I mean everything good and excellent with the device that he made ! But the best thing is how proud he was at the end with that huge smile !! Good for you man ! Made me happy ! 😊

@petiecoe5294

Жыл бұрын

Great job

@nycenj3974

Жыл бұрын

Very cool reply. This poor man must be married because you can tell that all we require is appreciation....

@ronjohnstonaustralia2417

Жыл бұрын

Yeah.... CleverClogs!

@adanmartinez8321

Жыл бұрын

Best thing over...Im OLD SCKOOL I always used my jack out my 76 monte carlo and it works perfect this is way easier tho nice job

@mich7689

Жыл бұрын

He knows how much money he is going to save from going to tyre shops .smart man 👍

Holy shit. We finally found something a scissor jack is good for. Well done young man.

@swarfs

10 ай бұрын

They are good for closing bent floor boards before nailing down too !!

@flightinseptember4438

10 ай бұрын

Aye man they save lives sometimes too🤷‍♂️

@zander2541

10 ай бұрын

my car is too low to fit a low profile jack under even with 2 2x4s on each side, but a scissor jack fits perfectly

@chrisbork6413

10 ай бұрын

@@zander2541 I don’t trust em with mine tho lol

@thatguyslush5779

10 ай бұрын

For reals!

People that engineer these things and build these little tools for their own use is amazing and I LOVE seeing things like this even if it's as simple as making a wrench to use in a tight spot. I'd rather watch videos like this all day and seeing someone genuinely happy of what they made than watch "influencers" ruin the future generation.

@user-tg5eh9rt7z

9 ай бұрын

U can say that again

@sousamecatronica

5 ай бұрын

Amen!

I have HELLA respect for a hustler that knows how to think outside the Box...👏🏾👏🏾👏🏾

@tonynichols309

10 ай бұрын

Hey if it works beats shop prices

@michaelreyes9997

10 ай бұрын

They been doing this on TikTok forever already 😅

@BigSleeps18

10 ай бұрын

Y'all just learn new words and throw them around anytime you want huh

@HolySpirit_7744

10 ай бұрын

@@BigSleeps18the fuck are you talking about

@mike5162

7 ай бұрын

But what is the point?

That smile at the end is the vindication for all the time spent staring at the corner trying to mentally figure out how to solve a problem. Good job son you got a W.

@uppercase5549

10 ай бұрын

🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉❤

It works but as a mechanic all I could think about with him leaning over the contraption was safety glasses.

@HardyAnnual

7 ай бұрын

If it failed I think the glasses would need to be pulled out of him.

I actually use my log splitter for this, and it works quite well.

That is some top tier red neck ingenuity and I'm here for it

@llamacebu216

7 ай бұрын

This has nothing to do with a redneck. None of this showed him being ignorant Redneck doesn't mean country. It's no different than a ⚫️ dude

@tex3302

7 ай бұрын

@llamacebu216 it's an expression redneck ingenuity, used for something smart being done with the wrong tools and it works

@randywissler9923

7 ай бұрын

​@@llamacebu216damn dude, it ain't that deep!!

@mike5162

7 ай бұрын

Sure but how is he gonna get the tire off and how is he gonna get a new one on?

@tex3302

7 ай бұрын

@mike5162 no clue wasn't there player

That bead held on longer under pressure than most my relationships.

@AllaboutTheWoodrows

Жыл бұрын

Ay 1psi wasnt too hard to beat 😂

@tomr6955

Жыл бұрын

@@AllaboutTheWoodrows lol

@AllaboutTheWoodrows

Жыл бұрын

@@tomr6955 my ex wasnt very supportive 🤣

@duffman1241

Жыл бұрын

Mint 👌🏻

@Mlive722

Жыл бұрын

@@AllaboutTheWoodrows 😆 🤣

This is got to be the greatest thing I’ve seen on here in forever. That nana smile said everything. I’m happy for you buddy. Smart man

I work at a tire shop and i absolutely approve!!! You can definitely make a rig for that tho if you dont already know what a machine looks like look one up and im sure you could get something going

@joemeyers4131

8 ай бұрын

Can i get shops to remove tire from Rim for free or trade or very less costing .. only want old steel rims all . Don't want to pay much ,, having no vehicle see .

Excellent 👌 we need more of these ideas to keep us busy at ER 🎉

@FOZ23

6 ай бұрын

Fr, i was thinking all that with zero protection

@Acceler2

5 ай бұрын

​@@FOZ23 tf he need a condom for😂

With a little refinement you will have a ready product that will not be able to stay on shelves. His enjoyment at the end is priceless

@southbound1969

Жыл бұрын

Until dirty China steals his idea.

@trashforky8848

Жыл бұрын

No copyright 😏

@southbound1969

Жыл бұрын

@@trashforky8848 Dirty China does not respect copyright laws or patents.

@yomama9062

Жыл бұрын

Nah frl make that shit pass whatever tf it has to pass for you to be able to sell that shit at stores my boy would make bank

@BenGoblin

Жыл бұрын

@@yomama9062 Tf you mean sell it he's just lifting his car with a jack on the tire lol

This is probably the smartest thing I've seen on KZread in a long long time

@thoggboogus2560

Жыл бұрын

Yea that hitch play is definitely gonna get worse smart but not the best

@JB-iw3ui

Жыл бұрын

😂😂😂😂😂😂😂😂😂😂 There’s a genius born every day

@jimoconnor6382

Жыл бұрын

Now someone is going to do this in a Walmart with no pants on! Now ya ruined it

@davidrule1335

Жыл бұрын

I just took mine to the tire store and set in the airconditioned lobby. I had a coke and a candy bar. It was awesome! Haven't had a Three Musketeers in a while. Oh yah, I watched some TV too.

@MissMichSan

Жыл бұрын

Facts! So refreshing to see people being people.

Adjust your mount higher on the hitch so that the jack is more stretched out. It will give it a lot more leverage and will stress the jack and your impact wrench a lot less.

@kylekrow5637

7 ай бұрын

Really. Couldn’t just say nice work. Typical npc

@ammielgooch4656

7 ай бұрын

@@kylekrow5637 😆

@kiilod6914

7 ай бұрын

No that would give it less leverage. Stop trying to use big words if you can't use them properly and also the stress on your tools will be the same cause it still will bear the same weight. By moving it up you're just adding more distance between the tire and the jack so in other words making a perfectly good design worse. Stupid wanna be engineer

@cone16v

6 ай бұрын

​@@kylekrow5637npc for giving him advice, youre the npc here lmao

@kylekrow5637

6 ай бұрын

@@cone16v bless you

I done tires for 45 years this is one of the best hacks I've seen! But forgot to wear his SAFTY GLASSES!

@esojanacig5138

7 ай бұрын

I agree safety 1st

Him “my schooling wasn’t a waste of money” as men we always feel proud of a new accomplishment. As fellow men we need to start helping each other reach goals and stop harshly putting other men down. We’re all bros in my mind

@Ken-1

Жыл бұрын

amen brother

@sidknee4975

Жыл бұрын

Didn’t learn that at school.

@tylershreeve6582

Жыл бұрын

Exactly

@treysimmons2589

Жыл бұрын

Facts bro!

@mastershan87

Жыл бұрын

Dad taught him that... schoolin is indeed a waste of money.

I have worked in many shops, changed semi trucks tires to go- carts and I have to say, GENIUS!! Hope you don't mind that I use this great idea...

@brianbutterworth8186

Жыл бұрын

Go right ahead that’s why I shared it

This has me thinking now. A high lift jack with the right attachment could do the same thing and not need an impact (though you don't NEED one this way). Awesome idea!

This seems like a good idea, but I would be kinda worried keeping my head so close to the jack. If something bends, snaps, or slips, that a hell of a lot of energy coming back at you. It would not only break your jaw, it would pulverize it into a powder.

@robbiet.8459

10 ай бұрын

It’s a jack… for a vehicle, a heavy one at that

@Kcanglers

10 ай бұрын

You kind of sound like a sissy

@SnoEntertainment762

10 ай бұрын

y’all must be too slow to realize this is no good if you can’t remount a tire or balance it. this is just a cheap way to throw out junk tires

@sergiv5613

10 ай бұрын

@@SnoEntertainment762 You're the one only retard here that even considered that as an option.

@muchgas

10 ай бұрын

​@@SnoEntertainment762looks like the contraption he made is serving his purpose 😂 but no way your goofy looking ass is calling people slow. You look like a twig crackbaby, get your hair line fixed that shit look rough... nice KZread bio too corny af 🤡

With a smile like that how could you not be proud of this man, excellent job 👏

@jessiedelacruz1631

Жыл бұрын

what job?

@SnoEntertainment762

10 ай бұрын

bro took the tire off for what? he can’t put on a tire or balance the wheel with this. still costs the same amount to go to a shop and have them remove the tires for you in half the time

Can we all just appreciate that a 1/4 impact was able to do that? Hats off to you DeWalt

@shaunharvey7690

Жыл бұрын

I’m shocked the chuck didn’t snap I wonder what brand it is

@waleedafzal3545

Жыл бұрын

@@shaunharvey7690 dewalt😂

@welchsgrape314

Жыл бұрын

@@waleedafzal3545 lol ppl slow asf

@richardmillhousenixon

Жыл бұрын

It's not that big of an achievement, the screw jack is doing most of the work. Turning the screw only takes maybe 20-30 lb-ft of torque.

@Scuba1Steve

Жыл бұрын

Hats off to whoever designed the jack. The half inch impact isn't doing very much work.

I love how you had to reposition it like 40 times just to put it right back where you originally started lol

Saving big bucks now, you’re a genius! Thanks alot dude👍🏽

I feel like I invented this in the 90s lol. That's how I used to break down my tires. Back of a vehicle with a trailer hitch, a scissor jack, socket wrench or power drill, and viola! But this guy went the extra mile to mount it and put the bead breaker on it and all. Nice job! 😎

@bray1461

Жыл бұрын

Shit we have put a piece of plywood down and ran over the edge of tire with a truck to break it loose

If “use what you got was a person” 😁 Good job brother!!

@robertmathews2158

Жыл бұрын

That is a great idea 💡

Been struggling with low pros all week. I'm making this as I type. Thank you a ton for this. Beats a manual bead breaker any day

This is literally what being a man is about Taking a complex problem and creating the easiest solution to fix it & when it works... you are damn proud!

Homie is so proud of himself. I love it.

He looks so proud and accomplished! Great job young man 👍🏽

Lmao what a genius, I’m gonna try to make this tmr

@topten7526

10 ай бұрын

Lmk how it goes

@rentacop577

9 ай бұрын

Did you make it?

@Browns4life

7 ай бұрын

He's still working on it.

My first set of new tires my grandfather showed me how to take tires off the rim with a bumper jack. Thanks for the memory and the much easier method. 👍👍👍

I see an engineer changing a tire w/ his homemade awesome contraption!

This is what I like seeing on social media. People actually using their brain. This is DOPE!

@GreenEagleVR

Жыл бұрын

Some people that live overseas want us dumb so this type of thing is not gonna be as promoted here unfortunately

@Michaelobama184

Жыл бұрын

Can you hook me up with some Dope

Great video. Love the smile at the end!

I used a lever fixed at one end to break beads. It was awkward and really hard work but having seen this brilliant tool that you have devised I copied it. Mine (or should I say, yours) is now bolted to a post of my 4 post car lift. works great..thank you clever man for making this and videoing it for us.

Wife sounds tired of it. "like you brought me out here for this crap, you could have just took it to the shop," GO"😂😂😂

There's nothing quite like the feeling of rigging something together out of what you have available, & then it absolutely working how you intended it to go...

Well done, you might round the bottom corners off a little before you use it to remove a tire that you might want to reuse . It looks so good that now I am thinking of making one . That would work on the difficult to remove from the rim Harley tires to.

@420Sean69

10 ай бұрын

Why but use the kickstand of the bike and the weight of the hog to break it loose?

Don't understand the neg comments, a little time with a chop saw and welder and you have a tool you can use forever- good job!

@josephl3602

Жыл бұрын

There are a few people talking crap about it. To be expected. Remember, KZread is watched the word over by the armchair "pros", and they all have an opinion to share... even if it's not requested.. You know the type. They say things like: "Stupid idea, bro... I would've done it like this". They're usually good for a laugh, so I guess they have some use.

A great modification to this is to add a foot, that way you don't lift the vehicle, my dad and I did this in the late 70s with a bumper jack,it works!!!!! Keep rocking brother, SUBBED

Mad respect brother, I can see the pride in your eyes!

That could be a life saver on the road or on the mountains of West Virginia!! I like it ! Keep going with this !! You are onto something.

that look on his face he's definitely proud of himself and what he's made

@chrisstaples703

Жыл бұрын

It was the first time one of his genius I ideas worked lol

I have an automotive repair shop with a tool that does this. It not only breaks beads, but removes the tire from rim, mounts and inflates too.

Thats awesome. Lots of setup time so assume you're doing more than one tire. Yesterday I used a Farm/High Lift jack similarly. Under hitch on one trailer tire. Removed and installed new tire. Used the fireball method to seat new tire on wheel. Quick and easy. But i do this every 3 or 4 years. This time bought used trailer and one tire was 18 years old.

Who else thinks this would be a good sell for this man ?

@kjc1878

Жыл бұрын

Point less you still have to balance the tires . On a machine

@contraband1543

Жыл бұрын

​@@kjc1878 just put balance beads in the tire moron

@kjc1878

Жыл бұрын

@@contraband1543 no dipshit not on cars dumbass

@hidros1461

Жыл бұрын

This is a good tool for scrappers that need to unmount tires off old wheels. Like myself

Great simple setup bro 👍would be especially useful for offroading. Nice work

@outinthesticks7235

10 ай бұрын

Beadlock wheels are the ticket

Finally, a KZread video worth watching

He's so happy!

You have a lot of trust in that one weld.

@kiilod6914

10 ай бұрын

Not really, if youre a decent welder you dont need trust.

@taliesinangling3564

10 ай бұрын

That one weld you can see from one angle

@lonnievinyard5204

10 ай бұрын

Also if the threads on the jacks rod break. Dangerous af

@kiilod6914

10 ай бұрын

@lonnievinyard5204 that jack can handle the weight of a car its not going to break.

@lonnievinyard5204

10 ай бұрын

Scissor jacks are not trustable

Neat and effective! Only thing is I wouldn’t lean in that far incase it breaks and flies up

You know many of them damn things I threw away in my lifetime 😂😂. Pure genius bro!! That’s American right there.!! 💯🇺🇸

About 45 or 50 years ago my father-in-law impressed me by breaking a tire bead by driving his truck tire over a tire laying flat like that.

that proud feeling when you done something great with diy only mens will understand

Me saying: Why didn't I think of that. 🤣 Great job brother. Desperate times, require desperate measures. Or just boredom.

I just used my pintle hitch , my cm flatbed and my floor jack to do 4 car tires and 2 zero turn tires ....work with what you got nice job!

Its insane how accurate he got this to an actual shop lol. Great job man

The smile at the end was like am I gonna get some tonight or what 😂

@juanmonzon1043

Жыл бұрын

Esa noche ceno Pancho

@blaccsilverstaff5484

Жыл бұрын

😂

Well done man! Thank you for sharing your idea. I'm going to make same one for myself.

That's one verifiable reasonable practical use for what I refer to sarcastically as rib spreaders

Rip impact battery. I bet this works even better with a pneumatic setup

👏 👏 now to put it back on

@robyparker2027

Жыл бұрын

Facts cuh how tf he gonna re-mount that shit 😂😂🥱

After paying what I paid this morning to have tires put on...this is gold. So simple but perfect. 👍

We salute you, sir.

I LIKE IT! Now I need to make that bead breaker easily removeable from the scissor jack, so the jack (yeah we all kinda hate them) is still useable as a jack.

What’s a life without a little sketch😂

Did this with a bumper jack and the driveway when I was 12,it's nice to see people who can think for themselves!!, subbed

@jimfox9951

Жыл бұрын

I have done this with a high lift jack many times. This way looks safer than mine by a long shot.

This summer, I had to take 8-10 worn out tires off some alum wheels so I could sell & I cringed at what it would cost. So, I went all shade tree & used some scrap metal, a few 4x6 blocks & my HF 20 ton press to break the beads. I figured there'd be stuff flying & butts a puckerin', so I got my wife to help. She always takes my mind off the sketchy with her general freaked outness, which is funny AF. But, it was all anti-climatic, worked slicker than chit & no flying projectiles. Was much quieter than a $3500 tire machine, too; just the chug chug of the air motor & the squeal of the jack, releasing the pressure.

Thats actually pretty genius

Кто не сталкивался,не поймёт!!!!Вещ, умна!!!Стоит для сосуществования!!!

I sure appreciate your creativity! I love people inventing things!

Awesome! 🙌👌 I particularly like the ending and the dude be smiling like “look what I can do” 😂

I drove to the shop got all 4 changed while watching this.

The way he smiles at the end like he is so proud of himself 😁

@stinkmeaner3016

Жыл бұрын

And rightfully so!!

@kingpin1l

Жыл бұрын

My thoughts exactly lol

Nothing more happy than when something you thought of and put time and work into making works and success keep it up

That is a perfect idea for the person who does it themselves like me, thankyou!

That multi bolt pattern chrome wheel is all I needed to see.

His smile said it all. Give a creative dude a welder and a tap and he can have some fun.

шиномонтажники прослезились!)))

@hedgehogfog4622

Жыл бұрын

В полях прокатит

@rifej

Жыл бұрын

А по чему слезы то лить? Тут иногда станком отжать не получается, не то, что этой игрушкой.

@chidieberechidie303

Жыл бұрын

Good i idea

@cadillachernandez2271

10 ай бұрын

​i wanna ride in tha fields!!!

He was so excited about this the whole way through. I love it

@videofantomes

Жыл бұрын

Like a child 😄😄😄

Just be careful, things can snap at that amount of weight. Wear safety glass a small piece of metal can fly out when something breaks.

@fuse911

Жыл бұрын

Nothing is gouna break buddy

@lemonaid8678

Жыл бұрын

Nothing there to break little fella.

@94XJ

Жыл бұрын

​@@lemonaid8678 ehh, I dunno. Those welds look like they're sitting on top of the metal, not much penetration. Either way, using a high lift jack and block of wood under my bumper is just as effective without having to carry an extra piece of gear with only one use on the trail. *shrug*

@lemonaid8678

Жыл бұрын

@@94XJ oh we have a weld expert here, they should hireyou as an inspector they could save tons of money by just video chatting with you, you could inspect welds all across the country from your own home. Must be nice to have such skill that you can tell how good a weld is based on a video that doesn’t even show them close up.

@AlexRides808

Жыл бұрын

​@lemonaid I was going to say "shut the hell up" but your response was funnier.

how my pops taught me to save money this video is gold

And you can take the tire right off the truck since it jacked up now! Genius!

What great idea but I just drive over the edge of tyres with my car it's quick n easy mate.give it a go mate that the way it done in bush in Australia 👍💪🇦🇺

@vdubs17

Жыл бұрын

No need to one up. He deserves a win.

@Iceburgg

Жыл бұрын

​@@vdubs17I didn't take it as a one up. I honestly took it as a useful tip for everybody else watching the video who cannot make the same tool.

@McCarthyism_by_Youtube

Жыл бұрын

it can get messy if you have low profile tires

@duffman1241

Жыл бұрын

@@Iceburgg I’ve had to many failed attempts with driving over the tire and that’s with a 1ton truck heading to the garage to build me one

@rossbrumby1957

Жыл бұрын

I've done that in the driveway changing tyres on my Rodeo, but can put dirt and rocks in there if youre not careful. Dad used the bumper jack to break beads in the bush in his VJ Valiant wagon. Never been attacked by so many huge mozzies!

A couple of 2x4's work pretty well. One long one about a foot. I use whatever vehicle is nearby and leverage. Cheap, easy, and it works every time.

@PiLLO360

10 ай бұрын

Can you explain this method a bit more?

@chitownbangin

10 ай бұрын

Lol what?

@adamvroman3766

10 ай бұрын

.

@senatorjosephmccarthy2720

10 ай бұрын

He probably lays a 2 × 4 on the bead to the driveway. Drives onto the 2 × 4. Weight of truck breaks tire bead. It's how I do it anyway.

@jdinthekeys

10 ай бұрын

I will create a video showing my method. It's really very simple. You all won't be shocked.

That smile at the end. He was so proud of himself. ❤

Good one!! Changing valve stems and TP sensors would save some money there!

Real men of genius.

im making this ASAP TO REPLACE MY tire pressure sensors.

U BETTER MAKE MONEY WITH THIS!!!🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

Oh crap!!! I fought my tires. Now I see this. I am mind blown.

Шина: Дорогой дневник,видел бы ты сегодня что творил этот скупой, крысиный пердёж 😭😭😭

@cashmaker9838

Жыл бұрын

На трассе зимой с уголком и кувалдой ты не развлекался сразу видно

@youtuber77-77

Жыл бұрын

@@cashmaker9838 Базара 0, я не развлекался, так как это не часть моей работы и по трассам я не катаюсь.Но я знаю многих дальнобойщиков,которые развлекались с кувалдой и уголком,сам лично при этом присутствовал.Ты видать тоже водила🤠😉

@kawazzr1100

Жыл бұрын

​@@cashmaker9838 зачем? есть же запасное колесо!

@alexeygennadievych8913

Жыл бұрын

​@@cashmaker9838 Литой диск? Уголком кувалдой? На трассе? 🤣🤣🤣🤣🤣🤣 Проще не еба...ться, а на спущенном ехать до шиномонтажа, так хоть какая-то надежда будет на сохранность диска, а кувалда с уголком и монтажками = пиз..дец литью

@pashkevichkirill486

Жыл бұрын

​@@kawazzr1100 запаска есть, минимум две на автопоезд. Но бывают ситуации, что будь их даже 3, всё равно мало. А ещё бывают замечательные зажопья нашей страны, где покрышку найти ещё возможно, а вот шиномонтаж - нет

I mean I use two 4x4s , place them on the tires, drive up... But this is pretty nifty too!

@WHATdowelearnfromthis

10 ай бұрын

Could you explain how its done

@kencleg7721

10 ай бұрын

We used graders in the army if it gets bad use a dozer blade steel split rims mostly

@ballershanelle

10 ай бұрын

​@@WHATdowelearnfromthison each side..lay short boards on the tire..drive up on boards, a little..

@ronaldmartino2610

10 ай бұрын

I go to Pep Boys, silly me.

I change tyres so im impressed with a guy who can make something so nice but yet so useless

Oh, that is brilliant, gonna make one for myself. I do the car tires at my work. But its 35 km away, this would be great for doing the machinery & mower tires at home

This is next level. Great in a pinch!

@SalvadorHernandez-to2gq

7 ай бұрын

And then what? You ever try taking the tire off the rim?? 🤷

@theecheverriacrew

7 ай бұрын

@SalvadorHernandez-to2gq then you put it back on the car and spin it with a crowbar in it duh 🤣🤣🤣

Ok that us just a really cool idea. Its one of those things that you see and wonder how come nobody ever thought of that sooner. Great job!

I don’t know what your job is but you deserve a raise😂

Beautiful thing your lady supports you 💪🏽💪🏽