*1) RPM / Throttle Matching / FOC:* 1= Enabled 2= Disabled *2) LiPo Cells:* 1= Auto 2 = 2S 3 = 3S *3) Cutoff Voltage (per cell):* 1 = Disabled 2 = Low (3.0v) 3 = Intermediate (3.2v) 4 = High (3.4v) *4) ESC Thermal Protection:* 1 = 105°C / 221°F 2 = 125°C / 257°F 3 = Disabled *5) Motor Direction:* 1 = Counter Clockwise (CCW) 2 = Clockwise (CW) *6) BEC Voltage:* 1 = 6.0v 2 = 7.4v *7) Drag Brake Force:* 1 = Disabled 2 = Level 1 3 = Level 2 4 = Level 3 5 = Level 4 6 = Level 5 7 = Level 6 8 = Level 7 9 = Level 8 *8) Drag Brake Rate:* 1 = Level 1 2 = Level 2 3 = Level 3 4 = Level 4 5 = Level 5 6 = Level 6 7 = Level 7 8 = Level 8 9 = Level 9 *9) Max Reverse Force:* 1 = 25% 2 = 50% 3 = 75% 4 = 100%

@BigSungHobbies

4 ай бұрын

Thanks for the summary. I have pinned it.

I always liked the easy programming from hobbywing.

@BigSungHobbies

2 жыл бұрын

Yes, they definitely make it easy especially on 1080 and Fusion, plus they include the programming card in the package.

Nice work! Really clear and well explained. Happy trails. 🤙

@BigSungHobbies

2 жыл бұрын

Thanks! 👍

Great video and information on how to program.

@BigSungHobbies

2 жыл бұрын

Thanks for watching!

Thank you! I ordered a Fusion SE to put in my Sendero SE. As have multiple 1080 program cards, I didn’t order a program card for the SE. I was under the impression, Hobbywing included a decal to apply to tihe 1080 program card? Well no decal was provided, so your video was exactly what I needed to get it up and running. Thanks again! 👍🏼

@BigSungHobbies

Жыл бұрын

Ahh that must be the cost cutting on Fusion SE. I know that the more expensive Fusion Pro includes them. Additionally if you look for the manual, they should include include the information as well.

@dezfan

Жыл бұрын

@@BigSungHobbies manuals? What’s that? 🤣. Thanks again. Keep up the great work.👍🏼

@BigSungHobbies

Жыл бұрын

Hehe! Thanks and happy RC'ing.

Thanks so much. Trying to get more to my steering servo.

@BigSungHobbies

2 жыл бұрын

Thanks 🙏

Great work!!!!

@BigSungHobbies

Жыл бұрын

Thanks 🙏

Thank you. 👍

@BigSungHobbies

8 ай бұрын

You are welcome!

Great video! Don’t forget to calibrate

@BigSungHobbies

Жыл бұрын

Good call!

Wow!!! this is too-easy for progam set-up. (B+)

@BigSungHobbies

2 жыл бұрын

Yes, you are right.

So this is a question about the HW Fusion 1800. I have a strange issue; not sure if issue or feature but here goes. So I set the drag braks ( setting 7 ) to the max 9. It seems though that anything I set on Drag Brake Rate ( setting 8 ) has no effect .. or only partial. Even set to 1 if I shortly blip the throttle, instantly as I let go the wheels lock up again. Only if I full throttle it for about a second and let go it will slow down gradually to a stop. Again ... only with throttle blips ... it immediately locks up as soon as I let go. As a comparison I also have a AXE 550 R2 and that behaves much smoother while braking even if I only blip the throttle. Can you confirm this behaviour on the Fusion system ?

@BigSungHobbies

2 жыл бұрын

I am not sure exactly, but I found that having drag brake too strong didn't work too well, so I set mine to more moderate drag brake, and that provided enough drag brake for crawling. Might want to try changing that first and see.

I use 1 steering servo and 3 micro servos. The steering servo is a high voltage servo. What is your suggestion for item number 6 (BEC VOLTAGE)?.

@BigSungHobbies

Жыл бұрын

Most micro servos are capable upto 6.0v, so there is really no option than to just go with 6.0v, unless you have micro servos that can handle 7.4v. For my setup where I also use high voltage steering servo, I set it up as direct powered, but on BEC Voltage, I select the 6.0v.

Did they discontinue the 1200 fusion pro and 1800kv?

@BigSungHobbies

10 ай бұрын

They have discontinued the Fusion 1200kv. The 1800kv version is being sold SE version (a bit simplified version, but a much lower cost). And they have added the 2300kv version sold as Fusion Pro.

Do you recommend 1800 or 1200? Ever fit one in a Capra?

@BigSungHobbies

2 жыл бұрын

Personally I prefer the 1800kv, but I am not sure if it will fit in Capra unless you mod the skid/tray. It might be a bit too long, but I haven't tried it on Capra, so not sure.

@brianonthego

2 жыл бұрын

@@BigSungHobbies thank you. I ordered the 1800 for my scx10 ii. I guess with the Vader skid, it will fit in the capra.

@BigSungHobbies

2 жыл бұрын

Yes, with Vader skid, it should fit...I haven't tested, but I have seen few folks that made it work.

@P_double_H

4 ай бұрын

Only order the 1200 if you are going to do rock crawling only. The 1200 packs a lot of power but the speed is very slow to bash around.

Does the program card for a HW1080 work in a Fusion Pro?

@BigSungHobbies

Жыл бұрын

Yes, it does. The program card is all the same. The only difference is the sticker attached to the program card. Fusion Pro comes with a sticker that you can use...that's what I did with mine.

@zacf85

Жыл бұрын

@@BigSungHobbies thank you!

@BigSungHobbies

Жыл бұрын

You are welcome.

Now in 2300kv 👌

@BigSungHobbies

Жыл бұрын

Yes, can't wait to get hold of one at some point.

Just bought the Quickrun fusion SE... CANNOT get motor to reverse rotation.. The video was no help..

@BigSungHobbies

Ай бұрын

Setting 5 lets you choose motor rotation on Quicrun Fusion SE, option 1 CCW & option 2 CW. You can download the manual here: cdn.shopify.com/s/files/1/0109/9702/files/Manual_HW-SMC319DUL_QUICRUN_Fusion_SE_20220722.pdf?v=1669157586