⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzread.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@deasttn

6 жыл бұрын

Nicely done. I added due to my system and it appears to be leaking around the compressor and/or where the hoses attach to the compressor. I'm going to pressure wash the engine bay and see if I can pinpoint where the leak is.

@kangokidkidd4037

4 жыл бұрын

You guys did not mention anything about releasing the pressure on the a.c. lines...

Thanks so much guys, I couldn't get the compressor out until I watched your video. Thanks so much!

I learned the hard way a long time ago, but you never wear rings when you're doing automotive work... Still have all my fingers, but had a real eye-opening experience that day in the shop...

@neverstoplearning382

5 жыл бұрын

Ring, watch, chain and all that out of the way. Regards.

@ninjaxorgmail

4 жыл бұрын

Aside from being dangerous it all gets scratched up and looks shabby after a while

@heroesgonewild

2 жыл бұрын

Nice watch though.

@ApEsXiT

Жыл бұрын

De-glove is the word you’re looking for.

This is one heck of a video, THANKS!! Not my exact model but I see how it's done. Thanks for reminding people to not drop their suspension out the bottom haha

Excellent video cinematography. Thank you. I won't be doing the job myself. But, it helps to know what my beloved mechanic Ken at K&K Automotive in San Carlos, CA will be doing when I request it, because my 2010 Honda Odyssey AC freon seems to need recharging after only 1.5 years since its last AC leak test and freon recharge. Now 1.5 years later Ken tested the AC system for leaks and found none. He recharged it and now it blows cold. But, he said that there is a chance that the AC Compressor itself is leaky and may need replacement when it stops blowing cold in another 1.5 years or so down the road if not sooner.

Two thumbs up!! This is, by far, the quickest way to remove the compressor I've seen yet. Thanks for the vid! you've saved me time!!

Thanks for the video guys. Very helpful to know which way the compressor comes out

Sup guys ? Video was helpful. Just wanna comment on my experience. Instead of taking the piece from the frame. I took ac compressor off moved it to the front of the car . Then i took the plate where the ac compressor itself is bolted on 4 bolts the athe bottom bolt for the alternator then the whole plate with the tensioner comes right out really easy all this is done from the right side of the car so i did remove the wheel. Then theirs alot of space for the ac compressor to come out easily. Might sound like a lot but if u already this deep into it shouldn't be a problem. Made my job really easy. Thanks for your video help me alot .

@ninjaxorgmail

4 жыл бұрын

Great tip

Thanks alot!! I'm about to do one. I was looking at it like NO WAY!!! BUT NOW IM CONFIDENT

thank you very helpful, yes take the 2, 17mm bolts must be removed to twist support arm in order to get the compressor out. to put the new one on angle the pulley in first then twist and turn stay with it cause there are times you think it will just not fit . Thank you again.

Thanks for the video...I’ll be working on this project this weekend saving some major $$$$

@mrg466

3 жыл бұрын

I thought about doing this too, being that a need to do the alternator anyways,...but then,...after I found out, that the air compressor cost over$300 dollars, ...well that's just too much price and hassle,...I rather just get a plug adapter and plug in a fan.

Very helpful and informative. Nice video

I always do the belt removal from the top. First remove the engine cover. Next, use a 19mm socket and push it toward the firewall with one hand, remove the belt with the other. Helps to put a cheater on the ratchet handle.

@mrg466

3 жыл бұрын

What's a cheater? Beside a unfaithful person,..that is.

@JustEnjoyingLife73

3 жыл бұрын

@@mrg466 A pole that fits on top of the handle of your wrench to increase its leverage.

@mrg466

3 жыл бұрын

@@JustEnjoyingLife73 ok, that's exactly what I had to do, thanks!

@matthewward3021

2 жыл бұрын

I've done this too, works great if you're solo. Just have to be careful not to strip the nut if it's a cheaper tensioner... I've had that happen too.

Thanks for this - gotta do mine today - couldn’t be happier with this video - excellent job!1

fyi, I had a 2005 and the compressor barely fit out of the bottom. I ended up removing the radiator (partially, I left the transmission lines attached and just moved it far enough out of the way that I could fit the compressor in from the front). It was SO much easier than wiggling it up through the frame. I recommend removing the radiator. Saved me hour(s).

@Maxumized

5 жыл бұрын

That’s how I did it. Gotta get the radiator out of the way

I like these guys and they've helped me with a couple things, but they are wrong about removing the compressor. Don't mess with the suspension brace bolts! Since you already have the serpentine belt off, go ahead and take off the tensioner--the compressor slides right out through the wheel well.

@rmisa14

3 жыл бұрын

It’s the same thing there’s no right or wrong the bracket is more convenient

@rmisa14

3 жыл бұрын

It’s not like it’s going to unaligned

@aparker2997

Жыл бұрын

Removing the tensioner is 100x easier. I did it. Dragging that out through the brace is a nightmare - they edit out the struggles.

@aparker2997

Жыл бұрын

Dragging out thru the brace, all the oil drips out as well in addition to being hell to get out.

@versitell848

Жыл бұрын

Soooo, I originally took it out like these guys, took a minute. Then I thought to remove the tension pulley for the “easy access” and negative. It was a nightmare that way. I ended up putting back in like the video. Lol

I have a Mazda CX7 2008. My AC stop cooling then when I did a visual inspection on the compressor I saw one part of the compressor off. I think that part is a AC clutch. The bolt is missing but the part is attached but separate. So I Know the bolt is missing and I don't know what else is missing. Also I don't know if I need only put another 10mm bolt and my AC will be fine or if I have to replace the whole compressor.

Can you show an uncut video of the full removal of the compressor as well as the installation of the new compressor? I don't see how I can install the new one threw this opening without damaging it or spilling the oil. Also, it would be nice if you discussed how much oil to add. This video is strictly a removal video, not a replacement video. I committed to your advice and now I feel like the only way to install the new compressor is by removing the radiator as other youtube videos suggest. Help!

I like this guy's skill.

Thank you! Great video!

Great video thanks guys!

this was very helpful .....Thanks..........

I did it my self taking belt out and changing alternator and tensioner. The first thing you should do is to take out the plastic cover from the engine

There is a step in my Haynes manual, says to drain the oil from the compressor to determine how much oil to leave in the new one so it is not overfull. Do you have a video on that process?

Great video guys good job!!

Not sure how you got that out without taking off the tire I applaud 👏 you

thanks for sharing. take care from Tn.

Wow I had no idea you can take it out for the bottom. I was doing a 2002 today and I taking everything out from top

...so in other words, go to a mechanic? Got it. lol

@carlgothard9644

3 жыл бұрын

Nah... it means go to auto parts store buy the parts and tools needed and do the shit yourself. Simple as that. But yeah, take it to mechanic. Because we love doing these 20 min jobs and charging $500 +. . Love it when people are allergic to tools and/or work..

@deionford9215

Жыл бұрын

It really isn’t that hard

@jeronimoserrano2118

Жыл бұрын

L lo

@alexmaness4138

10 ай бұрын

If your incapable yes

@alexmaness4138

10 ай бұрын

​@@carlgothard9644dude's probably still sucking on his grandma's tit

How do you remove freon without a vacuum? Is there a way to do it by hand?

Thanku God bless you

Good job, thanks !!

is there a reason you didnt swivel the lower support bar away first and then try to remove the bolts????? seems this would be much easier..

Can I do this work on a Honda odyssey 2000?

thank you sooo very much

Thanks very much

useful. thanks.

IS there an orofice tube in there?

do you have to let the freon in the system out first, so the system doesn't blow up in your face?

Looks like a pain in the ass no matter which way you go but not near as bad as I thought it was. I will be doing mine here shortly thank you very much great video.

@johnphenglavanh7441

5 жыл бұрын

I took the pulley out first and it was easy to remove using this method. Didn't have to wiggle like crazy.

@masterpanther1

5 жыл бұрын

@@johnphenglavanh7441 interesting...

Evacuating and refilling the system costs $139 at Jiffy Lube in San Diego 9/22/23. That way you don't need any of the evacuation tools.

Looks a little complicate buy with your videos, i can do ,thanks bro

IS NESSESARY TO PUT GOLD RING WHEN YOU WORKING UNDER A CAR? PROBABLY GIVE YOU MORE LUCKY ????

Nice video guys :)

nice watch

@soyeldiego4878

6 жыл бұрын

Dj Cali-Marz I would not be sporting this watch doing this kind of work afraid scratching it.

What about the accumulator?

Thanks

Buenos días Cuántas onzas de aceite lleva el compresor del aire acondicionado Honda Odyssey 2005 le voy a cambiar el compresor nada más

@alexanderzamorachacon5386

6 жыл бұрын

Quiero poner un equipo auxiliar en donde va el dvd se puede hacer

@randygonzales6559

5 жыл бұрын

Cuantos galones de agua llevan las llantas

hi where i can find 2003 honda odyssey ac expansion valve

@cliffodell8593

5 жыл бұрын

RockAuto.com

Hi when I do vacuum to the system How to add all for the compresor Or Not

@Eli_is_a_Lauver

4 жыл бұрын

When I do the vacuum to the system I have to add oil on the compressor or no

Good job 😍i’just replace pulley with the magnetic saved me the money if ac work they just magnetic not working take me 2 day hard time just take the safety pink of and on...🤫🤫🤫😍

@mrg466

3 жыл бұрын

What are you talking about? Replace pulley with magnetic?

@JustEnjoyingLife73

3 жыл бұрын

@@mrg466 I think he's talking about the clutch. That's the part that often fails.

Sir, nice watch it might scratch wow😮

Hi can you please tell me which compressor the vehicles comes with ?

@TheNachoDaddy

5 жыл бұрын

Honda Part No.: 38810-RGL-A02

@john-qb7lv

Жыл бұрын

It's a Denso. Rockauto has them.

One did you evacuate the refrigerant? Two did you vacuum the system. Did you change the desiccant? Kind of hacks guys....

How do you switch out the AC accumulator/drier?

@dedwards8893

6 жыл бұрын

Just watched the video and I'm wondering the same thing. Did you figure it out?

@FixItYerself

6 жыл бұрын

replace the condenser. it comes with the dryer and desiccant bag

Great video but Dude Seriously loose the ring and watch while working on things.....😳😳☹️

@johnbrooks7144

3 жыл бұрын

lose the ring agree.

Just put it back in the same way it came out? Did you get a good laugh over that after the camera stopped rolling?

I like how you skip the actual removal. Why? Did the frame have to come down? That's deceptive and you know it

@7:56

You dont need 2 people to take out the belt

At 7: 50 u guys edit the video so im not sure if u guys get it off easily that way.

In mother Russia, we replace AC compressor when it sounds like Ak 47

@m.vasquez2640

4 жыл бұрын

Kuchlicuf

@john-qb7lv

Жыл бұрын

We also wear lots of bling

And how the FUCK do we pressure down the system lol

I am going to do this with my in law. Mechanic wants 1700 for the job lol

People here makes things 100 XX harder that they really are talking about comments

How much does it cost for those kinds of jobs?

@Pinoy915

Жыл бұрын

Roughly 800-1500.

cheater u edit the video

Horrible ending we could tell you didn't know how pull it out fram changes after your dad did it lol

I think I'll will pay somebody?!?

Step one: remove watch :P

You should not be wearing such a nice looking watch while doing this job or you will scratch it.

Take your watch off

That look totally fake. Taking it out at the end there

BS Biden Ad