Thank you. Best no base remove wheel swap I’ve seen yet

it's easier to change the wheels on a real car

@NicolasT94

7 жыл бұрын

lol true

@TrainsOfAustralia

7 жыл бұрын

RG4L- GOLDENPANDA yep totally agree

@Bobby_Behm

5 жыл бұрын

Well obviously😂

@DominicSantini

4 жыл бұрын

so true

@AzPlayz1052

4 жыл бұрын

Its easier but more expensive xD

Oh man, why couldn't those cars just be fastened by screws instead of rivets? That way I wouldn't need power tools to deal with them

@jamesdavis4717

5 жыл бұрын

It would raise the cost of production and increase the cost of the car.

you could at least put the tips of the of the axel you cut on the other side so it looks better or "untouched". I'd rather drill the rivets of any car than put super glue on a RedLine or RealRiders wheel tho.....

You could also save that end that was snipped off and then super glue it on the outside of the wheel if you are going to leave the car out of the blister. Very nice idea in this video. I will definately try it.

Dude has a Satin Blue Veyron that thing has shot up in value, nice to see.

@BrickGinjah

Жыл бұрын

Thanks for watching! I probably did something horrible to it...

Best wheels swapping ever seen

Sweet idea bud, nicely done. I can't wait to give her a try. Thanks look forward to some more of your vids.

I've been avoiding alot of cars cuz they come with boring plastic wheels but now I can change that

@BrickGinjah

8 жыл бұрын

+Grizzly ER Glad to help!

@donrowe7194

7 жыл бұрын

Grizzly ER do not follow this guys example if you want to do a custom the right way. take the time, drill the rivits out

@BigAsDiecast

5 жыл бұрын

@@donrowe7194 I disagree, the idea is to keep the car looking as original as possible. Its like owning a classic car. The more you customize it, the more it loses its value becuase it no longer has all of its original components.

@donrowe7194

5 жыл бұрын

@@BigAsDiecast really? the second you cut ,paint ,or remove ANYTHING it loses its value....you seriously don't know that? the second dude cut the original wheels off it became worthless to a true hot wheels collector.

@BigAsDiecast

5 жыл бұрын

@@donrowe7194 Not necessarily because there are different types of collectors out there. There is a market for everything my friend.

So what happens when the super glue actually dries. Do the wheels still spin. Because my guess is they don't

@ivonnewarow4796

4 жыл бұрын

They can because the wheels spin on the axle

@megaman2099

2 жыл бұрын

@@ivonnewarow4796 but the glue paste the wheel to the axl, how can still rolling fine? I have been doing this trick and sometimes the wheel doesn't spin

This is the only video in the world that actually is what we wanted. Thank you so much.

Nice job on that car! Good choice of wheels and snipping the drivers side axle ends was also a great decision because when looking through the blister, you still see the factory axle ends.

seems that there is no way to wheel swap without violating the car. :(

@jackdub75

7 жыл бұрын

I cut the wheels off and it does no harm to the car. Only the donor is harmed in the process.

@idaayuswasthi3875

7 жыл бұрын

He means without the grinder

Pretty cool although super glue can get pretty messy. Excellent vid though...love your tips bud.

Excellent. Time to go through my nightmare collection! Thanks

Nice job! I think I would glue that axle head back on the tire as well so both sides of the car match.

Hello Scott, What size cutting wheel do you use to do this? I shaved off my cutting wheel to about the size of a dime, and it still did some damage to the base.

Does the super glue slow the car or get stuck to the car?

@quercus5398

2 жыл бұрын

I think it’s mainly for esthetics........it’s a tempered car held by a tiny drop of glue,not as solid as original. But for a change,good job!

Excellent work, I'll be doing all my cars like that in the future many thanks.

How do you swap out a hot wheels 55 chevy belair with the fender in the way?

I would like to change the axles and wheels on my steering rigs. Is there any additional advice?

I think I would take the tiny piece you snipped and glue it back in the hub so that the wheels on both sides of the care match.

@BrickGinjah

8 жыл бұрын

+bootube75 I do this often. Thanks for watching!

@BigAsDiecast

5 жыл бұрын

Good point, I would definitely glue the tip of the axle onto the hub very carefully, to make the car look as original as possible!

Omg thanks bro every thing need drills but you are the best thank you so much

that's a good idea to swap wheels. thanks bro.

how do I fix wheels that aren't loose like they should be, (On my Aero pod the back wheels arent loose they are tight for some reason.)

does this work if you want to put racing wheels?

Do all of these customzation need power tools?

Love it less of a hassle then taking the pivots out.

Good video but got one question,how did you get the other set of the wheels off?from the cougar eliminator without a drill?

Nice! What size is the mini saw?

Surely it's really easy for the wheels to fall of

Question I’m new to this and really want to try this. Once the glue dries up will the wheels still spin or not? Please help. Thank you.

Thx, this helped out a lot.

Is there a replacement to the dremel ?

does the wheel spin if you do that?

Where did you buy your Dremel saw?

Wow that's pretty violent!

@beeter3588

8 жыл бұрын

Pixar cars sugary in a nutshell

Scott thank you for an other variation on customizing cars.

Very cool way to do that!

but will the tire still move

Awsome video thanks so much

Great video! but just one question.. The rivets of the hot wheels cars are circular. How do I drill them off?

@Palaganas818

8 жыл бұрын

you can get a dril like those stick ones and drill at the middle of the rivef.

@DrifterD

8 жыл бұрын

DatBoyJayy Hmm okay. Thanks haha

@Palaganas818

8 жыл бұрын

rivet*

I'd rather just still drill it, this way doesn't look very assuring.

It's nice tuto i suscribe👌 Thank's✌️

Awesome idea! Just some people like to keep the wheels.

this is very helpful

Thank you man!

How do they race? Do they perform on the track with a glued wheel??

@BrickGinjah

Жыл бұрын

they roll poorly. My customs are mostly for show, not for go.

this idea actually works very well. is many years ago I had an old Hot Wheels car that the wheels and axles are so bent is that the bottom of the car drag the ground and it never rolled straight... so I snipped the wheels off of it and then replaced them with the wheels from a previously damaged car... the end result? a restored car that rolled like a brand new Hot Wheels car... my only question is... what is the purpose of putting the car back on the blister card?

@BrickGinjah

8 жыл бұрын

+TheMexicanPig If you're careful, the car still rolls. It won't win any races, but it will roll.

I don't have any car axels for my Morris mini help

Great job! It's quick, its easy, and more importanly. The Hot Wheel remains in most of its original form, which is what I care about the most. Its like buying a classic car, and removing its original parts or components. In terms of a value, the car is no longer in its original form, therefore, the car becomes less desireable to a collector. I believe the above to be true with Hot Wheels. The more you customize a Hot Wheel, the less desirable it is, and/or become in the eyes of a Hot Wheels collector. I have a question. Other than the Dremel itself. What other tools and drill bit pieces do you use to remove the axles from the Hot Wheels?

I've never tried this, so I have a quick question. Does the super glue ever keep the tires from spinning? Great video!

@BrickGinjah

Жыл бұрын

yeah, it makes them stop spinning. I mostly put my customs back on the cards, so the stuck wheels don't bug me.

You sell them?

You should take the ends of the axle you cut off and glue them on the other side of the wheels to make it look factory.

That was cool

Thanks for this vídeo. I bought the drill bit yesterday and my black and decker won't drill out any car i have. What's the exact name of the saw you use?

@BrickGinjah

7 жыл бұрын

knightrcer I use a craftsman 19.2 volt drill. A small dremel or black and decker power Driver won't work.

@knightrcer

7 жыл бұрын

F100d50 but your vídeo shows you using the dremel instead of a drill. Are you recomending the drill now?

@BrickGinjah

7 жыл бұрын

knightrcer sorry. I mixed up my videos. Yes. For the no-drill I use a dremel to cut the axel. I don't have the model, but is it ac power. Not battery.

@knightrcer

7 жыл бұрын

F100d50 Thanks

I will never do this but good work

nice and easy job man....heheheh thank you!!!

Incredible

Soooo let me understand this. You messed up a $TH for getting the rubber wheels from it and put them into a basic HW?

@BrickGinjah

8 жыл бұрын

Nope. Took the wheels off of a cougar from the garage series. That's it in the background. Got it on markdown.

@Flanker84

8 жыл бұрын

Oooh, good. At first it looked like a $TH. My bad.

thank you

Ok, you said "wheel replacement without taking the rivets off" then how did you get those other wheels off the other car without cutting the rod or taking the rivets off?

@BrickGinjah

8 жыл бұрын

+Kit Truong I did drill out the rivets on the "donor" car.

@MrKiet76

8 жыл бұрын

+F100d50 haha OK gotcha!

Also how long do you let it dry?

@Kevin-ev7hw

8 жыл бұрын

+CRB GAMING Depending on your Superglue viscosity and weather. Most Superglues will be dry in less than a minute.

1. What the name of all the tools I need ? 2. What drill size is needed? 3. The thing that holds the wheels together, what us that called? You should start selling all the things that are needed for the method as a starter pack and you could make some good money off it :-)

@BrickGinjah

8 жыл бұрын

Thanks for the suggestion! Check out my other videos. There is one with all the drillbit sizes.

@F40LM

8 жыл бұрын

F100d50 You should make play and put them all together or maybe make updated ones like part one and part two and put them in a playlist do it then becomes a complete guide if you haven't done so

I strongly believe that super glue sticks the body and dont turn

Where do you get the wheels

@BrickGinjah

2 жыл бұрын

From other cars.

What attachment is on your dremel I am in need of one

@davidpham9xbecoolinaporsch708

8 жыл бұрын

is basicly a small size cutting disk

@BrickGinjah

8 жыл бұрын

+Judd Flora Yes. a thin small cutting wheel.

Awesome

Great!

Erm... Is it coincidence I'm trying to do this on my '65 2 + 2 Mustang Fastback 😂

🔥🔥🔥

. Try a needle tip soldering iron and melt the plastic around the rivet and pull the car apart. use a small flathead screwdriver to clean the whole just enough for it to click back together after installing yer new wheels with uncut wheels and axles. now getting the real riders out of a donor is its own project in its self

do a lb ferrari or an aventador and the wide bodykits and lowering the car u rlly shld make that video

Does this devalue the car? Is this part of an investment also?

@mikehamman7307

5 жыл бұрын

The car is a basic mainline worth maybe $0.25. Can't devalue much... .

How will the car roll?

@willgulley4257

8 жыл бұрын

Once you put the glue on there let it dry and it will roll

@70sdude57

4 жыл бұрын

Now the model is considered a counterfeit.

Bout to fix my datona

youre on Instagram?

Nice technique ....but be care full for the first time....cause when you attach the wheel with the glue check that the wheel is not touched the base, some model have big base with wheel, which makes stuck the wheel with the base & wheel not spin.

i have a mustang like that but mine is gold

can you modify my hotweels ?

@juliushvorecky3036

7 жыл бұрын

the name of the van is *custom '77 Dodge Van*

gdshit💪👍✌

You wont be using those wheels again

I have that car

I only have formula f1 green

Pretty neat....it just bothers me that one side of the axle is missing a head. This is good for guys who wanna keep their customs in the card since only one half is showing. For die cast photography it's a different story. Unless you cut off all the heads LOL

meanwhile you cut the base...not a good trade off

Don't the wheels stick

why not at least sand down a cut end to a disk and kragle it. I like to display my cars with custom scenery, so its getting viewed on all sides, Not repacking them

dude those are red liner wheels

@levigonzales2060

7 жыл бұрын

Doge inc. those aren't legit red line tho

Malaysia 😂

@azaddanial1402

7 жыл бұрын

Dolan Gawd i am from Malaysia

@dolangawd4938

7 жыл бұрын

Azad Danial who cares me too

Do you know some people don't have a hot wheel

@jackdub75

7 жыл бұрын

Diana Kamau Then don't watch the video!

This is worse than drilling through

Nope! I'd rather drill out the rivets & do the job right.

lazy

very bad thing ......s hotwheel fan would never do it.....

@fuzion4104

5 жыл бұрын

chetna manhas lol idiot