What a beautiful bike! She's gorgeous.

Hi. To drain the coolant system, you don't need to pull off the hose. The coolant-drainplug is the lower left bolt which holds the waterpump-cover in place. There are 4 bolts that secure the cover and the lower left bolt doubles as the drainplug. It is the only bolt there with a copper washer.

Very good work and nice edit!!!! THANKS!

@latzkoworks

Ай бұрын

Thank you very much!

Thank you

Great video, thank you!

@latzkoworks

Жыл бұрын

Thank you for watching!

honda master !

Fabuloso

@latzkoworks

Жыл бұрын

Obrigado!

Bien

@latzkoworks

5 күн бұрын

Merci!

Hello. Nice work there! I also wonder how you keep the gold wheels and spokes so clean looking??

@latzkoworks

Ай бұрын

Hello, the wheels were re-painted. I simply use brake cleaner spray for cleaning. Thanks for watching!

Hello. What repair kit did you use for those petcocks? The exact make and part-number(s) would be useful thanks.

@latzkoworks

6 ай бұрын

Hello, you can see it from 14:00, type was 4ride 60-1023, bought at the local shop.

Thanks for sharing! Which product(s) do you use for the ultrasonic cleaning?

@latzkoworks

3 ай бұрын

Hello, I use 50% distilled water + 50% water based cleaner fluid.

Thanks for the video. I have a rd03 and i have to do the valves adjustment. Do you know the spc? Intake valves: 0.13 to 0.17mm Exhaust valves: 0.18 to 0.22mm i only find this info but it is rd07 spec i dont know if it is the same. Regards keep the good work

@latzkoworks

Жыл бұрын

Hello, rd03 valve clearances: intake 0.15 exhaust 0.20mm. Thanks for watching!

I can see there is some oil at the bottom of the engine - near the water pump (even a drop hanging off the water pump). Did you figure out where it is coming from? My RD03 has the exact same and I can't figure out where it's coming from.

@latzkoworks

Жыл бұрын

Hello, in my case it was easy, the metal sealing ring under the oil drain plug was wrong. If it is okay you should check all the rubber O rings.

@alexandersotirov7607

Жыл бұрын

@@latzkoworks I have wiped around the drain plug, it stays dry. I have changed the valve cover gasket, seems ok. Checked the shaft seal (the shaft that drives the front sprocket) and that stays dry. As far as I know there are no oil pipes on the rd03, not like the 750s where there is an oil cooler. So I don't know what else to check now..

@latzkoworks

Жыл бұрын

@@alexandersotirov7607 it could be even the two allen bolt sealing ring on the left crankase cover, or the left crankase cover gasket, or the neutral position sensor screw near the front sprocket. I hope you'll find the reason.

Interessante per i rubinetti benzina…..quindi ab60-1023

@latzkoworks

Жыл бұрын

Parte non disponibile.

Szia! Szelepekkel kapcsoltaban szeretnék tőled kérdezni, ha lehet. XRV 750 RD07. Köszönöm!

@latzkoworks

Жыл бұрын

Szia, mi a kérdés?

@Waranus36

Жыл бұрын

@@latzkoworks Megirhatom e-mailben?

@latzkoworks

Жыл бұрын

igen, latzkoworks@gmail.com

@Waranus36

Жыл бұрын

Köszönöm!