Honda CRF300L / Rally Chain Replacement with Tool Sizes and Torque Specs (Riveted Master Link)

Автокөліктер мен көлік құралдары

How to replace a motorcycle chain with a rivet style master link.
NOTE:
If your chain is too tight or too loose it will wear out faster and could damage other things in the process. Make sure to keep your chain clean, lubricated, and within the suggested slack range.
LINKS:
Buy a shirt!: endless-money-pits.myspreadsh...
New chain: amzn.to/3GTPUeo
Breaker bar: amzn.to/3Hqibsl
Torque Wrench: amzn.to/3HqCZjq
Socket wrench set: amzn.to/3EP9kBW
24mm socket: amzn.to/3Ci5YWf
Wrench set: amzn.to/32T9pE2
Tape measure (SAE): amzn.to/36Fd3TX
Tape measure (metric): amzn.to/3Lnw8bO
Angle grinder: amzn.to/3DoTbAI
Chain tool: amzn.to/3HI5CbJ
Rags: amzn.to/3J6prtT
Gloves (nitrile): amzn.to/3IUg00c
Gloves (padded): amzn.to/36WLk1b
Safety glasses: amzn.to/35AO9ns
Ear plugs: amzn.to/3SKyDIx
Motorcycle stands: amzn.to/3rv1gyA
Amazon Prime Student Discount: amzn.to/3YzZNXk
Amazon Prime Discount for people with SNAP, Medicaid, etc.: amzn.to/3sfQpvW
Want to help the channel grow?
Support me on SubscribeStar: www.subscribestar.com/endless...
Support me on Patreon: / endlessmoneypits
Check out my merch!: endless-money-pits.myspreadsh...
Or make a one-time donation: paypal.me/EndlessMoneyPits?lo...
TOOLS AND SUPPLIES USED:
• Breaker bar
• Torque Wrench
• Socket wrench
• Short socket extension
• 8mm socket
• 24mm socket
• 17mm wrench
• 14mm wrench
• 12mm wrench
• 10mm wrench
• Tape measure
• Angle grinder
• Chain tool
• Rags
• Gloves
• Safety glasses
• Ear plugs
• New chain
Music not provided by KZread:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
*Disclaimer*
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Пікірлер: 23

  • @vr6muppet
    @vr6muppet Жыл бұрын

    Nice job, I'll be back to re-watch when I'm due for a chain. : )

  • @perryderrenbacher7133
    @perryderrenbacher7133 Жыл бұрын

    Extremely well done video!!! I love that you added torque specs, sizes and tools right into the video. I wish every how to on KZread was like this!! I'm definitely subscribing and look forward to more videos!!! 😁

  • @EndlessMoneyPits

    @EndlessMoneyPits

    Жыл бұрын

    Thank you for the support! I started this channel because I was tired of videos that left out important information like that. This is the way I think it should be but most channels probably don't have the time and patience for it. Thanks again!

  • @foufoufun
    @foufoufun2 ай бұрын

    Nice video, I'm preparing to do my first chain replacement.

  • @foufoufun

    @foufoufun

    2 ай бұрын

    @@EndlessMoneyPits oh my bad, fixing my comment.

  • @spalm5229
    @spalm5229 Жыл бұрын

    Nice video. In my experience it is always important to change the triptych (chain, sprocket and crown) because if you change only the chain, high risk to wearing it out irregularly.

  • @EndlessMoneyPits

    @EndlessMoneyPits

    Жыл бұрын

    I would typically agree but these sprockets only had 400 miles on them and looked brand new. Decided to just do the chain this time.

  • @spalm5229

    @spalm5229

    Жыл бұрын

    @@EndlessMoneyPits subscribed!

  • @EndlessMoneyPits

    @EndlessMoneyPits

    Жыл бұрын

    Thank you!

  • @lukestringer2177
    @lukestringer2177 Жыл бұрын

    the ERVT model / 520 DID / it's the BEST X ring CHAIN for the 300L - Rally ( perfect choice )

  • @EndlessMoneyPits

    @EndlessMoneyPits

    Жыл бұрын

    I think the owner got it from that CRFs Only website.

  • @lukestringer2177

    @lukestringer2177

    Жыл бұрын

    @@EndlessMoneyPits I've been" wearing" this chain 6 months ago and I bought another one to keep in garage. GREAT CHAIN

  • @carllaprise8169
    @carllaprise8169 Жыл бұрын

    Thanks for this video, i was wondering if a little wiggle on the front spocket is normal?

  • @EndlessMoneyPits

    @EndlessMoneyPits

    Жыл бұрын

    Yes, apparently it is. They call it a floating front sprocket but I had never seen one before either.

  • @240LTS
    @240LTS Жыл бұрын

    ... Great video!! I bought the same bike (a lightly used 2021) on 5/31/23. Subscribed with a bell. Why not use a master link for easy removable if you need to take it off? I rode from 1969 - 1985 and all my chains had master links. Is it now the norm NOT to have master links? Maybe it eliminates the possibility of having the master link failure on rally, dual sports and ADV bike while out on the trail? Thanks, . Jeff .

  • @EndlessMoneyPits

    @EndlessMoneyPits

    Жыл бұрын

    A clip style master link should be fine for this bike. I have heard rivet style is recommended for bikes 500cc and up. I did a rivet link on this bike because the owner requested it, but I don't remember if he had a specific reason for it.

  • @reg26
    @reg26 Жыл бұрын

    What did you use to clean the grease of the new chain?

  • @EndlessMoneyPits

    @EndlessMoneyPits

    Жыл бұрын

    Kerosene

  • @bawtrlfg
    @bawtrlfg10 ай бұрын

    Anybody knows torque spec for front sprocket bolts?

  • @EndlessMoneyPits

    @EndlessMoneyPits

    10 ай бұрын

    It's in the video. 4:35

  • @bawtrlfg

    @bawtrlfg

    10 ай бұрын

    ​@@EndlessMoneyPitsyeah, thank you, I must be blind , sorry 😀🙂

  • @markseymour2833
    @markseymour2833 Жыл бұрын

    Load of rubbish. Kerosene on the chain removes and dilutes the grease. Second, do not use a tape measure, use a steel ruler on the swing arm, NOT the chain guide and measure to centre of the link. All of this is in the Honda owners manual. This guy is talking rubbish.......

  • @EndlessMoneyPits

    @EndlessMoneyPits

    Жыл бұрын

    The owners manual says to use kerosene for cleaning the chain. Honda is not alone on this. Grease is sealed inside the chain with o-rings. If your o-ring seals have gone bad, the grease will be flung out at speed. No need to worry about diluting grease that doesn't exist anymore. Once the o-rings start to fail, the chain will need to be replaced. A discussion on where to measure the chain has already been covered in the pinned comment.

Келесі