HOT TO REPAIR USB CABLE WITH HEAT SHRINK TUBE
Тәжірибелік нұсқаулар және стиль
This is a quick how to repair a USB cable or any cable with heat shrink tube.
When you have wires exposed due to fraying or torn protective cover over the wires, the heat shrink tubes make a fast job of fixing the issue and it looks a lot better then electrical tape wrapped around it.
You can use a lighter or hair dryer to shrink the tube but I have a heat gun that I use at home for projects so it worked out really nice.
You can get similar tubing or heat gun from here.
Heat shrink tubes: amzn.to/3bCjyVr
Heat gun: amzn.to/3h7GehF
Grow your channel with www.Tubebuddy.com/recordlifem...
affiliate links above
Disclaimer: Any projects can cause harm if not done properly, please be careful and neither myself or KZread is held liable for any advice taken.
Thanks for watching.
Пікірлер: 7
Will the 3/8 inch fit a micro usb cable too?
@RecordLifeMedia
3 жыл бұрын
I would say yes. You can always see if it fits closely before shrinking the tubing.
What mm shrink tube you used
@RecordLifeMedia
2 жыл бұрын
I used the 3/8 inch tubing for the cable from harbor freight. Conversion shows as 9.525 mm. Thanks for checking out the vid.
Bro what Size . ? Is it 3.8 inch 🙄🙄
@RecordLifeMedia
3 жыл бұрын
view at 1:53 secs. 😂
@valzeppelin5153
Жыл бұрын
3/8" heat shrink tubing 3:1 shrink ratio