This video is the most important video for Hot Toys collectors on damn KZread!

@metamorphiccustoms

Жыл бұрын

Thanks so much! Glad this is useful!

Your videos are a godsend, brother (like your dioramas😉)! I love how you are sharing your knowledge to others like me who are relatively new to the hobby! Much appreciated, Desi!🙏🏻

@metamorphiccustoms

2 жыл бұрын

Thank you so much !😀 Really glad you like the videos, more to come soon!

Thank you so much for showing the best way to maintain our figures. A lot of vloggers tell you what to use however you are the first, that I’ve seen, show how to do it.

@metamorphiccustoms

2 жыл бұрын

Thanks Dan! I agree, I’ve seen a lot mention all of the above and some even use them. I wanted to demo the 3 main ones together in a video while also pointing out the likely cause of the problem. (Not just “humidity” but rather drastic changes in humidity and temperature.) Appreciate the feed back!!!

👏👏👏😎 Desi this channel is next level brother! So much good information, tips, tutorials, everything. What a great contribution to the 1/6 scale community. 🔥🔥🔥🔥

@metamorphiccustoms

2 жыл бұрын

Thanks so much my Friend! Glad this has been informative!

Really helpful tutorial mate.

@metamorphiccustoms

2 жыл бұрын

Thanks Andre!!!

Thank you my friend for the help/ advice/ great video...

@metamorphiccustoms

2 жыл бұрын

Thank so much for watching and for the feedback!!!

Love all your videos and look forward to more!

@metamorphiccustoms

2 жыл бұрын

Thanks KC! More to come soon!

Very informant video mate ,i've used the 303 for a while now but will definitely be applying some the other finishes used 😎👍

@metamorphiccustoms

2 жыл бұрын

Awesome! Glad the video was informative. Thanks for watching Maniak!

This was a must watch for me 🔥.Had to favorite this video. Definitely want to prevent any damages to your collection. Gotta do these procedures to Dooku, Obiwan, Anakin, and JL Batman. Thanks Desy 🙏

@metamorphiccustoms

2 жыл бұрын

Very welcome! Thanks for watching Will! Glad this was informative.

Just wanted to say thank you, brother! There's some figures that I was scared to purchase due to their materials. This video is by far the best information for 1/6 scale figures.

@metamorphiccustoms

Ай бұрын

You're very welcome, and thank you for the kind words! Happy collecting!

Just found this channel, your vids are awesome man! Keep ‘em coming!

@metamorphiccustoms

2 жыл бұрын

Thanks for watching!!! More to come soon!

again, thanks for sharing your experiences with maintaining your figs! Much appreciated! I collect since 2015 and thank god, no issues whatsoever. Still i think i will take some precautions on my Nick Fury, Red Skull, or Yondu figs. Another thing i want to point out is, i like how you handle youself in your videos like a pro. The vids have real added value for the viewer, are structured, edited well, looking top notch with nice lighting and are highly entertaining ! With that said, i think your channel will explode soon, bro! So keep them vids coming! ^_^

@metamorphiccustoms

2 жыл бұрын

Thanks so much Buzz! That’s really high praise! I’m still learning the editing, lighting, and sound aspects, but it’s been a rewarding challenge. Also good to hear stories like yours of figures still being in good condition after several years!

Thanks for sharing this vid, very helpful👍

@metamorphiccustoms

10 ай бұрын

My pleasure! Thanks for watching.

Thanks Desi. I’ve asked others about doing a video like this and unfortunately they never did. This is super helpful, appreciate you taking the time to make the video.👍

@metamorphiccustoms

2 жыл бұрын

You’re very welcome Luis! Glad this helped!

@luismarin3551

2 жыл бұрын

@@metamorphiccustoms Question, what can we use for the seamless body types? I have my Hellboy and worry about 2 things, the rubber cracking at the joints and paint rubbing off.

@metamorphiccustoms

2 жыл бұрын

@@luismarin3551 Honestly, that is one component I have never treated. (Outside of the Keaton Rubber suit.) The "skin" silicone bodies (including my old HT Alien figures, Dutch, Billy, and even the new Episode 9 Rey) remain in like-new condition without treatment. Even when posed with their arms bent beyond 90 degrees. But I am aware of the issues other collectors are facing. I do not believe any of the products I mentioned in the video would be suitable for the silicone bodies. I have heard of applying thicker greases to the silicone to keep it hydrated, but I also believe the grease never dries. (Its good because it remains on the silicone, but also makes it a bit awkward if you ever need to pick up the figure since you'll get grease on your hands. (Still, it is an option some people choose. I just never tried it myself.)

@luismarin3551

2 жыл бұрын

@@metamorphiccustoms Thanks again for taking time to answer my question, appreciate it.👍

very helpful. Thank you for the advice.

@metamorphiccustoms

2 жыл бұрын

Glad it was helpful!

Good stuff!

@metamorphiccustoms

2 жыл бұрын

Thanks Sam!

As Benjamin Franklin once said “An ounce of prevention is worth a pound of cure.” I would rather treat my figures than look for replacement clothes. Thanks for the informative video.

@metamorphiccustoms

2 жыл бұрын

I agree! Thanks for watching.

You just gained a new subscriber. Thanks for the video.

@metamorphiccustoms

Жыл бұрын

Thanks so much! Really apprecate the feedback and sub!

Have been using angelus finisher for years on my sneakers to protect custom paint. Krylon spray finisher is also pretty useful if you can cover the other parts up

@metamorphiccustoms

2 жыл бұрын

Its a great product. I use Krylons clear sprays on my dioramas all the time. They work really well. Thanks for watching!

This is great advice and an excellent video! Thought I had been subscribed but fixed that. Even in my climate controlled display room Deadpool still melted and I use these products myself and recommend them. Have never used Mod Podge before but I will add that to my toolbox as well.

@metamorphiccustoms

2 жыл бұрын

Thanks Doc! Oh man that’s terrible! Really sad to hear about the Dead Pool figure. Mod Podge is more of an adhesive to repair or stop early cracking. It could be used a protective coating, though. I agree, I still recommend just 303 for regular maintenance.

Hey thanks for putting this up. The more people I see talking about a product the more comfortable I am using it. I've heard of 303 before...I think I'm gonna pick some up. Climate control isn't a thing in my little barntop apartment...and the temperature/humidity shifts in Oklahoma are EXTREME. I just in the last couple of months got my first four figures and I'll definitely be using this stuff.

@metamorphiccustoms

Жыл бұрын

Thanks for watching and glad this helped! Given the environmental shifts in your area, maybe getting a small dehumidifier for those high-humidity days will help.

Great video on the tricks of the trade next level and keep up the great content-Flex Friday 🔥

@metamorphiccustoms

2 жыл бұрын

Thanks so much Jason! Really appreciate the feedback my friend!

OMG, THANK YOU SO MUCH! I have pleather clothing that is deteriorating on some of my BE Goth dolls!

@metamorphiccustoms

Ай бұрын

You're very welcome and Thanks for watching! Hopefully, this helps.

Great tips. I started adding Angelus Too Soft to their clear coat product, Angelus Acrylic Finisher, to increase flexibility of the coating. It doesn’t affect the finish and I can bend, flex the items more extensively without fear of the clear coat cracking. You do have to apply heat as part of the process. I use a hair blow drier that lets me do smaller pieces held with tweezers when needed and doesn’t get hot enough to melt anything. At least I haven’t had anything melt-if you held the item close enough, long enough to the drier I suppose you could have an issue. The Angelus Acrylic Finisher with Too Soft added 1:1 are applied to all accessories made of pleather.

@metamorphiccustoms

2 жыл бұрын

Thats is some awesome insight! Thanks for sharing David. I'm going to try that out.

@therealgeorgiadacosta9320

2 жыл бұрын

Oh wow thanks for this tip! You said, you add it to the Angelus Clear Coat. Can I add it to the Acrylic Finisher? Mine is a Spiderman Upgraded Suit FFH. I like your tip as it helps keeping the Angelus coating while posing my Peter around

@texasdavid9764

2 жыл бұрын

@@therealgeorgiadacosta9320 The acrylic finisher is the “clear coat” I used. Should have used actual product name but thought most would be more familiar with a term like clear coat. It has worked like a charm. I did the Soo Soo Gambit figure’s coat everyone is worried about cracking and peeling. I kept going since his coat was off and put a layer over his neoprene-like suit. Can’t tell it’s there. Time will tell if it prevents deterioration.

@therealgeorgiadacosta9320

2 жыл бұрын

@@texasdavid9764 Thank you for the explanation

Great video! What do you suggest for vaders suit and belt etc? The 1/6 as well as the 1/4 scale?

Keep posting tips like that and this channel will grow like crazy

@metamorphiccustoms

2 жыл бұрын

Will do! Thanks for the feedback Steve!

Great tutorial. I had no idea I needed to do this until about a year ago when I started seeing Hot Toys figures with cracked, flaking accessories posted in various places. I've been extremely lucky with my figures, but I'm going to perform the 303 maintenance ASAP! I purchased a sealed Star Lord recently. I know that the Hot Toys pleather coats are notorious for breaking down badly. I'm almost afraid to open it up. 😬

@metamorphiccustoms

4 ай бұрын

Hey Thanks for watching and for your comment! Good luck and hopefully you don't see any issues. Starting with the 303 should help! And yes, unboxing an older figure is always nerve-wrecking. Even if the original owner had it displayed in a climate controlled area and took great care, who knows how long it was boxed up before getting to you and what the environment conditions were during shipping. (The older the Pleather, the more sucseptible it is to drastic climate changes.) Still, if the pleater on your particular figure was sealed, this should provide significant protection.

Thanks for the content, glad I found this. I have Blade 2 which is the first fig I bought 12 years ago. I noticed in the last couple of days a bit of lines (not sure if it’s cracking) on the pants, not sure if they’re pleather or rubber, how would you approach? Modge podge and 303?

@metamorphiccustoms

Жыл бұрын

Yes, that’s exactly what I would do. You can dilute the Mod Podge with a bit of water, or use it straight out of the bottle. Then once it’s completely dry (give it a day or so), hit it with 303. Thanks for watching!

Awesome tips! I used leather lube and apply it every 6-8 months. I want to try the acrylic finish but was wondering if it would crack when u articulate it? Thanks

@metamorphiccustoms

2 жыл бұрын

The leather lube sounds like a good idea! The Angelus finisher is specifically for leather/pleather so it hold up well when you manipulate the pleather. No cracking at all. Thanks for watching!

This is probably the most helpful collection maitenance video I've ever seen. I very rarely do the whole "up vote"/favourite thing, but this video gets both. I don't recall you saying, did you mention how often you have to do a coating of protectorants for figures? Is it like once a year? Once a month? Thank you!

@metamorphiccustoms

17 күн бұрын

Thanks so much for the very kind words and for the up vote! Frequency of application depends on your environment. If it’s really humid and your HVAC (or lack there of) aren’t the best, then I’d say reapply every month. On the other hand, if the humid is constant, either because of the local environment or because of a great HVAC system, then only reapply every 6 - 9 months. I reapply every 3-6 months.

@NightshadeSM05

17 күн бұрын

@@metamorphiccustoms Thank you so much!

I’ve been collecting for over decade now and I’m glad I haven’t had this problem yet. I have a lot of the “problem” figures with no issue. I wonder what makes my collection area different than most.

@metamorphiccustoms

11 ай бұрын

That's awesome! A dryer climate thats not prone to shifts in humidity/ temperature is critical. If you live in such a climate, or if your colleciton is in a room with an extrmely efficient HVAC system, and there are no constant power outages in your area, then you're set!

Really good video! Thank you for posting! I have a question: do these figures deteriorate if you have one mint sealed? For example if you have say a batman in storage still in its brown box shipper. Should I open it after all these years and apply a coat of 303 or trust the mint seal will be preserve enough? Thanks.

@metamorphiccustoms

Жыл бұрын

Thanks for watching! So unfortunately, the answer to your question is “yes”, the pleather components can absolutely deteriorate even when sealed in their original packaging. The most important factor is still the environment it’s stored in. That’s why when it comes to HT’s, many buyers refuse to buy still-sealed figures that have pleather components. (They insist the seller first open the figure to fully inspect the pleather to ensure it’s actually “mint”.) There are plenty of cases where buyers have reported opening older figures that were still factory sealed only to find badly flaking pleather. The decision to open sealed HT’s is really up to you. I would open mine to apply the 303, but that’s also because I display mine. (Factory-sealed HT’s have not historically increased in value much more than ones that have been taken out of the package and are still in “like-new” condition. HT’s are truly a special segment in toy collecting.)

Superb & Informative content. Since I could not see products clearly, could you pls tell me which 303 and other stufffs you use for maintenance. Many thx

@metamorphiccustoms

4 ай бұрын

Thanks for watching! The links for all products are in the video description. Let me know if they dont work for you.

I bought 3 Death troopers straight from Sideshow and the holsters were already decaying the moment I opened the box. Bought another 3 off some guy on FB and those ones are still fine lol. Now the pauldrons are starting to fade and flake good thing I found this video when I did lol

@metamorphiccustoms

2 жыл бұрын

Yup! I got my R1 Death Trooper Specialist form Sideshow duing one of their "Graveyard finds". (I think thats what they're called). So they had 1 in stock . When I got it, the pauldron pleather had a minor crack in it. I treated it with Mod Podge to stop the cracking. So far...so good.

@YTIsRanByFeds

2 жыл бұрын

@@metamorphiccustoms The pauldrons are flaking where the blaster stocks rub up on so for a “natural” looking weather it’s fine, kinda. I just wish they would stop using it

BRAH... Need this video to work on my Winter Soldier flaking pleather issue... Might be able to save it. Thanks

@metamorphiccustoms

2 жыл бұрын

Thanks man! Yeah if it started to crack but hasnt really started to flake heavily yet, hit with a thin coat of Mod Podge.

Question when you put that on the boots are the boots still movable or does it kind of have to keep the boots in that one place. Thank you for the tips I will now order 303 and the finishes for the boots and belts thank you

@metamorphiccustoms

2 жыл бұрын

You’re very welcome and thanks for watching! The Angelus clear coat is made for textiles, so it dries flexible. (My entire HT ESB Vader suit is coated with Angelus Matte.) Mod Podge also dries fairly flexible as long as it’s a thin application. But I recommend Angelus if you want to add a clear coat. I only use Mod Podge for minor repairs since it’s really an adhesive.

Great vid... But What would you recommend for the Hot Toys Superman78 chest symbol. I seen other collectors say it begins cracking after time as well. Would 303 by ok.. ? Thanks

@metamorphiccustoms

Жыл бұрын

Thanks and good question. I do not personally have the HT 78 Supes, but if the S symbol is made of vinyl or pleather, you can defintiely use th 303 periodically.

Thanks for the video! What should I do with the Justice League Batman’s body and cape

@metamorphiccustoms

2 жыл бұрын

Thanks for watching! I don’t have the JL Batman but if it’s like the Keaton Batman (rubber body, pleather cape) then I would use 303.

Getting the 89 Batman 2.0, this will be a very helpful video

@metamorphiccustoms

4 ай бұрын

Thanks for watching! The 2.0 should be an awesome figure.

Great video, I just bought the Boba Fett throne set and I was wondering how to protect his belt and holster. Do you have any tips for sealing tattered or frayed edges of cloaks/sashes?

@metamorphiccustoms

Жыл бұрын

Good question! I would actually apply a very small amount of Mod Podge to the edges using a very thin brush. (Just rub the side of the brush against the edge of the cloak. ) Thanks for watching!

Hey man, loved the video. I live in Minnesota and the indoor humidity during the winter drops to around 20-35%. Some of my figures are still NIB as I don't have them all displayed. Is that humidty too low, or should that be okay? Thanks!

@metamorphiccustoms

2 жыл бұрын

Thanks so much for watching! Most of the information I have found tends to point at a target humidty range between 30~35% and 55~60%. Regarding the low end, I do recall reading the lowest a museum/collection area should go is 25%. But again, that was just one source. I would guess the best thing to do is probably use 303 to keep the pleather components hydrated.

@metamorphiccustoms

2 жыл бұрын

@KZread Commenter Yep, that should work in theory. Mine’s usually at the 40-45% range as long as I keep my A/C on (on auto).

Awesome video! I've never heard of the Angelus products before. So say for the Hot Toys ESB Vader, would use want to use the 303 or the Angelus? And if it's the Angelus, would you use the matt finish or satin?

@metamorphiccustoms

2 жыл бұрын

Thanks! You could go either way. The Angelus creates a kind of permanent clear coat that acts like an additional protective barrier against ambient temperature changes. On my ESB Vader I went with Angelus Matte. (But if you feel more comfortable just using 303, you can do that too.)

@mafiaxjames

2 жыл бұрын

@@metamorphiccustoms how did you take the head and capes off the esb vader?

@metamorphiccustoms

2 жыл бұрын

@@mafiaxjames Just pop the head off by pulling upward. It comes off pretty much just like on any other HT figure. Once you have the head off, you'll see the cape can easily be removed.

hi question, i bought a HT crow at a good deal with some super minor flaking and the shop i got it from recommended the angelus black leather paint instead of the gloss/matte finisher you mentioned. what would you say is the benefit of using the gloss/matte finisher over the black leather paint?

@metamorphiccustoms

Жыл бұрын

Thanks for watching and for the question! Ok, long answer: The Angelus Black paint is great...but, in my opinion, it's not really for maintanence or damage prevention. Its for modification when series repairs are needed. When the Pleather has only begun to lightly crack, but NOT flake yet, I recommend applying a thin coat of Mod Podge. The Mod Podge is the glue that will hold the pleather together and help to prevent further cracking and potential flaking. (You can also choose to go this route if only minor flaking is visible.) If the pleather is already badly flaking, you can proceed to finish peeling it all off. Then use the Angelus Black paint to coat the fabric surface that was under the pleather. The finished product will look significantly cleaner and better than the previous peeling pleather. But, of course, it will not look like pleather/leather as it once did. It will simply look like black fabric. (This technique is actually pretty common for badly flaking 1/6 scale products.)

Thanks for an informative video, I've enjoyed it very much. I'm curious though, what would you recommend for a Hot Toys Dog Alien in order to prevent decay of the rubber over time? Which gloss would work better on that kind of rubber? Keep it up!

@metamorphiccustoms

Жыл бұрын

Thanks for watching! I've had the HT Dog Alien since its release back in...2009? That is one figure I have enver applied anything to at all. It has never cracked or faded. If I had to put something on it, I'd probably use Etsu Silicone Grease (I have a video on that product on my channel).

@danvladoiu9365

Жыл бұрын

@@metamorphiccustoms thank you for your suggestion.

Thank you for making this video! I have a question: there’s no 303 in my country, but we have the Angelus Acrylic Finisher. My Spiderman Upgraded Suit FFH hasn’t flaked yet, but I want to put something on it for prevention. Can I use the Angelus for prevention? If yes, do I need to apply it regularly once a month or just a one time application to last forever?

@metamorphiccustoms

2 жыл бұрын

Thanks for watching! Angelus is a product made for leathers (and pleather) textiles. Thus, I wouldn't use it on rubber suits. (I believe the HT Spider-Men are more of a rubber suit?) I have seen cases of the HT Spidey Suits creasing when left posed, but havent seen any flaking. If you can't find 303 in your area, I would look for an alternative to it. 303 is basically a UV protectant for Rubbers, Vinyls, plastics, leather, etc. (Not that you would leave your HT's in the sun, but the 303 helps to keep a level of healty moisture/ hydration in the rubber/pleather.) So the goal is to look for a similiar protectant or even a leather/ pleather conditioner. Automotive-care products are usually a good starting point.

@therealgeorgiadacosta9320

2 жыл бұрын

@@metamorphiccustoms Thank you for getting back to me! Ok I will look for something similar in my local area

What a great video, I needed this so badly. Neglecting to bring my figures to Japan because of the insane humidity. But will do this and invest in some climate control things 😍

@metamorphiccustoms

Жыл бұрын

Happy to help! Thanks for watching and good luck!

Hello!! Just stumbled upon your channel and as a noobie to this hobbie. Your videos have been helpful!! I have a question as I recently ordered the The Clone Wars Season 7 Ahsoka Tano from Hot Toys. From my understanding, it has seamless arms and I am worried about the skin breaking. I heard something about a Wonder Woman seamless arms experiencing some issues with the same thing? What should I use or do to protect it and not have the elbows and arms break or flake? Thanks!! 😊

@metamorphiccustoms

2 жыл бұрын

Thanks for watching and welcome to the Hobby! Yes, there’s been many complaints about rubber/silicone bodies tearing at the joints. To be honest, I’ve never had a rubber or silicone body tear on any of my Hot Toys, but I realize it is definitely a real issue for many. What I can say is do not use 303 on the soft silicone bodies. 303 is for pleather or the stiffer rubbers (like the Keaton Batman suit you see in the video). For softer silicone figures, I have seen some people use “Shin-Etsu” grease. (You can find it on Amazon.) It’s a grease made to prolong the life of silicone components, but I have never used it myself…yet.

what would you recommend for the Hot toys Winter Soldier figure? I managed to pick one up that was almost pristine, found a patch near the wrist that peeled. Also a piece of the pleather jacket that goes around the right arm became unglued. Apart from that the pleather is in pretty good condition, just don't want to display him and have the pleather ruined.

@metamorphiccustoms

2 жыл бұрын

Hey thanks for watching! So… unfortunately if the pleather has started to actually peel off, it may be too far gone. However, you can potentially stop further peeling/cracking by applying a light coat of Mod Podge on the pleather. If you do, choose between Mod Podge Matt or gloss. (I recommend Matt, but that’s just my personal taste.) If you apply the Matt version and think its too Matt, you can always apply 303 over it to bring out the shine. (Mod Podge is basically a glue that will hold the pleather together. )

Amazing tutorial, just what I needed! Love your work. Was wondering what would you recommend for Hot Toys Alien figures where the rubber body lost the original shine/gloss. Would that also be the 303 spray? Heard many people were using mod podge/gloss clear coat, but to my understanding that would significantly limit the articulation and make the figure static. Thanks in advance and keep up with the videos - brilliant content!

@metamorphiccustoms

Ай бұрын

Thnaks for the kind words and for watching! This is a great question. (I may need to try something on my HT Dog Alien.) Mod Podge glass isnt a terrible idea. It shouldn't make too static, but it may not be as flexible as before. Another option is Angelus Gloss Coat. Because Angelus is designed for textiles, it should retain flexibility.

Hi, great vídeo, thanks!!! If I apply the acrílicc finisher, do I have to apply the 303 protectan? And How often do I have yo do it.?

@metamorphiccustoms

2 жыл бұрын

Thanks for watching, Alvaro! You do not technically need apply any of it. What I mean is you can apply the Angelus and not apply the 303; or you can go straight to the 303 without applying the Angelus. (The Angelus is a one-time coating, while the 303 is a maintenance product you should reapply at least once every 6 months or so.)

@alvarosingaucho304

2 жыл бұрын

@@metamorphiccustoms Thanks man!

@metamorphiccustoms

2 жыл бұрын

@@alvarosingaucho304 Anytime!

What about esb Vader should i use something for all the sculpted gloves ? And for his suit too?

@metamorphiccustoms

2 жыл бұрын

Good question! I used Angelus Matte on my ESB Vader suit. (But you could use 303 if you want to keep it simple.) The gloves are just molded plastic, so they can be left as-is. Thanks for watching!

what should i apply on my anakin skywalker figures ?

@metamorphiccustoms

2 жыл бұрын

I used Angelus Satin on my HT Dark Side Anakin. You can use that, Angelus Matte, or simply just apply 303 to keep it moisturized. Thanks for watching!

Found this thing called 3D LVP conditioner, basically for your car interior for materials like leather, vinyl, and plastic and rubber, what's your opinion in using it as an all in one for hot toy materials preservation?

@metamorphiccustoms

Жыл бұрын

Thanks for watching! I've never used 3D LVP, but if its for vinyl it may help. I would sa stick to 303 due to the many people that have vouched for it over the years, but if you have no choice, give the one you found a try. (Just dont use it on the soft TPE/ Silicone rubber bodies like Ahsoka.)

Great video👍 Will 303 work on ps4 and upgraded spidey? With The red and blue and Black lines?

@metamorphiccustoms

2 жыл бұрын

Thanks!!! I don’t personally have the HT Spider-Men, but if the suits are rubber then 303 should work. You could try it in a very small spot behind the figure to check. Just don’t put the 303 on anything that looks or feels like it may be cloth/fabric.

Hey man awesome video!!! I was wondering if you could help me. I am a first time hot toys buyer. I just bought all 3 hot toys terminator t800 figures brand new. Dropped some decent coin on them so I want to do my best to protect them. With those specific faux leather items which should I use? The 303 towel method or the angelus brush method? And also, The dx10 has REAL leather. What should I use on that baby? Thank you so much!!

@metamorphiccustoms

2 жыл бұрын

Hey Nicholas thanks for watching and welcome to the HT hobby! You can use Angelus on faux leather and real leather. But honestly, I would only use Angelus on the faux leather as added protection. Also for the faux leather, you’ll want to maintain it by applying 303 every few months. (I re-apply 303 every 3 months or so.) You can choose to skip the one-time application of Angelus, but I do recommend maintaining the faux with 303. As for the real leather components, I recommend a leather conditioner. (Brands like “Blue Magic” or “Trinova” seem to work well for real leather.)

@g0dkeith

2 жыл бұрын

Gratz man! I'm also a ht first timer, got a battle damaged version t800. Just looked up the 303 product on Amazon, should I get the protector or the leather care one? Also, will the angelus product make the leather part looks too shiny? coz that wouldn't match the battle damaged theme.

@metamorphiccustoms

2 жыл бұрын

@@g0dkeith I used the 303 protector. I never used the leather care but I know others have and it also works well. You can use Angelus Matte, but if that’s still too shiney for you, then I recommend just sticking with 303.

Thanks for the great content. Do you recommend using 303 on the new Falcon & Winter soldier Bucky figure? I have not received it yet so I want to start preparing for it. Does posing the figures that have pleather garments make them dry and Crack easier?

@metamorphiccustoms

Жыл бұрын

Hi and Thanks for watching! Yes, if the new figures contain pleather parts, you can definitely use 303 on the pleather components. You'll have to wait to have them in-hand to determine if the parts are pleather vs rubber or silicone. But Bucky's jacket is a good example of what is very likely to be pleather. Posing will only effect them if the pleather has already been effected by drastic changes in temp/humidity. (If it has been effected, then yes, the pleather is likely to begin cracking at the area where its been folded/ creased.)

@someguy8523

Жыл бұрын

@@metamorphiccustoms thank you so much

When you use the angelus, are you still able to bend the areas that you painted? Or does it become pretty stiff and no longer able to be adjusted/posed?

@metamorphiccustoms

Жыл бұрын

Great question and thanks for watching! Angelus was made for textiles and leathers, so the pleather will stay just as flexible as it was before the application.

Would a coat of Mod Pudge offer enough protection for pleather boots, pouches and belts? I live in a pretty dry climate with low humitity.

@metamorphiccustoms

2 жыл бұрын

Using Angelus or Mod Podge basically adds a barrier coat to help prevent against changes in ambient temp/humidity. For this kind of protection I usually recommend Angelus as it was made for leather. (I only use Mod Podge for minor repairs or on pleather that has just begun to crack, but it can be used in a similiar fashion as Angelus.) Thanks for watching!

thanks desi,i will do it on my obi-won boots..can i apply it too on HT darth vader rogue one?

@metamorphiccustoms

2 жыл бұрын

Thanks for watching! Yes, you can apply it on the pleather or rubber components. I applied Angelus Matte on my HT ESB Vader suit. Worked great!

@j-toys4065

2 жыл бұрын

dessi,if i applied the angelus acrylic or 303.im planning to move soon.is it ok to let it back on the box for awhile with the shipper box..

My Mezco Green Arrow is already cracked. Now I'm gonna spray all my leather toys tomorrow, I'm not taking chances

@metamorphiccustoms

4 ай бұрын

Thnaks for watching, and sorry to hear about the Mezco! If its pleather, and its cracked but not yet peeling, I would use Mod Podge. Thta should create a seal that prevents further detrioration. For the other pleather components that are still in good shape, start applying 303 with a microfiber towel every 3 - 6 months.

Hi loved your video, I just use 303 leather on my Hot Toys Vader quarter scale on the pleather parts, I reapply every 3 - 6 months is that okay or do I need other products before the 303 application?

@metamorphiccustoms

2 жыл бұрын

Thanks Keiron! That should be OK. As long as you keep reapplying every 6 months or so, it will keep the pleather moisturized.

@keironbartlett_drums

2 жыл бұрын

@@metamorphiccustoms thank you for your reply, just have another question, I own the Vader quarter scale but as I’ve noticed when wiping down the pleather with 303 leather… and from the instructions the neck part doesn’t come off like 1/6 vader to be able to remove the cape and shoulder armour so I’ve only wiped down the parts that are exposed and can get to if you see what I mean, will the pleather parts under the armour be okay? In regards to humidity I live in the UK, the humidity metre says 50% normally which js in the 40 to 60% marker but sometimes on a really hot evening it drops to 33% I’m guessing it’s not a major thing to worry about and the 303 should keep the pleather fine?

@metamorphiccustoms

2 жыл бұрын

@@keironbartlett_drums Yes, there will sometimes be areas of the pleather you just can’t get to. I wouldn’t worry too much about those areas. Just focus on the areas you can get to and the pleather should hold up. The humidity ranges you mentioned don’t seem that bad, but if there are sudden changes that’s when the 303 comes in handy.

@keironbartlett_drums

2 жыл бұрын

@@metamorphiccustoms thank you so much for your response. I’ll definitely keep that all in mind. 😃👍🏼

Will this work on mezco figures? I just got the crow and is it best to apply it as soon as i get the figure?

@metamorphiccustoms

4 ай бұрын

I don't own any of the Mezcos, but these emthods will work on most pleather components. Thanks for watching!

Does Mod Podge help with preventing tearing/splitting of a suit, specifically on JL Batman?

@metamorphiccustoms

4 ай бұрын

Yes, it should help. It adds a top coat sealer to an existing pleather component. However, I do not have the JL Batman so can't comment directly on that particular figure. From what I have seen though, Mod Pdge may be a good idea. Thanks for the question!

Will it work for mezco figures I'm not sure what material they use but not sure if it Breaks down over time

@metamorphiccustoms

Жыл бұрын

Hey thanks for watching! It will work for pleather materials. (Just dont apply of any these products to cloth materials.)

If you apply the angelus, can you still maintain with 303 on the same area?

@metamorphiccustoms

7 ай бұрын

Yes, I'v done it before without issue. However, you technically shouldn't have to use 303 if you applied angelus. Thanks for watching!

@thegillmanedits

7 ай бұрын

@@metamorphiccustoms Thanks for answering! Super helpful!

Do we need to apply the 303 AFTER applying the Angulus clear coat? 🤔

@metamorphiccustoms

Жыл бұрын

Technically no. However, I would recommend it. Typically, I say you don't have to apply the Angelus, but do apply the 303.

For maintenance, how long does the 303 protectant last? I'm kinda paranoid because I bought a mezco ascending knight batman and it's known for the cape to peel, so i want to prevent that. Thanks again for the video

@metamorphiccustoms

Жыл бұрын

Hey, thanks for watching! It depends on your environment and display area. I like to re-apply at least once every 6 months. But if your area is really dry or the humidity has drastic changes, I would reapply more often. Maybe once a month.

@Mortamir_ActionFigures

Жыл бұрын

@@metamorphiccustoms Thanks for the reply

Kind I use the 303 on the val kilmer batman bc im kinda iffy on it bc the different type of rubber/latex

@metamorphiccustoms

4 ай бұрын

No, I wouldn't. I have the HT Kilmer and have not applied 303, or anythiing else for that matter. It has a particular sheen that may be affected by the 303. Thanks for the question!

Oh after I read the comments, you said Angelus Clear Coat is better on a figure that you will pose around? So would you say in my case (Spiderman) the Clear Coat is more suitable than the Acrylic Finisher? Thanks again!

@metamorphiccustoms

2 жыл бұрын

I wouldn't Use Angelus on a rubber suit. (It may not cause any issues, i just ahven't tried it myself since Angelus is for Leathers/Pleathers.) For rubber suits, go with 303 protectant or a leather/pleather conditioner.

I haven’t had any pleather issues at all including figures which are 10-years on plus. I’m in the UK though so it’s not so hot / humid.

@metamorphiccustoms

Жыл бұрын

Thats awesome to hear! (And thanks for watching!) As long as the pleather stays in a controlled environment, the chance of any cracking/peeling are significantly reduced!

Can you use the Angelus product on all pleather vs 303?

@metamorphiccustoms

Ай бұрын

Sure. I dont see why not. Thanks for watching!

Which product would you recommend for Darth Vader hot toy? I just got the Kenobi version and I want to make sure it last!

@metamorphiccustoms

17 күн бұрын

Hey thanks for watching and for your question. Actually, I gave my ESB Vader a thin coat of Mod Podge. It was just so much pleather, I thought it would be great to take that extra step to permanently seal it. I’ll be doing the same with my Kenobi Vader when he comes in later this month. Alternatively, you could simply apply 303 every 3 -9 months. It depends on your environment. If the humid is low or well-controlled, you can reapply every 9 months.

I had a older sideshow 1/4 scale piece that had alot of flaking and cracking. I wound up throwing him out.

@metamorphiccustoms

17 күн бұрын

Thanks for watching! Yeah, once it starts flaking, there’s no going back. You can peel off all the pleather, then use fabric paint to make it look decent, but it will never look like it once did.

Thanks but I am confused. When do i use 303 and when do i use Acrylic Finisher?

@metamorphiccustoms

Жыл бұрын

I highly recommend using 303 periodically on the pleather components. The acrylic finsher is not necessary, but some like to use it to add a thin layer of protection while also changing the sheen from matt to glossy or glossy to matt. If you choose to use the acrylic finisher, you can also apply the 303 on top once the finsher is dried. (But again, you do not need the finsher. If its easier, just stick with the 303 by itself.)

Hi, not so sure if I should apply 303 on my Luke skywalker snowspeder pilot HT And Anakin clone wars HT. don’t know about the material

@metamorphiccustoms

Жыл бұрын

Thanks for watching! The only spot you should apply 303 on HT's Snowspeeder Luke is on the pleather components. In other words, his belt and holster. (That's what I did to mine.) As far as Anakin goes, same thing = Pleather components. I only have Episode 3 Anakin, not the Clone Wars version. If he;s like the Episode 3 version, apply 303 to his belt, boots, and any other pleather components. (Not sure if the Clone Wars version has a pleather or fabric vest. If its fabric, do NOT apply 303.)

@beatrizpuerari9813

Жыл бұрын

Oh that’s great! Thank you very much

@metamorphiccustoms

Жыл бұрын

@@beatrizpuerari9813 You're welcome!

I'm thinking about 3Zero's products. Do artificial leather splits only occur in hot toys?

@metamorphiccustoms

9 ай бұрын

The splits, cracks, flakes and general deterioration can happen to all pleather (faux leather) products. From HT, to 3Zero, to pleather furniture around the house. It just depends on the quality of the pleather and the environmental conditions. Thanks for watching and for your question!

What about the hands of the figures? Does those components sweat? Since, most hot toys hand components feel pretty rubbery.

@metamorphiccustoms

Жыл бұрын

Typically, no. The hands are usually PVC and none that I have owned have ever released any oils or chemicals. Good question and thanks for watching!

Is the Angelus applied to boots flexible enough that it would not crack if you bend at ankle? I guess in a larger sense, if you were to eventually sell the item, would there be any posing restrictions because of finish cracking?

@metamorphiccustoms

Ай бұрын

Thnaks for watching! No, it shoudl not restrict movement or crack. (It's never happended to any of the boots I've applied it to.)

Hey was wondering I just bought myself endgame Thor, Cap, and Spiderman and was told thors pants are made of pleather and Spider-Man’s suit was made of a rubber material. Was wondering if I can use the 303 wipes/spray for both the pleather and rubber?

@metamorphiccustoms

2 жыл бұрын

Good question. You can apply 303 to most rubber components. I coated Endgame Thor's pants with Angelus Matte and then treated it with 303. (You can skip directly to 303 though). I have Endgame Cap, but honestly not sure what his suit is made of. Maybe a a rubber/fabric mix? (I did not treat my Cap with 303 since I wasn't absolutely sure if it was an entirely rubber suit or not.) I do not have Endgame Spidey, but if he has the traditional vinyl or rubber suit then 303 should work!

@Dholt29

2 жыл бұрын

@@metamorphiccustoms oh okay sounds good I have the Spiderman from far from home with the red and black suit and was told the black areas were rubber. Just didn’t know if 303 could be used on both pleather and rubber just didn’t want to damage the fabrics because it wasn’t able to be put on there

@metamorphiccustoms

2 жыл бұрын

@@Dholt29 You can use it on rubber, but not on the cloth fabrics. 👍

@Dholt29

2 жыл бұрын

@@metamorphiccustoms so I can definitely use the 303 wipes or spray on rubber and pleather without it damaging either? Do you personally use it on both? And which one would you recommend I saw there’s a white container and a blue container?

@metamorphiccustoms

2 жыл бұрын

@@Dholt29 Both containers should be the same as long as you're using their "Protectant" spray. Yes, i use it on rubber too. For example, in the video I apply it to the Keaton Batman suit which is rubber (only his cape is pleather).

If you put on the clear coat, does it crack when you bend it?

@metamorphiccustoms

Жыл бұрын

No, the Angelus is made for leather textiles so it will not crack when flexed. Thanks for watching!

what about using leather honey or TriNova Leather Conditioner and Restorer with Water Repellent Formula insteed of using 303? Im talking spefcific of Sideshow Premium Format all T800's (Terminator police shootout, T2 clean and batle damaged all pleather material)

@metamorphiccustoms

Ай бұрын

Thanks for watching and good question. The issue with Leather Honey is that its only for Leather. Not for Faux leather or pleather. (According to the product info on their site.) I dont knwo much about TriNova, but i think its the same with that product. Personally I would stick with 303 or a coat of mod podge.

What if we applied 303 to materials that are pleather? Would they get ruined?

@metamorphiccustoms

6 ай бұрын

Do you mean to ask 'what if you apply 303 to non-pleather materials'? If so, please be aware that 303 may stain different fabrics or non-pleather materials. This is not always the case, but don't risk it. If you were asking if its ok to apply 303 to pleather, then yes, I always recommend applying it to HT's pleather components. Thanks for watching and for your question!

Gosh thank you for explaining these different methods. I just recently bought a 1/6 figure of Loki and noticed the tiny flaking happening in the pleather, and it send me to panic mode 😢 Heck I'm still panicking right now since I don't know if these products are available in our local hardware 😱😭

@metamorphiccustoms

Жыл бұрын

You’re very welcome and thanks for watching! If it’s already cracking/flaking, you’ll want to seal it with Mod Podge to prevent further flaking. Mod Podge will usually be available at your local hobby store or online stores like Amazon. (But it won’t be available in hardware stores.)

@VongolaChouko

Жыл бұрын

@@metamorphiccustoms Can we also use the 303 protectant for pleather? I noticed that the packaging only says it's for rubber, vinyl, and plastic.

@metamorphiccustoms

Жыл бұрын

@@VongolaChouko Yes Sir. Pleather is essentially plastic bonded to a fabric backing. I have been using 303 on pleather components for well over a decade now. Good question!

@VongolaChouko

Жыл бұрын

@metamorphiccustoms This is well noted, thanks so much!

Is there anything taht I can use instead of 303? I can't find 303 in my country. Even on Amazon I can't find it. I can buy it from another countrey but if there is anything you can suggest me I would prefer it.

@metamorphiccustoms

Жыл бұрын

Its a great question, and I wish I had a better answer, but I always recommedn 303 because I've personally used it. You can try looking for products which are meant to maintain or increase the life of pleather materials. Perhaps there is a moree readily avalable option in your area that can serve the same purpose as 303.

@asabi1455

Жыл бұрын

@@metamorphiccustoms thanks a lot

I am thinking of getting some hot toys spider man characters, venom, green goblin spidey etc. What would you recommend doing to protect them? And is it smart to just do these measures right when you get the figure.

@metamorphiccustoms

6 ай бұрын

The 303 and Mod Podge are really for pleather or thin vinyl components. I have a couple of HT Spideys. My guess is 303 and mod podge should not be applied to these suits. They appear to be a fabric or a rubber mix, which do not require 303. (In a worse case scenario, 303 could even damage/ stain fabrics. ) I have heard alot of complaints of the HT Spidey suits creasing after being posed. But I have never heard of them cracking or peeling. This leads me to believe the material does not require 303. Thanks for watching!

@JohnSmith-mt8tq

6 ай бұрын

@@metamorphiccustoms awesome. I was just curious. I assume this is also the same for whatever material venom is made out of? The main issue would just be creasing and sticking if it's kept in some sort of dynamic pose for a long period of time?

@metamorphiccustoms

5 ай бұрын

@@JohnSmith-mt8tqThat’s correct. I know several people actually use the Shin Etsu grease for Venom. (It’s the other product I covered in another video for maintaining HT’s with soft TPU bodies.) kzread.info/dash/bejne/iqOj1a2ops3Fpps.htmlsi=ZGjR_JkoLYmiuG-J

My Keaton cape has already started to flake...can applying 303 stop it?

@metamorphiccustoms

Жыл бұрын

If its already started, you'll need ot apply Mod Podge first to seal it. Oterwise no amount of 303 will prevent further flaking.

@AugieRockero

Жыл бұрын

@@metamorphiccustoms thanks, I just bought a custom cape. but I'll use 303 on the body ...no signs of wear there yet. That cape that it came with is not worth saving anyway!

@metamorphiccustoms

Жыл бұрын

@@AugieRockero Have to agree!

Does this work on white pleather or will it cause paleness/darkness on that ?

@metamorphiccustoms

4 ай бұрын

Thanks for watching and for your question! Yes, it should work. However, my suggestion is to apply a very small amount of 303 to a non-visible area first. Let it sit for a month or so, then inspect it to ensure it has not caused any strange stains. It shouldn't.... but this is what I would do to be safe.

I have the legacy black panther his suit is all rubber it does stick to itself in the armpit how would I keep this preserved I live in south Louisiana if you could tell me some info on how to preserve this figure

@nickdeleon7976

2 ай бұрын

No one covers the rubber figures I've tried to find a video....I don't have a detolf...I've decide to just box them back up until I get a detolf

@metamorphiccustoms

Ай бұрын

Thanks for watching! I dont have that figure. If it is like the HT Spidey suits, it may be difficult to prevent the 'sticking'. Also, having a dislay cabinet is important, but it won't solve any humidity issues. Also, Detolfs are not sealed so your figures will get dusty. (I sealed my detolfs with strips of weathering pile. That really helps with the dust.)

@nickdeleon7976

Ай бұрын

Thank you for the info that really helps

With the angelus you said it was permanent, does that mean it's a one and done when applying? Asking as someone that's looking into getting a figure and has only now found out about the maintenance.

@metamorphiccustoms

9 ай бұрын

Yes, the Angelus is basically a clear-coat. You only have to apply it once. However, if I have to choose, I would go with 303 applications once every 6 months. (That’s just my preference.) Thanks for watching and for your question!

@thomasneary799

9 ай бұрын

@@metamorphiccustoms If it were something like that new Anakin being released then, you'd recommend the 303 over the Angelus then?

@metamorphiccustoms

9 ай бұрын

@@thomasneary799 Yup, I’d do 303. I use 303 on my Dark Side Anakin.

What would you recommend using on the jacket of the hot toys terminator mms238?

@metamorphiccustoms

2 жыл бұрын

I believe MMS 238 has a standard pleather jacket. I would recommend 303 every few months. If you want to take it a bit further, you can apply Matt or Satin Angelus finisher before the 303, but the Angelus is not necessary. Thanks for watching!

@canadiancollector696

2 жыл бұрын

@@metamorphiccustoms how often would you apply the Matt or Angelus?

@metamorphiccustoms

2 жыл бұрын

@@canadiancollector696 the Angelus Matt or Satin is just a one time application. It’s basically a clear coat for pleather/leather. Only the 303 needs to be reapplied every so often depending on your display area environment.

@canadiancollector696

2 жыл бұрын

@@metamorphiccustoms thank you so much for the advice and the great video.

@metamorphiccustoms

2 жыл бұрын

@@canadiancollector696 Anytime! :)

Hey OP, would baby oil work on pleather?

@metamorphiccustoms

4 ай бұрын

I have never used baby oil, but I hear its a good alternative. I just can't confirm from personal experience. Thanks for the question!

will this work for gametoys sephiroth?

@metamorphiccustoms

4 ай бұрын

Hey thanks for watching! I do not own that figure, but if the components are pleather (i.e., look and feel like pleather) I would use the methods and products described in this video.

Do i need to apply this every month or every 3 months? Can everybody tell me pls i just bought hot toys the batman and dx19 dark knight

@metamorphiccustoms

Ай бұрын

It depends on the environment in your display area. If you have a good HVAC system and/or the humidity in your area remains consistent and under 60%, I would say to reapply every 3- 6 months. Conversley, if your display area had no humidity control and humidity is constantly spiking (i.e., Tropic climates with no HVAC) then apply 1 to twice a month. (But in this latter scenario, the 303 will only help so much before the pleathe rbegins to detriorate. The firts goal is to first manage the humidity.)

Do you recommend this for the death trooper specialist ? I know there have been some pleather issues and I don’t want mine to get ruined

@metamorphiccustoms

2 жыл бұрын

Yes, I used 303 on the Pauldron of my Death Specialist. I would recommend it.

@---ne9ez

2 жыл бұрын

@@metamorphiccustoms thanks man, I really appreciate the help

@metamorphiccustoms

2 жыл бұрын

@@---ne9ez Anytime! 👍🏻

@---ne9ez

2 жыл бұрын

@@metamorphiccustoms I applied it and i feel like I made it worse, any specific tips for how you did it ?

@metamorphiccustoms

2 жыл бұрын

@@---ne9ez Allow me to ask: Was the pleather already beginning to show cracks in it? In your first comment you mentioned you knew there were some pleather issues with this figure. (You’re definitely right!) I thought you meant “known issues with the figure” and that maybe you wanted a proactive approach. (Sorry if I misunderstood.) However, if it’s already begun to crack you need to coat it with something that will hold the pleather together. A light coat of Mod Podge will work. On the other hand, if the pleather has already begun to flake off in small chunks, (so more than just a few simple visual cracks) then it’s too late. If it’s flaking off, the only real solution is to finishing peeling off all the pleather bits, and then repaint the area with black fabric paint. (It will never look the same because it won’t look like pleather, but I know that’s what some people have done in the past.) Lastly, applying 303 shouldn’t make it any worse, even if it’s starting to crack. The only time it may seem to get worse is if the pleather was already loose (beyond repair) and gently applying anything at that point removes the loose chunks of pleather. Hope this helps…

Should i apply First 303 and than angelus or angelus and than 303? And once i apply angelus i should never apply It again Just keep 303 3-6 months ?

@metamorphiccustoms

2 жыл бұрын

Go with the Angelus first. Once you apply it the first time, you really don’t need to reapply it again. The 303 can go on after the Angelus has fully dried. You reapply 303 every few months (I reapply every 6-8 months in my figures.) Thanks for watching and good question!

@turdmidfartland

5 ай бұрын

Jesus christ no, never 303. Who is telling everyone to use this shit?

Would you recommend applying 303 on new figures?

@metamorphiccustoms

17 күн бұрын

Hey thanks for watching! Yes, I always apply 303 from the very beginning, or apply a thin coat of Mod Podge if it’s ALOT of Pleather. (For example, On figures like HT Vaders with so much pleather, I just straight apply a coat of Mod Podge.)

@mist_rainz

17 күн бұрын

@@metamorphiccustoms I have the new HT Vader ironically asking that question 😂 Will do then! Thanks👍

How comes that you didn't used 303 on Count Dooku boots? I know an acrylic finisher is a layer of protection, but that layer should or could crack if you repose your figure and change the angle of the boots. On the other hand, 303 hydrates and protects the leather. So, the question is what does 303 do to pleather? Doesn't it offer the same treatment as it does to real leather or what is the reasoning in this case? Thank you, Desy!

@metamorphiccustoms

2 жыл бұрын

Great questions and thanks for watching!!! Yes, the 303 pretty much keeps the pleather (or rubber) moist/hydrated just as it would real leather. You can also apply it over the Angelus finishing coat (after the coating is fully dried). Applying it over the Angelus does offer additional moisturizer over the clear coat so it’s like a double barrier. The Angelus by itself does not moisturize the pleather but it does act as a sealer/barrier to help protect it against any changes in ambient temperature. Also, the Angelus was specifically made as a finisher for leathers so it’s flexible. It won’t crack when you pose you’re figure. (At least it’s never cracked on my figures. Fingers crossed!)

@CiprianBindiu

2 жыл бұрын

@@metamorphiccustoms Sweet! Was not expecting the finisher to be flexible. That's a total surprise! Thank you for your answer and for sharing your experience with all of us. PS: Watching your videos with PopCorn, that's how much I enjoy what you do!

@metamorphiccustoms

2 жыл бұрын

@@CiprianBindiu You’re very welcome my friend! Glad I could answer your questions and that you’re enjoying the content. Love the feedback and questions! 👍🏻🙏🏻

What about rubber suits like the HT spiderman rubber suits

@metamorphiccustoms

2 жыл бұрын

It depends. I don’t have any of the HT spidey’s, but I do have the 89 Batman which is a rubber suit. (The one in this video.) I used 303 on him.

Your videos are life saver but could you recommend me a temp for my BATMAN BEGINS RUBBER SUIT because I live in a high Humidity country my country temp is between 30-35 C.

@metamorphiccustoms

8 ай бұрын

Thanks so much for watching! If you live an area where the temp and humidity is high, you'll have to control those environmental conditions inside your display room. An HVAC system is the best option, but if its not possible to have one, the next step is a regular AC and small deumidifier in the display room. The goal is to make sure the collectibles are in a room at 22-20C or lower, and Humidty lower than 60-65%.

@AhmMansurApu

8 ай бұрын

@@metamorphiccustoms I think the temp of my country is very high so it's not possible to get temp around 20-22 C but should I use 303 protection because I couldn't decrease the temp to 20-22.

@AhmMansurApu

8 ай бұрын

@@metamorphiccustoms ANd should I use a Humidifier on the figure shelf then I can controll the Humidity level with 303 protector But one thing I couldn't decrease the Temp because in my coun try the temp is HIGH

@metamorphiccustoms

8 ай бұрын

If there is no HVAC system, or AC capable of lowering the temp, then the next best idea is to check your humidity levels throughout the year. Try to use a hygrometer like the one I refernce in my video. If the humidity is above 60%, then purchase a dehumidifier for the display room. Separately, yes, use 303 to help stabilize the moisture in the pleather component.

@AhmMansurApu

8 ай бұрын

@@metamorphiccustoms Okhhhh thanks man a lot man a lot and and if my figure is in the shelf (glass) will dehumidifier work through it or I have to display the figure open

Yo late for me all my figures are destroyed as hell flaking .. it’s just a nightmare 😩😭

@metamorphiccustoms

Жыл бұрын

Really sorry to hear! If you get any more, try to keep them in a stable environment and give them a periodic application of 303. Thanks for watching and good luck!