Another top notch money saving video.. for me its the best diy youtube channel by far. Thanks for sharing with us your expertise

@TheDIYGuy1

3 ай бұрын

Wow, thanks! Glad your here!

I love these videos for making my life harder😂😂

Another great video, people it is really worth joining the DIY club, lots of DIY channels out there but in my opinion this is the best one. The club is great for advice/opinions and members projects which we can all learn from. It is a very friendly community.

@TheDIYGuy1

3 ай бұрын

Thanks very much. Appreciate the support and it means a lot to hear that you think this channel is the best.

@iangregoryhome

Ай бұрын

I think some things on here are a little beyond DIY level.

Ah, the good old putting wall plug in a mortar joint.

Fantastic video 👍 some very useful tips and tricks 💡thank you 💡

@TheDIYGuy1

3 ай бұрын

Glad you enjoyed it!

Thank you for another great and easy to follow tutorial, DIY King 👑 I love the small tips along the way and you always present so well and clearly for us to follow. You're my go to DIY guru and I always look forward to your posts 👌

@TheDIYGuy1

3 ай бұрын

Thanks a lot for the support! I’m just getting started. Wait to see where we go from here 😉

@schmutzlibuab

3 ай бұрын

@@TheDIYGuy1 No problem! I am really enjoying your videos and am inspired by you to try things I probably would not have done otherwise. I am just getting started with DIY so I am looking forward to where we all go from here with you 😁

Splendid 👍🏼👊🏼🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧 Thank for the demo and info.

@TheDIYGuy1

3 ай бұрын

No problem 👍

@melraine919

3 ай бұрын

@@TheDIYGuy1 You’re welcome

Great easy to follow video. Only thing i do different is swap out the plastic wire block that comes with the light and change them for wago connectors. Less fiddly if your on your own working. Excellent videos as usual

@TheDIYGuy1

3 ай бұрын

Brilliant glad you like the vid. great tip too

Great video, many thanks

@TheDIYGuy1

3 ай бұрын

Glad you enjoyed it

Great job 👍🏻👍🏻

@TheDIYGuy1

3 ай бұрын

Thanks 👍

or you can do it correctly and wire in/out each light. this is fine but you now have 3 end of lines on circuit

Nice to see that extra work to seal with silicone.

@TheDIYGuy1

Ай бұрын

Thank you! Cheers!

7:47 The simplest and easiest to remember wire discoloration was taught me by a former LEB road circuits specialist: To neutralise someone, you beat them black and blue.

@TheDIYGuy1

3 ай бұрын

😆

@bnstd

3 ай бұрын

Or the other way, brown and red is the colour your pants turn if you touch the live.

@GretatheEvilGremlin

3 ай бұрын

Doesnt really work now black is a line conductor only.

Good video. Compared to other trades sparkies have become too pricey for a lot of regular homeowners, for small domestic jobs like this. So it might make them grumble but i for one am grateful to youtube and people like you 👍

@steve11211

Ай бұрын

The problem is the installation is not compliant to the wiring regulations because he has used plastic clips so no consideration has been given to premature collapse, this a requirement since a spate of firefighters going in to fight a fire but getting caught on the way out by cables that have collapsed and blocked their exit resulting in the death of some firefighters. It may seem like nothing and the likelyhood is small but the reason you hire a sparky is so the job is done right.. Also the RCD was not tested, all outdoor lights must be RCD protected (Although you could probably get away if its class 2), as a class 1 light the earth was not tested so you have no idea if it will provide protection in a fault. I would also have put in an isolator so in the event that the outdoor light causes the RCD to trip it can be isolated and the circuit re-energised. I would have also put silicone around the top and sides of that box and drilled a small hole in the bottom so if water did get in it could come back out. The reason sparkies are expensive is because we have to have very expensive test equipment to ensure the installation is safe and a lot of training. My mate Dave down the road says he could do heart surgery at a fraction of the cost of an NHS doctor, he has no qualifications but has watched a few on youtube. Would you get heart surgery from Dave or will you stick to an NHS doctor? Even someone proficient in DIY like the guy on the channel has failed in a lot of ways with this install which shows your average DIY'r should not be attempting electrical work, you should see some of the DIY shoddy workmanship and faults electricians see on a day to day basis.

So how do you put an outside light of you dont have any?

@jeffreywharton512

Ай бұрын

Prob have to run a new wire from a control panel and add a switch.

Cheers from a Dad trying to do stuff Grandad did

@TheDIYGuy1

2 ай бұрын

👍

QuickWire Splitter, simples👍

@TheDIYGuy1

3 ай бұрын

Indeed!

My clients normally buy lights with the round back box, really fun trying to get them level. That light looks good for connecting but often I ditch the blocks and throw on Wagos, especially if I'm going to be up ladders.

@TheDIYGuy1

3 ай бұрын

👍

I do like the Quickwire products. In a job like this they are great as no extra cable is needed in the line you're cutting in to. British made as well.

@TheDIYGuy1

3 ай бұрын

Totally agree!

@quickwire80

3 ай бұрын

Yes, all manufactured in our factory in Reading UK! Thanks for the kind words :)

Good to see you.

@TheDIYGuy1

3 ай бұрын

Hey, thanks

@JP_TaVeryMuch

3 ай бұрын

Be able to see him at night now, too.

@TheDIYGuy1

3 ай бұрын

😂👍

I think cutting through the 3 core cable with only the live isolated via the mcb will cause a distribution board fitted with a rcd protective device to trip one side of a split board due to the earth /neutral still being connected. Hope no one indoors turns the power back on including the mcb because their Xbox went off.

When cutting the original cable, beware if the circuit is RCD protected that you may well trip the RCD. Cutting through the cable with the wire cutters can cause a short from neutral to the protective earth which could trip the RCD. Not really a problem, but worth knowing about. Alternatively, strip the cable outer and then cut the internal wires individually making sure not to touch the neutral to the protective earth on the feed.

I would be proper impressed if you show us novices the real DIY issue where the wires are not accessible at the back. If they are so easy to reach there really is no problem.

Great video 👍🏼 I love your content. Keep it up. Could I ask an unrelated question. I need a new boiler and am repositioning it into the bathroom. I’ve got a gravity system and two aqualisa quartz showers. I’ve only got a 15mm mains coming into the house. Is there anything wrong with me keeping a gravity system? It’s easier all round.

Tip you can use drill bit let it cool ofc to pull cable thru if your having trouble

There's always one... more thing to mention. Setting your silicon solution aside, maybe you could have belt and braced it with one of those "if you haven't got an SDS drill you can..." helpful tips of yours. Just wanted to suggest that a mention of a drip curve in the cables wouldn't go amiss. Great video thanks. Never seen those quite fancy O/S lights. Like them cos they're sort of a cross between airport landing crews glow stick direction aids and (and I'm surprised that I'm the first to say this) a half-size light sabre. Just need to retrofit them with a choice of coloured LEDs so that when they show red, the missus and kid know to leave daddy alone with his whisky by his new fire for a few minutes more.

@TheDIYGuy1

3 ай бұрын

Thanks for the feedback and glad you liked the video 👍

@JP_TaVeryMuch

3 ай бұрын

@@TheDIYGuy1 Cheers, just a post pub lunch thought. As you can tell from how long it was.

Now thats a nice neat handy bit of kit! Great video tutorial as always!

@TheDIYGuy1

3 ай бұрын

Thanks 👍

I go OTT with conduit for extra protection

I’m currently doing my electricians course and the theory is so bloody long winded and difficult but watching the practical seems a piece of piss 😂 Nice video thankyou

@TheDIYGuy1

3 ай бұрын

Your welcome

As per usual, a nice tutorial well explained. Junction box is a good idea for speed and tidiness, but these are only IP30 rated (according to the manufacturer), so absolutely not fit for anything but the driest of locations. Personally, I would treat a garage the same as a kitchen in terms of humidity levels. You want at least some protection against moisture. Inside a garage, I'd probably use an IP55 rated standard junction box. Same price. Plenty of ports for multiple cables and space inside for terminals, plus they are impact resistant. Horses for courses. Belt and braces.

@markellis3648

Ай бұрын

What’s the point of impact resistance on this job, iP 30 is fine in this location but yes if the price is the same for better protection do it, however the installation is not safe on multiple counts. Follow 7671

Nice quick solution, big thumbs up. What were those light fittings you used?

@TheDIYGuy1

3 ай бұрын

They are really old and I don’t remember where they came from. Sorry I can’t help with that.

would have been simpler to run the cable from inside to outside, it would have save all the pushing of all your cable through your hole rather than the half meter required.

Absolutely brilliant video. Never seen the Quickwire Splitter....so much easier than using a junction box or daisy chaining the wires in and out of the lights either. I'm from Northern Ireland and I don't see any stockist nearby that sells these very handy splitters....I suppose I could contact the company and buy from them directly. I really do enjoy your videos and have subscribed to your channel early on because the videos are clear and easy to understand. Great stuff

@TheDIYGuy1

3 ай бұрын

Glad you enjoyed the video. Thanks for subscribing! Speak with Quickwire to see if they can advise on stockists

@MikesShaw

3 ай бұрын

Amazon stock them

@quickwire80

3 ай бұрын

We don't have many suppliers in Northern Ireland, but feel free to place an order on the website!

@davidjohn0505

3 ай бұрын

@@quickwire80Thanks but I don't think there any stockists in Northern Ireland listed on your website but I see from another person above replying to my comment says they are listed on Amazon....so that's the way I will go...Thanks anyway

@davidjohn0505

3 ай бұрын

@@MikesShaw Thanks Mike.....thats the way to go...faithful Amazon again to the rescue

Excellent, thank you. Presume only for radial circuit?

@HW55

3 ай бұрын

Correct. UK lighting circuits are all radials. Rings only apply to socket circuits. You could theoretically take the feed from a socket circuit but you’d need to incorporate an FCU that fused the circuit down to 3 or 5 amps.

I take if everyone can do this, then everyone has a multifunction tester and test certificate software to complete a minor works certificate

@danr2370

3 ай бұрын

😂😂😂 if it works it’s fine . Don’t worry about it

@Sparkyjedi

3 ай бұрын

Well said, I love how he does his background checks, main earth,earth to gas and water , ze,zs, R1+R2 and RCD,I don’t know why I went to college for all those years anyone can do it

Excellent video as usual. It may have been easier to use two splitters, one as shown and another near the left hand light to feed the right hand light. and then you need less cable. Also if you feed the cable from the back of the pillar you are not dragging all the cable through the brickwork potentially damaging the sheathing.

@TheDIYGuy1

3 ай бұрын

👍 good point

@quickwire80

3 ай бұрын

You can daisy chain as many of our splitters as you like! Well, there is a limit somewhere, but you'd never get to that amount in the real world ;)

Good video as always, nice lights, where are they from?

@TheDIYGuy1

3 ай бұрын

Thanks a lot. To be honest I have no idea where they are from, sorry I can’t help with that.

Neat bit of kit. Great video, thanks for uploading 👍

@TheDIYGuy1

3 ай бұрын

No problem 👍

Excellent video, did you know that the cable clips should be positioned with the nail below the cable 🤔

@markellis3648

Ай бұрын

Exactly, this guy is not an electrician

Run the cables inside first, then you're only feeding a short amount through the brickwork. Saves the cable grazing or looking scabby. Metal clips or support for premature collapse too.

@anonymousdeer9988

3 ай бұрын

Oh and put the clips with the nail at the bottom

@markellis3648

Ай бұрын

What the heck

Thanks for another great video. Love the channel. I'm really interested in your electrical videos and always wondered if you are qualified. This is by no means a criticism. You are clearly very knowledgeable. It would be interesting to have a video on this. Just a thought.

@user-om2oy4re4d

3 ай бұрын

​@HalfTheWorldAway-mf5cf his clearly not qualified as he does a DIY channel, but also this is probably his own house so wouldn't need to worry about lock off kits 😂😂

@Simo8912

2 ай бұрын

I’ve never had a qualified electrician use a lock off kit yet?

@user-om2oy4re4d

2 ай бұрын

@Simo8912 if its a domestic property or even at empty commercial/industrial unit then you wouldn't need to bother with a lock off kit, but your taught to use a lock off kit regardless

@user-om2oy4re4d

2 ай бұрын

@@Simo8912 also because they don't use them, doesn't mean it's the correct way, majority just don't bother using them

@user-om2oy4re4d

2 ай бұрын

@HalfTheWorldAway-mf5cf I totally agree, that's why I said an "empty" industrial or commercial unit not a domestic property, no one touches the electrics on any of our sites 🤔 but your right we are taught to lock off regardless and perform safe isolation. I was just making a point that so many don't bother

Good video, thanks. Why drill slightly uphill? For water drainage?

@TheDIYGuy1

3 ай бұрын

So that water cannot track back along the cable. Although it shouldn’t be able to with the silicone.

@markellis3648

Ай бұрын

So you can’t get the protective conduit in that supposed to be fitted

Doesnt that need to be in a junction box so it protected and the cables ran in conduit/trunking?

@TheDIYGuy1

3 ай бұрын

No, it is a junction box and is maintenance free(mf) so can be concealed too if need be. Conduit is not required either.

@jamieb.lsfivepd9276

3 ай бұрын

@@TheDIYGuy1 interesting, thanks.

Good video however it doesn’t comply to regs. Cables should now be fixed with fire rated fixings to prevent collapse in the event of fire . Reg 521.10.202

I take it the wire feed can be taken from the existing lighting circuit, and nearest light socket. If you want a switch, then I just add a junction box, for the switched live to branch off to the switch box?

@TheDIYGuy1

3 ай бұрын

Yes 👍

Have you got a Link to those lights please? very good informative Video Thanks

@TheDIYGuy1

2 ай бұрын

Glad you like the video. Sorry I don’t have a link for them

I’ve not come across those before. I like it. Could you achieve a similar result with a Wago box and connectors or am I missing something?

@dirtjumper23

2 ай бұрын

of course, I'm assuming he's sponsored by them and it's a shame it's not more readily declared

Great video! I have just this scenario at home however the cable is three core + earth as it runs to/from a light meter. Can the quick wire spliter help?

@quickwire80

3 ай бұрын

I'm afraid we don't have a 3-core version yet, but we are working on one!

Splitters look great, very convenient, I will get some. Great video too, thank you. However any light such as those that shine upwards are a menace. I call them Bat-Signals, everyone is installing them everywhere and in my case on two homes I've lived in my neighbour's bat-signals have shined into our upstairs bedrooms, really annoying, particularly when they are on PIR sensors.

@TheDIYGuy1

3 ай бұрын

Glad you like the video. Fair point on the lights

@quickwire80

3 ай бұрын

Our splitters are indeed excellent, if I do say so myself ;) - if you need any help/have questions just let me know :)

Can you use these splitters to add an extra double socket indoors?

@quickwire80

3 ай бұрын

Not with these as they are rated at 16A for lighting. However, a we have 24A junction boxes for 2.5mm cable available, and they would be perfect for the job

The drill rod, use that as cable rod :) hehehe

@TheDIYGuy1

3 ай бұрын

Certainly could 👍

Great video. When should you use a conduit for cables inside the garage? I tend to use conduit for all cables below joist hight - don't know if this is overkill?

@TheDIYGuy1

3 ай бұрын

I would say it’s your call and there’s not really a right or wrong. Personally, I don’t and I see it as overkill but that’s just me. Thanks

@Mike-H_UK

3 ай бұрын

@@TheDIYGuy1 Cheers, thanks!

Good video, is the product you’re using the QSP34 (16a 4 way splitter) ?

@TheDIYGuy1

3 ай бұрын

Thanks. Yes it’s a 16a 4 way

@quickwire80

3 ай бұрын

Yes it is! We also have a 2 way splitter which is 16A. AND, now 24 amp slitters too.

👍 👍

@TheDIYGuy1

3 ай бұрын

🙌

Could you do a video on how to run a new power socket supply and light fitting from the main house into a detached garage that has a paved path in between? No power in the new detached garage and need a supply for a fridge freezer and light.

@richardclarke9966

Ай бұрын

Are you asking him to buy a house with a detached garage and this same situation to teach you how to do something? 🤣

@Elfin4

Ай бұрын

@@richardclarke9966 Clearly Not. Just wondering what the approach would be and if a separate Breaker would be required at the consumer board.

@richardclarke9966

Ай бұрын

@@Elfin4 The approach would be to call a qualified spark

I wish we had something like those Quickwire splitters and in-line splices here in the US. Our cabling is very similar in design and construction to that in the UK, but we don't get to have anything like that here. There are plenty of imporant ways our power systems are different though, so I guess there are reasons. Are these considered maintenance free to install in inaccessible places like ceilings, floors and walls?

@TheDIYGuy1

3 ай бұрын

They are indeed maintenance free 😊. Quickwire take note, bring these out in the US lol

@quickwire80

3 ай бұрын

We'd love to get them over to you one day. I think one of the reasons is you guys use Romex cable, right? It's hard to strip with Quickwire strippers and to prepare because of the paper covering it seems to have?

@marcberm

3 ай бұрын

@@quickwire80 Correct, Romex or Lumex depending on where in North America, but both are the same. Two or three insulated conductors and a bare ground wrapped in paper. The paper sleeve is typically removed as far back as the outer insulation. It might take minimally more effort to line-up the conductors properly, but it would be worth it. We have one or two in-line options for a single splice/connection outside of a protected junction box, but nothing as elegant as the Quickwire solutions.

Have those lights got PIR sensors? If so then you would leave the switch on or were they on an unswitched feed?

@TheDIYGuy1

3 ай бұрын

They do have PIR and the switch stays on.

This video was fu*king awesome

@TheDIYGuy1

3 ай бұрын

🙌👍

Would have been nice to see them lit up at the end

@TheDIYGuy1

3 ай бұрын

Yeah I should of added a shot of that

Hi mate, what are the lamps you installed? I've been looking for this type with motion sensor way too long.

@TheDIYGuy1

3 ай бұрын

They are really old and I don’t remember where they came from. Sorry I can’t help with that.

Lights look great..where are they from please ?

@TheDIYGuy1

3 ай бұрын

I’m not sure, they are years old and came from a previous property. Sorry I can’t help more

👍

@TheDIYGuy1

3 ай бұрын

👍

Hi, could you please let us know where to get the pliers you used on 7mn of the video.

@TheDIYGuy1

3 ай бұрын

They are knipex installation pliers 😊

I enjoy doing a bit of diy electrics, like adding spurs, replacing sockets etc, but I was of the understanding that outside mains powered lighting must be fitted by at least part p qualified electrician.

@huckfinn8444

3 ай бұрын

All new circuits or modified ones need to have a Minor Works Certificate completed.

@RandomShart

3 ай бұрын

@@huckfinn8444 I'm talking about external work, I don't think DIY work is permissible even if you test it yourself afterwards and fill out the certificate.

Wouldn't it be best practice to wire up the light before you connect the other end, even if you've isolated the circuit?

@TheDIYGuy1

3 ай бұрын

It makes no real difference but if you prefer to then go for it 👍

@markellis3648

Ай бұрын

Absolutely correct to connect to the existing system last, safety first

Any testing after the install? Zs reading etc?

Sorry but I thought electrical joints in the UK were required to be open for nvestigtion so integrated and closed systems were not an option. Hence why unsponsored I used WAGU connectors and WAGU connector boxes, sealed with cable ties as they are designed but if anyone wants to investigate them, a snip and the box is open and then you can see the wiring in the box.

@TheDIYGuy1

3 ай бұрын

The Quickwire splitter is maintenance free. A maintenance free joint is required in a concealed location. In this particular case a maintenance free solution is not required.

@richardclarke9966

Ай бұрын

You use Asian beef to connect wires? Mental.

When you say ‘you’ do you mean qualified electrician? What I mean is, does this job have to be done by an electrician or at least certified? Or do we assume that you know these jobs you show us, are safe and legal to be done entirely DIY?

Any link for the outside light that you’ve installed?

@TheDIYGuy1

Ай бұрын

Sorry I don’t have one 😩

@jeromebernardo3758

Ай бұрын

Where is it from? What brand is it? Thanks!

didn't see them on :( but good tute dude

@TheDIYGuy1

3 ай бұрын

Yeah my bad! Forgot to add a night time clip

Hi can you use the splitter method to run sockets or is it just for lighting

@tonyclark9851

3 ай бұрын

The have just brought out ones for sockets theses ones he's using are for lighting only

@TheDIYGuy1

3 ай бұрын

👍

@H4mbo

3 ай бұрын

@@tonyclark9851 So are the 24A versions for sockets and the 16A versions for lighting?

@tonyclark9851

3 ай бұрын

@@H4mbo yes that's right

@quickwire80

3 ай бұрын

Yep!@@H4mbo

The one thing I always have issues with, is putting cable clips in. The buggers just ping off the wall on the first hammer strike. Not sure why I'm so special at that! 🤷🏻‍♂

@TheDIYGuy1

3 ай бұрын

It’s annoying isn’t it. But here’s a couple of tips. 1 - buy good quality clips(personally I like the Schneider ones). 2 - hit the pin into the point where the brick meets the mortar as it’s a little weaker there. 3 - find softer mortar 😂

@GretatheEvilGremlin

3 ай бұрын

Top tip is use a 20oz claw hammer. Press the plastic clip down with your index finger, then its one short fast impact strike of the nail. Once its got hold, move your finger and drive it home. Just takes practice that's all.

@Smithb83

3 ай бұрын

I had this issue recently, I cut dowels in half, drilled short holes in the mortar line same size as dowel (were 6 or 8mm) and tapped them home with the hammer. Clips hammered in beautifully. Might be ott but the cable is really neat now and every clip went in easily 👍🏻

black n red to start with then blue n brown?

@TheDIYGuy1

3 ай бұрын

I put a wiring colour chart in the video that explains this.

@GretatheEvilGremlin

3 ай бұрын

Older wiring red and black. Newer, harmonised colours introduced 2004 and mandatory from 2006.

Splitter looks good put instead of pulling all that wire through, why not push the wire through from the back?

Great installation and instructions. All i would like to add is that any electrical work carried out by DIY may require a certificate from a qualified electrician.

@kingofthetrowel1725

3 ай бұрын

No sparky wotrth his salt will certify third party work, it’s all good this diy electrics but your home insurance is void as soon as you piss about with it

@sprint955st

3 ай бұрын

@@kingofthetrowel1725There are hundreds of jobs that are safe and legal DIY don’t need certification and insurance don’t bat an eyelid. Otherwise something like 70% of homes would not be insurable.

@JIBS.

3 ай бұрын

@@HalfTheWorldAway-mf5cf It's why these DIY electrical videos are so dangerous. Unfortunately many on here in the comments will do the job and think excellent it works, not knowing whether or not the RCD trip, whether the wiring was safe in the first place. The list goes on

Do you not need to be a qualified sparky to touch electrical stuff in or around a house?

@TheDIYGuy1

3 ай бұрын

Not necessarily.

@GretatheEvilGremlin

3 ай бұрын

Depends on level of competence, and if the work requires Part P compliance with building regs, which this does not.

Is there a video of him drilling through into a nicely painted hallway. And clipping wires through there. Or does he only do garages. ?

@TheDIYGuy1

3 ай бұрын

Not seen my home renovation content where we are doing re wiring then I take it?

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

You actually did a solid job of installing these additional lights. However, do you do any testing after installation to ensure the installation is safe - namely R1+R2, insulation resistance, ZS reading, and RCD trip times? It's mega important with any electrical accessories outside that they are installed correctly and pass initial verification, especially when they are a class 1 accessory like these are? If there weren't earth continuity at these lights, for example, then under faults conditions, there would be no path to earth until a person touches the metallic exterior which would lead to an electric shock or worse. If you aren't testing your electrical works with an MFT, then it may be worth putting a disclaimer in your video.

@krtelectricalservices

3 ай бұрын

​@HalfTheWorldAway-mf5cfEnsuring electrical installation work is safe doesn't matter! WoW....Let's hope you don't burn alive in a house fire caused by untested electrical works.

@krtelectricalservices

3 ай бұрын

@HalfTheWorldAway-mf5cf No....I'm a thick as shit. After all, I work in a trade where we just connect three wires👍🏻

@michaelanzak9171

10 сағат бұрын

Excellent points. Well said. 👍

It is just me or is the right hand side light slightly higher than the left? Could be an optical illusion 😁

@JP_TaVeryMuch

3 ай бұрын

Count the courses. Tis somehow an optical illusion as you aver!

Nice advert

I see a lot of very expensive tools there. Xmas has come early for someone.

@TheDIYGuy1

3 ай бұрын

😂 years and years of buying tools. I think I may have a problem lol

Not everyone can do it this easy. My house has single live and neutrals run around no twin and earth to simply cut into

@TheDIYGuy1

3 ай бұрын

Fair point. There are occasions where this will be the case

@1Goldigger1

3 ай бұрын

@@TheDIYGuy1 it's a pita tbh, I should really rewire the house

Does this not class as a new circuit and should it have to be signed off by either a qualified electrician or your local authority??

@Sparkyjedi

3 ай бұрын

Minor works certificate extended a existing circuit , he must of done that in other video 😂

Well I guess that's a promotional/product video because you can also just use a simple juction box.

@TheDIYGuy1

2 ай бұрын

This is the method I prefer.

I know rules are different US versus UK but I’m concerned about running just the cable through the brick. Over time vibration could wear through the insulation.

Good stuff but should say if you're sponsored.

@TheDIYGuy1

2 ай бұрын

A sponsored banner is included in this video. Thanks

They're only LEDs, nothing to stop you putting one of those connectors where the wall penetration is and splitting to the outside on a single string rather than a loop and then continuing to the next - granted, you'd need an extra connector, but it's arguably a simpler and tidier circuit. Also would mean you can disconnect it if you have a problem with one of the lights to swap it or whatever without turning the entire circuit off. This works too, but it's an option.. If you were doing like 4 of them it might make more sense than 4 cable runs.

Get rid of those rubbish connecter blocks and use Wagos

@TheDIYGuy1

3 ай бұрын

👍

@quickwire80

3 ай бұрын

If you've got time on your hands and don't want an easy life then by all means use Wago ;)

@quickwire80

3 ай бұрын

FYI, I'm not knocking Wago. They are great for all types of things, but this job here is perfect for Quickwire kit!

@dommer256

3 ай бұрын

@@quickwire80 I meant the ones in the lights. Your product is superb.

Why not wago?

@TheDIYGuy1

3 ай бұрын

For this particular application I prefer the splitter. Just personal preference really.

@justintemp

3 ай бұрын

@@TheDIYGuy1 thanks for quick reply It wasn't a critique, just wondering. Think splitter might be easier as you say. Do they need to be in an enclosure?

@TheDIYGuy1

3 ай бұрын

That’s what’s great about them, no enclosure needed. In fact, they are maintenance free too so can even be hidden if need be.

Shes at it again mate , I should have married him. (Meaning you).. I soon shut her up. I said no I should have married him. 😅

@TheDIYGuy1

3 ай бұрын

😂😂😂 brilliant comment. Thanks

This is why we never see the Milky Way in this country anymore.

@TheDIYGuy1

3 ай бұрын

I’ve a 4 pack in the cupboard 😊

@Vwfan

3 ай бұрын

🤣👍🏼

@pigeonlove

3 ай бұрын

Birds like robins that don't move very far actually live shorter lives due to lack of sleep and not being able to hide their nests from cats etc

@real-eyes-realise-real-lies

3 ай бұрын

Nah, thats all the chemtrails that are blocking out a clear night sky these days. Even if you go into the countryside where there is no light pollution.

@rodwilkins1614

2 ай бұрын

Why,don’t you stay up after midnight?

I'll assume you left the testing and minor work certificate requirement out for a specific reason?

NEED GUN HOLES IN THE WALLS NOT LIGHTS

Unless you are qualified, you aren't permitted to work on exterior lights or sockets, same as kitchens and bathrooms

@laughinglikefuck297

3 ай бұрын

Cool story bro 👍

@davidfarrant4023

3 ай бұрын

@@laughinglikefuck297 not a story, regulations.

Stop showing this crap in Australia as all electrical installations must by law be carried out by a LICENCED ELECTRICIAN.

@RandomShart

3 ай бұрын

These videos are how the modern day licensed electrician learns how to do the job 😂

@Sparkyjedi

3 ай бұрын

I only wish this country followed suit ❤

This is an advert.

Without being fully qualified, jeez. Im going to play with my brake pads instead

Was the brickie who did that garage an 8 year old?😂 Questionable advert for a DIY channel😂

Anyone who needs to have these things to do electrical work, shouldn’t be doing electrical work !!!