🚨 disclaimer. It was mentioned in the comments that having an outlet in a high moisture environment like a cabinet can cause rust and component issues. USE AT YOUR OWN RISK and be sure to do your own research. I don't plan on having my cabinet in super high humidity. Articles that I've read mentioned anything between 40 to 70% humidity will be okay for electrical outlets. I'll be honest and can't believe I overlooked this issue... I got too excited about showing this product and how cool it is to overlook the humidity issue. 😂 If it ends up not working out then I can easily swap it out for the grommet style cord system. Thanks for watching and thanks for leaving feedback. That is one thing that I love about reading. All the comments is I learn from you as well!

@aroidaddiction

Жыл бұрын

We have two milsbo tall ikea cabinets and they set at high 80s in humidity and we haven't had electrical problems in over a year. We have the cords out of the bottom.But now I won't grow another way I love them! 😊

@Stef_T-G

Жыл бұрын

It can't be worse than my micro ISB on my mini humidifier who rust slowly after few months... Although, I love those they're small and perfect in tiny spaces!

Hi Jeff! I used to run a small humidifier inside the cabinet, but after weather stripping the gaps and putting in a bunch of plants I find that just the normal cycle of the plants being watered and drying out is enough to keep the humidity at 50-65%.

@EverythingPlants

Жыл бұрын

I think I'll just keep it as is.....the humidity is maintaining at these levels

This was interesting. I don’t have any kind of a greenhouse but you made it look so easy. I feel I could do it.

@EverythingPlants

Жыл бұрын

It was a pretty easy build....making the hole felt a bit sketchy and installing the top took like 30 seconds to figure out haha

@iamjaviervillegas

Жыл бұрын

Same.. I get a bit intimidated by wanting to have one but I really need one for a load of small plants I have.

As you add plants, the humidity should increase without the need of a humidifier 😊

@EverythingPlants

Жыл бұрын

And it does! Thanks 👍

This is fantastic. I've been REALLY wanting a closing cabinet like this. Especially because Iv been an outdoor gardener for the most part and only recently getting into house plants. The few houseplants I've had in the past, I've been fine letting them go a bit dormant in growth through the winter. Now that have many more plants (not too many.....yet lol) I've been trying to figure out what to do for the winter. This would be perfect. Unfortunately I don't have the space for it (or the $) at the moment so I'm planning on setting up my laundry room with a bunch of grow lights, space heater, humidity, etc. The biggest problem though is that I can't see them through the day! This would be SO perfect. I can't wait to see updates on changes you make over time. I've seen some beautiful cabinets set up with lots of moss and plants that turn out looking like a tiny piece of rain forest.

Excellent job! Been wanting to do this for ages but Mrs Sheffield won't allow it ☹

@EverythingPlants

Жыл бұрын

Just tell her you need to keep up with the content.....🤣

Loved this! I love the magnetic shelves, I feel like it gives you more range to display your beautiful plants! I’ve heard mixed reviews on the weather strips, some people say it’s good to leave it for natural airflow as it helps with root rot but then others say it’s better so it helps with humidity Looks great! Really enjoyed seeing how you put it all together

@EverythingPlants

Жыл бұрын

I am leaving the weather stripping off. Humidity today is 70% in there

The cabinet looks great! Thanks fir sharing this project with us, I'm looking forward to future updates!

@EverythingPlants

Жыл бұрын

Thanks for watching!

🎉🎉🎉Great Job!!!! I love the solid metal back and magnetic shelves😍🤩😍🤩!!! My gf has the peg board back and during a huge pest outbreak, I found mealies and mites in the holes😠. We weather stripped her cabinet for pest reasons. The humidity goes up without it after plants are thoroughly watered.💓. Great video 💖

@EverythingPlants

Жыл бұрын

I never even thought of pests hiding in there ....yikes

I drilled a hole in the top back panel. Figured out the largest hole I needed to feed through cables and used a grommet so the wires didn’t rub on the sharp metal edges. Took it to my drill press and put wood under it for stability. Jeff, your drilling of your 2”? Hole seemed to go very well but have seen other struggle. I run my electrics down the back out of sight because of the solid back. I use those shelves too. They work well!

@EverythingPlants

Жыл бұрын

That's a good method as well... To run the cords out the top. That's the nice thing about seeing everyone's project is how differently they set it up. I've already taken some heat in the comments about my outlets being inside the cabinet. Now I definitely understand the concerns for this, but I don't plan on mine being extremely humid so the point where there's condensation on the glass. I think I might have to make a short follow-up video explaining the importance of not using electrical outlets in high humidity lol

You made the drilling look so easy! I’ve been too nervous to drill mine. Your cabinet looks great - I think you will really enjoy it.

@EverythingPlants

Жыл бұрын

It would have been a disaster if I tried the wood specific drill bit....I've seen some of those before

I like the way you do videos, simple & direct. I've used hole saws on wood but never on metal, so appreciate that, too. I've wanted the "fabrik" (I think that's how it's spelled, not sure) to make a greenhouse from, I really like the retro look of them. They're not a big as the rudsta but I just want it more as a display than a serious greenhouse, probably for ferns.

Great job!! Love to see your work. BTW, the 'prop box' with perlite is the best idea, I never lose any cuttings with it. Thank you!!!

@EverythingPlants

Жыл бұрын

That is amazing!

I like the size and you did a great job putting it together. Nice video!

I am also a huge fan of this idea! I like the idea of having doors instead of just open shelves. Would like white, but I could handle black.

@EverythingPlants

Жыл бұрын

I think they might actually have a white Rudsta cabinet... I'm actually not too sure

Your cabinet looks great Jeff ! 😍

@EverythingPlants

Жыл бұрын

Thanks Grace!

A great looking cabinet Jeff and a nice job setting it up. One issue I would foresee is that electrical components that aren't enclosed will rust and arc very quickly in the high humidity of a grow cabinet. Also you will have open ports that are not in use, have you thought about the danger of potentially dripping water into those, not just from your watering but also Transpiration?

@EverythingPlants

Жыл бұрын

Hello. I won't be keeping the green house super high and it's looks like as long as it's 70% or lower then it should be okay. I will have to try and find a cover to place over top of it for the transpiration like you mentioned. Another thing I read online about outlets is that as long as there isn't condensation on the glass then there shouldn't be an issue. I'll be honest... I think I got too excited about the convenience of this type of plug to not realize that moisture might be an issue. If it doesn't work out like I expect then I can easily switch it to the grommet style.

That’s so cool, I didn’t know you had an Amazon store, will definitely use it when I buy something that I can use it to do so

@EverythingPlants

Жыл бұрын

Thanks Aaron!

Congrats on your new toy! You’re like a little boy with a fire truck; I can see how happy you are Jeff!

@EverythingPlants

Жыл бұрын

Thanks 👍

Baller.. looks great

@EverythingPlants

Жыл бұрын

Thanks, I really appreciate it!

Wow, that looks great! We’re all excited for you. 😂 On a side note, got my pH test indicator today. I tested a few sources and the distilled water from the store is in the optimal range. I will get the pH down for my filtered tap water. Thank you so much for these tips.

@EverythingPlants

Жыл бұрын

Just curious what was your filter tap water at?

@Nat-cj4ff

Жыл бұрын

@@EverythingPlants 7.5, and the distilled is 6.5. My local Sheridan Nurseries gives free fertilizer fill up and that is in the 6/6.5 range so perfect.

Fun video. Nice cabinet, looks good!

@EverythingPlants

Жыл бұрын

Thanks!

Thanks for the vid. Was wondering if that cabinet has shelving that spans the width as well, or is it without shelves? Those magnetic shelves are genius though. Cheers.

@EverythingPlants

Жыл бұрын

I think they're pretty neat.

I love the excitement! These builds are fun. I built one last year, didnt do the hole for cables but i do also have those magnetic shelves! Im thinking of doing a Milsbo Tall so I can put taller plants. Im nkt willing to part with the $299 price tag just yet

@EverythingPlants

Жыл бұрын

Everything is expensive 😭

Great job Jeff !!!

@EverythingPlants

Жыл бұрын

Thank you so much!

Been watching on the Apple TV so haven’t been commenting but TFS. I was wondering when you would cave lol. I got a Milsbo wide (white) in 2020. Love love love it. With enough plants my humidity is between 50-80% winter - summer. I didn’t weather strip.

I can't say if I prefer the cabinet or the ASMR with the paper and the sharpie 😅 Really awesome project! I'm thinking about one, but I don't know where to put it haha

@EverythingPlants

Жыл бұрын

Thanks so much.....I'm glad you liked the video!!!

I have those same magnetic shelves, mine are stuck to the side of my fridge and used to store spices 😂 I love your setup!

@EverythingPlants

Жыл бұрын

You can use them for plants too! Haha

Jeff I don’t think you have worry about humidity unless water actually runs down and gets in it. Nice set up though

@EverythingPlants

Жыл бұрын

I'm assuming you're talking about the electrical cord outlet?.... Yeah I'm not worried about humidity or anything with that, but of course you need to maintain caution

@wendyacker245

Жыл бұрын

Yeah that’s what I was talking about

Awesome. Wondering the fc that grow light is giving out. I have two barrilla lights and I don’t think is enough to reach good light to the bottom of my cabinet. I also used electrical tape on the outside of the gaps to keep humidity in. I found the weather strip kept coming off due to humidity.

@EverythingPlants

Жыл бұрын

I completely forgot to add this into the video.... I did film a section that had the foot candles but for some reason I didn't see it in editing and honestly forgot about it. I will be making another video soon with this information

The cabinet looks great and a really good video for hints and tips. I am curious to know why you bought it (what you hope the benefits to the plants will be or was it aesthetics to frame the plants), either way would be useful to know the aims and then as the updates come along, to see where it meets expectations or changes as time goes by.

@EverythingPlants

Жыл бұрын

Very interesting question.... I have wanted a cabinet for a long time and now that I have one I am not 100% sure of its purpose yet. One angle I'm leaning to is using it for my anthuriums. As I continue to gain more of these plants, I would like them to be a little bit more protected from the rest of my collection.... Not that they are inferior to the anthurium, but maybe to see if I can keep a more consistent humidity specifically through our dry winters. As of right now that is the direction that I am leaning towards. What are your thoughts?

super velcro is what I used for my lights. works great!

@EverythingPlants

Жыл бұрын

Nice!!!

Nice idea, I might get one of those cabinets. I think it would be better to install all the wiring in the top of the cabinet though. Stay Safe!

@EverythingPlants

6 ай бұрын

So far zero issues with anything, but I may switch out that outlet simple for space reasons

Maybe it will be better to use safety plugs on the open outlet parts to keep them from high humidity at least a bit? And i think you don`t need pebbles or perlite in the water tray to raise humidity, they are used only to keep a pot with plant out of sitting in water, just water will be fine and will still evaporate

@EverythingPlants

Жыл бұрын

Thanks for watching. I don't know how I overlooked the humidity issue with electrical outlets.... But I don't plan on keeping my cabinet in super high humidity. I made a disclaimer comment that addresses this issue. Thank you for bringing it to my attention. I also should have mentioned that I do plan on placing a plant on pebble tray.... But you are correct. You technically don't need pebbles for humidity lol

There's a gap at the top of the Rudsta that you can feed wires thru if you feed them thru before you put the screws in and top on. That's what I did with mine because I didn't want to put a hole in it. I didn't need a humidifier. Mine stays above 80 in summer in winter it was 50 ish. I have my fans set to go off for 10 minutes every 5 hours. So far so good.v

@EverythingPlants

Жыл бұрын

What??? I did not know about this hole. Do you have to take off the top to remove them?

@shellym79

Жыл бұрын

@@EverythingPlants yes. It's not a hole really, there's just a gap between the top of the glass and the bar that runs width wise. Just big enough for the cords to fit but not the plug part so you have to set up the wires first. If you remove the lid then unscrew the bar the runs from front to back on either side lift it place the wires thru and close it up. No holes needed. The wires have to run up to the top tho and out the side. Some may not like that look. I have 1 of the magnet spice racks on the back to hold the extension cords up high. I watched someone here on KZread do it unfortunately it was a year ago and I can't remember who it was. Maybe good growing. Not sure.

Looks great! I actually got the Milsbo and the Rudsta this week but haven’t assembled the Rudsta. I don’t want to drill holes so I’m hoping the gaps are wide enough on both to run the cords through.

@EverythingPlants

Жыл бұрын

I think you could fit the cords through.....

@josiemojica3674

7 ай бұрын

I have a milsbo wide. I have two barrinas t5 at top. At back of milsbo there’s a hole but it’s not large enough for the light cord so a few options, widen that hole or cut and rewire the light cable (this is what hubby did for me). No need to drill hole at base. Also, you don’t really need fans or other power pieces. My cabinet is not weather sealed and in terms of ventilation, I open up cabinet a few hours a week and have not had any issues. At beginning I did have two small fans that I run cord through gaps of doors but at the end I just took out.

Awesome!!! ❤

@EverythingPlants

Жыл бұрын

Thanks 🤗

Ooooo very nice 👏💚🤩

@EverythingPlants

11 ай бұрын

Thanks!!!!

I have my milsbo for 2 yrs and the hole i dont like it i like the one u made ima go to your storefront and get the saw and the cord thank u

are you worried about condensation building up and getting inside the socket at the bottom?

@EverythingPlants

3 ай бұрын

It was mentioned initially in the comments and honestly I didn't think anything of it..... Just an update. I've had no issues with it so far and everything's been working wonderfully

Will the electrical outlet be okay with the high humidity?

@EverythingPlants

Жыл бұрын

I'll have to check the ratings, but honestly I didn't even think of that.

Super dumb question. Wouldn’t the outlet you installed susceptible to humidity damage? thank you.

@EverythingPlants

14 сағат бұрын

Honestly didn't really think about that when I was building it.... But I've had it for quite a while now and no issues

Did you end up using the weather stripping for better insulation? Did it work/would you recommend? Thanks for the video!

@jakersaridakis

10 ай бұрын

Just opened your next video and you mentioned not using the weather stripping 😆

@EverythingPlants

10 ай бұрын

Yeah so far I have not added it onto the cabinet. I did add a little container of water near the fan to circulate and increase the humidity. So far it's maintaining between 50 and 70%. So I'll keep an eye on it.

You’re just as emotional about your cabinet as I was with mine😅. Still one more accessory to arrive before I make video. 🪴🌿🙋🏼‍♀️💚🌱

@EverythingPlants

Жыл бұрын

Nice! Which cabinet did you get?

How is the electrical socket inside the cabinet doing now? Has any of the humidity, bothered it or caused any issues?

@EverythingPlants

Жыл бұрын

Nope, not at all.... I actually made a follow-up video with this issue for tomorrow

@mydogmyplantsandme

Жыл бұрын

@EverythingPlants OK great! I can't wait to see it. 😃

So cool 🪴🌱

@EverythingPlants

Жыл бұрын

Thanks

I have had my rudsta for less then a year but three of my plants have now grown so big they are nearly touching the light on underside of top shelf, I want milsbo cabinet but not allowed to get one 😢😢

Are you concerned with the humidity getting into that outlet since it is inside of the cabinet?

@EverythingPlants

11 ай бұрын

Nope.....it is less than 70. It's been in the mid 60s and doing well

@bellauncensored8834

11 ай бұрын

@@EverythingPlants thank you!! I love that as opposed to drilling the hole and using a grommet.

Is that plug moisture safe, like if it gets water on it

@EverythingPlants

5 ай бұрын

Doubt it lol. His video is a few months old now and I've had zero issues

How has that outlet held up w humidity??

@EverythingPlants

11 ай бұрын

Zero issues

Um, I certainly would not want an electrical outlet on the floor of a cabinet where you are watering plants. I suggest you place it on the back of the unit above the bottom and include a GFCI connection for any water or humidity.

@EverythingPlants

Жыл бұрын

Yes, I hear you're concerned..... But I don't plan on letting the humidity get very high. Outlets, I believe our certified for humidity ranging between 40 to 70% before you start to see any rust concerns. I most likely won't be watering in the cabinet. I like to remove plants from their spot and spray them down to clean the leaves. I'll let them dry and place them back in the cabinet. I'm not worried about any water getting into the outlet itself, but I may find a cover for the outlet just to be on the safe side

Your link to the Mother grow lights doesn't work.

@EverythingPlants

10 ай бұрын

Interesting....I haven't been informed of any change. Try the link or 'EVERYTHINGPLANTS'

With that power socket placed below, it is a potential hazard!!! Good luck

@EverythingPlants

Жыл бұрын

I'll have to find a cover to place over top