Thanks brother for this. I'm no mechanic but after watching your video, I'm now a certified mechanic.

@TheGerbsteve

2 жыл бұрын

Neither am I… you have officially been certified lol

@characterovercolor6537

Жыл бұрын

​@Gerb Productions I just purchased this same car(what yearisyours)...needs a lil tlc,hopefully when I finish. May be similar to yours.

I’m glad you said what tools we needed and really a step by step💪🏽

I just pressed out the bearing and reused the pulley body. $12.50 for the bearing. Thanks for the videos- they have been quite helpful.

And Gerb saves the day again, thank you.

@TheGerbsteve

6 ай бұрын

No problem man 🤙🏼

This was really helpful thank you man .

Thanks for the video man good detail and information

Thank you for the video man! It was helpful!

@TheGerbsteve

3 жыл бұрын

Glad it helped!

Great video this helped me out a lot 🔥👍

@TheGerbsteve

5 жыл бұрын

Np my dude 🙏🏼

Thanks for the video, the cracks are not a big deal unless pieces start falling off. There is a wear/stretch indicator on the tensioner. A small triangle points at a rectangle, if it's stretched too far the triangle will point outside that rectangle part of casting. But such a cheap and easy maintenance item, may as well do it at 100,000 or so and keep old one in with spare tire for emergency spare if regular one snapped due to some reason.

I’m gonna make a video of my 09civic si soon on my channel. I love this car!😃

Gracias por el video me fue de mucha ayuda

changing my belt for the second time, my oem crapped on me :S im glad i have this video to refer back too

@madam497

2 жыл бұрын

hi we meet again lol. my crankshaft pulley dryrotted and took my belt with it. lol

I recently changed my idler pulley and wondering why my belt is moving a little from left right ther is no vibration or noises though

Great video.

@TheGerbsteve

3 жыл бұрын

Thank you 🙏🏼

FWIW on the tension assembly there is a little index pointer, and it points to a little range "rectangle" showing if the belt has stretched too much. as long as pointer is still in that range even with some minor cracking of ribs you should still be good. If there were areas of the ribs missing then I would do it for sure. The real strength is in the fiber woven and reinforced flat part of belt. But it's such a cheap easy repair no harm in doing it proactively.

@MugenASMSi

3 жыл бұрын

I noticed that there are two rectangles one higher than the other. Which of the two would indicate if the belt has stretched ?

@BurkaLifter

Жыл бұрын

hahahaha, I just posted that exact same thing. agree 100% cheers !!!

DAMN BRO THOSE WHEELS ARE MINT!

@TheGerbsteve

5 жыл бұрын

Thanks bro ski 🙏🏼

Thanks for the video Gerb. How long did you have the gates belt on for? Do you think the pulley wore out the belt faster?

@TheGerbsteve

5 жыл бұрын

I’ve had it for about 3 years.... I think that the idler tightened up somehow and wore out the belt. Plus being in cold and warm weather doesn’t help much either.

Good video 😎

@TheGerbsteve

3 жыл бұрын

Thanks for the visit

i just replace the bearing but i like your vid

Going to replace my belt when it arrives. Thanks for showing everything so clearly! This is a really helpfull video. I did order a cheap tool to help me out releasing the tensioner pulley. Looks that you removed some plastic parts.. did you need to remove any plastic covers and is it required to get the belt on there ?

Getting the new belt on is always such a hassle for me. I took the old one off 3 times and was able to put it on no issue but whenever I get a new belt it’s such a pain in the ass I usually have my brother help me get it on

@TheGerbsteve

Ай бұрын

It can be, but usually takes me like 20 mins or so to do. I've also done it like 6X lol

Next time bro set it up and start on the top make sure youre holding on that tensioner and line it up last on the crank pulley

Need to grab me some ud pulleys when mine ends up being swapped. Though this one on the fa5 maybe newer

@TheGerbsteve

5 жыл бұрын

I looked into them awhile ago. I’m just gonna wait until I get my k24 😎

Is the Honda belt quieter? I noticed a kind of low toned cycling noise with the gates belt when I changed it a good while ago. The kind of noise only the driver of the vehicle would distinguish cuz my wife couldn’t notice it.

@TheGerbsteve

5 жыл бұрын

Yes. Honda belt seems to be quieter and more quality. We shall see how long it lasts 🤙🏼

The grass has always sketched me out bro. Car might sink or something. Hopefully you get that storage

@TheGerbsteve

5 жыл бұрын

Either that or lay some plywood down 🤣... But seriously, I need a unit 👌🏼

Where did you get the sun screen from for the windshield? Been having a hard time looking for one

@ogkrillin9834

3 жыл бұрын

Amazon my guy

Hi I have a question did ever figure out what wus the that sound that the honda made.....

@TheGerbsteve

4 жыл бұрын

Well, I had a bad ac compressor, bad idler/tensioner pulley, and starter, so i replaced all of those items. Now I believe that my alternator is on its way out.

@Gerb Productions how long does this take to install??? 30 mins?

@TheGerbsteve

6 ай бұрын

20-45 depending how fast your are

gerbbbbbb

@TheGerbsteve

5 жыл бұрын

Yoooo

What type of fuel do you put into your civic si?

@TheGerbsteve

5 жыл бұрын

91 or 93 octane

This is super super easy compared to the non SI civics. I’ve seen people have to remove alternators, water pump pulleys, wheels, even remove motor mounts and raise then lower the engine. Sheesh

@TheGerbsteve

4 жыл бұрын

I’d have to agree with you on that! On my 2001 civic, you need to remove a ton of crap. The hardest part about this is getting it back on because the belt and pulleys are sooo tight under there.

What key number do I use to move the tensioner

@jayc4283

Жыл бұрын

the one he says in the video

Get a bando one. Honda uses bando belts for oem and are cheaper

Are you using OEM belt and idler and alternator?

@TheGerbsteve

2 жыл бұрын

Yeah, everything is oem

Hey mate, can you adjust the tensioner? I think my belt is too tight.

@BurkaLifter

Жыл бұрын

No, it's a spring loaded tensioner. if tensioner can move freely, it can't be too tight

@melvinjubay

Жыл бұрын

@@BurkaLifter my tensioner is still out of the recommended line. I just live with it, so far all good.

@jayc4283

Жыл бұрын

@@melvinjubay If it's outside the line, then I would assume the belt is stretched past it's recommended wear limit. The only way it can be out in the tight direction would be if a non-stock pully was on one of the accessories, or the wrong belt was previously put on. I would not sweat it if it's close, but it's such a simple and cheap thing to change. for $25 I would just put a new one on.

@melvinjubay

Жыл бұрын

@@jayc4283 nah mate I just replaced the belt. I replaced the belt and it was out of the line on the too tight side then I replaced the pulleys hoping it was the problem but it’s still the same. I really think it’s the belt but I couldn’t be bothered now , made 70k kms with it already.

Hi friend what is the number or code of the band?

@BurkaLifter

Жыл бұрын

it's in the video, hit pause

What wheels do you have for your car??

@TheGerbsteve

4 жыл бұрын

Xxr 527’s

lol says v belt on the package that’s funny

Careful bro super sketched seeing you work on dirt.

Definitely go easy on that idler pully bracket, I busted mine when doing an ac delete on my ep3, ended up being like a 70 dollar part online.

@TheGerbsteve

5 жыл бұрын

Where’d you end up buying it?

@miatafan

5 жыл бұрын

Gerb Productions www.hondapartswholesaledirect.com Honda parts now is another good one, you could probably get it cheaper if you shopped around or bought a used one from a pull off, but I needed it quick so new was the way to go

good lord, you have to wrap it around a ton of pulleys

@TheGerbsteve

5 жыл бұрын

Ik man... water pump, ac compressor, crank pulley, alternator, idler, tensioner haha

did they have the belt in stock at honda or have to order it?

@TheGerbsteve

4 жыл бұрын

Honda Dealers should have it. The one i went to had mine

how many miles on her?

@TheGerbsteve

5 жыл бұрын

192k 💪🏼

@johndough27

5 жыл бұрын

Enough he should get a k24

@TheGerbsteve

5 жыл бұрын

Yes I should 💪🏼

Lmfao all my tools (one ratchet and sockets)

@TheGerbsteve

4 жыл бұрын

🤷🏼‍♂️