Many have asked for dimensions for this stand The entire stand was made of 3/4" plywood, but you can use any type of lumber you wish Base: 10" X 18" Top: 10" X 8" two layers thick Sides: 5-1/2" tall, the top edge is 8", the bottom edge is 9". There will be a slight angle to the front edge The center support is 4" X 8" 3D printed primer funnel: www.ebay.com/itm/Lee-breach-lock-reloader-primer-catcher-3d-printed-/252908837868

Nicely done. You motivated me to do the same for my reloaded. I am short on space and your example would great for me. Thanks for posting your build

@gunnwild1

2 жыл бұрын

You're welcome, good luck with the build

Great equipment you have in your shop to do a great build. Well done.

@gunnwild1

5 жыл бұрын

Thanks Brian, I love working with wood but haven't had much of an opportunity for a while. Been busy plus the broken arm thing

I used to own that same press about a decade ago the Lee anniversary Edition press kit! I had that for a long time then I bought a RCBS Master Reloading kit. I also own the horn Adt lock n load press kit as well. I actually designed a portable press bench I used a pretty sturdy wooden stool and designed a kind of weight rig for the bottom of it that I used 2 15 pound dumbbells that I hooked up to the bottom of the stool to help anchor it in place I then made a wooden piece for the top of the stool that was a little wider and square for the top I then fit the RCBS accessory plate to the top of that wooden piece where It made it a lot easier to take off and hook back up to my work bench so whenever I wanted to reload inside or do it while I’m in front of the tv or whatever I could just move the press to the portable press stand and back and forth as I saw fit it works really awesome.

@gunnwild1

3 жыл бұрын

Sounds like you have a great set up that suits your needs

Well done sir! And the journey continues......

@gunnwild1

5 жыл бұрын

Thank you, I need dies and a way to insert the primer and I can start reloading

Nicely done Sir!

@gunnwild1

5 жыл бұрын

Thank you

Awesome Job Brother that will work nicely! lightweight and portable

@gunnwild1

5 жыл бұрын

Portability is what I was going for. Thanks brother

You design and execution of the stand is outstanding. Nice

@gunnwild1

5 жыл бұрын

Thank you sir

Good job! Well built!

@gunnwild1

5 жыл бұрын

Thank you

Nice work! That will certainly hold up!

@gunnwild1

5 жыл бұрын

Thank you, it's really solid

Cool project and tune!

@gunnwild1

5 жыл бұрын

Thanks brother

Good stand and it looks sharp....Good stuff....

@gunnwild1

5 жыл бұрын

Thank you Scott

I have that press, Dedicated to Pulling bullets have a RCBS Collet Puller die with Several different Caliber Mandrels. I reload with a Lee Classic Turret Press

excellent job sir.

@gunnwild1

5 жыл бұрын

Thank you

Man. You’re fast 😂 Makes me want to go build something. Well done Big Jeff.

@gunnwild1

5 жыл бұрын

Ain't nuttin but a thang LOL Thanks Scott

Awesome project

@gunnwild1

5 жыл бұрын

Thank you

Nice!

@gunnwild1

2 жыл бұрын

Thanks you

Great job 👍 .

@gunnwild1

5 жыл бұрын

Thanks Dave

Huh.... I totally missed this one. Excellent stand.

@gunnwild1

5 жыл бұрын

KZread and their funny business =))

That real Nice ,,great job 👍👍🇺🇸🤓

@gunnwild1

5 жыл бұрын

Thank you

Absolutely fantastic. Doing this Monday or Tuesday on my days off

@gunnwild1

3 жыл бұрын

Good luck

@dimmadimsom

3 жыл бұрын

@@gunnwild1 didn't get to the project yet but I will within the next week or so. Just acquiring the right tools. Can you give some dimensions by any chance and where can I get the insert for the primer feed?!

@gunnwild1

3 жыл бұрын

@@dimmadimsom All of that information is in the comment pinned at the top

@dimmadimsom

3 жыл бұрын

@@gunnwild1 thank you. Did not see that!

@dimmadimsom

3 жыл бұрын

One last question. Why the slight angle in the front?! I'm not very well equipped with tools to potentially get that angle... but would it be okay if I didn't cut it at an angle ?! All I have is a circular saw, trying to do this build for the exact set up you have... I have as well...

Cool man.

@gunnwild1

3 жыл бұрын

Thanks

Very nice....

@gunnwild1

5 жыл бұрын

Thank you Bobby

Looking good brother 👍

@gunnwild1

5 жыл бұрын

Thanks Jesse

Very good build ;}

@gunnwild1

2 жыл бұрын

Thank you

Very nice Big J

@gunnwild1

5 жыл бұрын

Thank you brother

Nice setup and portable too .

@gunnwild1

5 жыл бұрын

Thank you

Very cool Bro. I like your sho p, I'm envious. Also like the wind chimes I could hear, very peaceful. What movie do you get those segments from at the end of your vids...?

@gunnwild1

5 жыл бұрын

My shop needs some organization, but thank you. I get the footage from google images and piece it together . Happy Easter my friend

Craftsmanship! Noice!!!

@gunnwild1

5 жыл бұрын

Thank you

Awesome stuff there

@gunnwild1

5 жыл бұрын

Thank you Phil

Nice.. you got skills 👍

@gunnwild1

5 жыл бұрын

Thank you brother

Looks solid. Doesn’t look like the spent primer tray is readily accessible.

@gunnwild1

5 жыл бұрын

Thank you, I can barely get the tray in and out when the handle is positioned in the right spot, but it is removable

Wow bro looks nice, have you been reloading at all?

@gunnwild1

Жыл бұрын

Thanks, I'm still using it. Yeah I'm reloading, still only reloading 9MM. I want to get some dies for 357 magnum and eventually 40 & 45

nice....

@gunnwild1

5 жыл бұрын

Thanks Richard

Hey I have to ask what this fit a Orwell rather would it handle a breech lock Challenger press? I'm in need of a reloading press bench and I'm that broke I can't even look at something lol I have a bit of lumber and hand tools

@gunnwild1

4 жыл бұрын

It should work, you would need to design it around that type of press

Bombproof build sir

@gunnwild1

5 жыл бұрын

Thank you. I didn't receive an email from you for a channel sticker, did you email me?

@YTsux24-7

5 жыл бұрын

@@gunnwild1 no sir I looked in your about section and did not see an email address

@gunnwild1

5 жыл бұрын

I gave it to you in a comment when you asked how you can get one. Here it is again: gunnwild1@gmail.com

Excellent job! Do you have the measurements of your design? Do you have a link where the 3D device can be purchased? Thank you, Sir!

@gunnwild1

3 жыл бұрын

The entire thing is made of 3/4" plywood, but you can use whatever type of wood you wish The base is 18"x10" The top is 10"x8" two layers thick The sides are 5-1/2" tall the top edge is 8" long the bottom edge is 9" long so there will be a slight angle The center support is 8"x4" The 3D printed primer funnel was given to me by another KZread channel, but you can find them on ebay: www.ebay.com/itm/Lee-breach-lock-reloader-primer-catcher-3d-printed-/252908837868

@stp7629

3 жыл бұрын

@@gunnwild1 You're the best!!!!!!!!! Thank you! I followed your instructions and built it! :) Thanks again!!!

@gunnwild1

3 жыл бұрын

@@stp7629 You're welcome and good luck

Nice Sir👍

@gunnwild1

5 жыл бұрын

Thank you

That was awesome brother, you have an excellent shop!! Did you get that design online, or did you just come up with it on your own? You do very nice work my friend, glad to see you are well on your way. Let me know if there is anything else you need, I may have extras just sitting around. Have a safe and blessed weekend brother!!

@gunnwild1

5 жыл бұрын

Thanks Rich, it was my own design, then I saw the video popsquest did and I borrowed a little from his design. I picked up a caliper today, so the only things I need to get is a way to prime the cases, a 9MM die set, and an ammo checker. All are on my wish list on Amazon, right now I'm saving money for my vacation and I will pick up those items when I get back providing I still have money LOL

AND Your Off to the Reloading Hobby.

@gunnwild1

5 жыл бұрын

Almost there, I still need dies and a way to prime the cases

Won't be long before you are self sufficient have fun

@gunnwild1

5 жыл бұрын

I hope so, I picked up a caliper today and need to get a set of dies and a way to prime...home stretch

All that for a 15.00 press! Well, now they are 70-80. I bought it 3 yard ago for depriving for 15.00

@gunnwild1

Жыл бұрын

It works well for me

You look good covered in man glitter! xoxo

@gunnwild1

5 жыл бұрын

...and you know this man

Speedy Gonzalas

@gunnwild1

5 жыл бұрын

I try =)

Oh yea First!

@gunnwild1

5 жыл бұрын

I purposely scheduled it to be released early so you could be first...no normal human being is up that early =)