Dude. Thanks SO much for the detailed, helpful step-by-step! I successfully replaced my broken striker pin, thanks to you.

@UBRArsenal

5 ай бұрын

I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

Man thank you so much! This video helped me put my Hellcat back together & following your directions made it so easy. I'm so happy I don't have to take it to a gunsmith to get it worked on now lol. You sir are awesome. Thanks again!

@UBRArsenal

Ай бұрын

I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

Clear, concise easy to follow. A rarity on U tube. Thank you this has been most helpful.

@UBRArsenal

Жыл бұрын

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

So far this is the only comprehensive video I've found about this. Most I've seen skip the extractor spring disassembly.

@UBRArsenal

Жыл бұрын

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

Big thanks man. I tore mine down and the extractor assembly took flight on me. This vid was a life save. Helped me know what all parts were missing/reassembly. 👍👍

@UBRArsenal

3 жыл бұрын

Hey Darren, this happen to me too. I think it happens to a lot of people. Glad the video help you out. Thanks for watching and leaving a comment. Have a great day!

@stefanoooo1271

3 жыл бұрын

Bro same thing happen to me ! All most go blind

@davieslocker86

Жыл бұрын

Haha I did the same thing taking my rifle apart thank you KZread lol

@MrFreeMinds

Жыл бұрын

Same exact thing happened to me earlier today. This video saved me from a whole panic attack 😂

Excellent tutorial! New to gun ownership and this gives me complete confidence in cleaning the extractor and (replacing a broken) striker. I've Subscribed and Liked, plus saved for future reference!

@UBRArsenal

3 ай бұрын

I’m so glad you liked the video. Thanks for watching, subscribing, and leaving a comment. Have a great day. 🤜🤛

I really enjoyed this video, it was very clear and detailed. I can honestly say it was the best one I’ve ever seen. I would like too see you make one on the rest of the Hellcat. Thanks, Mike.

@UBRArsenal

3 жыл бұрын

I'm really happy you liked the video. I have other videos featuring the Hellcat. Check them out and let me know what you think. Thanks for leaving an awesome comment and I hope you subscribed. :)

Top quality video instruction. You should add in your title that this is also the same breakdown for the Hellcat Pro.

@UBRArsenal

Жыл бұрын

I’m so glad you liked the video. I will definitely add hellcat pro to the title. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

Absolute perfection! Your clear slow explanation and camera work zoom to the specific pieces and their proper direction was a lifesaver.thanks

@UBRArsenal

Жыл бұрын

Hey Jess, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Can’t thank you enough for this tutorial. The tip of my striker broke off and you just saved the day.

@UBRArsenal

2 жыл бұрын

Hi Roul, I'm so glad the video helped out. Thanks so much for watching and leaving a comment. Have a great day and please tell a friend about the channel. :)

@rtz549

2 жыл бұрын

Questionable durability or heat treat?

@roul3688

2 жыл бұрын

@@rtz549 It happened while dry firing. I had at least 2,000 rounds through and dry fired even more. The manual explicitly states to use a snap cap for dry firing. Apparently I’m not the only one this happened to.

@CRAZEDX100

Жыл бұрын

@@roul3688 when was your hellcat purchased? I've been told the striker was updated by SA for the 'gen 2' hellcat but haven't gotten a solid answer on manufacture dates. I just picked up a hellcat and am seriously considering installing a mcarbo titanium striker assembly before I even fire it.

@roul3688

Жыл бұрын

@@CRAZEDX100 I got mine shortly after they came out, late 2019-early 2020. Use a snap cap when dry firing is my only advice

Thanks for the great video. I haven’t gone into my Hellcat yet. I’ve been watching videos but so many are not clear and way to fast. You go slow and explain everything. Excellent 👍

@UBRArsenal

Жыл бұрын

Hey John, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

Thank goodness for this video I went to put a cool punisher slideplate on my Hellcat today and my finger slipped removing it and the springs came flying out smacked into my ceiling the extractor and spring came out I was so flustered after finding all the parts I watched this video and it helped me get it back together properly thank you so much

@UBRArsenal

3 жыл бұрын

Hi Kaiser, I’m really glad the video helped you get everything back together. Thanks for watching and leaving a great comment. Have a great day.

The two half "cups" for the striker assembly are actually called "keepers". They are used on valve springs for cars and motorcycles also. Edit: Great video by the way. Just bought a Hellcat. So this us very helpful.

@UBRArsenal

3 жыл бұрын

Thanks for the information. I’ve always called them cups or collars. I’m also happy you liked the video. Thanks for leaving a great informative comment. I hope you subscribed. :)

@JIMBOBALOU

3 жыл бұрын

@@UBRArsenal you bet, and I did. Haven't had a chance to check it your other videos yet. But I will

@UBRArsenal

3 жыл бұрын

@@JIMBOBALOU You’re the man. I hope my other videos help too. Thanks so much it really helps me out.

@JIMBOBALOU

3 жыл бұрын

@@UBRArsenal you're welcome, thanks for the good content. Hope to see more of the Hellcat!

@UBRArsenal

3 жыл бұрын

@@JIMBOBALOU I think I have one more Hellcat video coming.👍🏼

Excellent instruction, easy to follow, not too verbose, well done.

@UBRArsenal

2 жыл бұрын

Hey Jake, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 🤜🏼🤛🏼

Second time today I referred back to this video instructional. 💯💯💯💯

@UBRArsenal

9 ай бұрын

Sweet! Thanks for watching and leaving a comment.

perfect as hell! the little rod came out my spring and no one had a video on it 💪🏽

@UBRArsenal

9 ай бұрын

I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

This video was so well done, couldn’t have been any clearer. Awesome job.

@UBRArsenal

2 жыл бұрын

Hey Steve, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Thank you so much for taking the time to do this! I am a neat freak about my firearms and have been wanting to do this but have not been able to find any videos on it. Thank you!

@UBRArsenal

Жыл бұрын

Hey Sayre, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Your camera work is excellent. When I put the extractor assembly back in I used a Roll pin installer punch to push the assembly in. I have had my punch slip off before and launch everything. Its almost like the dimpled pin is a perfect fit to the punch. Great video. Thanks

@UBRArsenal

2 жыл бұрын

Hi Tires, I’m really glad you liked the video. I’ve shot springs across the room too. I’ll have to give the roll pin installer punch a try. Thanks for the tip. Have a great day and please tell a friend about the channel. 😁🤜🏼🤛🏼

Thank you for making such a detailed video, I took my hellcat apart to clean out any metal shavings from milling down the lugs and to make sure the screws holding down my 507k weren't too long and going into the extractor spring.

@UBRArsenal

3 жыл бұрын

Hi Bdkj3e, I'm glad the video helped out. Thanks for taking the time to leaving a nice comment and thanks for watching. Have a great day.

Thanks for the video, the breakdown was thorough and detailed. Much appreciated!

@UBRArsenal

2 жыл бұрын

Hi Fernando, you're very welcome. I'm glad the video helped out. Thanks for watching and have a great day.

Thank you!!! Very informative and easy to follow. Could you do a video on the deassembly and reassembly of the of the frame?

@UBRArsenal

2 жыл бұрын

Hi Carlos, I’m glad the video was helpful. I definitely would do that for you but the gun was on loan from GunPrime. So I had to send it back. If I ever get my hands on another one, I’ll make the how-to video for you. Thanks for watching and leaving a comment. Have a great day.

YOU SAVED MY FUCKING LIFE WITH THIS VIDEO.. was trying to replace slide cover and ended up shooting all the springs and shit out of it...llike allll the parts you just cleaned...THANK YOU!!!

@UBRArsenal

2 жыл бұрын

Hi Amadeus, I know this feeling. I had something like this happen to me. I just bought a brand new pistol and was try to film a how to and one of the springs flew across the room. Luckily I found the spring. I'm happy to hear the video helped out. Thanks for watching and leaving a comment. Have a great day.

@amadeuswolf4628

2 жыл бұрын

@@UBRArsenal thank you again sir!!! i was crawling around on the ground looking for tiny pieces in the carpet like a crack head!

@UBRArsenal

2 жыл бұрын

@@amadeuswolf4628 Hahaha! Ive been there. So I know how it is. Did you find all the parts or did you have to buy any parts still missing?

Glad i found this. Swapped out my trigger to an apex one. When i took the slide cap off the extractor stuff came shooting out as i was trying to take slide cap off and keep eveything from flying out (failed). Anyways that extractor pin is only thing i did not know how it was installed cause it fell on the floor. After this video im good to go now though.

@UBRArsenal

Жыл бұрын

Hey man, we all have been there before. I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

Very good instructional video bud. Just purchased my Hellcat. Its great to see a complete slide disassembly process. Keep up the great work!

@UBRArsenal

3 жыл бұрын

Hi Sunseasurf, I’m glad you liked the video. Thanks for watching and leaving a great comment. Have a great weekend.

Outstanding video; very methodical and patient. I used this to install a Techna-clip to the slide of my Hellcat, and it went smooth as silk. Many thanks, and two BIG thumbs up.

@UBRArsenal

3 жыл бұрын

I'm so glad the video helped out. Also, thanks for taking the time to write this awesome comment and I hope you subscribed. :)

This is the best instructional video I’ve ever seen. I wish I saw a video from you disassembling my Glock for the first time. fuck being a gunsmith, people like you should be teaching.

@UBRArsenal

Жыл бұрын

Hahaha! I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day bro! 👍🏼🤜🤛

This was the biggest help, I express my gratitude enough! THANK YOU

@UBRArsenal

Жыл бұрын

Hi Terry, I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

Excellent video. Well done. Exactly what I was looking for. I appreciate your professionalism.

@UBRArsenal

3 жыл бұрын

I’m really glad you liked the video. Thanks so much for leaving an awesome comment and I hope you subscribed. :)

Great detailed video. Now i feel like a certified gunsmith 👍🏿

@UBRArsenal

Жыл бұрын

Nice!!! Lol I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

Great job explaining things step by step. Keep up the good work!!

@UBRArsenal

Жыл бұрын

Hey Josh, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 🤜🏼🤛🏼

This video is extremely helpful and very professional! Thank You.

@UBRArsenal

2 жыл бұрын

Hi Stephen, I'm so glad this video helped out. Thanks for watching and taking the time to leave a comment. Have a great day.

Hey friend! Many thanks for your video. It was great and very useful!! Greetings from Greece!!

@UBRArsenal

2 жыл бұрын

Hi Buddy, I’m so glad you liked the video and it helped out. I love that my videos are watched around the world. Thanks for watching and leaving a comment. Have a great day.

Super informative, anyone can follow this instructional , I rarely comment but this was super helpful . Thank you .

@UBRArsenal

3 жыл бұрын

Hey, I'm really glad you liked the video. Also thanks for taking the time to leave a great comment and I hope you subscribed. :)

Thank you for this video, your instructions are very ear and precise

@UBRArsenal

2 жыл бұрын

Hi Mark, Im happy to see you liked the video. Thanks for watching and leaving a comment. Have a great day!

great vid. nice easy step by step. good job with the explanation...

@UBRArsenal

Жыл бұрын

Hi Wayne, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

So detailed. Thanks a million 👍

@UBRArsenal

9 ай бұрын

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Nice Job my friend, very well done. Thanks.....

@UBRArsenal

3 жыл бұрын

I'm glad you liked the video. Thanks for leaving a nice comment and I hope you subscribed. :)

Excellent video, very detailed and great close-ups. Keep me posted.

@UBRArsenal

3 жыл бұрын

I’m glad you liked the video. Thanks for the awesome comment and I hope you subscribed. :)

Very descriptive and informative! Thank you my 2A brotha

@UBRArsenal

Жыл бұрын

Hey man, I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

You make it look so easy..I will have to clean mine soon.

@UBRArsenal

2 жыл бұрын

Hi Gnap, thanks but all it takes is just repetition. Once you have field stripped your hellcat a few times it will become easier. Thanks for watching and leaving a comment. Have a great day.

Amazing detail, thank you!

@UBRArsenal

Жыл бұрын

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Dude nice intro. Thanks for the tutorial

@UBRArsenal

Жыл бұрын

Thanks man, I’m glad you liked the tutorial. Thanks for watching and leaving a comment. Have a great day.

Theres no mistakes just happy little brush strokes

Great video

@UBRArsenal

3 жыл бұрын

Hi Joe, I'm glad you liked the video. Thanks for watching and for leaving a comment. Have a great day.

Nice video and without any bs

@UBRArsenal

3 жыл бұрын

I'm glad you liked the video. Thanks for watching and I hope you subscribed. :)

Great video, very detailed.🤗

@UBRArsenal

Жыл бұрын

Hi Charles, I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Great Video! Thank you

@UBRArsenal

Ай бұрын

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Dude, earlier tonight I had to take my slide apart to clean up the striker because it was full of carbon buildup since I am almost at my 1000 round milestone for my Hellcat, and I thought I had my thumb on the back plate properly to keep the extractor spring retainer and Striker sleeve from flying out, and that stupid retainer for the extractor spring launched across my room anyways and it took me almost an hour to find that stupid thing. I almost gave up and thought I was going to have to order another one and I got lucky and found it.

@UBRArsenal

2 ай бұрын

I’ve been there before. I’m glad you found it in the end. Thanks for watching and leaving a comment. Have a great day.

Excellent video

@UBRArsenal

2 жыл бұрын

Hi Jim, I’m so glad you like the video. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. 😁🤜🏼🤛🏼

This helped a lot thank you

@UBRArsenal

2 жыл бұрын

Hi Adam, I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day. 🤜🏼🤛🏼

My extractor pin went flying thanks great video 🤣

@UBRArsenal

2 жыл бұрын

Hey Marcus, I know how that is. 🤣 I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Nicely done

@UBRArsenal

Жыл бұрын

Hi Kenneth, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Awesome video! Great close ups and narration telling all the details as needed. What happens if you accidently get oil into the striker? I mean will it HAVE to be disassembled and cleaned?

@UBRArsenal

3 жыл бұрын

I’m glad you like the video. Yes, you would have to clean it because if you get oil in the striker, you would most likely would get malfunctions like light primer strikes. Thanks for leaving an awesome comment and I hope you subscribed. :)

@houndawg3

3 жыл бұрын

It's not so dire that the striker HAS to be removed and cleaned. The basic rule is to never lubricate the striker. Oil itself would cause no problems. The problem is that when the gun is fired, carbon can get back into the striker hole, mix with the oil, and create a sludge. Over time, sludge buildup can impede striker movement. It's not required to remove the striker every time you clean, but periodic removal, cleaning, and inspection doesn't hurt. While you have it apart, you can clean out the striker channel. A little oil that might migrate into the area when lubricating the slide won't create a life or death situation. Just don't douse the area with oil.

Good job dude!

@UBRArsenal

2 жыл бұрын

Hi Will, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 🤜🏼🤛🏼

⭐️⭐️⭐️⭐️⭐️ video,very informative.thank u sir,God bless

@UBRArsenal

2 жыл бұрын

Hi Glenn, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day and please tell your friends about the channel. God bless you too. 😁🤜🏼🤛🏼

You're a lifesaver

@UBRArsenal

2 жыл бұрын

Hi Colten, Im glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

Thank you😊

@UBRArsenal

4 ай бұрын

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Excellent video bro! It helped me out a lot.

@UBRArsenal

3 жыл бұрын

Hi Dustin, I'm glad the video helped out. Thanks for watching and leaving a great comment.

You da man Harry!

@UBRArsenal

3 жыл бұрын

Hi Joe, I'm glad you liked the video. Thanks for watching and leaving a comment. Have a great day Joe.

Awesome Video , Extremely Well Done

@UBRArsenal

3 жыл бұрын

Hey Mark, I'm glad you liked the video. Thanks for leaving a great comment and I hope you subscribed. :)

Ohhhhhh my F…. In god bro you are a god send. Thank you

@UBRArsenal

2 жыл бұрын

Hi David, I'm so glad to hear the video helped out. Thanks for watching and leaving a comment. Have a great day.

Awesome detail well done

@UBRArsenal

3 жыл бұрын

Hi Eric, I'm happy to hear you liked the video. Thanks for watching and leaving a comment. Have a great day.

Great video - thanks 👍

@UBRArsenal

2 жыл бұрын

Hi Slawomir, I’m glad you like the video. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. 😁🤜🏼🤛🏼

@slawko0079

2 жыл бұрын

@@UBRArsenal I will definitely recommend your channel. Springfield Hellcat (in our case it is HS-H11 OSP) is one of the most popular 9mm subcompacts among shooters Unfortunately, there are few weapons in Poland and there are no such films. Greetings - great job :) 👍👍👍

@UBRArsenal

2 жыл бұрын

Thanks so much. It really helps my channel. Glad I could provide some Hellcat videos. Have a great day.

Excellent job. Do you use some kind of cleaning solvent when wiping down the parts?

@UBRArsenal

Жыл бұрын

Hi Phil, I’m so glad you liked the video. I don’t use any type of cleaning solvents. I know they make stuff to clean this area but as of today, I don’t use anything. Thanks for watching and leaving a comment. Have a great day. 🤜🏼🤛🏼

Good stuff, thanks! 👍👍👍👍😎😎😎😎😎😎

@UBRArsenal

6 ай бұрын

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Well done. You made it look easy, and I know it’s not.

@UBRArsenal

2 жыл бұрын

Hi Mike, I’m so glad you liked the video. I think it looks harder then it really is. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel.

Thank you I appreciate the details !!

@UBRArsenal

3 жыл бұрын

I’m glad you liked the video. Thanks for leaving a great comment and I hope you subscribed. :)

Awesome thanks

@UBRArsenal

3 жыл бұрын

Hi Mike, I'm glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Came to this vid to fix my wife’s hellcat extractor- after many ftf malfunctions i noticed the extractor is loose and leans outward and now i can diagnose why there isn’t enough tension on it…

@UBRArsenal

6 ай бұрын

I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

@jacobmclendon4387

6 ай бұрын

Turned out the shooting was missing 😂 (we bought it used). Have to call Springfield armory to order

Nice video

@UBRArsenal

2 жыл бұрын

Hi Ben, I’m glad you like the video. Thanks for watching and leaving a comment. Have a great day.

Fantastic Video!

@UBRArsenal

3 жыл бұрын

I’m really happy you liked the video. Thanks for leaving an awesome comment and I hope you subscribed. :)

Really good video. Appreciate your knowledge. Details were great, but why would you ever have to take your gun down to this level unless something breaks? Seems to me that normal breakdown and cleaning is more than enough to keep these guns in tip-top shape.and you may be asking for trouble by taking them apart. I have many semi-autos and they are still working fine after years of use.

@UBRArsenal

3 жыл бұрын

Hi WC, some people like to do this every once in a blue moon with the gun they EDC. This way they know they won't have any light primer strikes when they need to use it. For the most part the only time you would need to do this is if you accidentally got oil in the striker assembly or something broke. Thanks for watching and leaving a nice comment. Have a great day!

Very helpful sir.

@UBRArsenal

3 жыл бұрын

Hey TJ, really glad the video helped out. Thanks for leaving a nice comment and I hope you subscribed. :)

My striker moves one placed back in. It rattles. Even before I took it out to look. Thats why I watched this video. But it still does it. I know the plunger stops it for going anywhere but id still like to know if its supposed to or not

@UBRArsenal

2 жыл бұрын

Hi Logan, do you mean, you can hear the striker moving when you shake the pistol? Also, are you just shaking the slide with no barrel and recoil spring or is the pistol fully assembled? If your shaking the pistol fully assembled, try to shake just the slide with no barrel and recoil spring and see if you still hear it. Talk to you soon.

@loganyates4269

2 жыл бұрын

@@UBRArsenal It shakes both ways. Fully assembled and loaded as well as just the slide without recoil spring and barrel.

excellent video !!!

@UBRArsenal

3 жыл бұрын

Hi Elvis, really glad you liked the video. Thanks for leaving a nice comment and I hope you subscribed. :)

Great video. Thank you. One question, my striker assembly is rattling a little bit after the slide is fully assembled. It's this normal or can I do something to fix this? Thanks again.

@UBRArsenal

Жыл бұрын

I’m glad you liked the video. Did you happen to take notice if it rattled before? It should be the same as before. As long as you followed the video, it should be fine. Thanks for watching and leaving a comment. Have a great day.

@j303ti

Жыл бұрын

@UBR Tech I really wish I knew the answer to that. I guess I had a heightened sense of awareness after doing this as I don't know if it did or didn't rattle when it was new. It runs great at the range, so I'm happy. Was considering getting an upgraded striker assembly for it. Thoughts on those?

@johnhenry8124

Жыл бұрын

Hey Joe, did you notice any difference when the gun is “cocked” (ready to fire) compared to when the hammer is down (or fallen) ? The rattling should be significantly less, or maybe even gone, when it’s cocked. And don’t worry…it is completely normal to hear rattling. In fact, I would be concerned if there was no rattle, as that would be a sign of debris in the firing pin channel.

Would it be recommended to use pipe cleaners to clean inside the slide? being sure to keep it dry and free of oil. Since the striker and plunger are out seems like it would be the time to do it. Great explanation, I enjoyed it.

@UBRArsenal

2 жыл бұрын

Hi Michael, I normally put a barrel cleaning patch on the end of a wooden Cuticle pusher to clean the inside of the slide. I use the wooden cuticle pusher so it doesn’t scratch anything inside the slide. I would say you probably could use a pipe cleaner as long as there isn’t any exposed metal. Im glad you liked the video. Thanks so much for watching and leaving a comment. Have a great weekend.

awesome, thank you

@UBRArsenal

3 жыл бұрын

Hi Martin, I’m glad you liked the video. Thanks for taking the time to leave a comment and I hope you subscribed. :)

Thank you

@UBRArsenal

3 жыл бұрын

You’re welcome, I’m glad you liked the video. Thanks for leaving a nice comment and I hope you subscribed. :)

Is there anyway you can remove the front sight & rear sight also from the slide ?

@UBRArsenal

2 жыл бұрын

Hi Miring, are you asking for me to upload a how-to remove the front & rear sights from the Hellcat?

@miring822

2 жыл бұрын

@@UBRArsenal yes please 👍

so the pin in the extractor spring has a double marking on one side. Which way does it go?

After trying to put my extractor spring pin back in i lost my grip on it and the spring shot out. Its been over two months since ive taken my Hellcat to the gunsmith to have them order the spring and reassemble my then 2 week old Hellcat. Theyre still waiting on the spring from Springfield.

@UBRArsenal

3 жыл бұрын

Hi David, I think we all had a spring shoot across the room at some point. It does suck waiting for a part for a brand new pistol. I feel for you. I hope your spring comes in asap. So you can get back to the range with your new Hellcat. Thanks for watching and leaving a comment.

Where do you get that tapered plastic punch ?

@UBRArsenal

2 ай бұрын

I couldn’t find the one I have. They might not make this one anymore. The link below is the closest one I could find. amzn.to/4b5wZdT

@PaulProchko

Ай бұрын

@@UBRArsenal I appreciate you checking. I couldn't find anything like that either. It's a good idea though...handy.

How often does this need done?

@UBRArsenal

Жыл бұрын

Hey Robert, you don’t need to do this often. You can do it at some point when you shoot 1k to 1.5k rounds. The only other time you may need to do this is if you start to get light primer strikes. Thanks for watching and leaving a comment. Have a great day.

👍🏻

@UBRArsenal

3 жыл бұрын

Thanks and I hope you subscribed. 👍🏼

Is firing pin supposed to stick out of the hole inside?

@UBRArsenal

Жыл бұрын

I don’t think the firing pin should stick out. Do you hear the firing pin click when you dry fire the pistol?

@jesuschristfullygodfullyma613

Жыл бұрын

@@UBRArsenal yes. Thanks for response. I subscribe to you.

@UBRArsenal

Жыл бұрын

You’re welcome and thank you so much for subscribing. Have a great day.

Thanks for the video. Iordered a metal striker sleeve for my hellcat and it is a little snug, will it work itself in? Thanks!

@UBRArsenal

2 жыл бұрын

Hi Mo, I swapped to a metal striker sleeve for my HK VP9 and it wasn’t snug at all. I never swapped the sleeve for the Hellcat so I cant really say if it will break in. If you dont mind please come back and let me know if it does break in so I know for future questions like yours. Thanks for watching and leaving a comment. Have a great day.

@ronmoman8825

2 жыл бұрын

@@UBRArsenal Hello, the sleeve was a little snug, no burrs and not stuck. I worhed the slide with my bore sighter and it smoothed itself out really well. Lakeline makes some really good products. I replaced all 5 strikers on all my Taurus pistols, love my Gx4 maybe more than the hellcat, but close. Take care, keep up the great videos.

@ronmoman8825

2 жыл бұрын

@@UBRArsenal Just wanted to tell you the sleeve was not snug in the slide, but on the striker. As i said it worked itself out.

@UBRArsenal

2 жыл бұрын

@@ronmoman8825 Thanks so much for the information. Ill have to check out Lakeline. I also wanted to check out the GX4 and do a review of it. I might reach out to Taurus and see if they would send one out for review. I doubt it but its worth a try. You take care too and have a great day.

@ronmoman8825

2 жыл бұрын

@@UBRArsenal Not only is the gx4 as low as 299.00 the gx4 toro optic ready just released a few days ago. check out kzread.info/dash/bejne/mKp3x9yAYZfdoNY.html. I hope taurus sends you the gx4 toro to review.

Am i the only one who thinks hes explaining this like Mr. Rogers? 🤣

@UBRArsenal

Жыл бұрын

You’re the first to say Mr. Rogers, I normally get Bob Ross. 🤣

Is that striker guide plastic?

@UBRArsenal

3 жыл бұрын

Hi Mike, yes the striker guide is made of plastic.

Does the striker free float and move back and forth sometime to the point of where some would say rattle?

@UBRArsenal

3 жыл бұрын

I don't have the Hellcat anymore because I had to send it back to GunPrime. So I cant check for a rattle myself. When the gun is cleared and you rack the slide. Pull the trigger. If you hear the click, then most likely its functioning correctly. Do you hear the rattle when the slide it locked back?

@willg6997

3 жыл бұрын

@@UBRArsenal hmm, I'll have to check when I get back home. Thank you.

@drew.851

2 жыл бұрын

@@willg6997 did you find out about this? My rattles as well

@willg6997

2 жыл бұрын

@@drew.851 yeah it has a free floating firing pin so it's normal to hear the rattle. If you lock the slide back, you can see it moving or you can move it with your finger.

I just received my brand new Hellcat yesterday and haven't put a round through it yet. I noticed a rattle sound coming from the striker, more pronounced after the gun has been decocked (dry fired) but still there slightly even when cocked. It seems like the striker isn't under constant spring pressure, any thoughts on what could be causing this? Does anybody else have a rattly striker?

@UBRArsenal

2 жыл бұрын

Hi Jack, I just checked the Hellcat RDP I have here and it doesn't rattle at all. If it were me, I would remove the slide from the grip and shake just the slide to make sure its definitely coming from the slide. After you have confirmed the rattle is coming from the slide and you feel confident enough to disassemble the slide. You could disassemble the slide and make sure everything looks good with the striker assembly. If you dont feel confident with the disassembly just give Springfield a call and see what they say. Either way, let me know how you make out.

@jackfrederick3663

2 жыл бұрын

@@UBRArsenal Thanks, I shot a quick video of the rattle I'm getting (kzread.info/dash/bejne/eGxmvM9qd6vVqqQ.html). I didn't shake the grip itself in the video, but I did later and the rattle definitely seems to be coming from the slide assembly- specifically the striker/firing-pin assembly. Next step will be to try to take apart the slide, following the steps outlined in your video.

@UBRArsenal

2 жыл бұрын

@@jackfrederick3663 Let me know what you find after you disassembled the slide. Thanks Jack.

I accidentally let the extractor spring plate go when I was switching out the backplate and it went flying somewhere in my kitchen and now it seems to be lost. Lol idk what to do now. I hit up Springfield but they haven’t got back to me. Lol

@UBRArsenal

3 жыл бұрын

It happens to all of us. I guess this will be a good test to see how Springfield’s customer service is. Worst case you can just buy an aftermarket one. Let me know how you make out.

@miztrusa

3 жыл бұрын

Keep pounding SA.... Or look for aftermarket.... 😁

Need to increase your volume. I had my iPad on max audio and could hardly hear you.

@UBRArsenal

3 жыл бұрын

Hi Monroe, thanks for the input. I think on my current videos, I have increased the volume. Thanks for leaving constructive criticism. Have a great day!

@monroebryant4160

3 жыл бұрын

Sure, the video was terrific.

@UBRArsenal

3 жыл бұрын

@@monroebryant4160 Thanks! I’m glad you liked the video. Thanks for watching!

Who's here because the shitty Croatian design striker on their hellcat broke?

Your the man bro. I subscribed getting friends that love guns to join too. Very good program

@UBRArsenal

Жыл бұрын

Hi Dough, thanks so much for subscribing. It helps in so many ways. Also, thanks for trying to get your friends to subscribe too. I’m so glad you liked my channel. Thanks for watching and leaving a comment. Have a great day. 👍🏼