Svaka cast momci na uloženom trudu a i finalnom proizvodu..odlicno izgleda

@KeeflaDiy

3 жыл бұрын

Hvala druže puno 😊 Živio.

super splav jako dobro

@KeeflaDiy

Жыл бұрын

Hvala pogledajte i drugi,prošlogodišnji projekat na mom kanalu.

You have just defined my summer holidays project !

@KeeflaDiy

3 жыл бұрын

I am glad to hear that. Good luck in the project, let me know when you finish it 😊

Everyone is a welder, perfect. Nice craftsmanship.

@KeeflaDiy

3 жыл бұрын

Thanks😊

It's hard to believe this video doesn't have a ton more likes than this. Good job !

@KeeflaDiy

3 жыл бұрын

The new pontoon is under construction and I'm recording everything as with this model, and my youtube channel is young, I hope to get more subscribers and vipe likes on video clips soon 😁 thank you very much

That's badass. Will be starting my pontoon project soon, thanks for the inspiration. 🤘🏼

@KeeflaDiy

3 жыл бұрын

Thank you. I'm glad I inspired you. If you need any advice, feel free to ask. I will be happy to answer any questions you may have. ✌️

You could even make it a tiny floatable home ideas are endless it's very beautiful you did a great job congratulations.

@KeeflaDiy

3 жыл бұрын

It is great for fishing. 😊 Thanks Cristina 😁

Great job there! I was originally planning a wooden frame but this gave me some inspiration for working with iron instead.

@KeeflaDiy

3 жыл бұрын

Thank you very much. Iron will last longer although it is harder to work with. I wish you good luck in the project 😊

Amazing work bro! You have inspired me like many other people that have watched the video to build my own! So many ideas rushed to my head as I was watching, LED lights, some decent speakers! So many thanks bro from California with love 🙌🏾

@KeeflaDiy

3 жыл бұрын

Thanks bro. I'm really glad I inspired you, all you have to do is start making it and in a month it's in the water, believe me 😊 If you have any more questions feel free to contact me, I'd love to see your pontoon boat at the end when you make it. All the best Mair Kifić

Great craftsmanship in the process of building the boat with great company from beginning to end.

@KeeflaDiy

3 жыл бұрын

Thanks man 😊 good luck

well done, golden hands, made my dream come true, watched with great pleasure, liked it !!! nikolay ukraine

@KeeflaDiy

3 жыл бұрын

Thanks Nikolay 😊

Fico show parabéns irmão vc é campeão

@KeeflaDiy

2 жыл бұрын

Muito obrigado :)

Glad to see your work mate ..ur talented..keep going🎉🎉🎉

@KeeflaDiy

3 жыл бұрын

Thanks man. All the best 😊

I like this very much 💯💯💯

@KeeflaDiy

2 жыл бұрын

Thanks man :)

@jacksonjacob2469

2 жыл бұрын

@@KeeflaDiy ❤️❤️❤️

Killer video I’m building one

@KeeflaDiy

3 жыл бұрын

Good luck man. If you have some questions be free to text me.

This was a really cool build. Nice job.

@KeeflaDiy

3 жыл бұрын

Thank you 😊✌️

Amazing craftmanship, boat looks amazing, so awesome to see all your friends and family involved in the project together. Bet that beast is heavy.

@KeeflaDiy

3 жыл бұрын

Yes family, friends, neighbors paticipated. Thank you so much man 😊 Its not that heavy. 6 people lift him off the ground 😁

Great work !!!! - lovely to see you and your family and friends having such a good time at the end of your hard work👍😃 well done mate. Peace and love❤️

@KeeflaDiy

Жыл бұрын

Thanks a lot. It was worth the effort 🙂

Nice boat!

@KeeflaDiy

3 жыл бұрын

Thanks man 👍😊

Nice done...hoping to build this one someday

@KeeflaDiy

3 жыл бұрын

It is important to start. The rest somehow goes by itself trust me 😁

I have been wanting to build a boat like this for a long time. This video of yours will be very useful to me. Thanks broo....💪😉

@KeeflaDiy

3 жыл бұрын

You're welcome man. If you have any questions Be free to ask me whatever you want. Good luck in building your own boat 😊

@monibchangma3082

3 жыл бұрын

@@KeeflaDiy A question brooo. How much weight can 10 barrels float in water?

@KeeflaDiy

3 жыл бұрын

@@monibchangma3082 10 and more people without problem.

Very nice build. Congratulations!

@KeeflaDiy

3 жыл бұрын

Thank you very much 😊

@catalinstroita9734

3 жыл бұрын

@@KeeflaDiy What is it's size? I am considering making one, but without roof and on plastic barrels.

@KeeflaDiy

3 жыл бұрын

@@catalinstroita9734 dimensions is 550x300 cm

Looks so cool mate.

@KeeflaDiy

3 жыл бұрын

Thanks mate ✌️

@tinygiant9514

3 жыл бұрын

@@KeeflaDiy I'm going to build 1 one pontoon with steel frame, same as your but no 2nd floor and with plastic barrels due to for fishing at sea, will inform you once completed. Nice day man.

@KeeflaDiy

3 жыл бұрын

@@tinygiant9514 Good luck mate, if you have any questions feel free to contact me.

Mantaap

Brova , Good Job

@KeeflaDiy

3 жыл бұрын

Thanks

Fantastic

@KeeflaDiy

3 жыл бұрын

Thank you very much 😊

dope as fuck..... as soon as i finish my catamaran this model is next..keep inspiring the world man

@KeeflaDiy

3 жыл бұрын

Thanks man 😊 I will. Have some new projects in my head. Soon I will make one bigger boat just need some materials to come 😁

Thank you

@KeeflaDiy

3 жыл бұрын

You're welcome 😊

Good job bro

@KeeflaDiy

3 жыл бұрын

Thanks man 😊 ✌️

@amerjb4970

3 жыл бұрын

@@KeeflaDiy welcome😉👍✌ maybe you must + safefy buoys standy..

It looks very beautiful but in the State of Florida it would be a matter of time before it gets a lot of rust.

@KeeflaDiy

3 жыл бұрын

Once a year it needs to be refreshed, repainted here as well. And it can be made of aluminum but it is much much more expensive.

Very very nice🥰🥰🥰🥰🥰🥰

@KeeflaDiy

2 жыл бұрын

Thanks 😊

wow

well done beautiful project . can i ask . do you bring it with that same truck every time you wanna use it or keep there or where do you exactly get to keep it ? cheers

@KeeflaDiy

2 жыл бұрын

Hi Thank you. The boat is in the water all season. In the winter I pull it ashore because the lake freezes.

great job mat, PRO lvl realisation :) but why you didn't use plastic containers of the same size, instead of those heavy metal ones? with plastic, u'll be able to change any one of them if there is any damage, also, you don't have to attach them strongly...

@KeeflaDiy

3 жыл бұрын

Metal barrels are better joined by welding and I made a spike at the front. So that the raft sails better. I used plastic for a raft that is fixed to the lake and not intended for sailing. I normally work with metal so I opted for it. If by any chance one is damaged it is easy for me to replace. You can see the factory pontoons are always metal (aluminum or galvanized iron) because of the pointed part forward. I believe that plastic is better, but we do not have a company that deals with welding plastic nearby, and I have no experience myself.

@reidnichol9255

3 жыл бұрын

@@KeeflaDiy I found plastic welding very easy after finally getting a good welder. But, there is nothing wrong with using metal barrels. We have metal barrels with 20mil poly liners which have lasted 3-5 years in salt water. As they are free and poly barrels are $40US each, I would use steel in fresh water every time.

What an awesome project, great job! How did you know how big to make the pontoons?

@KeeflaDiy

3 жыл бұрын

I honestly had no idea 🤣 My plan was to add another one between these two pontoons if it didn't stand stable on the water with two of them. However when I plunged it into the water everything turned out great and there was no need for a third pontoon.

@beesting7198

3 жыл бұрын

@@KeeflaDiy Glad it worked out so well

super

@KeeflaDiy

3 жыл бұрын

Thank you :)

Pozdrav, super ste odradili splav, mi smo trenutno počeli sa gradnjom, možete li mi reći koju debljinu cijevi za konstrukciju ste koristili i jeste li cinolavi cijevi?

@aleksandarkrcmar9996

3 жыл бұрын

Cinkovali

@KeeflaDiy

3 жыл бұрын

@@aleksandarkrcmar9996 pozdrav Alexandre. Cijevi su razne, najviše sam koristio profil 4x3 debljina stjenke 2mm. Nisam cinkovao ništa sve je samo ofarbano.

Great work !! how much horse power the engine has to move a boat like this?

@KeeflaDiy

3 жыл бұрын

Thanks I use yamaha 4 hp. It goes maybe 10-15 miles per hour. I once put Johnson 20 hp, it went too fast 🤣

@KeeflaDiy

3 жыл бұрын

@Joe smith My budget wasn't that big, now I'm making a new one, so I thought about such seats.

What did u do to seal or possibly fill those drums? Did u fill them with foam? Or seal weld them?

@davidbernardi9579

3 жыл бұрын

And if seal welded did u put air pressure to it?

@KeeflaDiy

3 жыл бұрын

The barrels are new so I didn’t fill them with anything. I saw that people usually fill with styrofoam or pur foam, I just welded them to each other and tightened the plugs well.

Good fine

@KeeflaDiy

3 жыл бұрын

Thanks 😊

Great works, can you share de steel thickness that you used to make de boat ? it is 2mm square tube ?

@KeeflaDiy

Жыл бұрын

Yes the most of tubes are 2 mm 4 round vertical tubes are 3mm.

What about the water that will seep in between the barrel lids?

@KeeflaDiy

3 жыл бұрын

Hi. I’m not sure I understand because my translator translates my words literally. The joints between the barrels are open so that water can pass between and when the boat is taken out of the water all the water comes out. And if you think in case the water enters the barrels, the barrels can be easily replaced although in water that is not salty barrels last for 10 years before they leak water.

Great project, dude!!! What are the dimensions, width, height and all that?

@KeeflaDiy

3 жыл бұрын

Thanks man 😊 It's 300x550 cm surface. 250cm height without pontoons. Pontoons are 60cm

@Kionambali7

3 жыл бұрын

One more question bro, is that water salty or? I was thinking how long those pontoons gonna last if you’re cruising on salt water!!!

@KeeflaDiy

3 жыл бұрын

@@Kionambali7 no it's not salty 😊 I think pontoons should be plasticized or galvanized to last longer in salt water.

Svaka cast druze.Vrhunski uradjeno.Reci mi samo kako se ponasa na vodi,koliko osoba moze da primi bez preopterecivanja.Poz iz Srbije (Pirot) 😀

@KeeflaDiy

3 жыл бұрын

Hvala druže. Na vodi je savršen. Plovan je nevjerovatno dobro mozda i bolje od standardnih čamaca jer mala je površina koja dodiruje vodu. Vozim ga sa yamahom 3.5 ks. Deset osoba ne osjeti tako je idealno moze i 15-20 ali onda bi se malo trebali rasporediti po cijelom splavu da se nebi puno naginjao ako su svi na jednoj strani.

@markomikov3872

3 жыл бұрын

@@KeeflaDiy Bravo 😀Ja sam u planu da izradim isto takav,dugo sam googlao i trazio ideje i projekte.Ali kad sam video ovaj tvoj odusevio sam se,sve je palo drugo u vodu,samo o tome razmisljam.Nabavio sam burice,sutra idem u kupovinu cevi i nastavljam dalje.Reci mi samo koke si cevi koristio,5*3 mi se cini da su?

@KeeflaDiy

3 жыл бұрын

@@markomikov3872 da vecinom su 5x3, ima i dosta 4x3 ,ograde su 3x2 a ova 4 stuba za sprat su okrugle fi70 cini mi se .

@markomikov3872

3 жыл бұрын

@@KeeflaDiy Druze,a koke su dimenzije same platforme,bez burica i one zadnje strane gde se kaci motor?

@KeeflaDiy

3 жыл бұрын

@@markomikov3872 200x400 je sirina i duzina bez ova dva prolaza sa strana i bez zadnjeg dijela za motor.

Olá tudo bem, qual o tamanho sem o suporte de tambores, e qual tamanho ficou com os tambores

hi there did you use any form of buoyancy enhancements inside the drums or are the drums empty inside?

@KeeflaDiy

3 жыл бұрын

Hi. The barrels are empty inside, people often fill them with styrofoam or pur foam, I had no need because the barrels are new and the water is not salty and I know from the experience of other builders that it will take about 10 years before it leaks. In the coming years, I definitely planned to make real pontoons from 3mm thick sheet metal and replace the barrels to make them look nicer and of better quality.

@nicokroucamp7068

3 жыл бұрын

@@KeeflaDiy I think you did an awesome job , going to take on a similar project . We have a big dam here in South Africa, The Vaaldam. Wil share details as I go on .

@KeeflaDiy

3 жыл бұрын

@@nicokroucamp7068 thanks, good luck in project 😊

Pa nije problem to napravit kad sam ti izabrao aparat najbolji u kantonu😃

@KeeflaDiy

3 жыл бұрын

100% i ja kažem var stroj je stroj kume moj 😂

I wonder if chud327 has seen this one..I think he would approve...

@KeeflaDiy

Жыл бұрын

Who is chud327 😁

@jasonrussell7085

Жыл бұрын

@@KeeflaDiy he's on KZread. He is the first homeade pontoon build I've seen . Your buil was really nice..

@KeeflaDiy

Жыл бұрын

@@jasonrussell7085 Thanks, I made New bigger one this year, just making a Video and I will upload it soon.

Aferim jarane, koliko novaca je potrebno za takav splav ako nije tajna 😉

@KeeflaDiy

2 жыл бұрын

Hvala. 😊 Tada kada Sam ga pravio kostao me sav material I tudje usluge oko 1800 KM. Sada sa ovim cijenama bi kostao preko 2500 jer je material poskupio nenormalno, zeljezo duplo skuplje nego prosle godine. Upravo pravim novi, malo veci, potrosio Sam vec oko 2000 a nisam ni blizu 😁 imam samo hrpu zeljeza I burad.

@adisadis7845

2 жыл бұрын

@@KeeflaDiy hvala na odg. tako sam nekako i mislio. Bio bih ti zahvalan kad bi mogao dobiti par savjeta i uputa jer planiram sebi ovako napraviti, ali bas ovakav kao tvoj jer je brutalno dobro . Sretno u daljem radu.

@KeeflaDiy

2 жыл бұрын

@@adisadis7845 Sve sto te zanima slobodno pitaj potrudit cu se da odgovorim sto detaljnije. Proces izrade imas u videu a za ostale info pisi na mail mairkific3004gmail.com

What gauge steel did you use for the frame?

@KeeflaDiy

Жыл бұрын

Square tubes 3x4cm and 4x5cm the most.

@KeeflaDiy

Жыл бұрын

2mm thick steel

@C3Rl3

7 ай бұрын

@@KeeflaDiy thanks

How much kilogram a ship? How many barrel support?

@KeeflaDiy

3 жыл бұрын

Maybe 300-400 kg (construction) 10 barrels.

Best promotion for galaxy a51

@KeeflaDiy

3 жыл бұрын

Yes, samsung need to send me some new phone 🤣

Were you able to register this

@KeeflaDiy

3 жыл бұрын

I had no need because our law is not regulated enough yet. And the certificate can be done as with choppers, boats and home-made trailers. We have previously registered home-made boats.

@KeeflaDiy

3 жыл бұрын

Home made, I mean Hand made my english is not great 😂

Odličan rad koje su dimenzije splava Pozdrav

@KeeflaDiy

3 жыл бұрын

Hvala drug. Dimenzije su 550x300cm

@montesilvano1458

3 жыл бұрын

Hvala

How wide x long ?

@KeeflaDiy

3 жыл бұрын

300 cm

How do you make the cones for the front of the boat

@KeeflaDiy

3 жыл бұрын

First I made a shape out of paper, then I drew it on sheet metal. Metal sheet 3mm and welding machine.

@jacktorrence3682

3 жыл бұрын

@@KeeflaDiy awesome thank you so much

@jacktorrence3682

3 жыл бұрын

That boat is awesome btw I cant wait to make one for myself. Thanks for the inspiration

@KeeflaDiy

3 жыл бұрын

Good luck in project 😊 Send some photos when you finish your boat.

4:49 I hope your hand was fine I know it hurts.

@KeeflaDiy

3 жыл бұрын

🤣🤣 It's OK thx

hello, the dimensions of the square tubes used?

@KeeflaDiy

2 жыл бұрын

80% of construction is 4x3 cm

@KeeflaDiy

2 жыл бұрын

2mm thick steel

Koje su dimenzije?! I koja je penta?! Kolika snaga?!

@KeeflaDiy

2 жыл бұрын

550x300 cm Promjenio sam nekoliko penti. Najduže sam koristio yamahu 4ks dva takta. Jezero je mirno tako da nije bilo potrebe za jačim. Splav sam PRODAO U Banja Luku na jezero bočac trenutni vlasnik je kupio pentu 20 KS.

@ckiljin

2 жыл бұрын

@@KeeflaDiy iskreno jedan od lepših na youtube

@KeeflaDiy

2 жыл бұрын

@@ckiljin hvala puno 😁 tesko mi je bilo odvojiti se od njega ali hajde nek još neko uziva. U izradi je novi malo veći. Bit će snimak do ljeta.

@ckiljin

2 жыл бұрын

@@KeeflaDiy reci mi mi jesi li koristio tanki zid cevi?

@KeeflaDiy

2 жыл бұрын

@@ckiljin uzimao sam u 2 firme jedne su bile 1.8 mm druge 2 mm a ova 4 stuba su okrugle fi 8cm 3mm Stjenka

Great!! Country?

@KeeflaDiy

2 жыл бұрын

Bosnia and Herzegovina Thx

@stelviodelbrava6218

2 жыл бұрын

@@KeeflaDiy Go Bosnia! Beautiful job, guys!

@KeeflaDiy

2 жыл бұрын

@@stelviodelbrava6218 Thank you so much :)