The MDF idea is great. Had the bolt securing figured out, but I thought about a 1x12 and was worried about warping/splitting.

@TreeTopFlier

3 ай бұрын

MDF works great just make sure it's not partical board.

Been looking at inline products for swap out mounts $$$$, a lot better idea, using mdf and the nuts that you used solved my biggest problem I have had with past wood plates. Great video

@TreeTopFlier

2 жыл бұрын

Just make sure to use MDF and not partical board.

Exactly what I needed to know, just got into reloading Thanks

Nice job and a great idea. I used mdf to make the top on my current reloading bench. Always enjoy your videos, keep them coming.

@TreeTopFlier

6 жыл бұрын

Thanks buddy you too.

Thanks for the video! I am building a small reloading bench and I am making bases for my equipment using this concept. I like using the T nuts underneath!

@TreeTopFlier

8 ай бұрын

Still using it, works great for me.

Hi TreeTop, hope all is well. Thank you for posting your ideas and projects. This is a nice alternative to some of the options available from other vendors. Have a great week!

@TreeTopFlier

3 жыл бұрын

I still use this and it works great and its low cost. If you have a table saw, its a no brainer! Thanks for watching Tye.

I'm glad I checked out your reloading bench vid mostly because I have that exact same table saw!! I bought mine brand new when I was about 23-24 ! Dam long time ago! Im 46 now. It's been a really good table saw, a little bit big and clumsy but it works good. I got some great ideas for my saw from your video!! Thanks Brother.

@TreeTopFlier

6 жыл бұрын

I have done some high end work with that router table setup, raised inlayed panels rails and styles etc. I take the fence and put it all the way left side from the saw feed side. I built two jigs that I clamp to the fence that make an opening for the blades and act as a fence to feed. Works like a champ. I have a switch box wired in on the tail side to run the router. The router feeds backwards of the saw. Thanks for watching

Love your video and was looking at the other tools you have. It seems that you and I have the same things. I will be making one of the quick removal stands myself. By the way, just wanted to let you know that the powder measure stand you sold me for my Lee Classic Turret Press works and looks PERFECT!!! Anyone using that press should have one. Another great video! Keep them coming.

I like your thought process. I don't remember if this video got my thought process going or not. I have all of my presses, chop saw and the arbor press mounted on boards. My workbench is a 30x60 DIY Ron Paulk Style top that has 3/4 inch dog holes every 8 inches. I mount the boards using fender washers and bolts through the bench top. Makes for a sturdy set up. Easy to remove and replace with whatever I am going to do next.

@TreeTopFlier

7 ай бұрын

Sounds like you have a great setup! Years later, I'm still using the same system in the video with no plans to change. Thanks for watching.

I really like the router table add on!!

@simpsonrdlarry4385

6 жыл бұрын

Some good ideas on your mounting hardware. Good video! Keep up the good videos!

Great press mounts brother. Look forward to your content. Nathan

@TreeTopFlier

6 жыл бұрын

Thanks bud, likewise!

Pretty slick, man!

@TreeTopFlier

6 жыл бұрын

Thanks bud.

I used Screw in threaded inserts when not being used i fill them with a allen set screw. and have same table saw with built in Router, But used a Kreg mounting plate System. If you change your Belt to a Segmented belt cuts down on vibration and some Noise.

@TreeTopFlier

10 ай бұрын

Sounds like a great setup! Thanks for the tip om the segmented belt.

It's a Fantastic deal dude. Good instruction video. Btw, I had a table saw just like that one. stable and cast iron. Little vibration to it. I like the addition of the router as well.

@TreeTopFlier

6 жыл бұрын

I didn't take the time to show it but I slide the fence to the right side of the router and I have a box jig that allows me to really set it up like a shaper with a guide and all.

@Thorsaxe777

6 жыл бұрын

This just goes to show that enjoying the craft of loading ammunition does not stop at the Press. Many of the things we use in other parts of our lives have applications as well. I enjoy your program and find it a big help to the new shooters and loaders, getting set up and doing things right. Off subject,, You have a way of maximizing your storage space as I see. This in itself can be a video subject as most of us outgrow our workspace. Good content and a cool calm way of explaining what the objectives are and why. Keep up the good work. Dave.

@TreeTopFlier

6 жыл бұрын

Thanks so much for the very nice comments. Mostly the shop looks like a mess to me. Too many interests and never enough space. With the channel I mostly try to cover things from a different angle.

Great video,always informative keep up the great work. If anything more 300 blackout video

@TreeTopFlier

6 жыл бұрын

Thanks for hanging with me! I did update "making 300 blackout brass" recently and one a while back about using the collet die and shoulder set back to make more accurate rounds. Dont know if you saw that.

For people who like this idea , I suggest throwing a vice on one of those base plates I found it to be very handy.

@TreeTopFlier

6 жыл бұрын

That would be good way to swap out and work on a rifle etc. I need to think of a storage setup for the dismounted ones.... I'm running out of room!

@GunFunZS

6 жыл бұрын

TreeTopFlier I set a crappy coffee table in the place on my bench where your storage drawers are . Spare presses etc. go on top bullets and things go underneath .

@TreeTopFlier

6 жыл бұрын

I was thinking about a wall mount or something for storage especially if I get more presses than stations. But to be honest, Im running out of wall too LOL. First world problems....

Great idea, I think I’m going todo something very similar, think I’ll like a 2x10 for my bases. Also might do the Paulk workbench method, just clamp it to the table with the Festool 20mm hold downs, so many holes, so many choices.

@TreeTopFlier

Жыл бұрын

Im still using this system. Works great, just takes a second to dismount and remount a new item. Really makes the most of a limited bench space.

Hey TreeTop if I send you a Lee Value Turret press will you be able to work with that? Seems as the new 2018 presses use the same base plate. I would love to have a powder drop system aswell. Lmk on slack 👍

Fast forward to 5:00 to see it in action.

@TreeTopFlier

9 ай бұрын

Good call

The info on the MDF is probably worth its weight in gold. You'd spend a lot of money on pre-made flush mounts to accommodate this exact same setup otherwise. I wonder what kind of strength you'd get combining your MDF base plates with T tracks. Would the combo be sturdy enough for the resizing process?

I use a piece of plywood secured to the bench with larger 'C' clamps...

I'm honestly surprised that MDF was sturdier than plywood. The MDF I'm familiar with flakes apart if you look at if sideways. Then again, if plywood does happen to develop a cup it will be highly impractical to completely pinch flat which would lead to a springy mounting plate. Perhaps MDF being a "hard sponge" consistency is the key to it providing a sturdy mounting surface to the worktop.

@TreeTopFlier

Жыл бұрын

Not sure but you could be referring to "particle board" which is weak and falls apart. MDF is really dense and much stronger. Its a little hard to find. last time I looked, Lowe's doesn't even carry it. The ones Ive made for my presses are years old at this point and still holding up great. With 4 mount points, they virtually no flex...Very stable.

How did you create the recess in the block to mount the press? I’m using your method and that’s the last step I need. Thanks for the idea. I love it.

@TreeTopFlier

3 жыл бұрын

i use a counter sink bit and counter sink machine screws now. it leaves more material and makes the blocks stronger.

I like your powder measure stands. How much for one and will you ship to Canada? I have the Lee Single stage 50 th anniversary kit now however I am looking for the Lee 4 hole turret press soon.

@TreeTopFlier

6 жыл бұрын

Hi, as of now the price is $69 shipping. I dont have anything against shipping to Canada. I looked into it a little looks like it is expensive. About $30+ I think that was UPS Canada. Thanks for you interest. Contact me at TreeTopTube@aol.com for more info. kzread.info/dash/bejne/om191taaeqrcZLw.html

Thanks for the mount plate idea as I rearrange my reloading bench layout. What dimensions did you end up going with for your final plates? Also, did you land on 3/4" MDF?

@TreeTopFlier

2 жыл бұрын

Yes the blocks are 3/4" MDF (not partical board) They are 7" by 8" that works for everything I have mounted.

@wildbilloh2678

2 жыл бұрын

@@TreeTopFlier thanks! I picked up some 3/4” MDF and those Tee Nuts today. Working on mounting up my new Lyman press tomorrow!

@TreeTopFlier

2 жыл бұрын

@@wildbilloh2678 Hope you're happy with how it turned out. I still like mine.

What kind of dust collection have you got on the tablesaw ? I didn't see any sawdust flying when the saw was running.

@TreeTopFlier

Жыл бұрын

I dont have one. Most of the dust goes down under the saw. Mostly I open the back door and the garage door for a pretty good draft that keeps the air pretty clear.

@williamcastleberry7338

Жыл бұрын

@@TreeTopFlier I have a saw like it and dust goes everywhere.

@TreeTopFlier

Жыл бұрын

I dont mean the garage dosent get saw dust all over. When I want to clean it i just sweep up the bulk of it and blow the rest outside with a leaf blower...all redneck like lol

What's the measurements of the wood plates?

@TreeTopFlier

2 жыл бұрын

8" wide, 7" deep is what I settled on.

@johnmorgan9847

2 жыл бұрын

Thanks!

@johnmorgan9847

2 жыл бұрын

I got all the hardware last week and I just need to cut the pieces and drill the holes. I'm really excited to be able to move everything around and figure out what works best where. I have a Lee anniversary press and just got a load master a couple weeks ago. It's so hard to figure out placement if it's permanent and this solves that problem.