Another great video Newfiebort. Keep them coming. I am especially interested in seeing the follow up videos to this one. Thanks for posting them.

@HomeTechDIY

6 жыл бұрын

Glad you are enjoying the vids!!

@jalalrana

3 жыл бұрын

@@HomeTechDIY great video - can I add a newer HIKVision camera (DS-2CD2086G2-I) to this old 7600 series? Not sure about any compatibility issues? Thanks for your help

Can you do a video on how to setup motion detection and push email notifications

Really appreciate your videos. I have searched unsuccessfully for a video on how to do audio out with this DVR and the "S" versions of the HIKVISION cameras. It would be great if you could do a series of videos on this. The use case would be wanting to say something to someone/thing you see on camera. Three different ways for the audio to be supplied, by mic in the back of the DVR, through the web interface/PC and through a the android app, iVMS4500. Nobody has video like this you would be the first!. Also interesting is some kind of PoE "tap" device to draw 12V power for the speaker. Keep up the good work and let me know what you think of this suggestion. Cheers!

@HomeTechDIY

6 жыл бұрын

Thanks Matthew! I will move this suggestion up in my list of videos to produce.

Does the remote control unit work properly? I have problems with my supplied remote control for the exact same model.

Thanks

I’ve been looking at these for a while, they look really good at a great price. But can ask a couple of questions? How easy is it to set up the network (I am clue less in this) I had experience of setting an ip camera a few years ago and it put me off, in the end I just couldn’t do it. And the other question is, can you view recorded notifications from your mobile app when your away. Great video by the way. Regards James

I just purchased a Hikvision DS-7608NI-I2 NVR and was wondering what cameras would be compatible? The authorized dealers like (B&H photo) want ridiculous prices for their cameras. All I need to do is set up a few cameras and hook them up to the NVR and leave it be. I'm not sure firmware updates are necessary for the camera??? Is it a bad idea to get a english version Hikvision camera off of ebay?

Hello dear, I want to clarify the sound numbers when installing a microphone for the hikvision nvr ds-7616ni-12

There was a blue bar in playback mode with red highlights showing events. Does that mean you switched to record event during that time or were they event markers in continuous recording?

Good video keep it up there is loads to do with version 4 have a look at the slider on the play back 1 day right hand side change it to like 5 mins less jerky more control

@HomeTechDIY

6 жыл бұрын

Thanks for the compliment and the advice!

Help! I was exactly snagged at the step that is after your add the 2 directly connected cameras - how to add cameras in the LAN, which have been detected as active but can't be got added...the channels are pre-occupied...

Can this fit in standard 1u rack mount

Hi,, is this the one can can handle 4K hdr

Thanks for putting out this content. How many 8mp h265 cams can you record and show in the multi view out for this unit? I wouldn’t need more then 8 at my house but I do want to run them all in full 4k with a high-ish fps. I’ve seen some “8 ch” nvrs choke out after 4 8mp cameras.

@1godgodgodgodgod

2 жыл бұрын

? i have 64 on a hik nvr and doesn't "choke"

@ 5.00 did you ever make a "platform access" settings video?

@fahrvergnuugen

3 жыл бұрын

LPT, if you care about security, do not use this feature. ever.

Aren't they don't need open ports at the router? it does automatically when you plug the NVR into the router? If I do need to open ports, do you have any video that shows how to open the ports?

I just purchased the hik vision system model number DS 77 16 n i 4/ 16 system can you tell me if they are outdoor cameras and if they have a app for viewing and if it is a NVR or DVR

@newfiebort I'm about to buy one of these 7600 16ch models, or the LTS model as I have a 16port 180watt total power POE unmanaged switch. What I would like to know is when we install these camera softwares, we have a option in the steup to give Private network access through firewall, or give Public network access. I would like to keep the software that I have noticed one (HDView) to access drives I never instructed to. I have also heard of a number of these having backdoor access and direct bandwith use with these apps. How can we safeguard against these apps to keep them off the content children and family or business info is transmitted on? Look forward to your next video. I purchased a few cameras, A Hikvision, a Dahua(same company, and the HDView. I also have a older IP/12v-dc powered indoor Foscam PTZ that should be interestingly weak(720p). Either way, The HDVIEW NVMS-1000 software I think has malware of some sort, as it taps my drives and network.

good video, but make a video in practice building, house, outdoor place. thinks, I need it to perform myself in computer science.

Does this NVR highlight when there has been motion in playback feature? When I use it I have to watch hours of playback trying to find an event because I can seem to see where has been motion. Also, is it possible to watch playback in 2x or 4x or 8x speed? It would be so good to be able to speed up playback but I can’t find either of these features when I use the DS-7600system on my mobile phone Thanks

Which system do you use for home surveillance that can do email alerts and zone isolation like Ring?

@HomeTechDIY

4 жыл бұрын

I like the Reolink Systems: amzn.to/30PvwaY BUT, if you want some quick and cheap, I'd recommend Wyze: amzn.to/3d60nmk

If I setup this NVR without a hardrive installed for live viewing only(no recorded video) will the beeping go away?

Have 1 ? Do I need wires to each camera's if I have nvr ? Cuz I know DVR u need wires to each camera's from 1 end to another... am thinking of buying hikvision 5mb how is it if u test it b4.

Can you help to tell me what 5 or 4mp or 8mp camera is compatible with Hikvision DS-7604NI-K1/4P NVR. Thanks

Interesting, looks like the NVR creates a sort of VLAN for the cameras to isolate them from the network

@fastmover45

6 жыл бұрын

Chargèro hikvision have really upped there game since the security scare

can u pls upload video hikvision ds-7616-ni-e2/16p

good video

Nice Video, can i use this nvr to open a gate? Can the green back interface doors be used to do that? Thanks!

@HomeTechDIY

3 жыл бұрын

Interesting question. There isn't a gate functionality on the NVR but you might be able to repurpose this interface for such a task. I haven't played too much with it, so I'm not sure how flexible it is or what kind of signal it sends.

What are management ports for?

Is there a way to remotely hide the NVR while still being able to view live footage on stand alone monitors in the kitchen and upstairs office? The HDMI cable is the limitation and I'd rather not have to place PCs in each location. House has network jacks in every room with two Cat6 cables to each. Great video, thanks.

@kevinramos7516

3 жыл бұрын

HDMI extension. HDMI converter through cat 6.

Hello and thank you for creating this video. I just installed the DS-7600 series Hikvision NVR with Dahua IP cameras for a client and they do not have any Internet service at the moment. If I am understanding your video correctly in order to get video images from each camera the NVR has to be connected to the Internet, right? Naturally, there's no way to add a new camera or assign an IP address to each camera without Internet service. So, am I understanding correctly that with this particular NVR there's no other way to get camera images? Does this NVR not have plug and play? Should the NVR display a video feed for each camera using PoE? Or is it that the Dahua IP cameras aren't onvif compatible?

@tohmeell3810

4 жыл бұрын

Hi, I'm having the same issue. did you know how to solve this or it doesn't support?

Hey Great video. Could you setup this with the same NVR but with a seperate POE switch? The setup I am going to get I need to be able to do this due to cabling issues within the house. Cheers

@HomeTechDIY

3 жыл бұрын

Yes, you can connect a PoE switch to a camera port on the NVR. You could also add LAN cameras to the NVR if you wanted to have full network and Internet access at your PoE switch.

Hi, how do you type without a keyboard on your video ? I know you can try on-screen with the mouse but that's too slow and clumsy. With only 1 x USB port, is there another option or a special keyboard mouse combo to use ?

I've got this nvr but the 8port one I can't get face detection active

Did you ever get around to reviewing the remote access and alarm capabilities? I keep kicking around the peanut of one day finding a COTS NVR that would suit my purposes but no luck. I would definitely connect the alarm features to series of zwave switches and make use of motion detection. Right now I'm building my own CV interface to toy with even better detection. Still would be nice to see how far away they are... oh, and I run headless. So remote access is a big deal. My NVR will be difficult to access intentionally. Thanks!

@HomeTechDIY

6 жыл бұрын

Not yet. I'm working on a few new camera videos right now and an illuminator video. Maybe once these are done.

@sionelltom5252

Жыл бұрын

@@HomeTechDIY Any Updates?

hola,tenemos un nvr hikvision7608ni-k2 y nunca funciono el audio,en la configuración de tipo de flujo me aparece solo video y sin embargo tiene palomeada en configuración de sistema grabar audio y salida de audio,si me podrias dar ayuda,y aclaro que la cámara no admite micrófono pero también es de la misma marca pero le pusimos micrófono que viene con fuente de alimentación y conectamos el cable rca a la entrada in nrv pero como te dije nunca funciono audio

Hey please advise, if this NVR can't is noisy ? Also what is the maximum number of 4mp cameras will be able to write simultaneously? Thanks

@HomeTechDIY

6 жыл бұрын

The fan is very quiet and the hard drive is even quieter.

can you add video doorbell?

How large of a UPS would you recommend using say 4-6 POe cameras?

@HomeTechDIY

5 жыл бұрын

Great question. I am in the process of composing a video on that....

in my office, when i click for live video the pop-up message shows "that live view failed" , remaining camera all are working fine. pls help me to resolve this

Can you connect 6 POE cameras to a 4 port POE Hikvision NVR, 4 directly to the NVR and 2 additional cameras to a POE switch? If so how? I keep getting the "no more IP camera allowed error" thanks

Hi , what a great video of you, i just bought a hikvision NVR model DS-7608Ni-SE/P with 4 channels and also bought 2 cameras model is DS-2CD2543G0-IS mini Camera and DS-2CD2143G0-I POE Outdoor 4MP H.265, i dont know why, whatever i do the 2 cameras never show up in the NVR, i plug correctly to the back of the NVR poe port and i can heard and see the light of the cameras is on but NVR cant detect the cameras, do you have any trick for thise NRV model or is there any special set up i need to do ? thanks

@HomeTechDIY

4 жыл бұрын

Maybe try resetting the cameras again back to factory default and then trying again. Also, make sure they show up in Hikvision's camera management tool: SADP. This video should help: kzread.info/dash/bejne/c4Klq7eSmpXfocY.html

@emilyxx5296

4 жыл бұрын

Home Tech DIY thanks for quick reply, all your videos is very helpful and thanks agaim

That was an awesome tutorial. Can you give an insight into how to connect 2 NVR and get the display on a screen

@iyzy_8236

2 жыл бұрын

Sounds cool

Great video. Quick question I have a old system installed in my office the problem I don't know the password and the old owner don't know as well my question can I just buy a new nvr system and plug it to the cameras and it will work or the cameras locked as well ?

@HomeTechDIY

2 жыл бұрын

Thanks! The camera are most likely password protected as well. Do you know the model numbers of the NVR and cameras. If there are factory resets on them, you can reset the devices and create new passwords.

@meirshay699

2 жыл бұрын

@@HomeTechDIY Thank you so much for getting back. The camera model is DS-2CD2122FWD-IS and the NVR model is DS-7716-NI

@HomeTechDIY

2 жыл бұрын

For the NVR and camera reset, this link should help. ca.hikvision.com/en/pwreset I would download SADP and click the forgot password link to generate an export file to send to Hikvision. It's not an easy process, but it should work. Let me know how it goes. I have never used it myself but tempted to give it a shot.

First timer here was this set up done without the internet ?? if not can i set up cameras with just nvr and monitor Thanks in Advance!

@HomeTechDIY

Жыл бұрын

I believe you can setup and use the NVR without internet. I'm not 100% sure since this was a few years ago.

Hi! Please answer my question. Can I use the same model of the camera to NVR without using POE Switch and Power adapter just direct to the NVR?

@HomeTechDIY

4 жыл бұрын

Yes, 99% of the time, yes... make sure the IP camera is a more recent model.

@erlpaulusrogalesofficial5197

4 жыл бұрын

@@HomeTechDIY Thank you for the reply sir. BTW, the RJ45 should be cabling to T568B?

I have looked at everthing I can and one thing is driving me crazy. H265+....what about H265 cameras with an H265+ NVR .or. H265+ camera with and H265 NVR....what is stored on the NVR? Does this just make the NVR store H265 compression or what?

Can you connect any brand IP camera? We are a school and a collection of various brand camera all recording to a computer using different software. Looking to centralise everything

@HomeTechDIY

4 жыл бұрын

Yes, as long as they support ONVIF. Here are 2 videos on your connection options: over LAN: kzread.info/dash/bejne/pIOjpdlmmb3Mfbg.html or using the NVR directly: kzread.info/dash/bejne/c4Klq7eSmpXfocY.html

Do you need power supply for for the cameras, or PoE sends the power from NVR

@HomeTechDIY

2 жыл бұрын

Cameras can get their their power from a power adapter, PoE switch or the NVR can supply power through it's dedicated channel power. My video on all the wiring options should answer this question is detail: kzread.info/dash/bejne/fZqTmtJpj6u8kdo.html

if the hikvision camera has a sd card can i just plug it into a lab top to control it without registering and all this crap .

The Nvr adjustments seems to be very limited compared to logging directly into camera. If camera is connected to the nvr, is there a way of logging into the camera to take advantage of them settings or does using a nvr mean you lose access to all them adjustments.

@ww-sd9pz

5 жыл бұрын

Turns out you can log into nvr on laptop and enable virtual settings that allow you to then log into each camera through your nvr. No taking cameras back down to make adjustments. Very handy.

@mickcarson8504

4 жыл бұрын

@@ww-sd9pz What brand is your NVR and cameras?

@ww-sd9pz

4 жыл бұрын

@@mickcarson8504 hikvision

@mickcarson8504

4 жыл бұрын

@@ww-sd9pz Ah..., the brand I now hate because it gives false alarms between sunset and sunrise. And its browser interface is rubbish, eyesore white in color and a pain in the butt. It shows colored boxes on the lower right, but in playback mode it doesn't show in the triggered points where the alarm or capture of motion should have occurred/marked, like the NVR own GUI screen, the one where you use the NVR mouse. And when there is a triggered alarm, I get a notification on my mobile. Guess what, after almost some 40 seconds later since the NVR had beeped, way too late. For example, I leave the house with the car and I am certain that the cameras have detected me, but the Hi-connect App on my mobile hasn't sent me an alarm notification at that spot. So, I drive to the supermarket and there it is, 40-50 seconds to a minute later I get the alarm notification, too late, WTF was it doing during all this idle time? Sometimes it sends alarm notifications immediately, sometime I'd be lucky to get one at all. And I am mostly around the house, in direct view of the cameras. And people are still saying Hikvision is the best. Ha! My fault, really 😣 I shouldn't have listened to anyone before I purchased it 3 weeks ago. So, now I am stuck with this Chinese junk that doesn't do what I had expected after trying other cheaper and better brands, Swann, Concord, Techview, etc.

@1godgodgodgodgod

2 жыл бұрын

newer hik nvr has those settings. other wise use ip in web browser on same network as camera

What UPS is recommended for that kind of system?

@HomeTechDIY

4 жыл бұрын

This should help you find the info you are looking for: kzread.info/dash/bejne/doVoytOHpt3PdrQ.html

Good video but it's hard to see how to add the camera if it has already been added ??

(Why) Are you changing from blueiris to hikvision nvr?

@HomeTechDIY

6 жыл бұрын

Expanding my knowledge and since I've hit 10 cameras on BI, I can only record at 1fps due to system lag. It's a $1500 computer and it cannot keep up, even with direct to disk. The BI database keeps having issues and since it runs on Windows, there are critical system updates which will reboot my system, so I need to keep a close eye on it to make sure I don't stop recording. I'm also hoping to save electricity in running an Hikivison NVR or a PC with a 800w power supply.

Hi sir hope your doing well!. this is Sayed Shah form afghanistan and I have HCSA certification and also i do teach CCTV i need to record configuration setup form my screen and need to know how do you can record form your screen with this quality? thanks !.

Can you use a Hikvision camera without an NVR? Getting PoE power from somewhere else and have it use a network HDD instead to store data?

@fetymann

6 жыл бұрын

Yes, download iVMS-4200 or pay for 5200

@mesaber86

6 жыл бұрын

Aha.. Thx!

I have just installed hikvision nvr and cameras, can u tell me is there a way that when the hard drive is full, that it starts to delete old recordings, or do u just have to delete the whole lot. Thanks

@HomeTechDIY

4 жыл бұрын

By default it's setup to loop and automatically delete old footage once the drive is full. I'm not sure if there is a setting for this off the top of my head.

I’m confused mate if you have a power outage how does the system keep running ? 🤔

@HomeTechDIY

2 жыл бұрын

Sorry for any confusion. If there is a power failure, I use a battery backup UPS. More details on that setup here: kzread.info/dash/bejne/doVoytOHpt3PdrQ.html

Hey buddy I noticed that the nvr has 16ch & only one audio in port? So does that mean you can only have 1 mic for 16 cameras?.I’ve seen other nvr/dvr have 4 to 6 ports for audio.

@HomeTechDIY

2 жыл бұрын

Good question and I'm not 100% certain. I think you can specify on the screen which cameras to speak through, but I'll add it to my list of things to investigate further.

How do you configure this to the mobile application?

@HomeTechDIY

5 жыл бұрын

You can use Hik Connect. I will be doing a video on it soon.

If you could help out on your knowledge about bullet ip Poe video night feed quality between 6pm and 8pm plus their distance coverage.be greatly appreciated.getting ready to buy upto 5 of this.and if anyone is selling them here in the U.S.A.tnx for your assistance.

@HomeTechDIY

4 жыл бұрын

Check out my Reolink videos and my bullet camera videos for answers to your questions. Sorry, not sure of any dealers in the US, but I do recommend Reolink. Here is a coupon code to save 8% on everything including sale items: ytbreo8offcanewfiebort

Hi, how do I know my camera models via the NVR or web interface. the cameras are already installed?

@HomeTechDIY

3 жыл бұрын

Do you know the brand? There should be some indication of model in the NVR's device page or if you are logged into the cameras, on their properties page.

What kind of cable access the nvm to laptop

@HomeTechDIY

5 жыл бұрын

No cable is required. You can access the NVR over your network.

I have a NVR same model, mouse is not working means mouse light blinking, also i touch menu option in nvr it's also not working. what is the problem, thereis any solution? Thanks in Advance

Unfortunately, there are different versions of ONVIF and merely because both devices are labeled as "ONVIF" is not a 100% guarantee they will work together, especially if from different base manufacturers. OR One may see some feature(s) work fine (e.g. video is displayed), while other feature(s) may not work properly (e.g. Pan & Tilt, 2-way audio, alarm features, etc) One may also run into compression codec incompatibility issues. One may also have a camera that requires bandwidth that is too high for a particular NVR/DVR (e.g. one may have an NVR capable of handling only up to 8x 3MP cameras but the camera(s) one is trying to add may be 5MP or higher, AND...the NVR may be able to only handle a certain value of combined bandwidth consumed by all the cameras connected. Under such constraints trying to add more cameras OR even a single higher resolution camera may cause issues. If one is unaware of these constraints then debugging problems can get complicated.

@HomeTechDIY

3 жыл бұрын

Awesome comment! Thanks for digging into this further.

Good day I am seeking assistance with setting up a POE NVR. I have activated the Hikvision IP cameras but when I plug them in to the NVR it is not being detected. I have tried setting the cameras IP to DHCP as well as setting static IP to the NVR POE ports but they still are not being detected. What other settings am I overlooking?

@HomeTechDIY

2 жыл бұрын

Once the cameras are manually activated, you would need to configure each of the NVR channels with the correct IP and credentials for each camera. The NVR's internal network (PoE) is on a totally different subnet then you home network. The easiest solution is to reset the cameras back to factory settings (inactive) and connect them to the NVR. The NVR will then activate each by assigning each a password. The NVR will also manage the IP address on its internal network. Hope this helps.

How do I delete an IP Camera from the IP camera Management menu? I have many unused channels on my NVR and I can't Add any more IP cameras because NVR says I have no more room (channels) available to add more cameras. I have reinitialized , rebooted, changed out HDD on NVR and the cameras are still there. Any help will be appreciated.

Can anyone tell me why I should buy an NVR by HikVision? what are the benefits? pros and Cons? how would I view the cameras on an iphone or Mac? Does Hikvision offer good quality recording?

@fastmover45

6 жыл бұрын

MV_FIT because hikvision is the market leader . 4k cameras . And they are very good

@MVFIT

6 жыл бұрын

fastmover45 not the response I was looking for but thanks.

@vision8579

6 жыл бұрын

You can access your NVR via web, on your phone and desktop using their stand alone software (much better than web). Hikvision offers x265 encoding which is the latest and greatest and can really keep the amount of disk space required down. Personally I find the NVR quite complex as it has so many features, but easier than building a PC to use as your NVR. Another thing I like about NVR, it provides PoE to the cameras so no special switch.... oh, also there is no direct access to the cameras over the network so I think that provides some increased security as well.

@sarahprice5260

5 жыл бұрын

forgive my ignorance,how do i connect to the dvr so i can see cameras remotely from my phone?

He there good videos. I recently bought a hikvision 4 port nvr.. model nvr 104-A/4P. I have an issue that you might be able to shine some light on. One of the ports at rear of nvr (3) will not show any camera footage.It says NO LINK. the other 3 are fine. What ever camera I plug into this port it will not work. Is this a fixable problem or if not, I can return as its still under warranty.

@out_on_bail

5 жыл бұрын

Sorcha F fault port

Excuse me for dumb question, do you have too have laptop too set up the camera system, or can it be do through the app. Thanks

@HomeTechDIY

4 жыл бұрын

Good question actually. You don't need either the app or a laptop to set up the NVR system. But.... if you need some of the camera's advanced features, you will need to connect a laptop to a camera port on the NVR and access the camera's web user interface. Hope this helps.

@stephenlivesey1

4 жыл бұрын

@@HomeTechDIY thanks, last question is there a height best to mount cameras

@HomeTechDIY

4 жыл бұрын

I usually do 8-10 feet high. Check out my planning video for more placement details: kzread.info/dash/bejne/aqyj2Kunfcqtp6Q.html

hello sir how far this NVR poe can transmit ?

@HomeTechDIY

4 жыл бұрын

The recommended length is 100m but I was able to do more than double that in my testing.

Pls help. i bought 32 channel Hikvision NVR and connected 15 cameras which was showing on both the monitor and Hikconnect APP but the three more cameras i added via POE switch to the NVR are not displaying. Pls help

@HomeTechDIY

2 жыл бұрын

My video here should help: kzread.info/dash/bejne/pIOjpdlmmb3Mfbg.html

One of our cctv camera showing NO LINK in cctv screen, does it means it is not recording video at all or it is just not displaying in screen, brand is Hkvision n with 20 or 25 days video backup.

@HomeTechDIY

5 жыл бұрын

When you see, NO LINK, you are not recording at all. Look at the Camera's IP address setting. It might show an error message. Check out my videos where I add cameras to the NVR and discuss the IP address. It should help you debug the problem.

high-k vision

Can you only have 8 Cameras on an 8 Port Hikvision device ? Or can you plug 16 Cams into a POE switch and have one Ethernet plugged into the device ?

@HomeTechDIY

3 жыл бұрын

Correct, only 8 cameras allowed on an 8-port NVR, even if you can access more on your network.

@ryanhosiassohn7176

3 жыл бұрын

@@HomeTechDIY Thanks so much, I just dont get why you cant have 10 cams on a 8port NVR if your core switches have POE

@HomeTechDIY

3 жыл бұрын

I know right... it would be awesome if they allowed more cameras. Maybe it's a processing power issue and they cap it at 8.

This says almost nothing about adding cameras. It says cameras already have IP assigned. How?

@HomeTechDIY

4 жыл бұрын

With Hikvision cameras, the NVR will activate, give the cameras the activation password and assign cameras IP addresses all automatically when plugged into the device.

@HomeTechDIY

4 жыл бұрын

For more information on IP addresses and adding cameras, check out my other NVR videos: kzread.info/dash/bejne/c4Klq7eSmpXfocY.html and kzread.info/dash/bejne/pIOjpdlmmb3Mfbg.html

thanks for this interesting video.sir i i want to connect to may home automation.my nvr DS-7600 series but i cant read ip address of each camera.as you said i casn read only the nvr.do you have any tricks that i can read nvr ip add and at the same time i can read ip add of each of my camera?thanks

@smallvestred2800

5 жыл бұрын

Are you the software that needs to detect the camera's IP address?

I need firmwar for 7732ni-k4/16p

@HomeTechDIY

4 жыл бұрын

Have you checked the Hikvision site?

My pie dvr 16 channel not power on showing white display of

@HomeTechDIY

Жыл бұрын

Sorry, I'm not sure what you're asking

How can I send a 4K signal to a second 4K TV?

@HomeTechDIY

5 жыл бұрын

An HDMI splitter should do the trick: amzn.to/2tEsPHq

How can you have password, My nvr Use name is admit, I don’t know what is my password

@amiinkeyy

5 жыл бұрын

The password is also admin bro

Can somebody tell me how I can reset the IP address on one of these NVR boxes? I have completely messed things up and now I can't get any of my cameras to work.

@HomeTechDIY

3 жыл бұрын

Send me details to info@hometechdiy.com. Include what happened and screenshot of the Camera > IP Camera page and Network > TCP/IP page.

ireset my nvr . after reset camera not working. may i help me. 😥

@HomeTechDIY

2 жыл бұрын

When resetting the NVR, the camera's don't automatically reset. You'll need to use the same password in your NVR as you did previously and ensure the camera activation password is the same. If that doesn't work, you'll need to reset your cameras by connecting a PC to one of the camera ports on the NVR. You'll PC will need the SADP software to find the camera's IP address. Once found, you a browser on your PC to access the camera with the original password. The camera will then need to be factory reset.

Hi has anyone encountered ghosting on the top portion of the frame of an ip ptz camera when zoomed to a certain xtimes ?

@HomeTechDIY

4 жыл бұрын

Are you referring to a particular brand and model? Does it happen consistently or just with certain settings (day, night, frame rate, bit rate, etc)?

@Zoilojav

4 жыл бұрын

@@HomeTechDIY It is a Hikvision ip PTZ Speed Dome camera Model DS-2DE4425W-DE (B). Yes the ghosting is consistent with the zooming. I have not noted down the zoomed value, the distance of the camera and the subject is around 80 feet. The video in the frame, 2/3 from the bottom, is clear and in focus. It is only in the top 1/3 of the frame that ghosting appears. It is set to auto (day/night) indoor, frame rate is 30 fps, constant bit rate. I have requested support from the supplier but it takes quite a while before they respond.

@HomeTechDIY

4 жыл бұрын

Thanks for clarifying! That is surprising to have issues with such a high quality camera. Hopefully someone here or support can provide some feedback.

@Zoilojav

3 жыл бұрын

Hi, a Hikvision technician finally was able to go on-site to do some troubleshooting. Problem on ghosting of video was not solved through tweaking of the settings of the camera. However, the good news is that the problem was solved. A hardware problem exists. The bubble cover of the ptz camera was defective. The construction was defective. The upper 3rd portion of the cover was blurry. We were able to see this problem when we took out the cover and took a video. The ghosting was gone. We saw the problem when we closely examined the cover made of plastic. I am now awaiting for the replacement of the bubble cover and the problem case will be closed.

Hi I tried to connect ezviz c4. cs cv220 camera to hikivision 16 channel nvr.but i can't connect the camera with the nvr..if you have time please reply... Can you please give your mail id.

@HomeTechDIY

5 жыл бұрын

Sure, to get things rolling, please email me with the internal IP address of the cameras and the NVR (and its subnet). Alse let me know if this is a LAN camera or plugged directly into the NVR. Maybe include a screenshot of the channel setup page with the IP addresses populated and ONVIF selected. Thanks - info@newfiebort.com

I have a problem with one of the cameras where the screen gives me no video even though it is connected to the device

@HomeTechDIY

4 жыл бұрын

Check out my other NVR video where I trouble shoot such issues. Let me know if it helps. Thanks!

@mickcarson8504

4 жыл бұрын

You didn't say what recorder you have. Is it a DVR of NVR? is the camera same brand name or is it 3rd party camera? Does your recorder and or camera have ONVIF?

Can nvr work without internet?

@HomeTechDIY

6 жыл бұрын

Yes. Internet is not required.

@orionstrike8573

6 жыл бұрын

newfiebort thank you for info

My nvr cannot add my camera it keep saying no camera i allowed

@HomeTechDIY

4 жыл бұрын

Try editing a channel instead of adding.

Just purchased a DS-7608NI-I2/8P and man this thing is loud, fans are way to loud to be comfortable set-up in office space, disappointment:(

At 6:10 see on the right where it says 1 day? Click on the very left dot, problem solved. You're welcome. Although I'm sure you've figured that out by now.

@HomeTechDIY

6 жыл бұрын

I did not have it figured out. Thank you very much!!

@fetymann

6 жыл бұрын

I see now that fastmover45 told you about that 2 months ago. Maybe you didn't understand what he meant.

how can I know the ip address of my camera

@HomeTechDIY

3 жыл бұрын

IP addresses are covered in these videos: kzread.info/dash/bejne/pIOjpdlmmb3Mfbg.html and this one: kzread.info/dash/bejne/c4Klq7eSmpXfocY.html

@adoseofreality8301

3 жыл бұрын

Just google ...... what is my ip address. It’ll pop up.

How did you get the Firmware NVR 4.0 loaded on this NVR? According to the website its only for "pro series". I have this NVR. us.hikvision.com/en/blog/hikvision-north-america-launches-new-nvr-gui-40

@HomeTechDIY

4 жыл бұрын

4.0 is the firmware that was included when I bought the device.

Slow down

I have laptop ; how can I open hdmi ? I alway see google page, please help me

@HomeTechDIY

5 жыл бұрын

Are you trying to access the NVR through a web browser over your laptop?

I need help please what is the default password for this device? I tried admin and it didn't and I need to activate it to proceed to the next step

@HomeTechDIY

3 жыл бұрын

The default password is blank.

@Ginichimaru1010

3 жыл бұрын

@@HomeTechDIY tried that but it keeps saying it's incorrect. Thanks for the reply. Mine is a brand new ds7608ni q2/8p model

@HomeTechDIY

3 жыл бұрын

If you are activating the NVR, there is no password as the activation process forces you to create one. In my example, on the activation screen, I set one here 2:58

@Ginichimaru1010

3 жыл бұрын

Yeah I thought so. I'm starting to believe it was activated before shippped and I bought from ebay saying it was brand new. It looked new because it had a seal on the box and it's not looking like it was used but how is it possible that it's asking me for an admin password? Someone must of activated it. Once again thanks your help

@HomeTechDIY

3 жыл бұрын

Do you know which version of firmware is installed on the NVR? Mine has 4.0 which might have a different password setup process than yours.

2:55

don't plug and play cameras

@HomeTechDIY

2 жыл бұрын

Why is that? Are you referring to off-brands?

@1godgodgodgodgod

2 жыл бұрын

@@HomeTechDIY no. i mean when setting up cameras give them stat ips dont plug and play them to nvr.. with sb327 i gather most brands make u assign a new password at least

This did not show how to add cameras, it shows cameras already working. Useless.

@HomeTechDIY

4 жыл бұрын

Thanks for the comment!! Adding brand new Hikvision cameras to a Hikvision NVR is covered here and an automatic process when connecting the cameras. If you are looking for additional methods to add cameras of different brands, or troubleshooting, do check out these 2 videos (depending on your setup). Adding NVR cameras: kzread.info/dash/bejne/c4Klq7eSmpXfocY.html Adding network cameras: kzread.info/dash/bejne/pIOjpdlmmb3Mfbg.html You could also drop me a line on my blog if you need additional help. newfiebort.com - Thanks!!

Can you do a video on how to setup motion detection and push email notifications

@HomeTechDIY

6 жыл бұрын

Yes, I will add it to my list. Thanks!