💯💯💯

@bernarddostie8892

Жыл бұрын

You're an inspiration for many of us! Thanks for giving away your plans so generously it's my biggest project so far and I dreamt of it since you built yours and it occupied my mind since.

@titanicminion

Жыл бұрын

yooo its actually him!!! I'm surprised its not the pinned comment lmao edit*** it is the pinned comment, but I wrote this before it was

I am amazed by your skill and the beauty that you have created. This is an incredibly long and difficult hobby path. And I'm just getting started, yesterday I printed out a small ship for the first time on my printer, measuring 2.5x8cm. I will strive for more, look up to your creativity!

@bernarddostie8892

18 сағат бұрын

@blaucherfuchs1784 Thanks for taking to comment with such kind words. There are always others that can inspire us. I'm happy that you appreciate my work. It may be hard to believe, but this build was my first 3D printing project. Have fun printing and your boats will get bigger and bigger!

Absolutely Fantastic build mate!! Thanks for the video! 👍

@bernarddostie8892

17 күн бұрын

Thanks a lot, I appreciate!

I have built a few Dumas kits over the years, and I think I could build one of those just as fast as the 3d printed one. This is a great build, great scale. Quick tip, to keep from fogging your windows, use canopy glue, CA can fog glass as it cures. Also try to use screws to hold as much of the cabins as possible, you will need to get back into them for updates and repairs.

@bernarddostie8892

9 ай бұрын

Thanks for the advices. I should have tested the glue before using it on the windows and I will definitely buy some canopy glue nexte time (now that I know that this exists! ;-)

Excellent build and the extra details really add to the look of the ship. I printed one shortly after Peter put the design up and ended up with about 5kg of lead as ballast. I run the 2 motors on separate channels which gives options for low power running and differential thrust to turn on the spot.

@bernarddostie8892

Жыл бұрын

Thanks for your comment. I like your idea of running the motors seperately. I might have to try this, I have a free channel left on my radio I think. What konf of motors and ESc did you use?

@robertpowell9559

Жыл бұрын

@@bernarddostie8892 its a bit of a weird setup re-purposing radio and some motors from other projects. In essence i have two small but low kv motors from a quad (cheapest Chinese specials £5), the cheapest 2 way 10 amp speed controllers (eBay £10) i could find. Each speed controller has its own battery, with the receiver and servo powered by only one side. I use the 2 sticks on the radio linked to the separate channels (forward/back for each motor) and one of the sticks is set up to steer. I favour the motor not running on the same battery as the radio so i still have steering, radio and some power when the main battery runs out (Lipos just die and you can’t hear the warning beeper). I also 3D printed some props with quite small blades to bring the thrust to a more scale level.

If your not already, look into the slicer Cura. The tree supports print much faster, use less materials and less movements needed so less stringing. A small room heater in the "enclosure" will help too.

@bernarddostie8892

Жыл бұрын

I should've thought about a room heater... I'll try it for the next build. Stringing wasn't a issue, but the loss of material broke my heart. The other problem was that the supports broke at one point and I had to intervene with hot glue (half way trough the 48 Hours print (front hull)). The Prusa Slicer doesn't offer the tree pattern support that you're talking about, but I will try to use the honeycomb support pattern on my next big print and if it doesn't work I'll try Cura! ;-) Thanks for your comment!

Doing this build whilst swigging Grolsch…doubly impressive…gunna knock something similar together now down the pub !

AWSOME SHIP. I’m into Rc and you have me thinking

@bernarddostie8892

Жыл бұрын

Thanks! This ship is amazing and building it is even more fun. 😁

Sacré beau bateau ça!! Et félicitation pour la vidéo c'est cool de pouvoir suivre tes projets ici! :)

Now you know what to do next time👍and its🔥

@bernarddostie8892

6 ай бұрын

Thanks!

thats awesome, what a good job you did on it all, every single part is flawlessly finished, great details an alot of power so you can even pull a barge around with a load on it :D

@bernarddostie8892

Жыл бұрын

Thanks a lot! I can't wait to pull some things around!

Sweet looking

@bernarddostie8892

Жыл бұрын

Thanks!

Tellement un beau projet et vidéo mon ami! Bravo!

Thats a lot of printtime, slurry and sanding but well worth it. It turned out really nice, awesome build.

@bernarddostie8892

Жыл бұрын

Thanks a lot! Printing took more than 200 hours, but I agree that it's worth it. With my new 0.6 mm nozzle and the organic supports prom Prusa I would have saved 1/4 of the time I think. Thanks again for your kind words!

that is fricking awesome

@bernarddostie8892

Жыл бұрын

Thanks! That was my reaction when I first saw Peters ship! ;-) Now I have my own!

Tu es fabuleux!

Good job man it's beautiful 👍👍

@bernarddostie8892

Жыл бұрын

Thank you very much!

Sensational!

@bernarddostie8892

Жыл бұрын

Thanks David!

Un beau project Bernard !! Je me suis équipé d’une Ender 5 plus imprimante et aussi une cricut maker 3 cette année. C’est relaxant de faire ses propres projets.

@bernarddostie8892

Жыл бұрын

Nice le cousin! C'est tellement plaisant! Tu me partageras un de tes projets à un moment donné.

i love chip!!!

Very nice. 👍

@bernarddostie8892

Жыл бұрын

Thanks! ;-)

The reason it does a wheeley is your propeller is facing directly rear and puts a rotational force on the ship the propeller, well, it shaff would be pointing more towards the center of mass of the ship. You can install an adjustable elevator on the rudder to divert some of the flow to right the ship, it should provide the same effect.

@bernarddostie8892

Жыл бұрын

That's a construtive comment. Thanks. Do you think that this ''rudder-elevator'' could remain in a ''Up position'' even when the boat moves slowly? Or should it be adjustable while driving it?

I've actually been planning to build one with autopilot to send across georgian bay. The build you have done looks amazing.

@bernarddostie8892

Жыл бұрын

Thanks for your kind words! Your project sounds awesome! Be sure to let KZread know about your project! ;-)

@joshuahedges4882

7 ай бұрын

did you manage it

Thank you algorithms, for recommending this as soon as I watched Peter Sripol's initial build today. Your improvements are amazing Bernard. Would you say that someone with no 3d print experience could just go out and buy a printer then do this?

@bernarddostie8892

Жыл бұрын

Thanks for your kind words. It was my first 3D project. I had some help from my brother to get started, but yes, it could be your first project if you buy a reliable printer. Some RC stuff experience wouldn't be bad, but it's not necessary.

@t.h.o.r.

Жыл бұрын

@@bernarddostie8892 awesome- I have lots of model making and RC history. I was just not so sure about 3d print. Peter Sripol is amazing, Ive watched him for years and when I saw this beast I was hooked- My next project!

@bernarddostie8892

Жыл бұрын

@@t.h.o.r. I felt the same when I saw Peter building this boat and when my brother and I bought a printer it came real. Don't hesitate if you have any questions.

@graywatergardening

Жыл бұрын

@@t.h.o.r. I've done a lot of printing for work stuff, for 5 years I just upgraded our printers from ender 3 and ender 6e's to ankermaker m5. Its a lot more expensive vs an ender 6e ($800 vs $400) but if you can afford $800 just go for it. A much better printer, and a heck of a lot faster (up to 5 times as fast).

@boomupengineering

5 ай бұрын

My first 3D printer - Bambu P1S. First print was a Benchy with dozer blade and moving tracks. Second print was the start of a plane fuselage for an Eclipson Model C plane, using Polylite Lightweight PLA. Partway thru the plane prints, I printed the hull for this boat. First print with ASA, this hull, I had a little warpage. I maxed out at 100°C bed temp and started preheating the printer. No issues after that - very nice ASA boat hull sections with minimal supports. Thus with a nice enclosed printer, the printing is the easy part. I look forward to the better 3D printers coming because of Bambu's AMS and overall ease of use. The other manufacturers have to catch up.

Nice work!👍

@bernarddostie8892

Жыл бұрын

Thanks! It was nice chatting with you earlier! Have fun with your projects!

@500Hun

Жыл бұрын

@@bernarddostie8892 Thank you. Yes, there will be a lot of work to do with it !

*Thank you for sharing a good video with a nice boat!~~~^_^*

@bernarddostie8892

Жыл бұрын

Thanks a lot, I appreciate your kind words!

Wow, tu m’impressionnes, Bernard. Vraiment du beau travail de moines.

@bernarddostie8892

18 сағат бұрын

Merci Beaucoup! ;-)

多謝分享！💪👍

@bernarddostie8892

Жыл бұрын

Thanks for your comment and kind words!

Brilliant job, well done. Better than Peters video of his original build.

@bernarddostie8892

Жыл бұрын

Thanks for your kind words! I spent a lot of time researching information on how to do things and what material to use. My intention, with this video, was to make it easier for people who would like to build it to achieve it.

Tisknout z ASA je holé neštěstí.

@bernarddostie8892

3 ай бұрын

Now I have an enclosure that keeps the temperature higher. I hope it will be better. 😅

Awesome build! ive wanted to build this exact same design aswell but i dont have a 3d printer yet.

@bernarddostie8892

Жыл бұрын

Then it's only a question of time! ;-) It was the same for me when Peter's video came out. I waited for a couple of years and now it has become reality! Thanks for your kind words!

@Rundumsfliegen

Жыл бұрын

@@bernarddostie8892 Exactly :-) Also, I have been "Experimenting" with building boats, mostly from wood. First ever "Real boat" (the ones before were mostly hulls from toy boats in which i slapped some electronics) i build was a Cargo ship designed very loosely around the looks of a real Tanker. That Boat was constantly upgraded over time and rising knowledge and is, what i would call a interesting Design now. I just added lights on it today :-) Quite interesting if you take into consideration that my main interest with RC lays with RC flying. But i always liked to experiment and try new things with RC. For example a sorta like swamp boat from old Plane Floats is in the making Currently. Anyway, i can get lost in writing, and especially talking very fast, so I'll end it here. You have yourself a very nice day :-)

I've been wondering for a long time if someone could do something like this with Battle Bay's ships.

@bernarddostie8892

Жыл бұрын

I'm sure that there's a way! A lot of patience is surely required!

I like the name: The Unsinkable II. I wonder what happened to the first one...

@bernarddostie8892

Жыл бұрын

They was no UNSINKABLE I. ;-) It's a joke! :D

👍👍👍

@bernarddostie8892

Жыл бұрын

Thanks!

Parabéns.

@bernarddostie8892

Жыл бұрын

Thanks a lot!

Awesome build. I would like to try this myself one day. Currently I'm working on a 3D Printed Landing Craft. Why did you print with ASA? I've only used PLA and PETG so I don't know anything about ASA.

@bernarddostie8892

Жыл бұрын

Thanks! You should build it, it's a very nice boat having around and building it was pure pleasure. I used ASA because it has the same properties than ABS and is even more resistant to temperatures. I had one bad experience with a PLA printed boat before (it melted in my car when it was 35 Celsius outside). I wanted something resistant this time. I'll look out your channel for your builds if you show some.

Very cool! I also like crafting stuff! I also have a small channel and i would love to share it with you, great work :)

@bernarddostie8892

18 сағат бұрын

Thanks for your comment! I subscribed to your channel!

Hello, nice build 😊 what is the composition of your ASA slurry ? And can it be used in PETG ? Thanks

@bernarddostie8892

11 ай бұрын

The composition is acetone and ASA filament. I use support material to create my ASA slurry.

Hey nice build im late to the party but what bow thrust did you use and how long did they survive been submerged all time

@bernarddostie8892

4 ай бұрын

Hi, the bow thruster motor I used is the BR 1811 Racestar 2000kv 2s. I haven't used it in salt water and treated it twice with an anti rust product in 2 years. It runs like on the first day and I played a lot with it. Probably around 30 hours.

Great! I loved it, thank you for everything. I want to ask you something. I have a large amount of PLA filaments in my stock. If I use them in my production, what would you recommend for the adhesive mixture?

@bernarddostie8892

7 ай бұрын

PLA slurry works fine. I would recommend testing it before. I used ASA because it's easy to sand and to obtain soft surfaces. It's at least easier than PLA, in my experience. Good luck with your build. It's worth it!!

@Top-Jimmy

13 күн бұрын

CA Glue & Baking Soda works very well

Very cool, I am using your build and your videos as a guide for my own project. Thank you for providing so much detail. Did you seal the hull with anything special, or just paint it?

@bernarddostie8892

8 ай бұрын

Thansks for your comment and nice words. Just the paint should do the job. I suggest you use some primer before applying your paint to get a smoother surface and to make sure that every little remaining imperfection in the hull is corrected. Happy building!

@dpenton

8 ай бұрын

Wow, thanks for the reply. I am considering adding something to strengthen the keel but will take your advice on mostly just painting. Will keep you updated :)@@bernarddostie8892

@dpenton

8 ай бұрын

@@bernarddostie8892I am looking for driveshaft components. Where did you source yours?

@bernarddostie8892

8 ай бұрын

​I Used this propeller : www.aliexpress.us/item/1005002018604536.html?spm=a2g0o.placeorder.0.0.5695321ePsvKR9&mp=1&gatewayAdapt=glo2usa This prop shaft (8mm outer diameter and 4mm inner diameter (30cm lenght)) : www.aliexpress.us/item/4000239259177.html?spm=a2g0o.productlist.main.5.24e8229bD6lAGq&algo_pvid=288738ce-1fe9-4c45-87f1-b63b5bc8ff7c&algo_exp_id=288738ce-1fe9-4c45-87f1-b63b5bc8ff7c-2&pdp_npi=4%40dis%21CAD%2113.18%2111.21%21%21%219.49%21%21%402103204217018847361975949e7d4f%2110000000969846360%21sea%21CA%212670469893%21&curPageLogUid=cVDWCIdVLofF ***This could also do the job : www.aliexpress.us/item/1005002662525407.html?spm=a2g0o.productlist.main.21.24e8229bD6lAGq&algo_pvid=288738ce-1fe9-4c45-87f1-b63b5bc8ff7c&algo_exp_id=288738ce-1fe9-4c45-87f1-b63b5bc8ff7c-10&pdp_npi=4%40dis%21CAD%2110.65%2110.65%21%21%217.67%21%21%402103204217018847361975949e7d4f%2112000021606241100%21sea%21CA%212670469893%21&curPageLogUid=WU0wwewK9c0T You'll need some Motor shaft couplers too. These should be easy to find online and will depend on the motor drive shaft dimensions. 😉

wow and where is part 2 still being made???

@bernarddostie8892

Жыл бұрын

I'm still taking footage for the part 2. It will be simple update with all the options I added and the last modifications I did.

Like video

@bernarddostie8892

Жыл бұрын

Big thanks

Sell your Prusa and get a Bambu Lab Carbon. No more cracks. I print ABS without even thinking about it.

@bernarddostie8892

Жыл бұрын

I wish! 😁 I'm still happy with my Prusa. Maybe the next one will be a Bambu.

Hi there, wondering if you have details on the ESCs you used for the Bow Thruster and the Main Motors? Also, can you share the propeller part you used for the bow thruster? Thank you.

@bernarddostie8892

6 ай бұрын

Hi, I used this ESC (20A) for the Bow Thruster and I would use the 50A one for the main motors. I Purchased some expensive ESC for the main motors. They are equipped with reverse, but I would rather have installes Bi-directionnal ESC like this one in the link : tinyurl.com/3u73pbfe For the propeller of the Bow Thruster, I downloaded a '' RC boat propeller'' on thingsiverse. I can't remember wich one it was. I upscaled it until the shaft of the spinner of my motor could fit and then I cut the blades so they could fit in the hole of the Bow. I hope this helps. Have fun builduing and don't hesitate to ask other questions.😉

@dpenton

6 ай бұрын

Thank you very much for the reply. I will keep you updated as my progress goes along!@@bernarddostie8892

Do you have the STL files for the parts? most of the links are not there anymore.

@bernarddostie8892

2 ай бұрын

Write me an email, I'll send them to you. Dostie.bernard@gmail.com

Hi Bernard, I have an idea for a boat, and after watching this video I can’t help but wonder if making my idea into a similar 3D model is something you’d be interested in? If so please respond, and we can go from there!

@bernarddostie8892

18 сағат бұрын

I did not make the 3D drawings for this boat and I only build models that I want to when I want to (sometimes, but still rarely for friends). I already have a project for the year to come and some maintenance work on my other rc models so I don't think that I'll find the time for something else. I learnt designing on KZread and I use a free version of Fusion 360. It takes time but is really rewarding. I encourage you to try!

Ciao, io sto iniziando a stampare questo bellissimo modello ma ho una domanda, è in scala? Per gli accessori in che scala li hai presi?

@bernarddostie8892

Жыл бұрын

I downloaded the accessories from Thingsiverse and adjusted the size to the model, measuring them piece by piece (I didn't use any scale, just feeling). The accessories that were made by Peter Sripol didn't need any adjustments.

team quebec hehe

@bernarddostie8892

Жыл бұрын

Oh! Que oui! Même si la vidéo est en anglais, je voulais spécifier que ça se passait icitte! ;-)

Where did you find some of the extra parts? Like the top mast piece and railings?

@bernarddostie8892

Жыл бұрын

I would have to search for them on thingsiverse. I'll be able to do so in a couple of days. I didn't succeed to print the top mast Part and had to modify the piece by hand. Three railings came out perfect. I'll let you know when I find them.

@bernarddostie8892

Жыл бұрын

I found them on my pc, but not in Thingsiverse. Let me know if you still want them. I could send them to you.

@Igstormchaser

Жыл бұрын

@@bernarddostie8892 yes that’d be great if you could :)

@bernarddostie8892

Жыл бұрын

@@Igstormchaser Write to me : dostie.bernard@gmail.com

Hi Bernard, did you draw it yuorself or Are the files aweleble somevare online? Best regards from Denmark

@bernarddostie8892

10 ай бұрын

Take a look in the description of the video. You'll find the different stl files I used

Oh no! the railing already broke when you showed us the pump!

@bernarddostie8892

Жыл бұрын

Yes, it's really fragile. I want to build a metal one to replace the plastic one.

@titanicminion

Жыл бұрын

@@bernarddostie8892 Nice👍 Btw, How did you position the ballast so it wouldn't get in the way of the electronics and what did you use to hold them down?

@bernarddostie8892

Жыл бұрын

I'll show you how I did it in the next video. If you want to see it before, I could send you pictures.

How did you get the licensing for the songs?

@bernarddostie8892

Жыл бұрын

I searched for ''licence free music for KZread'' on Google.

@ThatRCGuy1

Жыл бұрын

@@bernarddostie8892 sweet because I keep getting copyrighted also how do you add the little section to say what songs are in the video or does it do it for you

@bernarddostie8892

Жыл бұрын

@@ThatRCGuy1 It did it for me!

I built my own Peter Stripol Utility Ship too and realized the design isn't GREAT when you include the entire super structure in terms of balast vs freeboard and overall performance in the water. My version has a hugely reduced super structure in favor of all the electronics and camera gear I carry. I did print and paint a full super structure when I want to just cruise but it just makes the boat run poorly IMO. My ballast is just four lbs and overall weight I think I'm up near 14 lbs.

@bernarddostie8892

Жыл бұрын

I did noticed that the boat was a bit low in the water and that it wasn't as fast as I predicted (moves a loooot of water), but I still think that it's an awesome design even if the performance isn't perfect the look is nice. This kind of ship ain't designed to be fast either ways. With the adjusted ballast my boat is very stable even in rough waters. I watched your videos and you also talked about 6 lbs of ballast. That's about the weight I put in mine I think. Your FPV set is awesome. I especially like the underwater camera! Good job!

About what scale is that model? 1/48? 1/35?

@bernarddostie8892

Жыл бұрын

I don't rellay know... It's about 80cm long. I would say its close to 1/35.

And what about towing a boat? If you have a lot of power but not a high speed, seems you'll get a lot of thrust at a low speed. I suggest to tow something about 500+ kilograms displacement.

@bernarddostie8892

Жыл бұрын

It has definetely a lot of thrust, but those motors aren't designed to tow anything heavy (they are made to turn fast). I successfully towed someone in a kayak, but I'm afraid that it may fry a motor someday... But I have to try again.

@GeneralBlackbird

Жыл бұрын

@@bernarddostie8892 It all depends on propellers. The motors can run fast. If the propellers are not high-speed, then the ship will not accelerate. But the propellers thrust will grow. You will get a lot of static thrust, with a zero speed. You can take a dynamometer and "tow the pier" to measurethe thrust. If the motors will not overheat after this measureing, everything is all rigth.

@bernarddostie8892

Жыл бұрын

@@GeneralBlackbird I will have to try to change propellers if I want to make this boat tow anything, because those who are installed are a bit overkill. But I have to wait for the snow and ice to melt first! ;-)

Whats the overall length of this?

@bernarddostie8892

11 ай бұрын

I think it's 76 cm. It can take up some nice waves.

Hello , i am building the ship right now, but somehow. some of the links are leading to the end of thingiverse :) is there a way that you can send me the missing parts ? Controlpanel railing ect ? Thanks inadvance, nice build, have a lot how you build it.

@bernarddostie8892

4 ай бұрын

Send me an e-mail and I will send you the different parts you asked for. My email is : dostie.bernard@gmail.com

Hallo,wo findet man den elektronischen Bauplan? Die Links dazu sind ja tot.

@bernarddostie8892

2 ай бұрын

Hallo, ich bin nicht 100% sicher deine Frage zu verstehen. Meinst du den Plan den ich um 10:10 im video Zeige? Wenn du die 3D-Druckdateien gerne hättest musst du mir ein E-Mail schreiben : dostie.bernard@gmail.com Ich habe euxh ein Dokument mit allen teilen die ich mir für den Bau besorgt habe.

@ronaldi40

2 ай бұрын

Hallo, ich meine Elektrik, elektrischen Schaltplan

@bernarddostie8892

2 ай бұрын

@@ronaldi40 Ich habe den Schaltplan für dich gezeichnet. Schreibe mir eine E-Mail, damit ich sie dir schicken kann. dostie.bernard@gmail.com

What is Asa? Do you mean abs?

@bernarddostie8892

Жыл бұрын

ABS and ASA are almost the same, but ASA seems to have better wheather resistsance and I wanted something resistant (high Temperatures in summer and cold temperatures when winter approaches. I could've used ABS and it would've been the same after all. Thats my feeling.

What 3d printer is it?

@bernarddostie8892

Жыл бұрын

It's the i3 MKS

@ThatRCGuy1

Жыл бұрын

@@bernarddostie8892 I am going to buy a ender 3 and print/make this boat

@bernarddostie8892

Жыл бұрын

@@ThatRCGuy1 Go for it!!! I heard good things about the Ender 3, I think it would be perfect for your project. Don't hesitate to ask questions here, it's a lot of work to get everything done and I searched a lot of answers while building. 😉

@ThatRCGuy1

Жыл бұрын

@@bernarddostie8892 going to get one for my birthday

@ThatRCGuy1

6 ай бұрын

@@bernarddostie8892 legit just bought an ender 3 s1 pro haha been a while but worth the wait. Finally printing

I apologize if this a duplicate comment - I was unable to locate my original Would yo be able to repost the links that are broken or Email them to me?

@bernarddostie8892

5 ай бұрын

Send me an e-mail and I'll send them to you. I have those files one my Pc, but I can't find them on Thingsiverse anymore. dostie.bernard@gmail.com

What happened to UNSINKABLE 1 ?!?

@bernarddostie8892

Жыл бұрын

The name was an Idea (joke) of a friend!!! 😆 I don't know if another boat named unsinkable exists or existed.

Hi can you help me sir i am a builder too like you but i dont have more tools like you thats why i start from a cheep materials and tools 😢

@bernarddostie8892

18 сағат бұрын

We all start somewhere. I waited until I finished university to get into modelling because it ain't cheap.

Would you sell it?

@bernarddostie8892

Жыл бұрын

I take this as a compliment, thanks! ☺️ But no, it ain't for sale. So much time spent building it (200 hours and more) that I want to play with it and admire it for many years first. 😁

Hallo, ich meine Elektrik, elektrischen Schaltplan

@bernarddostie8892

2 ай бұрын

Bei 10min und 10 Sekunden im Video solltest du ein Diagramm des elektrischen Schaltkreises der Lichter sehen. Es ist unvollständig, da ich einige Dinge nachträglich geändert habe. Ich verwende ESCs, die einen BEC-Ausgang haben. Einer der beiden gibt mir 7,2 V und der andere 5,2 V. Das ESC mit 7,2 V ist mit dem ESC für das Bugstrahlruder, dem Schalter für die Hupe, dem Schalter für den Feuerwehrschlauch und dem Schalter für die Bilgenpumpe verbunden. An die 5,2 V habe ich die Lichter angeschlossen, die immer eingeschaltet sind, sowie den Schalter, mit dem die Such- und Deckslichter aktiviert werden. Ich werde in den nächsten Monaten ein weiteres Video mit mehr Details online stellen.

Eilezer⛵🚢🛥⛴🛳🇩🇴

What a benchy...

No comment from the Asian guy??

@bernarddostie8892

Жыл бұрын

Wich Asian guy? Peter, the American guy, commented! 😉

@titanicminion

Жыл бұрын

@@bernarddostie8892 I'm pretty sure he meant peter, I've seen stuff in peter's video's that gives away the fact that he's Asian (visiting his mom in the Philippines' during the water powered cargoship video)

@bernarddostie8892

Жыл бұрын

I understood that he was talking about Peter. I'm not sure that he's born in the Philippines, but it could be. I thought that it was not the best way to talk about Peter by calling him the Asian guy, it's a bit offensive in my opinion, but I can be wrong.

@titanicminion

Жыл бұрын

@@bernarddostie8892 I see, Well for me its not really. I am chinese and Idrc when someone refers to me as the asian guy. but... Good point