Has anyone else, when installing this on a Hellcat Pro had one of the screws go all the way in but the other screw stick up a tiny bit after being torqued (15 in/lbs) down? If so, what was your solution? Grind the end of the screw a little bit? Get a shorter screw?
@ludjcharles69764 ай бұрын
Would the 509t x2 work on a hellcat? I really haven’t seen any videos of them
@skylerhorton8737 Жыл бұрын
Just received this same setup for my hellcat pro. Did you use the screws that came with the mounting plate or the ones that came with the sight? Thanks
@technickelbliss4461
Жыл бұрын
Hi, I used the screws that came with the mounting plate and I put some additional blue locktite on them.
@AirHeadArms Жыл бұрын
Good video, thank you
@technickelbliss4461
Жыл бұрын
Thank you!
@CoyoteBate Жыл бұрын
Can you cowitness the irons with the adapter plate and sight?
@technickelbliss4461
Жыл бұрын
The factory iron sights would have to be swapped out to co-witness. In the current configuration I have setup the Holosun and iron sights doesn't co-witness.
@CoyoteBate
Жыл бұрын
@@technickelbliss4461 thanks for the reply. Figured the cowitness wouldn't work. I had Hex Wasp that I returned for this sight. Looking forward to trying it out.
@era_97ronin70 Жыл бұрын
Does your back up sights co witness with your front iron
@technickelbliss4461
Жыл бұрын
The factory iron sights would have to be swapped out to co-witness. I haven't changed mine to co-witness.
@ArrowOfTruth01
10 ай бұрын
@@technickelbliss4461 Very late to the party, but do you have any suggestions for iron sights to co-witness?
@technickelbliss4461
10 ай бұрын
@@ArrowOfTruth01 I haven't tried to co-witness with this weapon. I don't really like recommending sights I haven't tried out.
@ArrowOfTruth01
10 ай бұрын
@@technickelbliss4461 respectable, thank you for the response!
@blackthug65 Жыл бұрын
Would this be the same install for the 407k?
@technickelbliss4461
Жыл бұрын
I'm not sure. I know 507k and 407k share the same adapter plate, but because I don't own a 407k I don't want to steer you wrong by suggesting the installs are exactly the same.
@blackthug65
Жыл бұрын
@@technickelbliss4461 no worries! Is this the pro or regular hellcat?
@technickelbliss4461
Жыл бұрын
@@blackthug65 That's a Springfield Hellcat OSP not the pro.
@blackthug65
Жыл бұрын
@@technickelbliss4461 okay perfect! I have the osp as well and may go with this set up.
@jayleaf3502 Жыл бұрын
Do you have a link for the plate ?
@technickelbliss4461
Жыл бұрын
Here's the link. chpws.com/product/springfield-hellcat-to-holosun-407k-507k-adapter-plate/
Пікірлер: 26
that hellcat look really nice with that holosun
@technickelbliss4461
Жыл бұрын
I think so too!
Great job, very informative. Thank you!
Has anyone else, when installing this on a Hellcat Pro had one of the screws go all the way in but the other screw stick up a tiny bit after being torqued (15 in/lbs) down? If so, what was your solution? Grind the end of the screw a little bit? Get a shorter screw?
Would the 509t x2 work on a hellcat? I really haven’t seen any videos of them
Just received this same setup for my hellcat pro. Did you use the screws that came with the mounting plate or the ones that came with the sight? Thanks
@technickelbliss4461
Жыл бұрын
Hi, I used the screws that came with the mounting plate and I put some additional blue locktite on them.
Good video, thank you
@technickelbliss4461
Жыл бұрын
Thank you!
Can you cowitness the irons with the adapter plate and sight?
@technickelbliss4461
Жыл бұрын
The factory iron sights would have to be swapped out to co-witness. In the current configuration I have setup the Holosun and iron sights doesn't co-witness.
@CoyoteBate
Жыл бұрын
@@technickelbliss4461 thanks for the reply. Figured the cowitness wouldn't work. I had Hex Wasp that I returned for this sight. Looking forward to trying it out.
Does your back up sights co witness with your front iron
@technickelbliss4461
Жыл бұрын
The factory iron sights would have to be swapped out to co-witness. I haven't changed mine to co-witness.
@ArrowOfTruth01
10 ай бұрын
@@technickelbliss4461 Very late to the party, but do you have any suggestions for iron sights to co-witness?
@technickelbliss4461
10 ай бұрын
@@ArrowOfTruth01 I haven't tried to co-witness with this weapon. I don't really like recommending sights I haven't tried out.
@ArrowOfTruth01
10 ай бұрын
@@technickelbliss4461 respectable, thank you for the response!
Would this be the same install for the 407k?
@technickelbliss4461
Жыл бұрын
I'm not sure. I know 507k and 407k share the same adapter plate, but because I don't own a 407k I don't want to steer you wrong by suggesting the installs are exactly the same.
@blackthug65
Жыл бұрын
@@technickelbliss4461 no worries! Is this the pro or regular hellcat?
@technickelbliss4461
Жыл бұрын
@@blackthug65 That's a Springfield Hellcat OSP not the pro.
@blackthug65
Жыл бұрын
@@technickelbliss4461 okay perfect! I have the osp as well and may go with this set up.
Do you have a link for the plate ?
@technickelbliss4461
Жыл бұрын
Here's the link. chpws.com/product/springfield-hellcat-to-holosun-407k-507k-adapter-plate/
@jayleaf3502
Жыл бұрын
@@technickelbliss4461 thank you for the help
@technickelbliss4461
Жыл бұрын
@@jayleaf3502 You're Welcome!