Thank you for watching! If you would like a hammer, head over to timothydyck.com Build your website with Squarespace! Use this link. www.squarespace.com/timd
Жүктеу.....
Пікірлер: 74
@grantriehl2003 ай бұрын
No joke, this has gotta be my favorite of Tim’s videos!
@TimothyDyck
3 ай бұрын
Thank you so much! To kind
@adventuresofskadi7277
3 ай бұрын
I second that statement. Actually learned a ton on this and not just the hammers. The way you made that rack was pretty cool @TimothyDyck
@user-cw8rc1ex3t
3 ай бұрын
@@adventuresofskadi7277 к этой стойке можно слона привязывать😂
@kd5bybАй бұрын
Got my 2 pound cross pein hammer in today's mail. It is such a nice hammer; what a work of art! Then I saw the serial number: 01! WOW! And it's in the video. My son and I just watched the whole video and it was amazing to see the hammer I now own towards the end of the video. 😄
@donaldmatthies60263 ай бұрын
That entire series is awesome! Thank you for taking time to build, film, edit and post this video.
@TimothyDyck
3 ай бұрын
You’re very welcome! So glad you have enjoyed it!
@minnesotatomcat3 ай бұрын
Peter was a great addition to the team! He’s no robomartin but that beard totally makes up for it 🤣
@tjtler363 ай бұрын
So honored to be part of the unlisted video crew
@TimothyDyck
3 ай бұрын
Thank you for being here!
@LanceMcCarthy3 ай бұрын
Tim, this editing style was amazing
@naturebuoys3 ай бұрын
Great video! That ending was too cool
@The_Smith3 ай бұрын
I've been in Ethan's shop a couple times, never been fortunate enough though to have been there when he had the steam hammer going.
@esany2 ай бұрын
Really nice homemade quenching tank you’ve got there!
@MrErViLi3 ай бұрын
You could make small fixed blade knives like a neck knife out of those small off cuts from the hammers when you break off the end. Then you could sell them with your hatchets or hammers.
@Swishersweetcigarilo
3 ай бұрын
If the hammers harden to 53 Rockwell maybe the thin knives would be higher
@kd5byb3 ай бұрын
Wow! What a nice looking hammer.
@bfg16373 ай бұрын
mmmmmm tooools. Beautiful work.
@Vikingwerk3 ай бұрын
Good looking hammers!
@StrayWolfForge3 ай бұрын
Thanks for another great video as a fellow smith i love watching the progression and steps. Awesome hammers with a cool past life.
@Joe___R3 ай бұрын
On your axes, I would still fully harden the whole head. But then I would go back with a torch and blue temper the eye with a torch to guarantee they are not too hard. Then, the poll is still hardened if you use steel wedges.
@tracybowling11562 ай бұрын
Excellent hammers! You are a great craftsman!
@virtusleather3 ай бұрын
Those are so sick Timmer! amazing collab. Also I thought my Watson red gloves looked bad.....geesh bud lemme send ya a couple pairs 😬
@paulmccullough73522 ай бұрын
Hey Tim, you might want to look into the "Astra coated" Compression pattern router bits from "Bits n Bits". Though the upfront cost is higher, you should find that they cut cleaner and faster and stay sharper for longer, so in production run like you have for the handles, it should work out worth the upfront cost in order to save on the back end.
@keiler01553 ай бұрын
these look simply goregeous!!!
@TDarv3 ай бұрын
very excited to get one! awesome work
@Zogg12813 ай бұрын
Awesome to see the full process and I love that rack you built at the end 😊👍👍👍👍👍👍
@JustAnotherCraftsman3 ай бұрын
Amazing job as always Timothy!
@Gefionius3 ай бұрын
Beautiful, Tim
@superfastwhatuppp63 ай бұрын
INCREDIBLE video. I could watch you in the shop making and creating all day. keep the forge lit my boy 🔥
@marcusFZ63 ай бұрын
Love you work Tim.
@boddysurfer3 ай бұрын
That lineup of hammers looks amazing! What a huge pile of swarf under your grinder, I hope you're saving it. Would really like to see you do a powdered metal canister billet with that.
@Ramen4Days3 ай бұрын
I’ve loved watching your progression as an artisan and videographer. Kudos on the new line
@JoeSmith-wd8ks3 ай бұрын
Hey Tim excellent workmanship ! Your attention to detail and presentation is amazing . I believe with practice one day i will be able to make a hammer similar but never with such great finish . Im just a farmer from new Zealand, but want to learn blacksmithing as a productive hobby. Ive been fortunate enough to get a good amount of blacksmith tools and two pneumatic Massey hammers , a 400lb and a 10 cwt one that has sat outside for 25 years and needs unseizing . You and Ethan are great guys im glad you to can compliment each other . I also need to say you go to extra effort to make high quality videos that share how you make the amazing items you sell , thanks for sharing it with us . Hopefully one day i can visit you in Canada and if you're ever down under in new Zealand you're welcome to visit , (once my new shop is built) From one Tim to another thank you 😊
@paulmccullough7352
2 ай бұрын
Kia ora from Oz. I do miss pulling teats, but i cant say i miss the early mornings. But then again, maybe i do?
@edgararvizu9292Ай бұрын
Making some hammers for construction would be cool , a challenge tho ,
@jimmyrk33 ай бұрын
Your "flatting the budge" is easier than mine. I had to lose 35 pounds to get it done...
@TimothyDyck
3 ай бұрын
That’s so funny! Good for you, I gotta get my butt in gear and start exercising too.
@thebookof96pages3 ай бұрын
Beautiful sentiment at the end ☺️
@meyersr783 ай бұрын
#20. Nice work Tim! Beauties!
@ThemusMaximus3 ай бұрын
Another really enjoyable video. Well edited and produced. Makes it very easy to consume. Nice hammers too:)
@somekindofography3 ай бұрын
Im not sure if this would be a feasible service offering. But have you ever thought about doing a hammer/axe rejuvenation service? Like a re-handle and a striking face/ blade clean up. Seems like there would be people with their beloved inherited old iron that wouldn't mind a professional do a refresh. Anyways, love your work and love your videos!
@dmckenzie92813 ай бұрын
Those are a work of art! I wish that I could buy one but my budget says no.
@Jellooman3 ай бұрын
Amazing!
@IanZainea19903 ай бұрын
11:45 its like a cake or bread, the crust is the hardest
@stevendelvecchio37213 ай бұрын
This was truly a great video. Thank you!! Just out of curiosity, about how much extra steel do you start with to end up with your desired weights? Is there anything that you can do with the cutoffs from forming the pein?
@cae24873 ай бұрын
I personally find straight pein hammers are 100 times more useful than cross pein hammers. They make my life way easier so I'm glad to see you making some Tim.
@hulkthedane75423 ай бұрын
If you fully quench the hammers, tha thinner parts cool faster - that could be why they are harder than the rest.
@dragonwaterforge3 ай бұрын
Hey Tim how bout a double diagonal hammer lol
@kadenmclain98913 ай бұрын
Whatcha doing with the reject hammer heads?
@TimothyDyck
3 ай бұрын
I recycle them/use the steel for other projects.
@kadenmclain9891
3 ай бұрын
Cool
@ennpeeceee3 ай бұрын
R.E the different Rockwell readings : you need to anneal these properly after working them as there will be tension and work hardening occuring and would also be hardening from the trains also ?? !!
@brianroy49993 ай бұрын
What kind of oil is applied to the handle?
@TimothyDyck
3 ай бұрын
A concoction of Odies oils. I didn’t talk about it in this video as I have in in the past. Odies is super good stuff.
@nightmarejr3 ай бұрын
why is the drift white? just white paint? titanium dioxide?
@markphillips81213 ай бұрын
How can I buy your products. I would love a hatchet!
@nishantshivhare6003 ай бұрын
Can someone tell me where did he buy the rail tracks from ?
@vyr013 ай бұрын
why not use the same wood for the wedges as the handles? other than aesthetics?
@nofunclub3 ай бұрын
Teemmeeèh!
@ClenioBuilder3 ай бұрын
👏👏👏👏🤜🤛
@SolarTaraАй бұрын
The www. in your website link causes it to be broken on this video. Cheers
@TimothyDyck
Ай бұрын
Thank you! I just moved to a new website and I think it works now! Try timothydyck.com
@StodOneR3 ай бұрын
Isnt rail mild steel?
@Jacob_Dwyer
3 ай бұрын
It was, until you have trains running on it until it is decomissioned and then it is the hardest of cold forged. Notice they aren't sawing the billets, you run through tooling if you try to saw it.
@monvier23 ай бұрын
noobs when youtubers think they are blacksmith
@paulmccullough7352
2 ай бұрын
what is that supposed to mean?
@monvier2
2 ай бұрын
@@paulmccullough7352 that there is a lot of unskilled persons thinking they are doing a good job sharing bad practices to unaware viewers creating more unskilled persons thinkig they are doing the thing perfectly but .....
Пікірлер: 74
No joke, this has gotta be my favorite of Tim’s videos!
@TimothyDyck
3 ай бұрын
Thank you so much! To kind
@adventuresofskadi7277
3 ай бұрын
I second that statement. Actually learned a ton on this and not just the hammers. The way you made that rack was pretty cool @TimothyDyck
@user-cw8rc1ex3t
3 ай бұрын
@@adventuresofskadi7277 к этой стойке можно слона привязывать😂
Got my 2 pound cross pein hammer in today's mail. It is such a nice hammer; what a work of art! Then I saw the serial number: 01! WOW! And it's in the video. My son and I just watched the whole video and it was amazing to see the hammer I now own towards the end of the video. 😄
That entire series is awesome! Thank you for taking time to build, film, edit and post this video.
@TimothyDyck
3 ай бұрын
You’re very welcome! So glad you have enjoyed it!
Peter was a great addition to the team! He’s no robomartin but that beard totally makes up for it 🤣
So honored to be part of the unlisted video crew
@TimothyDyck
3 ай бұрын
Thank you for being here!
Tim, this editing style was amazing
Great video! That ending was too cool
I've been in Ethan's shop a couple times, never been fortunate enough though to have been there when he had the steam hammer going.
Really nice homemade quenching tank you’ve got there!
You could make small fixed blade knives like a neck knife out of those small off cuts from the hammers when you break off the end. Then you could sell them with your hatchets or hammers.
@Swishersweetcigarilo
3 ай бұрын
If the hammers harden to 53 Rockwell maybe the thin knives would be higher
Wow! What a nice looking hammer.
mmmmmm tooools. Beautiful work.
Good looking hammers!
Thanks for another great video as a fellow smith i love watching the progression and steps. Awesome hammers with a cool past life.
On your axes, I would still fully harden the whole head. But then I would go back with a torch and blue temper the eye with a torch to guarantee they are not too hard. Then, the poll is still hardened if you use steel wedges.
Excellent hammers! You are a great craftsman!
Those are so sick Timmer! amazing collab. Also I thought my Watson red gloves looked bad.....geesh bud lemme send ya a couple pairs 😬
Hey Tim, you might want to look into the "Astra coated" Compression pattern router bits from "Bits n Bits". Though the upfront cost is higher, you should find that they cut cleaner and faster and stay sharper for longer, so in production run like you have for the handles, it should work out worth the upfront cost in order to save on the back end.
these look simply goregeous!!!
very excited to get one! awesome work
Awesome to see the full process and I love that rack you built at the end 😊👍👍👍👍👍👍
Amazing job as always Timothy!
Beautiful, Tim
INCREDIBLE video. I could watch you in the shop making and creating all day. keep the forge lit my boy 🔥
Love you work Tim.
That lineup of hammers looks amazing! What a huge pile of swarf under your grinder, I hope you're saving it. Would really like to see you do a powdered metal canister billet with that.
I’ve loved watching your progression as an artisan and videographer. Kudos on the new line
Hey Tim excellent workmanship ! Your attention to detail and presentation is amazing . I believe with practice one day i will be able to make a hammer similar but never with such great finish . Im just a farmer from new Zealand, but want to learn blacksmithing as a productive hobby. Ive been fortunate enough to get a good amount of blacksmith tools and two pneumatic Massey hammers , a 400lb and a 10 cwt one that has sat outside for 25 years and needs unseizing . You and Ethan are great guys im glad you to can compliment each other . I also need to say you go to extra effort to make high quality videos that share how you make the amazing items you sell , thanks for sharing it with us . Hopefully one day i can visit you in Canada and if you're ever down under in new Zealand you're welcome to visit , (once my new shop is built) From one Tim to another thank you 😊
@paulmccullough7352
2 ай бұрын
Kia ora from Oz. I do miss pulling teats, but i cant say i miss the early mornings. But then again, maybe i do?
Making some hammers for construction would be cool , a challenge tho ,
Your "flatting the budge" is easier than mine. I had to lose 35 pounds to get it done...
@TimothyDyck
3 ай бұрын
That’s so funny! Good for you, I gotta get my butt in gear and start exercising too.
Beautiful sentiment at the end ☺️
#20. Nice work Tim! Beauties!
Another really enjoyable video. Well edited and produced. Makes it very easy to consume. Nice hammers too:)
Im not sure if this would be a feasible service offering. But have you ever thought about doing a hammer/axe rejuvenation service? Like a re-handle and a striking face/ blade clean up. Seems like there would be people with their beloved inherited old iron that wouldn't mind a professional do a refresh. Anyways, love your work and love your videos!
Those are a work of art! I wish that I could buy one but my budget says no.
Amazing!
11:45 its like a cake or bread, the crust is the hardest
This was truly a great video. Thank you!! Just out of curiosity, about how much extra steel do you start with to end up with your desired weights? Is there anything that you can do with the cutoffs from forming the pein?
I personally find straight pein hammers are 100 times more useful than cross pein hammers. They make my life way easier so I'm glad to see you making some Tim.
If you fully quench the hammers, tha thinner parts cool faster - that could be why they are harder than the rest.
Hey Tim how bout a double diagonal hammer lol
Whatcha doing with the reject hammer heads?
@TimothyDyck
3 ай бұрын
I recycle them/use the steel for other projects.
@kadenmclain9891
3 ай бұрын
Cool
R.E the different Rockwell readings : you need to anneal these properly after working them as there will be tension and work hardening occuring and would also be hardening from the trains also ?? !!
What kind of oil is applied to the handle?
@TimothyDyck
3 ай бұрын
A concoction of Odies oils. I didn’t talk about it in this video as I have in in the past. Odies is super good stuff.
why is the drift white? just white paint? titanium dioxide?
How can I buy your products. I would love a hatchet!
Can someone tell me where did he buy the rail tracks from ?
why not use the same wood for the wedges as the handles? other than aesthetics?
Teemmeeèh!
👏👏👏👏🤜🤛
The www. in your website link causes it to be broken on this video. Cheers
@TimothyDyck
Ай бұрын
Thank you! I just moved to a new website and I think it works now! Try timothydyck.com
Isnt rail mild steel?
@Jacob_Dwyer
3 ай бұрын
It was, until you have trains running on it until it is decomissioned and then it is the hardest of cold forged. Notice they aren't sawing the billets, you run through tooling if you try to saw it.
noobs when youtubers think they are blacksmith
@paulmccullough7352
2 ай бұрын
what is that supposed to mean?
@monvier2
2 ай бұрын
@@paulmccullough7352 that there is a lot of unskilled persons thinking they are doing a good job sharing bad practices to unaware viewers creating more unskilled persons thinkig they are doing the thing perfectly but .....
LOOKING good TiM . 👍🥸🤠