I have the 56" husky box and I did the exact same thing with the light and even used the harbor freight magnet. I was surprised to see someone else did that as well. Great minds think alike.

That light mod though...................genius! That makes the entire box much more than just a tool box.

I just bought one and I love it. filled it already.

Great idea with the Light man, nice setup!

I took your idea with the light. I screwed one of those cheap HF bar magnets into the back of the light housing and just stuck straight to the hood of the box. Works amazing. Thanks!!!

Brilliant review, I love the overhead light !

Just got this box.. love it thx for the video. Gave me some very useful information

Great video man! I bought the exact same one. I love how when you push the drawers they shut themselves. You have me some great ideas with the light!

@e36m3JeffKennedy

7 жыл бұрын

Thank you, I am really happy with everything.

@samwittstruck.6685

7 жыл бұрын

e36m3 Jeff Kennedy

Great video, man. I just bought a similar box from HD. That light hack was worth the view alone. I wanted an LED, but I didn't want to deal with a battery. Also, yeah, separating out the 1/2 sockets from the others is probably what I will do too. Doesn't make sense to cram it all in one drawer.

Dig the light idea...good work!

Just got me a husky tool box and i think its a great box not as full like this one but its getting there 👍

Great idea 💡 with that HarborFreight magnet bro 🧲 👍🏼

I just got one. I wish I got one sooner. Filled it up quick.

Really like your under the hood light

I run my sockets in the top and battery and air tools in the big drawer in the bottom cabinet

A good video. That is a nice tool box. cheers .

nice review, almost bought the standard 52in box from the Depot today, glad I saw your video! I like the soft close draws, and this one has the plugs. the other 52in doesn't have those 2 options. And I like the all black. perfect for my garage for working on my own car/truck and snowmobiles. Thanks

@kwmiked

7 жыл бұрын

also like the better wheels and locks on this 52. The standard 599$ 52in I was looking at today had no wheel locks and no power strips and no soft close draws. so for 100$ more I think this one is worth it. also the 56in box manufacturer looks similar to the cheaper52in I was looking at. ?

@e36m3JeffKennedy

7 жыл бұрын

The standard isn't bad but for the $100 its well worth it to get the flat black, in my opinion.

Nice Box , great setup .

@e36m3JeffKennedy

7 жыл бұрын

Thank you

damn good idea for the light!

Neat tool box video Ken. I need to do a tour video of my Milwaukee 46 in. tool chest and rolling cabinet set.

@e36m3JeffKennedy

7 жыл бұрын

The tool box tours get lots of views, This was one of my first videos, I need to do a update at some point. Thanks

Love the LED light hack

Awesome, I have a little light but haven't found any good magnets, thanks for the idea. I will definitely do this. Do you know kr have you thought about trading the 2 little drawers for a a bigger one? Dont know if husky will sell you one drawer that will fit inspite of the two smaller one.

Had the same box, and the large socket drawer would hang up when opening it on the left side only. Eventually upgraded to a 72 inch US General.

Great video, and love the light too. How has the box held up after 5 years?

Great light hack.

They have 2 versions of this box, the standard at 20 gauge steel and the 18 at 20 gauge steel for 798 vs 698 for the standard. Is it worth it for the heavier gauge? I think the drawers are an inch deeper as well.

I don't see them selling the 52 inch matte black one anymore but they do have the top drawer tool chest and bottom tool cabinet. I can pretty much buy those two and it'll be the same?

Damn, I'm doing that with my hammers free up a drawer

the light mod is incredible.

@e36m3JeffKennedy

7 жыл бұрын

Mike's Tool Shed I'm glad you like it, is been working great, I shot a little more detailed video on it if you want to watch it, kzread.info/dash/bejne/mKCe0dGrhLLFgrw.html thanks.

Nice tool box bro. I really life the LED shop light mod. Might copy that idea. Subscribed to your channel, put out some more videos.

@e36m3JeffKennedy

7 жыл бұрын

RealTechReview thank you sir, I am trying to put out 1 or more videos a day on something I think is interesting or useful. I also enjoy your videos, how is Hyundai treating you?

@Projectlife2023

7 жыл бұрын

e36m3 Jeff Kennedy I am enjoying Hyundai far more than Kia. it's going GREAT. I had considered going back to Chrysler, but chose not to. It's good to initially just make videos. Helps build your channel, figure out what exactly you want to do with it. Then after a while comes editing... but I wouldn't worry about that until you have 50+ videos up. Just my 2 cents. I don't even edit like I should. lol. I look forward to watching your future videos.

@e36m3JeffKennedy

7 жыл бұрын

RealTechReview thanks for the advice, I'm sure what I post will change with the seasons also.

What is that screwdriver set? The ones you said we should know about.

helo very good video!! and do you have a tutorial video how to installe the 3 center Ball bearing slide in the midel of the big drawer ?

Good video man

Where did you get the side holder for the hammers? Been looking for one

Great setup. What are the side holders for the aerosol cans? I see it is on both sides. I love the light hack.

@e36m3JeffKennedy

3 жыл бұрын

Harbor freight can holders, painted with flat black. Cover the magnets with tape when you paint it, it will come off and stick to the box if you don't.

Nice box I have the model just prior to the one you have it is full now very nice setup thanks for sharing your opinion and tools. I have a tour of my boxes on my channel if you want to check it out.

@e36m3JeffKennedy

7 жыл бұрын

John Gibson I will check it out 👍

hey nice tool box. i also wish the drawers were a little deeper. i had these rails for my sockets that i thought would fit perfect but after i got it i had to change how i wanted to set it up bc the drawers werent as deep as i thought. but you can check out my tool box tour on my channel. nice set up by the way.

@e36m3JeffKennedy

7 жыл бұрын

I was just at home depot and they have a new bow that is 24" deep and made in Canada, the price was double this box though and the display is blue, the flat black sold me on this one. I'll try to go back and shoot a little video on it, I forgot to because I'm just not used to whipping out my camera everywhere I go.

Hey Jeff, thx for the video. I was wondering where you got all of the black trays is see throughout your box? I could really use something like that to help organize. Thanks!

@e36m3JeffKennedy

7 жыл бұрын

Jake Davis harbor freight, just cut the edges off to fit

@jakedavis7399

7 жыл бұрын

I suspected as much, thanks for confirming. Nice job!

I see in the May flyer that HFT is now selling the Husky 46 inch bench with wood topoer, branded the a Yukon. I would rather they made a US General 46 inch version.

@e36m3JeffKennedy

7 жыл бұрын

I haven't seen that yet, I will keep my eye out for it, thanks for the heads up

Anyone know if this ships to uk?

What are the black plastic dividers you have in a lot of the drawers? That you stick the miscellaneous wrenches etc in? Have a link?

@e36m3JeffKennedy

7 жыл бұрын

6 Compartment Drawer www.harborfreight.com/6-compartment-drawer-organizer-99729.html I cut the ends off and butt them together

How did you make the hammer holder? Thank you for the review.

@e36m3JeffKennedy

6 жыл бұрын

Shawn NONAME it's made from wooden dowel rods from an old oak bathroom towel rack and a couple pieces of 1x6 for sides, attached with small angle iron.

@shawnnoname9291

6 жыл бұрын

e36m3 Jeff Kennedy ok thanks . I see now. Thats great idea.

In your top left "screwdriver" door you had some small drivers in a shallow black holding tray. Any chance you remember where you got those? I cant seem to find any small trays. Great vids btw

@e36m3JeffKennedy

7 жыл бұрын

2lazy4agoodname that tray is from harbor freight, I cut down the longer ones and get like 5 pockets I think. Just use a good sharp utility knife and be careful.

@njnetsfuckinrule

7 жыл бұрын

e36m3 Jeff Kennedy Thanks so much!

@e36m3JeffKennedy

7 жыл бұрын

2lazy4agoodname no problem, thanks for watching👍

Did you make a vid on your hammer holder? If not can you show it a little more in depth

@e36m3JeffKennedy

5 жыл бұрын

Sorry I never did but it's made from 2 dowel rods (oak) and 2 pieces of 1 x 6 and attached with angle iron into the handle mounting holes on the box.

cool

@e36m3JeffKennedy

7 жыл бұрын

Thanks for watching

I seen one at Home Depot that was wobbly and I want know is your wobbly? Or do the wheels hold it good?

@e36m3JeffKennedy

7 жыл бұрын

Gerardo Perales the wheels fell off mine when I rolled it out of the store, but thats because they don't assembly them correctly. I torqued the bolts down pretty good after than and no it doesn't wobble now. I honestly really like the box for what it cost.

Those "hobby screwdrivers" a link or place where you bought them at?! - thank you!

@e36m3JeffKennedy

7 жыл бұрын

Jordan Narlock I will try to post a link in the description when I get near a computer but you can Google "team associated factory team tools" should be around $40 for a 5 piece set give or take. I have a couple sets plus the Phillips and flat head. the other tools I have there are ofna, team integy, and mip. eBay might be a good place to look also.

Where did u get those plastic trays for loose stuff?

@e36m3JeffKennedy

3 жыл бұрын

Harbor freight, they needed to be trimmed but they can be made to work

Hows it still holding up for you? I've only had mine a few months but a lot of my drawers no longer auto close and when I took the drawers out to figure out why I found that the little clasp the drawers close on to engage the soft close have broken on about 50% of my drawers..

@e36m3JeffKennedy

5 жыл бұрын

I have not had any issues, all drawers still self close, it does stay in the same spot and I am the only one using it though, I would contact the mfg if I was you, they were very helpful getting the correct keys when i bought the floor model.

@JeepingNet

5 жыл бұрын

@@e36m3JeffKennedy Awesome thanks I plan to contact them and I'm thinking its because I've been working in some extreme cold lately. Garage was -15 the last month.

@e36m3JeffKennedy

5 жыл бұрын

@@JeepingNet yeah that could be playing a part, grease turns into epoxy at those temps, but you already know that

9,000 views already damn... what does e36m3 stand for?

@e36m3JeffKennedy

7 жыл бұрын

Bill Long e36 is the body code for my bmw, like sn95 is a mustang body code, and yeah this video is doing pretty good. thanks man

You said you got that large light at Harbor Freight? Battery powered?

@e36m3JeffKennedy

7 жыл бұрын

Robb A if your talking about the big one stuck to the top of the lid, the light came from sams club, its a Honeywell led shop light, it is being held up with the free with coupon magnet strip from harbor freight.

@HamsteakStudios

7 жыл бұрын

e36m3 Jeff Kennedy awesome! Thank you sir.

What brand of tools do you use for rc cars and helicopters..you didn’t go into detail

@e36m3JeffKennedy

5 жыл бұрын

Mip for allen screws, wiha for Phillips and flat head, and I will modify handles to use those brands tips. For 10th scale I like the old associated aluminum handles, my mini z cars I'm using atomic handles.

I found the top box available for like 200! you think it's worth it?

@e36m3JeffKennedy

4 жыл бұрын

I like the box but with just the top I would think you'd hit your head on the lid, it's kinda designed to be used all together.

i been waiting for 3 weeks now and its still not online i musted whent to all the home depos here in houston and none of them have it

@e36m3JeffKennedy

7 жыл бұрын

pipiripau 78 are you talking about the 52 in box combo? all the stores up here have them, I just looked yesterday. Good luck.

@pipiripau7859

7 жыл бұрын

e36m3 Jeff Kennedy i just whant the bottom and i whent to home depo and they told me its an online thing only and i ask then if they can call anothere homedepo to see if they have it and none in the houston area are available.

@e36m3JeffKennedy

7 жыл бұрын

pipiripau 78 yeah this particular box I have never seen available separately, the top box drawers are deeper if that means anything. Good luck, I hope you find one.

@pipiripau7859

7 жыл бұрын

Yes thank you and very nice video man take care..

where did you get the big m3 sign from

@e36m3JeffKennedy

6 жыл бұрын

Off of ebay a couple years back, a guy in Florida was making them. It's fiberglass, not perfect but looks cool. Closest I've found is a guy cutting aluminum signs on ebay now. Type this number into the ebay search bar (251777435987).

@Khan_Art_

6 жыл бұрын

Thanks!

What brand are you hobby rc car tools?!

@e36m3JeffKennedy

7 жыл бұрын

Anything Adrenaline team associated, ofna, team losi, integy

@anythingadrenaline4515

7 жыл бұрын

e36m3 Jeff Kennedy nice you've got them all. That light idea I'm going to try. Thanks again

Cost ??

Love your video but slow that camera down its moving to much and not focusing long enough on the things your pointing out

@e36m3JeffKennedy

7 жыл бұрын

Boo Wescott I'm sorry this was one of my first videos, is there anything in particular you were wondering about? It's difficult because the phone is such high resolution and it gets reduced and yes I need to slow down.

Thats a Tony the Technician edition tool box! =) OH what pliers are those next to the screwdriver trays? Stop by my channel if you like pliers =)

@e36m3JeffKennedy

5 жыл бұрын

I had my box and video before Tony, those are snap on 5acp they don't make that exact number any more but they have come out with a replacement. 👍

extra handle for $34.62 at home despot

@e36m3JeffKennedy

6 жыл бұрын

Awesome, thanks for the info

what you pay bro

@e36m3JeffKennedy

7 жыл бұрын

GAS,BASS,ASS,AND BRASS666 666 $699 full price, I have not seen it go on sale. If you are a vet they will give 10% discount.

Man... I can't afford to lose 2 inches! This is a real problem!

@michealpatrick6217

5 жыл бұрын

That is what she said!!

Cool tool box, check out the video I posted on my channel, I'm going to be an Automotive tech I need feedback on what tools I'm missing. Thanks