Thank you for watching, If you learned anything from this video. Please consider following for future content!
Жүктеу.....
Пікірлер: 84
@notone40295 жыл бұрын
Diymike and Chris, like the new personable up close down to earth filming style you guys started doin since the welding video. 👌🏻
@mariasaavedra73295 жыл бұрын
Take it to PFI for tuneing that would be a dope video 👍❤️❤️👍👍😜🤓💀🤔😛😃😀😘
@Blkeftch
5 жыл бұрын
Maria Saavedra Brent would have this car running low 9’s
@mariasaavedra7329
5 жыл бұрын
blkeftch _ I agree Brent no what he doing it would be a dope video to see
@cmsracing5 жыл бұрын
Thanks for sharing, always like learning about these little engines!
@562frankrivers25 жыл бұрын
You guys fixed it now it’s ready for anything!
@Yonelll_Kim5 жыл бұрын
Awesome video. Good instructional work!!
@Eddie57675 жыл бұрын
Carbonk shirts with crucial creations crew logo on it would be awesome merch I'd definitely buy thank guys for another great video hope you guys had great holiday break keep up the hard work!
@diymike
5 жыл бұрын
will look into it bro!
@ajnew-b38215 жыл бұрын
i don't have a car but still i like watching your videos. keep it up from PH
@bryanslocks34815 жыл бұрын
You have the same lift, compressor and craftsman tools as me. You know what good tools are.
@mystamo5 жыл бұрын
Mike saves the damn day for the b day boiiii. Ps Jan birth days are the best. Not biased
@karl68235 жыл бұрын
Mikes the man!!
@shaggins35475 жыл бұрын
Dudes beard looks so much better trimmed up. I need to trim mine a bit now.
@TheDubstepRhythm5 жыл бұрын
Rip to that handshake at the end 😂 still love y’all tho
@jimspitler63555 жыл бұрын
Magic mike FTW
@sarwatarif.78225 жыл бұрын
you guys should check v-tec solenoid screen if its clogged it will not engage properly
@girisatria10285 жыл бұрын
Nice
@michaelgraham63895 жыл бұрын
During the Holidays, Carlos needs pointy ears.
@nebulae19925 жыл бұрын
hey mike, love the videos. im turboing my k24 tsx and im unable to find cooler plugs for my motor, all the parts shops and suppliers only have 6 and 7 temp. do you know what brands and part numbers are 8 or 9. and do k20 plugs work in k24 as well? stock motor and looking at 8psi. any advice ? cheers.
@diymike
5 жыл бұрын
nebulae1992 you can run copper, just gap then closer. I think 7 heat range is the coldest you can get on copper
@MichaelKLee-jf7qs5 жыл бұрын
I have a mostly stock 09 Honda Accord and my problem is that it's not fast like your cars
@natedionne205 жыл бұрын
People have problems running iridiums all the time. The do not last as long. iridium dose not dissipate Heat very well at all. Found Ngk copper plugs to work the best.
@hdsinner5 жыл бұрын
lmao that hoodie bro! Asian Squat Social Club. I think I need one.
@belcebu59075 жыл бұрын
I dint know bout the heat number of the spark plugs ..
@davidgoodrich12585 жыл бұрын
What’s with the red CRX in the garage?
@mariasaavedra73295 жыл бұрын
More videos pleAse
@Brother2Jis_27s45 жыл бұрын
Stick some coppers in there gapped to .017-.020 and it'll be crisp with a bigger spark surface area, same heat range as the iridiums. Cheaper than iridiums and you shouldn't gap iridiums cause you'll damage the electrodes...
@ronr56404 жыл бұрын
Did they ever get this fixed completely
@rickey24093 жыл бұрын
Link to that xcessive center feed intake manifold 💪😁
@diymike5 жыл бұрын
What is the dumbest thing wrong with your car, that caused a huge problem???
@Z_TPI
5 жыл бұрын
Diymike Bad grounds..
@miatadna7396
5 жыл бұрын
My buddy putting a brake pad in backwards... last time I didn't double check other peoples work that's for sure
@djmandrick
5 жыл бұрын
The dumbest thing wrong with my car it's brilliantly practical and economic. Having been inspired for some fun by your channel I found myself on lunch looking at the car I always wanted but was too new and expensive for me at that time: early 2000s Honda Civic Type R (running it 45 miles a day now would still be a lot). I was to justifying it to myself as "It's fine, I'm only looking" with a colleague looking over my shoulder telling me about how much fun his big turbo'd Fiesta ST is on the B roads I drive to work on....
@BlackyBrownDestruction9337
5 жыл бұрын
Metal shavings got magnetized into sensors that throw off readings...
@diymike
5 жыл бұрын
@@miatadna7396 HOW HAHAHA, like the metal backing of the pad on the rotor???
@kajuankirwan62765 жыл бұрын
Check the coil plugs
@jay.paccordguy94565 жыл бұрын
USE COOPER CORE NGK PLUG!!! Or try might help also iridium your not supposed to gap them
@Brother2Jis_27s4
5 жыл бұрын
👊👊👊
@martinecaballero5 жыл бұрын
Static Mike
@travisdunn56755 жыл бұрын
Carlos said bunghole 😂😂
@diymike
5 жыл бұрын
Travis Dunn hahaha. It is the technically the bunghole 😂😂😂
@MichaelKLee-jf7qs5 жыл бұрын
By the way idk what part of Florida you guys are from but you guys got some pretty ass beaches🌴
@davidgoodrich1258
5 жыл бұрын
Michael K. Lee they’re not from Florida. Las Vegas
@MichaelKLee-jf7qs
5 жыл бұрын
@@davidgoodrich1258 AH, my mistake! 😅
@yeahman17565 жыл бұрын
spark plugs bruh... check your gaps too.. for that misfire and check your grounds. maybe not enough grounds
@mariasaavedra73295 жыл бұрын
Magic mike make us more videos ❤️👍👍👍👍👍👍😃😜💀🤗🤓👿😎🏎🏎🏎
@M_arias2 жыл бұрын
Yo bro my car has some hesitation like when I’m like slowly gassing it I texted you on Instagram idk if you can help ?
@caveman69_5 жыл бұрын
boost leak?
@ernestohernandez47435 жыл бұрын
I run 4644 plugs non iridium in my K runs perfect?
@diymike
5 жыл бұрын
lots of people can run copper plugs no problem. but from factory they come with iridium plugs, they last longer.
@ernestohernandez4743
5 жыл бұрын
@@diymike oh of course thats true but i sputtered top end with iridiums put copper and im running good 10.2 on 540hp lol
@davidjamison22945 жыл бұрын
In the sylinoid
@davidjamison22945 жыл бұрын
Check your vtech screen
@jeffreywardick67205 жыл бұрын
Felt like I was watching a kung fu movie way the sound was off for a while
@mitchellpierce93725 жыл бұрын
36mm for k series
@ScollayTable5 жыл бұрын
Why isn't he working on his new 🍍?
@cracklingice5 жыл бұрын
I think he means 3 10's because they randomly vanish on their own.
@oodles865 жыл бұрын
Guido anchovy
@JeremyRomayes5 жыл бұрын
Yurd
@ehonda42085 жыл бұрын
What the hell is the asian squat social club
@Z_TPI
5 жыл бұрын
E Honda squatting Asians smoking..
@garageadz5 жыл бұрын
Iridiums are junk! NGK copper for life.
@562frankrivers25 жыл бұрын
Looks like he needs some beard oil it’s looking a little dry there
Пікірлер: 84
Diymike and Chris, like the new personable up close down to earth filming style you guys started doin since the welding video. 👌🏻
Take it to PFI for tuneing that would be a dope video 👍❤️❤️👍👍😜🤓💀🤔😛😃😀😘
@Blkeftch
5 жыл бұрын
Maria Saavedra Brent would have this car running low 9’s
@mariasaavedra7329
5 жыл бұрын
blkeftch _ I agree Brent no what he doing it would be a dope video to see
Thanks for sharing, always like learning about these little engines!
You guys fixed it now it’s ready for anything!
Awesome video. Good instructional work!!
Carbonk shirts with crucial creations crew logo on it would be awesome merch I'd definitely buy thank guys for another great video hope you guys had great holiday break keep up the hard work!
@diymike
5 жыл бұрын
will look into it bro!
i don't have a car but still i like watching your videos. keep it up from PH
You have the same lift, compressor and craftsman tools as me. You know what good tools are.
Mike saves the damn day for the b day boiiii. Ps Jan birth days are the best. Not biased
Mikes the man!!
Dudes beard looks so much better trimmed up. I need to trim mine a bit now.
Rip to that handshake at the end 😂 still love y’all tho
Magic mike FTW
you guys should check v-tec solenoid screen if its clogged it will not engage properly
Nice
During the Holidays, Carlos needs pointy ears.
hey mike, love the videos. im turboing my k24 tsx and im unable to find cooler plugs for my motor, all the parts shops and suppliers only have 6 and 7 temp. do you know what brands and part numbers are 8 or 9. and do k20 plugs work in k24 as well? stock motor and looking at 8psi. any advice ? cheers.
@diymike
5 жыл бұрын
nebulae1992 you can run copper, just gap then closer. I think 7 heat range is the coldest you can get on copper
I have a mostly stock 09 Honda Accord and my problem is that it's not fast like your cars
People have problems running iridiums all the time. The do not last as long. iridium dose not dissipate Heat very well at all. Found Ngk copper plugs to work the best.
lmao that hoodie bro! Asian Squat Social Club. I think I need one.
I dint know bout the heat number of the spark plugs ..
What’s with the red CRX in the garage?
More videos pleAse
Stick some coppers in there gapped to .017-.020 and it'll be crisp with a bigger spark surface area, same heat range as the iridiums. Cheaper than iridiums and you shouldn't gap iridiums cause you'll damage the electrodes...
Did they ever get this fixed completely
Link to that xcessive center feed intake manifold 💪😁
What is the dumbest thing wrong with your car, that caused a huge problem???
@Z_TPI
5 жыл бұрын
Diymike Bad grounds..
@miatadna7396
5 жыл бұрын
My buddy putting a brake pad in backwards... last time I didn't double check other peoples work that's for sure
@djmandrick
5 жыл бұрын
The dumbest thing wrong with my car it's brilliantly practical and economic. Having been inspired for some fun by your channel I found myself on lunch looking at the car I always wanted but was too new and expensive for me at that time: early 2000s Honda Civic Type R (running it 45 miles a day now would still be a lot). I was to justifying it to myself as "It's fine, I'm only looking" with a colleague looking over my shoulder telling me about how much fun his big turbo'd Fiesta ST is on the B roads I drive to work on....
@BlackyBrownDestruction9337
5 жыл бұрын
Metal shavings got magnetized into sensors that throw off readings...
@diymike
5 жыл бұрын
@@miatadna7396 HOW HAHAHA, like the metal backing of the pad on the rotor???
Check the coil plugs
USE COOPER CORE NGK PLUG!!! Or try might help also iridium your not supposed to gap them
@Brother2Jis_27s4
5 жыл бұрын
👊👊👊
Static Mike
Carlos said bunghole 😂😂
@diymike
5 жыл бұрын
Travis Dunn hahaha. It is the technically the bunghole 😂😂😂
By the way idk what part of Florida you guys are from but you guys got some pretty ass beaches🌴
@davidgoodrich1258
5 жыл бұрын
Michael K. Lee they’re not from Florida. Las Vegas
@MichaelKLee-jf7qs
5 жыл бұрын
@@davidgoodrich1258 AH, my mistake! 😅
spark plugs bruh... check your gaps too.. for that misfire and check your grounds. maybe not enough grounds
Magic mike make us more videos ❤️👍👍👍👍👍👍😃😜💀🤗🤓👿😎🏎🏎🏎
Yo bro my car has some hesitation like when I’m like slowly gassing it I texted you on Instagram idk if you can help ?
boost leak?
I run 4644 plugs non iridium in my K runs perfect?
@diymike
5 жыл бұрын
lots of people can run copper plugs no problem. but from factory they come with iridium plugs, they last longer.
@ernestohernandez4743
5 жыл бұрын
@@diymike oh of course thats true but i sputtered top end with iridiums put copper and im running good 10.2 on 540hp lol
In the sylinoid
Check your vtech screen
Felt like I was watching a kung fu movie way the sound was off for a while
36mm for k series
Why isn't he working on his new 🍍?
I think he means 3 10's because they randomly vanish on their own.
Guido anchovy
Yurd
What the hell is the asian squat social club
@Z_TPI
5 жыл бұрын
E Honda squatting Asians smoking..
Iridiums are junk! NGK copper for life.
Looks like he needs some beard oil it’s looking a little dry there