How I Get LEGO Star Wars Shock Troopers for SO Cheap!
Ойын-сауық
How I Get LEGO Star Wars Shock Troopers for SO Cheap! I love collecting lego clone troopers and they can get expensive so I have found some work arounds and today I am going to show one of them which I use to get my shock troopers for cheap!
If you would like early access to content as well as exclusive content or be featured in my next Moc checkout my Patreon!: www.patreon.com/user?u=52674170
Want to help support the channel even more? Buy a Tee-shirt: coconut-bricks-studios.creato...
Follow me on Insta: / coconut_bri. .
Пікірлер: 136
Simple answer just buy them with the wrong legs
@DarksaberProductionsOfficial
Жыл бұрын
I know
@coconutbricksstudios
Жыл бұрын
What?
@Ratchetzillastudios
Жыл бұрын
@@coconutbricksstudios The way I got my shock trooper was buying him with the wrong legs
@DarksaberProductionsOfficial
Жыл бұрын
@@coconutbricksstudios I have seen listings with the wrong legs and they are way cheaper.
@coopet4008
Жыл бұрын
Where do you find them?
I’d say the imperfections on the clones make it look battle worn
@coconutbricksstudios
Жыл бұрын
That's what I like to think as well.
@iWhiteout
Жыл бұрын
Yeah one of my clones somehow had the helmet decals slide to the side of the helmet a little bit so now he’s accepted his fate as a battle-worn clone and i nicknamed him “crooked”
This is really a good way. I can’t do this right now, but I definitely will do that if Lego doesn’t make new shock troopers. I personally thought you would buy phase two 212 troopers and you would erase their colors and color them red very carefully.
@bulgarianstormtrooper6952
Жыл бұрын
Why would he buy phase two 212 troopers
@dunsparcetv9036
Жыл бұрын
@@bulgarianstormtrooper6952 because the older once are easier to erase the color and normal phase 2 clones are expensive, because they rarely came in a normal set and their demand is very high. The only problem is the torso, but people have been using the phase 1 torso for them.
@coconutbricksstudios
Жыл бұрын
That wouldn't turn out very good, I tried stuff like that as a kid.
Your process is very similar to mine! I also just had to replace some of my sealing bricks because they were causing legs to crack as well. Decaling is an art that is perfected over time and you are definitely getting good at it!
@coconutbricksstudios
Жыл бұрын
Thanks Micah, eventually I would like to get serious enough to start selling.
Super nice video! I've done a few decaled shock troopers as I love their designs and this is definitely the best way to get them
@coconutbricksstudios
Жыл бұрын
Agreed.
Thank you for that video! I wanted to get into clone decaling for some time, but I was looking for decals that were very similar to Lego style so the clones I've got could go together with the custom ones. It seems like the right one!
@coconutbricksstudios
Жыл бұрын
I am the same way they need to match, I only recently started adding the arm decals to mine.
I have decalled around 100 LEGO clones and it has become a hobby inside a hobby for me. So much fun
@coconutbricksstudios
Жыл бұрын
Lol same, a hobby within a hobby is a great way of putting it.
i was in the stream last night of you building corrasaunt. Keep up the good work!!!!
@coconutbricksstudios
Жыл бұрын
Thanks for joining.
This was so helpful! Going to have to get into decaling myself!
@coconutbricksstudios
Жыл бұрын
Nice, be prepared for a lot of work in the beginning.
thanks for this vid it really helped for my clone decailing 👍😃
Im so happy i just do 360 degree decal and don’t have to worry about using the black hips with white legs and just easily grab all white legs off of LEGO bricks and pieces.
@coconutbricksstudios
Жыл бұрын
360 is too much detail for my liking.
Coconut, please oh please, go get some "Mr Clean magic erasers" they r great for removing prints without damaging anything
@coconutbricksstudios
Жыл бұрын
Fine grit sand paper doesn't damage the torso, in fact it helps smooth out some of the scratches and scuffs that come on used torsos.
Love the vids
@coconutbricksstudios
Жыл бұрын
Love to hear it.
Thank you for sharing 😊
@coconutbricksstudios
Жыл бұрын
Your welcome.
I can't believe you haven't hit 100k
@coconutbricksstudios
Жыл бұрын
Hopefully next year!
Cut all your decals first to make your workflow faster when doing batch builds, but separate them by front back etc in small bowls and cups and by legion.
@coconutbricksstudios
Жыл бұрын
I prefer to cut them as I go.
I just got a tooth pulled but your videos are helping me with the pain
@coconutbricksstudios
Жыл бұрын
Dang hope you feel better soon!
Somehow I have 6 RoS Sith troopers, so I’m just gonna use some parts from them, and some clone parts in order to make a cheap alternative. I haven’t actually bought anything for my small clone army, I just found some old used clone figs in a used bulk bag. Honestly, it’s enough for me.
@coconutbricksstudios
Жыл бұрын
Nice, army building doesn't appeal to everyone.
Bro idk why I love shock troopers so much but they're so expensive! Thank you coconut
@coconutbricksstudios
Жыл бұрын
I know I wish Lego had done more with them.
THANK YOU! I desperately want to develop a 401st army so dearly but the cost is absurdly expensive. I have been on edge on buying decals, mainly because the process is intimidating, but now I feel far more inclined to do it. I greatly appreciate this video. Happy building.
@coconutbricksstudios
Жыл бұрын
Your welcome. I went into decaling with only a little previous experience and picked it up pretty quickly so as long as you have time you can dedicate to it you will catch on!
This video inspired me to get into decaled clones
Love the vids coconut!
@coconutbricksstudios
Жыл бұрын
Thanks man.
I thank you for this info as I am a CAC (clone army customs) guy and it costs a lot and as a younger person with less money any thing cheaper is better
@AshurbanipalTheJesusWorshipper
Жыл бұрын
CAC is amazing but it has a price
Nice! I'm going to buy from them
Even tho this is a star wars video can’t wait to see if there’s something like this for ninjago
@coconutbricksstudios
Жыл бұрын
There might be.
those are sick.
@coconutbricksstudios
Жыл бұрын
Thank you.
Have you tried nail polish remover for getting rid of the print on the spare torsos?
@coconutbricksstudios
Жыл бұрын
Never tried the fine grit sandpaper has always worked for me.
Where can you get those custom-made corn troopers at?
I would love to get those but I’m strictly purist when it comes to figures. But I might make an exception for those cause they look great!
@coconutbricksstudios
Жыл бұрын
Makes sense, I mostly use decals when official Lego isn't an option.
they look so good and i really wanna do it but it definitely isnt an option for me right now. too bad you cant buy them with the decals already installed
@coconutbricksstudios
Жыл бұрын
There are people who do commissions on Instagram.
Nice video
@coconutbricksstudios
Жыл бұрын
Thanks.
The decaled clones look so much better!!!
@coconutbricksstudios
Жыл бұрын
Thanks man, hopefully these next batches look even better.
Is the figs shop offline curently? Or just unavailable for Europe?
Isopropynal takes off factory Lego printing easier than sanding.
I think when the new gunship comes out they will be cheaper coss the old 2013 501st clones used to cost so much and now there they go for like $10 on bricklink
Does filing down the hips make the legs loose?
your clones are very impressive you must be proud
Nice videos
@coconutbricksstudios
Жыл бұрын
Thank you.
*unpopular opinion* New clone print is better
@coconutbricksstudios
Жыл бұрын
Many people like the new style.
Is there any other way to seal without spraying?
Galacticbrickstore has clone shocktrooper for under $4 per trooper quality os pretty good
Also what tools do you recommend using for decaling?
@coconutbricksstudios
Жыл бұрын
I show them in the video.
for anyone wondering thiccy closed his shop a bit ago (i think)
Why do you sound exactly like scott cramer? Anywho, i'm getting my first decals from AVfigs today and this video is very helpful. Man, I hope I don't mess it up.
The 501st and 212th also fought on corasant
@Coconut Bricks Studios where did you get that shirt?
@coconutbricksstudios
Жыл бұрын
It was a gift from my sister.
I’ll be paying like 25 dollars with shipping included with a single custom shock trooper, because I’m in Australia.
@coconutbricksstudios
Жыл бұрын
Yikes.
I’ve never done decals before and tbh im worried imma mess it up
So I found one at an antique toy mall today for $35.99. Everything is labeled lego accept for the inside of the helmet. Does that mean the helmet mold is fake or did lego only recently start labeling the inside of the helmet molds?
When I go on the website it says coming soon what do I do?
I got like 24 shock troopers pack from aliexpress and it was absolutly fine but that are a bit different from yours.
@coconutbricksstudios
Жыл бұрын
I have seen those before, a good option for people who don't mind knock offs.
If you want to gwt rig of the print and not have a chance to damage your fig you shoud use eraser
@coconutbricksstudios
Жыл бұрын
Fine grit sandpaper works fine.
@Dertyast5
Жыл бұрын
@@coconutbricksstudios yeah
all the way
Much cheaper to decal but sometimes they can be a spot were you mess up.Also now you are doing a stream on Friday and it is later and that means I can't join hen you are building coruscant.
@coconutbricksstudios
Жыл бұрын
I do mess up sometimes but that's one of the cons of decals.
How unfortunate phase 1 helmets are sould out. To be honest I do not mind if the minifigure is original or decaled. Decals brings you more options I do similar stuff with armybuilding but in medieval style where there are knights and decals offers unique option to do something LEGO won t do.
I see a airsoft pistol!! So can you do airsoft video?
@coconutbricksstudios
Жыл бұрын
Ya that's my side arm, I don't use it much as I have a scoped rifle so I don't get into many cqb situations.
your set up looks like a droid factories
the helmet is $4 on bricklink aud then you just buy the old shock torsos
Hey man if you did not make this you will make shock trooper spaypiant
can you give me the link to the shop? i cant find it
@DavsRBLX
21 күн бұрын
I think it got taken down
i prefer the realistic clone army custom clones
I saw this before it came out somehow
@coconutbricksstudios
Жыл бұрын
How?
@LPA_BrickFilms
Жыл бұрын
@@coconutbricksstudios I watched this video in your Decal playlist idk how but I was able to watch it when it wasn't listed
Is it just me or can you not find thick figs?
decal
I usually try to get the official Lego clones such as the 2014 212th and 2014 P2 grunt or white. I have 132 2020 501st figures. hoping to buy more of the 2013 style of the 501st since they are only 10 bucks and many sellers have bulk of them on brick link I do have 2 2014 shock troopers. As far as clone army building go's I don't factor in how much it cost to get all my clones, that might scare me if I do so haha.
@coconutbricksstudios
Жыл бұрын
That's a nice collection.
4:23 is that a airsoft gun?
Just buy the og one
@coconutbricksstudios
Жыл бұрын
Ew.
@shift.2d855
Жыл бұрын
@@coconutbricksstudios what do you mean ew they good
Honestly,the custom ones are way better
🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
First comment
the shippinng fee is way too expensive. cant deal with it
@coconutbricksstudios
Жыл бұрын
That's unfortunate.
Ok, um, I can't believe someone hasn't said this but you can't say they're real if you're putting off-market decals on them, lol. They're custom at that point, not real official Lego. If you alter them in any way, they're not real.
You're an Airsofter!?
@coconutbricksstudios
Жыл бұрын
I am, i love it!
@brantozavur2336
Жыл бұрын
@@coconutbricksstudios cool!
Ughhh I said pls don't be decals and the next thing he says is use decals
Am I the first viewer?
Decaled 100%.
FORDO!!!! 0:29
I don't get it... Instead of buying a complete (and high quality) knock off figure for under 1€ a piece, you buy a knock off helmet and basically build one yourself lol. Glad you enjoy it, but I don't get it. Especially with the high quality of knockoffs these days.
Uwu