Your shop is cleaner than a hospital. 😯

@jmyd83

2 жыл бұрын

only after he tidys up 😂

@thepuppy9089

Жыл бұрын

He is the doctor...👨‍⚕️

@Fatpumpumlovah2

Жыл бұрын

Thats cuz all it ever does is house tools and parts. Thats not a shop just a pretty hole in the wall to fool you guys and sell some tools.

@repairtech9320

Жыл бұрын

@@Fatpumpumlovah2 It does look fake. Something new in the same empty storage.

@asu-5748

11 ай бұрын

Mine is a landfill or a active warzone lol

Hi! Good job! Thank you! Very important: if it is possible ALWAYS, I repeat ALWAYS put the screws from the top down and washers and nuts from the bottom up! This is because of the vibrations. The screw connections are very good friends when mounted properly but worst enemy if they don't. So, the nuts and bolts always have tend to loosen due to vibration. If the bolt is mounted from bottom up it will fall down because of gravity and you loose the connection. The result could be... I don't even want to think about it... Otherwise if the nut falls down the screw will stay and you will have loose connection but you WILL HAVE connection. You will hear that something is wrong and fix it. Believe my 50+ years of experience 🙂

@bojanmajic

Жыл бұрын

...but so you find out about the "loose" connection ^^

@pecilijevelicanstveni4973

Жыл бұрын

@@bojanmajic Izgleda da ne razumem odgovor. Ako može objašnjenje 🙂

Благодаря этому видео я научился мыть детали и вещи вокруг себя.

This project is underpowered considering the insane work you put in the build, but great job! This My1020 motor can handle twice what you're using (6kw) easy, but considering the weight, you would need to spend $1500+ on 2 tandem motors, lithium 72-92v's, and 10kw+ controller to compete with gas engines. Actually you could smoke gas engines because of the electric torque.

@LuigisDesign

6 ай бұрын

Even more power, not as much than mine but ~30kw peak

Great work, Just a tip for the cornering on karts, they don't have differentials so if you lean into corners the inside tire will scrub causing you to go slower, so if you want to go faster lean outwards of the corner so that your inside wheel lifts up.

A Dr. Keeps everything nice and clean.. you make everything you do look so easy. . Wish I had your talent. I've attempted diy homemade builds alot in the past. Only a couple came o ut right lol ,my chainsaw bike was a good one ...

I used the same motor, same speed controller "minor alterations", I built a lifepo4 72v 12ah pack, built the cart from scrap steel and a 100$ welder, put good 10" tires on it, with a 3.33 gear ratio, same exact 428 chain as video. I reached 82 mph.

@kuba5680

Жыл бұрын

where did you buy the motor?

@pmp13drc13

Жыл бұрын

@@kuba5680 Amazon

@kuba5680

Жыл бұрын

@@pmp13drc13 and where did you get the battery from?

@brysoncartmell8536

Жыл бұрын

I have a feeling he wasn’t using a 72v pack or it wasn’t lithium probably still waiting on his final battery you should be able to hit well over 70mph he was barely going 40

@DTB2.0

11 ай бұрын

​@brysoncartmell8536 70? Umm not with that motor and controller

my right ear is loving this....

So nice to see someone clean their machine before going to work on it.

Now this is how all how to videos, should be made, we should have a choice, talking or no talking, think you, Job well done 😎

KZread should really make a mono button for videos like these

Parabéns 👏 que limpeza e organização

Nice build and video!! I just used same motor on a mini-atv build, and it hits the ground today 😁 GoKart is next!

Este o încântare sa te privesc. Magic! Super scule!

Very nice soldering techniques at the battery terminals. Well done.

@rangerst_870

4 ай бұрын

there was a plug he just did not want to use. Should NOT have soldered like he did.

Excellence. Major attention to details. You must have awesome mentors.

right ear sound, SOOOO NICE

the new motor sprocket one looked better but it meshed so much nicer

Dude you just became like one of my biggest heroes did you are awesome

That's a clean Garage ... I like it

Don't listen to the haters/gonna hate, Phenomenal job!

Glad I landed on your cannel! Awesome Job and j00 got some talent! Keep doin what u do! LOL ... I did the same with the paint remover, does wonders but what a mess!

All that hardware in one bucket 😂 have a good time dude

Those are great little motors. I did an exhaustive video series on these as well. Nice job!

Lov the way you work man. All in order!

Absoluter Werbefilm...😮

ΤΕΛΙΟ ΜΠΡΑΒΟ ΘΑ ΓΙΝΗΣ ΠΟΛΥ ΚΑΛΟΣ ΜΑΣΤΟΡΑΣ

Hey mate, great video! I converted a kart into an electric one myself too, but my reverse and 3 gear switch doesn’t work properly. Do you have any sort of wiring manual? I switched the direction of the motor running (because of building reasons), could this be an issue with the functions not working?

I noticed that my 72v motor lacks the fan inside seen in many videos. Do you have issues with over heating destroying the motor? I'm mounting a fan below and drilling the holes up in order to at least get some airflow. What have you done?

Any why you could Gadd the links the electric kit you used on the go kart? Been wanting to do this but don’t know what kit to get

Love this! Did similar build on eATV but the mishaps and delays leveled me! I finally replaced motor kit and back in action. How did your build hold up, kart is next on my list 😃

Hi, I would like to know what cleaning fluid you are using to make the parts shine like new，thanks

That was an amazing... tool commercial.

I’d like to see updated video dual motors lol that be sick

Okay... now how about a list of links to the supplier of the parts used in this build, so we--the audience--can build something of our own powered by this combination?😕

Вот это отличная работа! Карт получился огонь!

NICE! What model of Einhell grinder is it?

whatttt!!!!!!! i watched this video, great build. but you gotta drive it like you have a liscense, because it doesnt look like you do

Bravo Majstore pratim od pocetka,nebrem verovati jos ve do kud si dosel a lefko bi rekel prek noci Svaka Čast ima nade za dobre projekte samo gass!! Evo i moje price ako kog zanima popratite 😋🇭🇷👌

Excellent!!!! Clean workmanship professional job and drives very well I will subscribe good video

You need a pressurewasher and a ultrasonic parts cleaner 😊don't forget the sandblaster 🎉

Where did you buy this battry

What battrey u use?

where did you buy the motor kit

What’s the the top speed

You think this motor would push a easy go golf cart ? Or maybe 2.of them?

Wow! You did it beautifully!! Can you please tell me what motor you used?😅

Que buenos videos amigo!!!! Felicitaciones!!!

Nice build👍 btw may you describe about that tyre and rim? thanks

Sensacional mais uma vez 🇧🇷🇧🇷

Good Job! for more speed (80-90 kmh) you need a bigger motor plate...

Use a 6” diameter forklift motor. Get rid of the riff raff .

@Kevin.OBrien44

Жыл бұрын

That’s what I have lol

@normellow

Жыл бұрын

@@Kevin.OBrien44 , yea you did it right and you used a good size. I have one that’s about 4 inches longer than the one you have and it’s a beast. I was going to run mine at 123vdc off a Curtis controller. But unfortunately I never finished it. If you want to run your motor at higher voltage. You can advance your brushes. Anyway nice care chief!

@Kevin.OBrien44

Жыл бұрын

@@normellow yeah mines 80v and it’s kinda too low

@normellow

Жыл бұрын

@@Kevin.OBrien44 Coat the entire brush holder in heavy varnish to prevent plasma arcs ! Once you get over 90vdc , you’ll notice your wrist watch will become slower. That’s because your bending the space time continuum!

@Kevin.OBrien44

Жыл бұрын

@@normellow lol yeah idk if I’ll upgrade my kart or just build a whole new one in a few years probably an ac system

All that amazing craftsmanship, to be let down by a puny motor.

link in description for the parts you used. electric motor, speed controller etc ?

What battery are using?

Which controller did he use?

What gear ratio are you using?

Great video, can you explain how did you manage to get the chain always at perfect tension?

@AidenRisk

5 ай бұрын

I can explain: karts have adjustable engine mounts, they can be moved forward and backwards on the chassis thus controlling the tension of the chain, he made a new motor support with the existing mounts so the chain can be adjusted like a regular kart.

You could at a heatsink to the motor.

Great job, great performance. Subscribed...

Ciao .... come fai per vedere lo stato della batteria ? Perché non hai montato un piccolo display ?

Very beautiful kart 😲😲😲😲😲.

You should make and sell a course on how to do this, u will make banks. I would definitely buy the course.

Que controladora puedo ocupar para una razor 72v

where did you buy it????

When are you doing more with the garden tractor?

How many amp is that battery And how long can it last???

what batteries are you using

con you share the link for the battery please?

Great job please pit a protective body shell on it to protect your work

Loved everything except for the wire management and the fact that you soldered into the battery terminals instead of just getting a compatible connector, which would make it removable and able to be charged easier.

@Fanatic1704

8 ай бұрын

and where are FUSEs? Imagine any accident, it will explode like a bomb

How can you charge this device with the battery and know for a battery do you have?

it is better, what i seen in start 2023

Sweet tool setup

How much does it weight without a pilot?

You should put dynamos in the wheel hubs

I didn't see you spray oil on your brake rotor did I? 😬 Right around 39:48.

Do you know if it matters which way the motor is positioned ie (with the sprocket to the left or right), or is it changeable with the wires?

@Druls8

Жыл бұрын

The motor used is "3 phase" so changing 2 wires around makes it spin in the opposite direction. If you have a programmable speed controller it can be done with software aswell.

Ottimo lavoro direi

This is not about changing to electric, its about making. A place for ads for the tool company!

How do you know how many percent of battery you have left? maybe fix a Battery Capacity Meter?🔋 But otherwise it turned out really nice. good work!! 😉👍

Che motore elettrico hai usato?

Witam, jakiego odtłuszczacza używacie?

what engine you use and whre i can buy it?

Cool Build but very slow and not enough battery range - I endurance race a KA100 and we are hitting 85mph on some of the road race courses and the races last from 45 minutes. Very nice build.

Everything is perfect. : )

Koja je pesma u zadnjim scenama videa?

odlican kanal, svaka cast!

You should put dynamos in the wheel rims

Use a QS 138 90H Motor. This is lots of Power

can you please provide a link for the battery?

Nice job!🎉

You'll want about 15,000 watts for this type of project

Link for the electric motor please

Wow videos very gôd👍🙏

You are blessed

Where did you get the gear sprocket for the electric motor?

@mautay5567

7 ай бұрын

china china china

@juan131382

6 ай бұрын

@@mautay5567 where in china china china??

What size motor and where did you get all the components. I have a 2.5 hp treadmill motor I want to install on a bike

@mautay5567

7 ай бұрын

china china china

Hey, guys, where compare part with 2 kart, engive vs electric with some professionals on it? I am so wait it at end... And some result feedback from them...

Sweet build man.