Very good video keep working on your hobby very detailed information thanks for sharing with us rc hobbyists

Bashing at its finest. Good show.

Awesome video, great detail keep up the good work

Thanks for the review getting ine for my rustler

Thanks for the Review (? I'm looking to get one 4 My slash

Dude the reason the motor got hot in your hand was because you need load in the motor so that it doesn’t blow itself up from too high of rpm’s

I bought mine about 3 months ago straight from hobbywing, with traxxas connectors installed

@acesrcs588

3 жыл бұрын

Link?

@smoksta420

3 жыл бұрын

@@acesrcs588 www.hobbywingdirect.com/products/ezrun-max8?variant=39246697300083 and select trx plug under the options

For my 2wd slash I drilled a small hole in the chassis to pass a zip tie thru to t hold the esc down,btw I know it’s way faster in person then on video lol I hate that

Nice really nice 👍

Cool video man. Snow dusted mountains, what city is this? I grew up in Ridgecrest,CA and Sierra Nevada mtns would look similar during winter. Looks like Lancaster/Acton area! Many good bashing spots if you look for them

I have that in my slash 4x4 it goes about 80mph on the gearing I have it on but I have a roll cage instead of a body it doesn't make lift

Got the same set up on my vendetta u think its safe to run these with the high speed pinion?

Good afternoon! I discovered this week the ESC Max10 Sct 120a - RTR. Is this RTR version original? working fine? I was afraid to buy. what do you say?

yo bro i need your help cos idk do i have buy new chassic like the one lcg chassic kit slash cos the orginal chassic i have 17 5mm pinion on my 3200kv motor and the pinion sound terrible so daam loud noise so do i need buy new chassic?

Try adding some turbo timing at about the 3 second max throttle. Should give you a little more top end and 4 seconds to get up to speed

Hi I have a traxxas e maxx and was wondering if there is an upgraded chassis for it and if so what website can I buy it from

whats the part number for the pinion you recomend

Would the 3200kv Motor not would be better?

You didn't mess with the settings? The controller box you can buy lets you change settings easy. Ive had a 4000kv and max10 for a few years and it still performs, cogs a bit at low speed but its sensorless.

Does the esc connect into the stock tqi reciver?

Lmbo. Training mode activated.

do i need a new controller with this upgrade?

Dose it fit on hobbywing 2400kv motor

Did you have to use a program card

Like a 30 32 waist and I usually use 1X or 2x shirts

How did you get the TRX battery connector on there

Got the same motor in my stampede

Should I buy one too

what esc did you use?

.8 and 1.0 mod refer to the great pitch… you will strip the pinion and or spur if they don’t match…

the max 10 does come with mounting maybe its cuz you got it from ebay

You said you bought this from eBay? Do you know which seller? I'm looking for a Traxxas plug myself.

Glue a thick zip tie to the ESC and wrap it around the radio box lol

How you gonna blame the tape?

Quick question, im considering doing this on my stampede but theres one thing im unsure of. If I change the Esc do I need to reconnect my radio?

@CarlosJimenez-ty9hz

2 жыл бұрын

Receiver is not the esc.

The small opinion the easier it is on the motor and ESC

All opinions break it doesn't matter what they are I use Robinson racing too but I broke like five or six of them on 3s

How's your Hobby Wing EZRun Max10 SCT working out for you? I've got the Hobby Wing EZRun Max10 SCT combo with the 3200kv Hobby Wing motor on my slash 4x4 and I'm loving it. I've been running it on either my 2S 7600 mah or 3S 4000 mah Traxxas LiPo batteries. I'm running a 13 tooth Robinson Racing Pinion with the stock 54 tooth spur gear and slipper clutch. I actually mounted my ESC with the battery leads facing towards the center drive shaft and I haven't had any problems. Used the flat plastic mounting plate that came with the ESC to install it in the same location where the old ESC was mounted.

@acesrcs588

3 жыл бұрын

yea mine didnt come with mounting sadly. but as far as the max 10 goes its amazing I have the 4000kv motor with Robinson racing 12th gear and Robinson racing 54t tell spur as well. and my slipper clutch is bigger its the one you get with the revo so it las longer. and I have the 3s 5000mah traxxas batterys but my max10 can do 4s so I'm looking into 4s power hobby 7600mah ones that seem nice. but yea I love it great power and reliable for a decent price.

@RDEnduro

3 жыл бұрын

@@acesrcs588 dont run4s on the 4000kv

@acesrcs588

3 жыл бұрын

@@RDEnduro why?

@AndyMoulton

2 жыл бұрын

@@acesrcs588 I believe the HobbyWing 4000kv motors are rated at 2S/3S

@MatMabee

2 жыл бұрын

@@AndyMoulton What's gonna happen? Uh oh, blew a motor worth $50. Uh oh, blew an ESC worth $50. Bro these things are practically disposable I run my 4600 on 4s with a fan.

What spur gear?

Did you got scammed? No hobbywing sticker on esc. Other power switch

mate if i did not find this video i would still be searching for a esc with a trx plug these things are so hard to find .

I did this same conversion but left stock motor. Car feels like crap compared to the traxxas esc, with the max10 it has delay in the throttle and cogs when setting to higher punch settings.

@straight_six7269

Жыл бұрын

Really? I was about to do the same

My velineon vxl 3500kv motor just broke so i’m looking for a new one, I’m considering buying Ezrun. What do you recommend, just going with a new velineon or buying a ezrun motor. I couldn’t find a good comparision between Ezrun and the velineon system. Is there any difference between them?

@acesrcs588

3 жыл бұрын

velion motors are good but terrible at the same time I went through 2 of them in the span of 3 months. and if you went with hobbywing you would have to buy the combo as the motor is not compatible with the velion system. and the difference is the max 10 can do 4s @120amps and if u get the 4000k motor its much faster I recommend not going over 17tooth for general bashing for your pinion. let me know if you have any other questions.

@ValFPV

3 жыл бұрын

get a surpass hobby KK series motor, super cheap but still nice and powerful :) A 3660 would be a good upgrade compared to the stock 3650!

@MrJoey478

2 жыл бұрын

Bro go back with the Traxxas Setup. If your esc or motor has any issue call up traxxas to do a power up trade or deal thingy. I been running traxxas systems for a Lonnng time and just like other combos they had their problems but traxxas trade in's always came through. Yes there's better systems out there but traxxas are decent.

@danylgoutier9782

2 жыл бұрын

Update: I decided to go with the Ezrun anyways, I've used it for a couple of months now and i'm super happy with the performance. The motor has better handling, more power compared to the velineon vxl, and is superior in the quality of manufacturing and materials. Not to talk about the heat dissipation that's faster and more efficient. And all this for less money. I strongly recommend the Ezrun 3660SL 4000kv for the traxxas 4x4. I did have some problems running 4s on the setup, but even with 3s i'm hitting speeds close to 100kmh. Hope this information helps :-)

The esc comes with a mounting plate. You didn't really think the tape would hold, did you. Also 4000kv for bashing is kinda high. May run into heat issues.

@acesrcs588

3 жыл бұрын

it didnt. beacuse this one was a knock off. also no heating issues :)

@Murdered5.3

8 ай бұрын

I’m thinking about getting the 2400kv one for mine is that good for bashing?

@terryfrome1641

8 ай бұрын

@@Murdered5.3 the 2400 is perfect for bashing. That motor can run up to 4s lipo. 3s is plenty for these smaller cars

@Murdered5.3

8 ай бұрын

@@terryfrome1641 awesome

im still trying to understand but will a EZRUN 3652 SL G2 Motors be close to a 540

@ominousnefarious5919

Жыл бұрын

A 540 motor is a brushed motor. But technically speaking a 3650 brushless motor is the sane size physically to a brushed 540. So a 3652 is only 2mm longer than a 540 and its the same diameter as a 540.

Thx this was helpful 😁

Ooowwww lmao thank you for the guide

1/10 or 1/8 ?

Would this work for a gas Losi LsT2?

@acesrcs588

3 жыл бұрын

it should. really depends though this motor and esc are really meant for a 1/10th scale. so if that los is a 1/10th you should be good.

Hi, is there no motor temp cable on the esc?

@acesrcs588

3 жыл бұрын

Not on this knock off! This is not an official hobbywing esc (I didn't realize that until later) so no there is not but if I get an official hobbwing esc there will be

will it work on my slash 2wd brushed? to convert it?

@acesrcs588

3 жыл бұрын

yes this will fit most 1/10 scale vehicles.

@xts_eddy9527

3 жыл бұрын

@@acesrcs588 ty

Would you go with the 4000kv again? I am thinking about the same combo with the 4000kv. I usually run 2s and I am building a track in my back yard.

@acesrcs588

2 жыл бұрын

oh yea for sure! i love this thing ive never had an issue and it can do 4s!!

@Fenolly

2 жыл бұрын

@@acesrcs588 really 4s? On site it says that esc 2-4s but motor 2-3s, and I dont know that i can do 4s, im scared of destroying it

@dardenoakley8432

2 жыл бұрын

@@Fenolly you can if you get the max10 combo that’s paired with the 4600kv or 4000kv motor iv I’m not mistaken ,and they’re 4s capable check Amazon and read specs on there ,

@dardenoakley8432

2 жыл бұрын

And Anthony I would go with the 4000kv personably ,I have two max 10 3200kv combos and they’re crazy nice and VERY strong /fast , but as iv came to control them better and better I want a little more rpm ,

@jbowman18

2 жыл бұрын

@@dardenoakley8432 there's a lot of confusion on the MAX10 battery combo on here. Assuming you're talking the EZRUN 3660 SL G2 Brushless motor (or it's little brother, 3652), the 4000 and 4600kv motors are NOT 4s rated. Per Hobbywing, the 4600kv is only 2s rated and 4000kv is only 3s. Basically you risk overspeeding the motor. kv refers to RPM/V, so if you have a 4000kv motor with a 2s LiPo (nominal voltage of 7.4v), it works out to be 29,600 RPM (7.4 * 4000). Now put a 3s LiPo (11.1v) you're pushing that motor to 44,400 RPM. Put a 4s and you're hitting 59,200 RPM. That's when you start having magnets separate and gears exploding. (I used to design electric motors coupled to turbo chargers spinning up to 125,000 RPM for F1). At the end of the day, motors are dumb and are only current limited in that you can only push x amount of current until things melt. Increase the voltage, and you can pump more power at the same current (P=I*V), which in a motor's case equates to higher speed. Now all this said, you MAY get away with it if Hobbywing has a big safety factor on their design and in fact can handle 60krpm. I would air on the side of lower kv and increased gearing, while actively managing the increase in motor and ESC temps associated with it. As a general rule, I don't trust specs on Amazon, I go to the manufacturer.

Do you have a link for that pinion?

@acesrcs588

3 жыл бұрын

vortexhobbies.com/robinson-racing-pinion-gear-xtra-hard-5mm-mod-12t-rrp8712-p-61238.html

Does anyone know how to change the mode from lipo to nimh on a max10 sct

@acesrcs588

2 жыл бұрын

its only lipo!

@broken_sticks1880

2 жыл бұрын

@@acesrcs588 It says on the max 10 sct that you can use a nimh or a lipo

@davelongnut6657

2 жыл бұрын

@@broken_sticks1880 plug it into a program card

Is the hobbywing adapter male or female?? Cuz I'm tryna look for one that fits the traxxas battery:(

@gamingboyzav9369

Жыл бұрын

what I'm going to do is buy the male port that fits my battery's and solder it on. And just look up what type of port you have and I brought mine off eBay

What tires do you run?

@acesrcs588

3 жыл бұрын

Proline Badlands!

Do you think it will fit a traxxas max

@acesrcs588

3 жыл бұрын

if its 1/10 and uses a 1/10th scale motor then yes.

I have the 3200 kv and the sct max 10

@acesrcs588

3 жыл бұрын

haha nice! how good is it ?!

even tho the esc is a clone how did it hold up thinking bout getting one

@acesrcs588

2 жыл бұрын

It was doing good until it hit water so just try not to take it through a load of water and it should be fine!

It doesn't need to be ABC because it's not sensored

So this esc clone are 100% waterproof?

@acesrcs588

2 жыл бұрын

I drove it in water no problems I did upgrade to a REAL hobby wing max 10 though.

@BR-nd7yc

2 жыл бұрын

@@acesrcs588 so the clone esc still in you? Mybe u can do another video for wterproof test to your content

Maybe try making a flat mounting surface with some epoxy or even hot glue. Cheap but very effective.

@acesrcs588

3 жыл бұрын

i used epoxy. First time it fell off, but second time I used a lot of it and so far its in pretty good!

@Joepat_04

3 жыл бұрын

I bought an sct mounting plate, got some double sided foam tape, and it's never fallen off.

Vice une plaque de plastique ou il a lés trou d’origine du esc et colle le nouveau esc sur la plaque!!

Things for the video

Hi RC Pros. Im a rookie at this ha ha ha I need some real help hahaha Here it goes I have Brushless Traxxas Rustler i bought brand new. The original Traxxas 3350R Velineon VXL-3s Waterproof Brushless Power System burned on me in a week after i did the speed gearing 31/76. Now i have a Hobbywing 2600kv with the hobbywing max10 esc and running a 4s Traxxas 6700mah lipo. with gearing of a 76 tooth haha i dont know what my pinion is. I want go faster. What gearing should i use on the hobbywing 2600 or motor. Thanks reply asap haha

@acesrcs588

3 жыл бұрын

yea if ur using the high speed gear for a long time ur motor will get very hot haha. as for as hbbywing 17tooth is border line max for bashing. but I use a 12tooth because I really only bash and my motor never gets too hot like I can still touch it.

What about some driving lessons? Thanks for the video bud

@acesrcs588

2 жыл бұрын

😂

Upgrade your pinion

use double sided tape

Make a mountain plate out of a piece of plastic

The VXL system in my Stampede 4wd VXL has the RARE 3355X esc, not the 3355R most have. The motors you all have are 3657 size, not far off from a Hobbywing 3660. So no real massive torque change there. The 3s VXL 3355X & 3355R are both 200 amp constant ESCs , not 120amp.constant like a MAX 10. So the VXL 3s 3355" has a higher amp rating, no real gain there, actually a loss. The MAX 10 120a has a much higher burst amp rating but that is counted in seconds and only used if the motor calls for it, this motor in this weight of a vehicle simply will not ask for that burst rating. My Stampede and my Rustler both were set up for handling FIRST so when I changed out the Rustler's running gear for a Sidewinder 4 and a 5750kv Purple, hand wound, inrunner JET MOTOR it already has better shocks, turnbuckles, hubs and was shimmed and balanced with toe and camber set, so it NEVER FLIPPED OR ROLLED OVER! If you wanna make your Traxxas a "go fast" then pay for better handling FIRST, then stick something bigger and better than what u got stock,not something even with or less than. Like dude said,get a Surpass KK or even a 3670-3600kv HobbyStar can be had for $39 on the bay. A real budget upgrade motor would be the Trackstar 5.5t SCT , its a true 550 size motor and is only $55, it is SENSORED AND has Adjustable Timing!!!!!!! Seriously, pair that with the RARE Traxxas 3355X which as i mentioned is 200amp and SENSORED and can ONLY be found at RC MART and is only $80! You will absolutely LOVE what your truck will perform like with that setup, i know, its what i put in my LCG Slash slider and stuck foam tires on it, hits 95mph on 3s on pavement and with belted offroad tires it easily does 80mph on 3s in the dirt!!!!! I have gps AND a radar gun... so im not guessing.

@jamesplymire5342

Жыл бұрын

That's the OLD 2-Pole VXL esc. The 3355R is the new one. New system has more torque.

@pug2451

Жыл бұрын

Which motor and esc combo you ran on ur 90mph lcg slash? You said two different ones which one should I go?

That looks like Utah ⛰

@acesrcs588

2 жыл бұрын

yes it is! you from here?

@broken_rcs3121

2 жыл бұрын

@@acesrcs588 yes

@acesrcs588

2 жыл бұрын

@@broken_rcs3121 what part?

@broken_rcs3121

2 жыл бұрын

@@acesrcs588 bountiful you?

@acesrcs588

2 жыл бұрын

@@broken_rcs3121 nice! im inEagle Mountain!

Velcro man

Bodging at it's best.

Should be a 32p pinion but .8 module is close enough to fit. 17t pinion with a 4000kv motor is too high. Also the 4000v motor with that esc isn't rated at 4s

Nice Wipeout!! 🤣

steering trim

Get a hot glue gun and set ESC,..easy and quick..