Great video Larry. Good seeing you again.

@LarrySbrusch

3 жыл бұрын

Good to hear from You..Thank You. Appreciate the comment...stay safe

I’m rebuilding my wife’s gramps home made rig it has an old 230 GM engine running it. This video is helpful

@LarrySbrusch

Жыл бұрын

Thank you. Appreciate the comment

@rodneykilgore6591

6 ай бұрын

what is the pipe? black pipe? how about the couplers?

@LarrySbrusch

6 ай бұрын

@rodneykilgore6591 pipe is normal thick wall pipe .couplers are from a company in Houston, I think is was lone star drill bits

Excellent, just what i need!!

I am still working on building my own lol thanks for your help

@LarrySbrusch

4 жыл бұрын

I hit some solid rock at about 30 feet on this hole..will buy me a roller cone bit and try to drill past it a little quicker when the bit comes in

@MichaelBrown-lv1ks

4 жыл бұрын

@@LarrySbrusch well I haven't purchased a bit or swivel but I got the Derrick and stuff going

@LarrySbrusch

4 жыл бұрын

@@MichaelBrown-lv1ks send me some pics..txdashcovers2012@gmail.com

@LarrySbrusch

4 жыл бұрын

You came by my place one time, didn't you

@MichaelBrown-lv1ks

4 жыл бұрын

@@LarrySbrusch yes sir

how did you build your drill pipe.

What did you use for drill motor? Having hard time to find right one low RPM 150

@LarrySbrusch

3 жыл бұрын

I will have to check, but mine turns 152 RPMS..I believe it was a brand called Charlynn.. I will have to look at it, next time I get a chance to go put my eyes on it in the daylight

Can u show how u make the drill rods and were u got the threaded ends

@LarrySbrusch

3 жыл бұрын

Boze brothers out of Houston made the couplings. Bought 8 foot joints of heavy wall pipe , aligned the collars and welded them in place

Shalom Aleichem. I can barely hear him over that dog barking. Ratson haba b'shem YaHuah

@LarrySbrusch

2 жыл бұрын

Sorry about that. But we are a one man band around here and we have 5 shelter dogs. I will be making another video drilling a well soon as I build a sub to run a tri cone roller but in hard stone around 45 feet

could you take some Detailed pics of the rotary swival. Maybe I can figure it out from the pics. I would really like to build one for my water rig that i am building.

@LarrySbrusch

Жыл бұрын

I sold the machine

Very simple rig to handle. I'd like to build one. Would you be able to provide me details of the rig.

@LarrySbrusch

Жыл бұрын

Sorry, but I do not have any drawings

Curious what you constructed your drill pipe from?

@LarrySbrusch

2 жыл бұрын

I used heavy wall standard pipe and purchased M50 couplings then set the pipe in a jig and stick welded them. The first pipe I welded the couplings a little offset to create a small wobbling affect to drill a wider hole. It seems to work for me. Hope this helps

@LarrySbrusch

2 жыл бұрын

I forgot. I did have to machine a small amount out of the couplings to fit over pipe. Not much and it didn’t take long with my old victor 1640 lathe

what type of motor and gear reduction? what do you have for a water swivel?

@LarrySbrusch

Ай бұрын

The motor turns 152 rpm and the the engine is a 429 cc kohler engine. The swivel is custom made

Do you remember where you bought the pipe couplers from. Be cause i have searched and can't find anything.

@LarrySbrusch

Жыл бұрын

You might try Lonestar Drill Bits at near houston. If not try aliexpress, I have seen some on there

I like your little rig. I built a small rig to drill with the 4” casing. Just drill to the total depth and casing is already set. I made some videos. Come check it out.

@LarrySbrusch

3 жыл бұрын

What's the link to it

@jasongrinnell1986

3 жыл бұрын

kzread.info/dash/bejne/op2tsMOHqZvcpaw.html

Do you have contact information for the Boze Brothers that made your couplings? Only place I can find them is china. I live near Houston. Thanks

@LarrySbrusch

2 жыл бұрын

Try broze brothers. Maybe I spelled it wrong.? They are in the Houston area

How dip can you go with it?

@LarrySbrusch

5 ай бұрын

I only had 180 feet of drill pipe and used it all. not sure how much deeper you could go..But after the 200 foot mark you would need a bigger mud pump

How did you build your rotary jet swival?

@LarrySbrusch

Жыл бұрын

This would be something that I could not explain online..It took me over 4 months to figure it out

@robertpatton2140

Жыл бұрын

@@LarrySbrusch Well could you try to explain it to me?

Hi larry what size of engine did u use?

@LarrySbrusch

3 жыл бұрын

429 cc kohler command pro. Never have to run it over half throttle

Magkano po pagawa ?

my neck of the woods. How long did it take to put this bad boy together?

@LarrySbrusch

4 жыл бұрын

I had to figure it all out..planning was tough but I had about 4 months in it on and off

@LarrySbrusch

4 жыл бұрын

I have a video coming out Saturday .I just started drilling a well here on my homestead

@xstillox89

4 жыл бұрын

@@LarrySbrusch cant wait to see it. Whats the water table in the area? We haven't drilled ours yet. Looking for other options since a new well was about 20k.

@LarrySbrusch

4 жыл бұрын

@@xstillox89 I'm not sure yet.i went down to about 35 feet in a couple of hours making the video and it got dark on me..I hit a nice sand at around 22-30 feet..water probably not good at that point..will keep drilling until I hit the second or third sand

@masterphill100

3 жыл бұрын

Where did you get the collars?

How tall is that

@LarrySbrusch

29 күн бұрын

Around 16 feet tall

Great video!!! Can you provide me with your contact information? Whatsapp it you have. I really want to do one since it's very rear to find someone to dig a well. Please. I'd highly appreciate it.

@LarrySbrusch

3 жыл бұрын

You can get my number from the website at txdashcovers.com