Honda Shadow 600 Bobber Build - The BEST Bolt on Fender and Sissy Bar kit
Check out this awesome upgrade for your Honda Shadow 600 - the Anteris Complete Fender and Sissy Bar Kit! Say goodbye to welding hassles and hello to effortless customization with our comprehensive kit.
BUY THE KIT HERE: shoptjbc.com/p...
Our kit includes everything you need to mount up one of our curved fenders and a sissy bar to your VLX600, all without welding! With our Pressio Bolt-On Fender Mount Kit and all necessary hardware included, installation is a breeze.
But that's not all - our kit offers versatility and convenience. Whether you're carrying a passenger or strapping on gear for an adventure, our curved fender for 150-180 size tires and approximately 15" tall straight-up sissy bar have you covered. Plus, with optional upgrades like our Mono Struts and Mono Strut E-Tanks, the customization possibilities are endless.
Installation is so simple, you won't even need to do math or take your shoes off to count! All hardware is 3/8-16", requiring just one drill bit for installation. Just drill holes in the fender and axle plates, remove the chain guard, and you're good to go.
Don't miss out on this value-packed Honda Shadow bobber kit - transform your ride today!
00:00 Grossherees
00:57 What the hell are we doing?
01:08 Beer - O - Meter
01:23 Tools needed
02:34 What the Eff is this thing?
02:44 Shred the Gnar tips
03:39 Check out these other cool a$$ vids
04:04 Prepare for drilling
07:47 Drill out mounting holes
09:02 Install the Pressio
17:59 Prepare to drill axle plate
19:34 Drill out axle plate
21:02 Tap Dat hole
23:22 Shameless self plug
23:56 Back to it
25:46 Tap dat otha' ole
26:46 Find your angle
28:01 Drill to mount to fender
29:32 Final A$$embly
31:17 You did it! Let's party!
Пікірлер: 76
Love the content of your channel! Feeling inspired and exited about future projects .
Amazing job, you are an artist.
As always dropping knowledge on us. That looks like an older Holley stack Carb
@TJBRUTALCUSTOMS
3 ай бұрын
Thanks dude! It's not a holley but good guess!
Great intro the videos keep getting better.
@TJBRUTALCUSTOMS
3 ай бұрын
Thanks for watching and for the comment man! What would you like to see us do next?
Thanks for the video
@TJBRUTALCUSTOMS
3 ай бұрын
Thanks for watching and for the comment! What video would you like to see next?
VT750 ACE Duel carb, Carb AND Exhaust backfiring when giving it throttle. White-ish smoke coming out of exhaust. (Just cleaned the carb and added the performance tuning kit with velocity stacks.)
@TJBRUTALCUSTOMS
3 ай бұрын
Afterfire cones out the exhaust. Backfire comes out the carb. Unfortunately I can't diagnose from here but it sounds like you either plugged the wrong vacuum ports and or left the wrong ones open. Watch the 4 part dual carb rebuild series on the channel and I'm sure you'll see what's going on
Ahhhhhh Yeah Man.... LFG 🤘
@TJBRUTALCUSTOMS
3 ай бұрын
Thanks for the Comment man! Lets GOOOOOOOOOOO!
Its definitely something. Did I win?
Any chance for a full chopper build video start to finish?
@TJBRUTALCUSTOMS
Ай бұрын
We are working on one!!
Now I need a video of you explaining if a Honda shadow vlx 600 can wheelie? And if so please show it I don't believe they can wheelie
@TJBRUTALCUSTOMS
3 ай бұрын
I don't know, I've never wheelied man lol! I've seen too many people get fucked up doing wheelies to ever wanna try one! Lol
Can anyone let me know why is it when I change gears on my 1999 honda shadow vlx 600 it is hard to change gears it shifts in and out of every gear but it's just hard it's almost if I don't have boots one it's impossible to shift but it can be done with boots on just have to put alot of pressure to make it go into gear the clutch leaver is good it dose not slip or anything..... if anyone can help it would be much appreciated thanks
@TJBRUTALCUSTOMS
16 күн бұрын
adjust the lever dude. 👍
That bike inspired my custom paint! I love that crazy white paint job. Also, love your pointing finger 😂😂😂
@TJBRUTALCUSTOMS
3 ай бұрын
Der pointing finger ist strong!!! 🤣🤣
@craigkilling9021
3 ай бұрын
@@TJBRUTALCUSTOMS 🤣🤣
@craigkilling9021
3 ай бұрын
I’m currently using my pointer finger in the upright position at this Honda shadow some idiot tried to build that I was gifted with.
@TJBRUTALCUSTOMS
3 ай бұрын
@@craigkilling9021 turn those gators into gatorade!!
@craigkilling9021
3 ай бұрын
@@TJBRUTALCUSTOMS 🤣🤣🤣 I’m bout to turn this nightmare into a wet dream for sure.
Do you think i could mount this to a vt1100 im not seeing many options for that bike?
@TJBRUTALCUSTOMS
3 ай бұрын
As the stock 1100 sits no, but if you were to cut a lot off and fabricate a lot more, anything is possible.
In your video you say the fender is roughly 9 inches wide. On your website they say they are all 7". Do you have a fender thats 8" or 9"? I have a 200 rear tire that Im trying to fit. Thanks
Fuckin beautiful work
@TJBRUTALCUSTOMS
3 ай бұрын
Thanks so much! and thank you for the comment!
Can you install the fender/sissy bar combo if you keep the mono-shock? In one of your previous videos you mentioned not to install a sissy bar on the swing-arm if you keep the rear shock because of the tuning fork effect
@TJBRUTALCUSTOMS
3 ай бұрын
Eh, you can but there's risks Watch this and choose for yourself - kzread.info/dash/bejne/i6CXq7KvkbfWg7A.htmlsi=bjQf-RKZ1qwV-VP0
my country sucks, it doesnt allow to drill into the frame itself or weld any shit directly on it. do you have another idea on how we could accomplish that fender and Sissybar? thanks for the help
@TJBRUTALCUSTOMS
Ай бұрын
become ungovernable. do what you want.
@matforbes1
4 күн бұрын
This is the best answer @@TJBRUTALCUSTOMS
Can you run a tc bros hardtail cobra seat on one of these? Looking to go mono strut and this bolt on fender route
@TJBRUTALCUSTOMS
3 ай бұрын
with this setup, you might need to weld in a seat support. Our 50% hardtail kit would be a bit more ideal id think. The seat might need some flexing of the seat pan to get everything to line up the way you want.
Hoping you can help me out hard tailing my 93 shadow 600 gravity feeding the tank and removing fuel pump. Can I then remove the wires for the fuel pump and fuel pump relay back to the main harness without issue? I've been searching for info on it and can't seem to find it.
@TJBRUTALCUSTOMS
3 ай бұрын
just unplug it and see what happens! if it runs fine unplugged, (which it will) then you can trim your wires back. make sure to terminate the wires so they dont contact anything and dont allow moisture in!
@freeagent8891
3 ай бұрын
@@TJBRUTALCUSTOMS appreciate it so much I kinda figured it should run but seeing it was tied into the coils I wanted to make sure it didn't affect those as well. As far as my connections go everything will be neatened up and all connections are going to be twisted then have the solder shrink on them
A Carrrboorwaittor 😂
@TJBRUTALCUSTOMS
3 ай бұрын
😂
@TheArtisanTouch
3 ай бұрын
@@TJBRUTALCUSTOMS you have won doe’s do ya 😆 jk
Single carb
@TJBRUTALCUSTOMS
3 ай бұрын
lampshade.
Hello sir i live Cyprus and i need the fender brackets from you but no send Cyprus
@TJBRUTALCUSTOMS
3 ай бұрын
Sorry man! There's just some places we can't ship! :(
@eirinaiosvorkas5939
3 ай бұрын
@@TJBRUTALCUSTOMS i understand now need make brackets
Its a carburator?
@TJBRUTALCUSTOMS
3 ай бұрын
Well, yes, but I'm looking for specifics lol
Downdraft carburetor
@TJBRUTALCUSTOMS
3 ай бұрын
Mexican computer party
"Precio" It literally means "at a cost" lmao
@TJBRUTALCUSTOMS
3 ай бұрын
wrong spelling bud LOL! - pressio meaning as fulcrum or lever from the way the kit allows one to maneuver the fender easily to install.
@chrisdaniel7619
3 ай бұрын
@@TJBRUTALCUSTOMS I knew something had to be a little off but it was still funny lol
@TJBRUTALCUSTOMS
3 ай бұрын
@@chrisdaniel7619 I'm secretly naming products "too expensive" and "stop being poor" lol
It's a fuckunator
@TJBRUTALCUSTOMS
2 ай бұрын
Best at the fuckity fuck show
It looks like your middle finger...
@TJBRUTALCUSTOMS
2 ай бұрын
oh my!!! LOL
Single Carb! Rochester Monojet
@TJBRUTALCUSTOMS
3 ай бұрын
Hmmm maybe not? It does say rochester, but I cant find anything online that looks similar to this though. Any further details?
@craigkilling9021
3 ай бұрын
@@TJBRUTALCUSTOMS looks like an old 1980’s carb that went on the 80’s ford f150 but, I believe they may have retro fit them to some Harley’s as well.
@TJBRUTALCUSTOMS
3 ай бұрын
@@craigkilling9021 it is def not from a motorcycle. I promise lol! And it's got a lot of copper plumbing I can't find any info on online
@craigkilling9021
3 ай бұрын
Rochester 1MV Monojet 7045010, 7045013 & Others CARBURETOR, 1975-76 Buick, Chevrolet & Truck, Oldsmobile, Pontiac 250" that’s the closest one I can find that looks like the one in the video. As far as the copper tubing. Definitely unsure of that. But it’s certainly an oldie.
@TheWrigleyKid
3 ай бұрын
Can you install the fender and sissy bar and keep your mono shock? In one of your older videos you say not to install a sissy bar on the swingarm because of the tuning fork effect. I know the site says you can but want to make sure