Hobbywing 1080 ESC in Traxxas TRX4! The BEST ESC?
Today I install a Hobbywing 1080 ESC in my Traxxas TRX4! I also show how to make an adapter in order to run the Traxxas light kit. I picked this ESC up at a swap meet earlier this fall and have been extremely impressed with how well it performs! If you're looking for an upgraded ESC for any 10th scale crawler, this is my go to option.
Buy one here: www.amainhobbies.com/hobbywin...
-----------
Outro Music: By - CinderStudios
-----------
Пікірлер: 19
Tie the wires together put the soldering needle under the wire, let it heat up and then touch the top of the wire with solder while tapping the solder needle so it melts together really nice.
@3DudesRC
5 ай бұрын
I need a higher power iron, it doesn’t quite get hot enough to solder the bigger wires properly lol. I just haven’t wanted to spend the money on a new one because I really don’t solder all that much. Thanks for watching!
Great job There! Definitely one of the best brushed ESCs out there. I have several installed. Another good place to add a jst for the lights is to solder one on to the ESC with the battery lead when you change the plug. Keep up the great work. ✌🚙
@3DudesRC
Жыл бұрын
Thanks! That's a good idea as well, not sure if my solder skills are quite there yet tho! Appreciate you watching.
Pretty straight forward. 👍🏽 Thanks man.
@3DudesRC
Жыл бұрын
Yep. It’s a great upgrade and pretty simple to do! Glad you liked it!
Get yourself a tin of soldering flux. Dip each wire into the flux before heating it and then apply solder to each bare wire end. This is called tinning. Next just hold the pieces to be soldered together and apply heat. The solder will flow neatly together.
@3DudesRC
Жыл бұрын
Thanks for the tips! I’ve tried using flux before but didn’t have much luck. Maybe I need to get a new batch. I also think I need a higher temp iron. I’m still very inexperienced in my soldering skills so I’ll take all the help I can get! Thanks for watching!
thats awesome man!!!! really cool how you can get rid of the high pitch noise when your barely touching the throttle! also what swapmeet did you go too? i havent been to one yet but i really want to
@3DudesRC
Жыл бұрын
Thanks! Yeah I was super impressed! We went to the one at Walter RC Park in September, they have it every year. It was my first time going.
@JustGrant25
Жыл бұрын
@@3DudesRC cool! Maybe I can go next year! 🤔 thanks!
@3DudesRC
Жыл бұрын
@@JustGrant25 That’d be cool! No problem!
Im doing the same thing right now with my trx4, are you still able to use your traxxas transmitter? i only ask because i have everything installed an hooked up, lights are on but motors not running, esc lights are on, but no sounds.. kinda lost.. any idea?
@3DudesRC
11 ай бұрын
Yep traxxas transmitter still should work fine. I’d start by double checking the channels you have everything plugged into. Hope you get it figured out, let me know if I can help some more! Thanks for watching!
How did your mini servos do at 7.4 volts ?
@3DudesRC
6 ай бұрын
No issues to this day!
@caseyrobinson6218
6 ай бұрын
@@3DudesRC awesome got my servos on 6.0 volts in my k10 I have a sport that I have on 7.4 but it doesn’t have the little servos for diff lock thanks for the speedy reply earned a sub from me
Atrocious soldering, shorting out the receiver and ESC's BEC with exposed wires, powering the light module from the receiver and not directly by the battery... C'mon dude...
@3DudesRC
6 ай бұрын
😂No issues after a year! It’s not the prettiest, but it gets the job done! Thanks for watching!