This is one of the best how-to's I've ever seen! No stupid music or wordy intro - wham bam, thank you man!

Thank you so much for going through this fast. Too many give long drawn out talking without giving much real info. I got all I needed in less than 2 minutes.

I have a 2004 Chevy Express 3500, horn not working but thanks to you it is now. Always a pleasure when a professional like yourself takes the time out to make a detailed video on how to fix things. I took the front assembly apart, blew out the inside and stretched the spring a little bit on the red wires, put it back together and it works perfect. Auto shop probably would have charged me a few hundred. Thank you…

Watched this today and after checking power, popped horn cover off and sand contacts and within 30 minutes had a working horn. Saved me 100 -200 probably. Thanks. watch your present videos too!

The best video! One recommendation, after cleaning the contacts, put some silicon grease (dielectric grease) on all those contacts to prevent further corrosion. The grease does not prevent electrical contact, it just keeps air away when the contacts arc. The same procedure applies to all electrical connections as well as signal light and parking light bulbs.

Thanks man. wasn't exact my truck but tear down was almost the same and your theory of the dirt was my problem, thumbs up to you. Quick and to the point. 5 years with out a horn and a little sand paper in the right place. Thanks, keep em commin. """Defiantly No-Nonsense """

This was a ridiculously good video. Top tier.

Thank you for doing that quickly, without talking about your life and what you had for lunch!

Sanding the contacts in the steering wheel totally worked for me! Thanks for awesome vid!

Got my horn working again in less than 10 minutes on my 99 gmc savana 2500....thank you!!!

Awesome. Thanks. Got mine working. Cleaned the little spring contact with a little sandpaper and bam 💥 we’re blowing again

Thanks for the help. You are an ACE!!

Worked perfectly! My truck would only beep when I would arm the alarm. I cleaned all the points first. Didn't work. Then cleaned the spring part. Works perfectly. Thanks so much

@NoNonsenseKnowHow

5 жыл бұрын

Awesome to hear man! Thanks for the comment

My ground wire ( the red one withe spring in the hole) Plastic slip got old ad broke. I rigged it, but it works. Thanks again!!

😃Haven't taken on the task yet...however, I'd like to thank this young man for taking the time to help. Thank You.

@NoNonsenseKnowHow

3 жыл бұрын

No problem. I appreciate you taking the time to drop a comment. Thanks! And good luck on the job

Great stuff man! Worked for my 2000 S10. Really appreciated how concisely you went through while still explaining what's happening. Thanks!

@NoNonsenseKnowHow

4 жыл бұрын

Awesome to hear. Thanks for commenting Josh

Awesome work way to get right to the point and quickly without an Oprah length introduction. Had to sand my fuse and reinstall about 30 times and it works. Probably could use about $5 of deoxit on my relay panel.

Thank you so much. Your spot-on instructions made for an easy job.

THANKS FOR JUST GETTING TO THE POINT !

Ballsy popping the horn without disconnecting the air bag. Good video

Perfect explanation. Dirty contacts was my problem. Thanks for the great video

Added note to my previous comment. I really appreciate the fast paced video. Nothing more annoying than to have to watch a half hour video on how to take apart a simple wire connection

@NoNonsenseKnowHow

4 жыл бұрын

I appreciate the comment man! Glad to help out. Some people comment saying that I go to fast in my videos, but it's hard for me to not do that. Just the way I roll especially if I have coffee in the morning

@omenh6784

4 жыл бұрын

@@NoNonsenseKnowHow keep up the maintenance vids on express/Savana Vans There aren't many on simple DIY maintenance.

Hit all the points. Very good tutorial on how to troubleshoot the steering wheel switch. Good job. Not clear if my 2005 Chev Xpress3500 has a horn relay. Guess I'll look again.

Thanks, nice to know some guys got it together, easy to follow, yes fast but been similar circumstance, just need know particular procedure for this vehicle.

way to go Chris. my 2000 Blazer horn stopped working so this weekend this little lady is going to try to repair her horn.

@NoNonsenseKnowHow

4 жыл бұрын

Good to hear! Let me know how you make out and thank you for your comment

Perfect man! No BS right to it, showed everything I wanted to know.

Thanks!!!! You were a BIG help. The other videos did not go into enough detail.

@NoNonsenseKnowHow

6 жыл бұрын

I'm glad the video helped you out, and thank you very much for the feedback!

Great video!! I was able to troubleshoot it in just a few minutes after I watched this. Big Thanks!!!

@NoNonsenseKnowHow

6 жыл бұрын

Jeff Jacobsen awesome to hear man and thanks for the feedback!

Sweet video man, this helped me solve my horn problem, thanks.

Thank you for an excellent video.

Awesome video. No nonsense, to the point, "this is how you fix it.". Keep up the great vids!

@NoNonsenseKnowHow

4 жыл бұрын

Thanks for the feedback Hans! Appreciate it

Thank you very much. Thought I was going to be tracing wires for days and found that it was the contact a-in the steering column.

got my horn fixed. Thanks !

Great video and instruction. Quick easy and saved me a lot of time. Thank you!

Thank you Thank you Thank you. Finally fixed it.

This worked perfectly for me. Thank you so much!

excellent thanks for sharing im gona do this i have that problem

Thanks for the express version of the repair procedure. I've already fixed my truck while most videos would still be telling me about the history of horns or some other useless information.

@NoNonsenseKnowHow

2 жыл бұрын

No problem! Glad you found it helpful

Thanks for the no BS info. All the thumbs down must be Non-mechanics!!

Suuuuper informative video. Thanks man.

Thank you for the video - It helped me fix my horn

Great, to the point video, and nice camera work. Thanks!!

Great video

You're good bro

so helpful! Thank you! Liked and subscribed.

Thank you...

Thank you .. I will try on my Chevy 2004 express horn stop working last night

I REALLY appreciate going through this as quickly as you did. Short and to the point. No problems with the air bag? I don't want it blowing up in my face.

@NoNonsenseKnowHow

5 жыл бұрын

Never a bad idea to disconnect the battery first, but no I've never had one blow up on me. In fact even the ones that I've purposely went to blow up it's kind of tricky to get them to go off. Appreciate your comment. Most people say I go too fast. lol. cant help it though!

@cymatic83

5 жыл бұрын

@@NoNonsenseKnowHow Haha that's because most people are too slow. Thanks man, keep making these!

Know it's old, but awesome info, was my issue on my 95 k1500 horn, dirty connections, thx

Nice video bro you get right to the point

Thanks 🙏 👍

thanks

Thanks bro

Thank you so much !!!!!!!

@NoNonsenseKnowHow

5 жыл бұрын

No problem at all, thank you so much for the comment

Worked on my 98 Astro 👍🏻

@NoNonsenseKnowHow

3 жыл бұрын

Sweet!

Great video!!

@NoNonsenseKnowHow

4 жыл бұрын

thanks buddy!

Good looks bro !!!!💯💯💯💯

@NoNonsenseKnowHow

3 жыл бұрын

No prob and thx bud!

As a precaution should I pull airbag fuse

I'am Your Newest Subscriber Great Videos I Just Got A 1999 Astro Van

Thanks so much. Covered completely., and didnt too WORDY!!! LOL Great vid!!!!

@NoNonsenseKnowHow

4 жыл бұрын

Word! Excellent to hear it helped out

I have a 2005 Chevy Astro van does this year has the same horn components as on your video and is the same fix ??

thanks brotha

@NoNonsenseKnowHow

3 жыл бұрын

No prob!

dude you saved myeline!!!and my wallet gracias

nice and fast

Slowing the playback speed works. Thanks!

Great instructional video but what about us novices? What tool did you use to diagnose this problem and how were you applying power to the relay connections? I have a 2013 Chevy Tahoe SSV. Iit had the horn disabled and I need to find the disable location or at least create a bypass.

@NoNonsenseKnowHow

6 жыл бұрын

William Baxter sorry about that. Yes my videos are generally geared toward people in the field and such. The tool i used is: POWER PROBE: amzn.to/2MkHfVe *POWER PROBE FULL KIT: amzn.to/2y57qMC Truly amazing tool to have and so useful. Im sure there are a few good videos on youtube on how to use them. Hope this helps. Lml how you make out.

Thumbs up 👍 not to fast 😊

So this helped me but I don't have power coming in to the fuse, as if my entire fuse block is not working correctly

I’ve got 05 Chevy express 3500. The horn only works when the steering wheel is straight. Would doing what you did in this video fix the problem ? Thanks

The low beams aren't working. tested everything. It's the switch. Thank you for any help. Or I'm going trial & error. :-)

@NoNonsenseKnowHow

5 жыл бұрын

Awesome man, i appreciate the channel support! Unfortunately I'm not to incredibly familiar with the setup on those. I work on all makes and models, so I never become extremely familiar with one model. I'm sure that if you start tearing into the steering column, it should be pretty straightforward to replace the multifunction switch. Worst-case you might have to pull off the steering wheel. Sorry I couldn't be of more help. Let me know how you make out, and thanks again!

Dónde va ubicado el claxon tengo una Express van 2000 3500 la camioneta estubo parada 8 años con el mecánico y ahora yo la eche a andar pero me robaron muchas cosas

I have a 2002 Avalanche with that same steering wheel setup.

@NoNonsenseKnowHow

4 жыл бұрын

thanks. good to know

I can't figure out how to get the screwdriver under the little nut without looking I can't see it

The other problem with 2004 express van the actual brass ring on column gets dirty keeps brass pin making contact .On the turn signal held by 2 torque screws remove and lift assemble you will see the brass pin clean that and brass ring.

On Amazon: *POWER PROBE TESTER: amzn.to/37XVZDX *EMERY CLOTH: amzn.to/2u86jLb

Any tips for a horn that WONT stop sounding?

Fuse has power, put tester lite on wire connector going to horn no lite/juice so could the relay be bad?

@NoNonsenseKnowHow

5 жыл бұрын

No, you're losing me a little bit, but the wire going to the horn should be a ground when you press the horn

@jazl3181

5 жыл бұрын

@@NoNonsenseKnowHow in your video you disconnected the power wire/ connector going to the horn and you said make sure it has power and i don't have power at the connector. So what is wrong? I have 2 horns BTW. 2003 1ton chevy express set up is a little different then yours.

@NoNonsenseKnowHow

5 жыл бұрын

@@jazl3181 haha, honestly I'm a little tuned up right now and probably not in suitable shape to answer your question. But I will watch the video tomorrow when I get a chance and see what you're talking about. If you figure it out before then let me know what you found. Good luck

fuse, relay good . hooked through factory alarm. relay clicks when using panic button. No horn sounds.

@NoNonsenseKnowHow

5 жыл бұрын

Did you check the ground going to the horn? And try applying power and ground directly to the horn?

how do I apply power?

I have a Chevy express 2009 and I didn’t find the horn relay, I just find the horn fuse and I removed it and used a circuit tester but no power there,

What GRIT emery cloth should I buy?

@NoNonsenseKnowHow

5 жыл бұрын

I forget what grit line was, but it's fine

What if the horn just sounds bad? Just replace?

How many horns are in a 05 chevy express 2500 ?

@NoNonsenseKnowHow

3 жыл бұрын

1 or 2

1:46 play it here

@NoNonsenseKnowHow

4 жыл бұрын

yes. Good to understand some of the other components of your horn system as well though.

Bruh honk the horn!!!