or van, although what you have done here looks quick enough. I see you use the leaf blower trick for quick inflation, nice.

@tomulator

3 ай бұрын

Wonder if a small rope winch in the back of your pickup bed would work better for lowering / raising your boat down/up steep ramps. 🤔

Like the rig, but you must admit this is pretty lazy ;)

@inflatableboating745

2 жыл бұрын

I dunno, my boats a little over 300lbs when I have it loaded up with all my gear. Pulling it up a steep, slick boat ramp in 100+ degree heat is no fun. I call it smart :)

@kibbsbrotherhood9102

2 жыл бұрын

Exactly a moron would call it lazy

@dennisdunbar2340

2 жыл бұрын

@@inflatableboating745 I agree it's not easy by yourself. I was hoping to try transporting slightly deflated with the floor already installed in the bed of my truck using a bed extender. Then simply inflate at the ramp and use your towing idea to launch and pull my boat out of the water allowing others access to the ramp. Can't really use a trailer as I don't have a place to store it. thanks again for sharing.

@inflatableboating745

2 жыл бұрын

@@dennisdunbar2340 I have considered the partially deflated method but haven't tried it yet. Seems it would make the boat a little awkward to handle and I'd lose all my bed space for all my other gear. Let me know if you try it one day and how it works out. I am in the same boat (no pun intended) where I do not have room for a trailer, But, I did pick up a trailer (not for highway use) that can be used to launch your inflatable from once you are down at the ramp. It breaks down into a few pieces and makes it ultra compact. I plan to do a video on it here soon. Please consider subscribing if you haven't already done so and that way you can be notified when I post more videos. Thanks again for watching!