Cocomelon in the background lets me know this dood a real og, i see u!

Nice work

Watching on break right now bro bro 😎

Get rid of the background noise.

I installed that Mcarbo kit in my VP9 and it changed the reset. Stock, it had a very strong and positive reset but after the kit installed, the reset was very weak and could barely feel it. How are you liking the Lobos trigger?

@Yakplanet_tv

2 жыл бұрын

I was not use to the reset on the new spring. But I kinda like it. A bit getting use to it. But it is very light. I would focus on the reset and if I shoot it or pull the trigger I would not notice the reset. But only if I focus on it I will hear it. And also the lobos trigger. Is amazing. Stock trigger pinches my finger if I hold low at trigger but the lobos covers it and it fits really well. Very easy to install. Other then that. I will do a small testing shooting video later. And give my thoughts how I feel. I do need time to get use to it.

@awokeone7997

2 жыл бұрын

@@Yakplanet_tv the reset is too light for my liking, I like a nice hard wall, kind something to prep your trigger pull and with the weak/light reset, I just blow by the non existing wall but only on the reset. The Lobos triggers looks good and like the fact that looks more like a flat trigger instead of the curve of the stock. Just wish I can take down the trigger pull weight to about 4-4.5lbs.

@Yakplanet_tv

2 жыл бұрын

@@awokeone7997 I think with a slightly bigger spring. In between the stock spring and the m-carbo spring. Would probably be perfect for you. This spring is pretty light pull. But I know what you mean. Kinda like preparing your trigger pull from every initial shot, with the stock spring. With the new spring you really can't prepare for it. It kinda just.. pull and click. 3lbs is pretty light. I would think 4 to 4 1/2lbs would be perfect. With the new trigger. It makes the feel much more comfortable from the ergonomic. It feels like a flat trigger. But when resting your finger on it, it forms to your finger really well. More surface then stock. My stock trigger sometimes bites my finger. (While shooting fast and dumping mags) well see how the new one does to my liking.

How did you get the letters on the slide in white? That looks sick!

The video was helpful but truly how hard you feel this was and do I need to remove third pin and striker mechanism to change the trigger ?

@Yakplanet_tv

4 ай бұрын

There's one pin holding the trigger. And yes remove the trigger housing. All separate.

@Yakplanet_tv

4 ай бұрын

Wasn't hard for me. Just trying to explain was awkward for me

How did your VP9 feel afyer these upgrades?

@Yakplanet_tv

Жыл бұрын

I have a video up testing it out. Feels like a 1911 style trigger. And the way it resets is audible

Bro I got every part out including the springs under the recoil block and the slide lock. Still can’t get this god damn pin out!! Omg

@Yakplanet_tv

Жыл бұрын

Take some patience. And work it slowly. Pry it but make sure you don't damage your frame.

@mr.blanco6763

Жыл бұрын

@@Yakplanet_tv there gotta be a tool that can help better. What do you think of pin pliers? They look mad small

@Yakplanet_tv

Жыл бұрын

@@mr.blanco6763 not sure. I used my pliers and manage to get right under that pin. And used the locking block to pop the pin out. It is a little hard so gotta put some ump in it

@mr.blanco6763

Жыл бұрын

@@Yakplanet_tv I got it out bro!!!!! Hair dryer for 5 min did the trick!

@Yakplanet_tv

Жыл бұрын

Nice hahah a little heat did the trick.

Which handgun is this again??

@Yakplanet_tv

6 ай бұрын

Hk vp9

I fell asleep around 7 mins 50 secs into the video.....I don't know what happened!?

@Yakplanet_tv

5 ай бұрын

My boring voice in monotone. I'll step it up next time with some cocomelon

I ended up taking my gun to a gunsmithing and even he can't get that stupid pin out from the inside

@Yakplanet_tv

2 жыл бұрын

I used the pliers to push it out. It's easy after the first try.

@mgmmaze

2 жыл бұрын

@@Yakplanet_tv I used pliers, screw driver, Allen keys. The frame will prob crack before I get that thing to move

@Yakplanet_tv

2 жыл бұрын

@@mgmmaze push it against the metal it will work.

@asdfghjk2933

Жыл бұрын

@@Yakplanet_tv Yep. First time I had to get it done by a gunsmith. now, it comes out easily with a bit of force from a flathead screwdriver. 100x easier after that first time.

It would have been better if you didn't have that distracting talking from the TV on in the background

@Yakplanet_tv

6 ай бұрын

Yeah that's my bad. I have a hard time focusing on one thing.

Hack job. Thumbs down