HolyBro KakuteH7: 6 UARTS, BT, INAV, BF and Ardupilot too!
shop.holybro.c...
Thank you for taking the time to watch the video. You can find me on social media at / painless360 and / painless360
Want to support the work I do here creating content and answering questions? Please consider subscribing and supporting the channel by visiting / painless360 or you can support me by donating using paypal.me/pain.... Where-ever you can support your local R.C resellers and shops. They need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
#holybro #flightcontroller #h7processor
Пікірлер: 39
Would love to see you do a DJI/Ardupilot build with this as you mentioned!
I love the KakuteF7miniv3 an H7 mini would be great
hopefully holybro solved the problems they were having with their boards, lots of peoples quads were dropping out of the air, mine included.
Awesome looking board, Lee! Fantastic review! 😃 Happy holidays! And stay safe there with your family! 🖖😊
I think that this is one of the best devices. But despite being short of uarts, I have continued to use omnibus F4 pro. Because it is so cheap. I want to try this device in the future.
great board always looking at new stuff nice 1 lee
quick and painless! nice!
That's a lot in a small package....Merry Christmas.
Excellent information
Seems rather good, but let down only by the Micro USB -- come on HolyBro, 2022 in a few weeks
@swissfreek
2 жыл бұрын
Came to say the same thing. It’s a minor thing but I’m disappointed. Only a matter of time before that micro-USB stops working properly.
@Ryet9
2 жыл бұрын
@@swissfreek Yeah I like the Matek h743-SLIM more, can solder up a USB if needed (or want a remotly mounted USB I guess for a wing), but it's lacking a 9v reg -- just can't win, bring on 2022!
Would love to see these in the shops. Any flight controllers, I would love to see any parts in the shops lol. Merry Christmas 🎅
Love it , ardupilot and dji, when you do the video, do it like for a 5 year old, please. Thanks
@Painless360
2 жыл бұрын
Check out the playlists. Anything including the words 'Introduction to..." or."... For beginners" is content made for those new to the subject... Happy flying
I just hope that this means Holybro isn't discontinuing their F7 line, which use the F745. There are very few FCs on the market that use this chip, which give them enough on-chip flash memory for AP and PX4...
@AerialWaviator
2 жыл бұрын
Flywoo Goku line uses F745 chip (in addition to 411). They make pretty extensive use of F745 in their FC lineup, and include support both INAV (3.2+) and, Betaflight support (4.1+). Their products more aimed at rotors (quads, hex), but given popularity of the FC, don't think the chip going away anytime soon. Can't speak for Holybro, but supply of the chips is not an issue.
@govind20231
2 жыл бұрын
On their website, they do call F7 v1.5 as being sold out. Hopefully, they will restock it once things ease up.
How would this go in a plane? I can't see from the diagrams how servos would be connected.
@Painless360
2 жыл бұрын
This is isn't a good fit for a foxed wing.. Happy flying
@alexwilliamson8268
2 жыл бұрын
@@Painless360 Hhmmm just bought this to go in a Dart 250g and running Arduplane, hope I can make it work…???!!
have you seen the matek h7 mini ?
Unfortunately doesn't work with Matek M10 gps 😞
@Painless360
Жыл бұрын
How odd. Lots of tips and tricks for setup on the webpage for it - www.mateksys.com/?portfolio=m10-5883#tab-id-2 - best of luck.
Could you confirm: 1)with kakute H7 (inc V2) will the Speedybee app and BT coms permit full tweaking when running iNAV (V5.1)? 2)will this permit DUAL (switchable) CAMS (Dji/CADDX) as per most iNAV capaple FC's? DREAM MACHINE (RHETORICAL QUESTION: is it possible: 360km/h, 360 vision/cams (5120x5120/150fps x2 arguably '25K'!), CR coaxial VTOL wing, UNDER 250g )
@Painless360
Жыл бұрын
1) Works the same as any other FC with SpeedyBee adatper. I setup the model using a PC and use SpeedyBee at the field for tweaks 2) I am not aware of any system that can switch HD cameras. 3) If you manage to build that under 250g I'd be very interested in looking at it. That is a VERY tall order.. Best of luck.
This FC now also supports PX4! Out of those 3 firmware-systems: PX4, Ardupilot/Arducopter, iNav ... what do you recommend? As far as I know Arducopter and PX4 offer similar/same quality of position hold and stabilized autonomous flight ... but both are a bit of a pain to set up ... is iNav on the same level in regards to stability? And which of those systems supports DJI OSD?
@Painless360
2 жыл бұрын
kzread.info/dash/bejne/jKt3rsakmtSzXbw.html covers my thoughts. Both Ardupilot and INAV support DJI MSP OSDs... Happy flying
Can this run a servo for a tricopter?
Hi Sir: I had purchased HolyBro KAKUTE F7 HDV BUT i don't have a HD DJI camera system, So is their a way to use the dji wiring connector for a analog camera because there are no solder pads just for video. Thanks
@Painless360
2 жыл бұрын
If there is, it will be on the website linked in the description.. Best of luck
@ksped1
2 жыл бұрын
@@Painless360 thank you
Does anyone know if this is inav compatible yet? Where would I find this info? I've never done anything inav before.
@Painless360
2 жыл бұрын
The best place is the release notes. github.com/iNavFlight/inav/releases it doesn't look like it yet
Can connect to TS100 bro?
@Painless360
Жыл бұрын
The soldering iron?
@Diymakervn
Жыл бұрын
@@Painless360 yes
@Painless360
Жыл бұрын
I wouldn't have thought so. Best of luck