Launching wheels for inflatable boat with transom - assembly instruction
Amazon DE: www.amazon.de/gp/product/B08L...
Amazon IT: www.amazon.it/gp/product/B08L...
Amazon FR: www.amazon.fr/gp/product/B08L...
Amazon ES: www.amazon.es/gp/product/B08L...
Launch wheels from www.launchingwheels.com/produ...
Assembly instruction for stainless steel foldable launching wheels. Launch wheels are used for inflatable boats with transom and make boats easily transportable by a single person.
Simple installation instructions show how easy it is to set up your boat for more convenient transportation.
Laivas riteņi no www.launchingwheels.com/produ...
Nerūsējošā tērauda konstrukcijas atlokāmo laivas riteņu montāžas instrukcija. Laivu riteņi tiek izmantoti piepūšamām laivām ar tranci un padara laivu viegli pārvadājamu vienam cilvēkam.
Uzstādīšanas instrukcija parāda, cik viegli ir uzstādīt laivas riteņus pašam ērtākai laivas pārvadāšanai.
Пікірлер: 29
I have just taken delivery of a set of these dinghy wheels and they look and feel great, my set may be a later version because they have a extra set of holes in the transom bracket and two extra stainless steel pins to stop the wheels from bouncing out of possession while launching or motoring along. It was watching this video that persuaded me to buy a set and the video is very useful to show how to fit them. Very pleased with them.
After watching your video I took a drill and file and created a 4.5cm slot on each of my wheel posts. Now one pin is enough, acting as a hinge and traveling along the slot locking the system in place with either the weight of the boat or the weight of the wheel.
good joob
Excellent video 👍
@launchingwheels5086
4 жыл бұрын
Thank you for feedback, please check out more videos in our channel. Visit our website: www.launchingwheels.com/our-products
Колеса надо крикручивать с мотором, сразу смотреть что бы мотор при повороте незадевал за поднятые колеса.
Why not simplify the process by adding a permanent horizontal bolt to the posts, then add gate latches to the top and bottom of the transom? That way, when returning to shore, no more pushing the wheels down with one hand, while trying to put the pin in place with the other. Instead, just push the wheel down until it clicks into place! As for Locking it in place... Gate Latches always come with a hole that's intended for a padlock. Just Think... No more having to Line Up FOUR Holes so the pin goes through! My Dad always told me "K.I.S.S." (Keep It Simple Silly!) Try it... and if you Like it, SHOW EVERYBODY!!! You'll get lots of Boaters wondering why They didn't think of that! One more thing... If you're going to leave it at a Dock to go get some Food or Bait, you can put Padlocks on those latches, so you don't return to find your wheels have been "borrowed".
@launchingwheels5086
3 жыл бұрын
Thank you for advice! 👍 We’ll consider your suggestions.
Thanks share your video👍
Tökéletes 👍
hen down theees dont seem to lock in is this correct
Do I have to leave the sealant for two days to cure ? I am using the same brand as you do in the video
@launchingwheels5086
3 жыл бұрын
Tipically we leave it over night and it is ok!
Do you use this small car trailer to transport the inflatable boat? Any tip? I’m think about one for my airdeck 320
@launchingwheels5086
3 жыл бұрын
Hi! We use launching wheels to transport inflatable boat. Please check out our wheels on our store: www.launchingwheels.com/our-products Amazon: UK www.amazon.co.uk/gp/product/B08LDLV3WT?pf_rd_r=QMX2RK9525YJBZF67EKG&pf_rd_p=6e878984-68d5-4fd2-b7b3-7bc79d9c8b60 DE www.amazon.de/-/en/wheels-sliding-inflatable-transport-stainless/dp/B08M33C4NC/?_encoding=UTF8&pd_rd_w=FUbcv&pf_rd_p=07208ea4-5452-4c67-8f65-44901c0f68eb&pf_rd_r=T5XRR8VKT59QHYARFHDX&pd_rd_r=9da20d31-ead0-4efa-b90b-8ab897c0dd9c&pd_rd_wg=9PjOy&ref_=pd_gw_ci_mcx_mr_hp_d eBay: www.ebay.co.uk/itm/Boat-Launching-Wheels-Folding-Inflatable-Dinghy-Outboard-Stainless-Steel-L-Type/174408161216?hash=item289b8957c0:g:9yMAAOSwZxNfPPdU
Do you send to Brazil?
nice bro..
@launchingwheels5086
3 жыл бұрын
Thank you! Please check out our wheels on our store: www.launchingwheels.com/our-products Amazon: UK www.amazon.co.uk/gp/product/B08LDLV3WT?pf_rd_r=QMX2RK9525YJBZF67EKG&pf_rd_p=6e878984-68d5-4fd2-b7b3-7bc79d9c8b60 DE www.amazon.de/-/en/wheels-sliding-inflatable-transport-stainless/dp/B08M33C4NC/?_encoding=UTF8&pd_rd_w=FUbcv&pf_rd_p=07208ea4-5452-4c67-8f65-44901c0f68eb&pf_rd_r=T5XRR8VKT59QHYARFHDX&pd_rd_r=9da20d31-ead0-4efa-b90b-8ab897c0dd9c&pd_rd_wg=9PjOy&ref_=pd_gw_ci_mcx_mr_hp_d eBay: www.ebay.co.uk/itm/Boat-Launching-Wheels-Folding-Inflatable-Dinghy-Outboard-Stainless-Steel-L-Type/174408161216?hash=item289b8957c0:g:9yMAAOSwZxNfPPdU
Hi. At the end arent the wheels loose? Another thing,this set brings bolts to fix into boat? ty adv
@christoschrysostomou8810
Жыл бұрын
I noticed the same
I dont get the last bit:what is holding the wheels down when you pull the boat forward?
@launchingwheels5086
3 жыл бұрын
Hi, thank you for the comment! When you look at the video starting from 0:39, there is a long hole in the leg that locks in the bracket with the pin.
@fishon7159
3 жыл бұрын
@@launchingwheels5086 Oh now I get you,you need the weight of the boat down on wheels to lock them in place.Thanks!
What boat do you have there ?
Какой размер болтов используете?
@launchingwheels5086
3 жыл бұрын
Hi, 8mm!
can you guys deliver to U.S?
@launchingwheels5086
3 жыл бұрын
We are exploring export options from Europe to US
@KiwiReacts
3 жыл бұрын
@@launchingwheels5086 i Saw that you guys are selling it on eBay can i buy there…