Straight to the point. I thought that impossible these days. Great video. Thanks.

In 15 years of a pinlock in various visors I’ve never taken it out to clean it , just clean it while in helmet as I’ve got a SCHUBERTH c3 , never had a problem seeing 😊👍👍

this video helped how to remove pinlock by just pulling it.. i saves me time from now on. thanks a lot im just a beginner about helmets 😅

@jandsaccessories30

5 жыл бұрын

We're glad we could help!

That was the smoothest installation ever. I always struggle with mine

Thanks from Seattle Washington!

You kind of blew right through getting the insert separated from the visor, which is why I tuned in, but thanks for the video.

I just purchased new haha but will give clean a go being cheap this time round

Is it ok to clean the side facing the visor? Mine got some dirt when I wiped my visor before I attached my antifog

thank you man,it helps

Why take it out at all if you are not clearing the side that touches the visor?

@DzanekCZ

2 жыл бұрын

exactly I am so confused 😃 😃

@mimimmimmimim

Жыл бұрын

Probably in order to leave that priceless fingerprint on the side facing the visor...

@issameQ

11 ай бұрын

That’s exactly what I was thinking!

@Luggruff

9 ай бұрын

Mine for example becomes shit after a while by itself. Taking it out and cleaning it helps

@oulupulu

9 ай бұрын

@@Luggruff you get shit between the visor and the pinlock? Dang.

Thank you ..

This applicable in every pinlock lenses?

How do I remove my visor? Mine won't go off easily.

You only have to look at a pinlock insert and it scratches, they reduce visibility when riding at night so they’ve got some major flaws. In cold weather yes they’re worth it, but in average dry weather just crack your visor and enjoy better visibility.

@kristaps2010

2 жыл бұрын

very very sensitive to scratches. agree

@Galf506

Жыл бұрын

I drive at night and a pinlock didn't really hurt me, just adds some reflection. But the lack of condensation is a huge benefit, especially at night

If the pinlock insert surface that contacts the visor doesn't need cleaning, as per narrator, just leave it in place and clean with water, surely?

Essentially, that was very helpful 😋👌

What name that put your visor or lens? The black one

I found that after a few years of use, my pinlock had a very thin layer of fine dirt on the inside facing which I had to clean.

I wash the whole pin lock in luke warm water then air dry before wiping the insde, it seems to keep the selicon seal flxable, thr way that was shown there,s noneed to remove the pin lock at all

what i find is after you remove your pinlock .. you have to put it on and take it off again many times as you noticed you got bits or finger prints trapped ..its a nightmare to get it perfect

@thisbliss81

2 жыл бұрын

Latex gloves when changing I was advised. Haven't tried yet

I took it off, now i cant seem to get the air bubbles out

I left my visor on the doughnut now it's a sticky mess of sugar and chocolate...........thumbs down for poor advice

Why mine still gets foggy

My pin lock came loose after a cleaning and fell out of my Ls2 valiant any suggestions?

@jandsaccessories30

8 ай бұрын

Tighten the pins (if you rotate them slightly) it tightens up the fit on the Pin-lock to the visor.

Is it possible to restore the pinlock after being scratched like doing on the visor by water sanding & then buff & polish?

@closery

2 жыл бұрын

I'm wondering the same thing because I guess I ruined my pinlock :( Edit: bought original new one from China for 15$ -_- couldn't find anyway to fix scratch

@DustyVisorMotorcycles

2 жыл бұрын

@@closery Agreed, for $15 why bother trying to fix the old one......

if its so easy why that you take it out? can you not clean it when its on the vizier?

@jandsaccessories30

5 жыл бұрын

Its a lot easier off it

@juniormaziz2928

4 жыл бұрын

dont you think its better to clean it on both side?

@muhammadhazarul

4 жыл бұрын

Plus if you did not maintain it properly, It could ruin your visor.

What do you have hanging on your ears?

Spray name please

@jandsaccessories30

3 жыл бұрын

Water

@tourlover0792

3 жыл бұрын

@@jandsaccessories30 OK thanks

@Flu_Tang_Clan

3 жыл бұрын

Dihydrogen Monoxide. You can only find it on Amazon.

@arthanick1247

Жыл бұрын

@@jandsaccessories30 what brand of water? Teehee, good video Sir

Why would you ever have to clean it ? It’s sitting on the inside sealed against the visor dirt and water shouldn’t be able to get on the pin lock at all no?

@ropeythat2049

2 жыл бұрын

You did not listen to what he said then about only having to clean side facing your face?

@kristaps2010

2 жыл бұрын

i installed it with tiny gap and now even on inside I have microdust to get rid off... cleaning both sides

To lie is a bad thing

Don't you ever do that with Nolan's pinlocks. They have silicon seal. You would destroy that seal and make your pinlock useless

You can't be serious

Well this a pointless vlog ... you could have cleaned that without removing it from visor & you never cleaned inside of visor prior to refitting pinlock ...