Thanks, excellent video. It worked well after formatting the hard drive.

@bestsecuritydevices

5 ай бұрын

I'm glad I could help.

This video really helped me thanks, my hdd kept filling up too quick which stopped recording I done the self test and passed but the all evaluation failed so I done key area test it was all green so I done full detection and it’s stopped because the error count was too high so I am going to replace the hdd with the one you recommended hopefully that fixes the problem

@bestsecuritydevices

5 ай бұрын

I'm glad I could help.

Doesnt work😢Followed everything tutorial initialised hdd because error hdd abnormal..6 hours later started beeping again error hdd abnormal 😮 smart test ok,hdd test bad sectors all ok?..help?

Thanks video clear info👍👌

What to do if the status of my storage says Repairing and I tried formating it by clicking Init but the initializing only goes 01% and always rebooting automatically after that.

sir good day! my dvr is lagging. whats the solutions, is that better to buy new DVR? ) :

Hello sir. Greetings from Nepal. My hikvision nvr is not powering on after connecting hdd...but it works fine while disconnecting hdd. Could you please guide me?

maaf mas mau tanya, aku baru pertama pasang cctv, dan pake hilook, setelah dirakit, hddnya abnormal, itu kenapa ya, solusinya gimana? terima kasih sebelumnya

Thanks 😢

New modal aco sence hikvision dvr hdd ab normal solve video plz

i already change the wires for HDD to dvr.. and change the HDD perse.. but still lagging.. ^_^

Hi, I replaced what appeared to be a defective HDD with new one. The new HDD will not initialize , it will reach 20% and then status will return abnormal, tried rebooting DVR with and without new HDD still same issue. Any advice for this issue?

@bestsecuritydevices

6 ай бұрын

Are you using a surveillance hdd such as seagate or western digital?

@Nickmor83

6 ай бұрын

Seagate@@bestsecuritydevices

@Nickmor83

6 ай бұрын

Hi I am using Seagate

@Nickmor83

5 ай бұрын

Hi have had time to think of a solution?

@luistantaovdg

3 ай бұрын

O meu está do mesmo jeito . Coloquei um HD novo da Western Digital Purple e fica assim : anormal

The thing is that my HDD isn't even initializing, it stays at 20% and then the status changes to "abnormal" again.

@bestsecuritydevices

7 ай бұрын

Perhaps the hard drive is defective, have you tested a new one?

@Kenabukanyo

7 ай бұрын

I can't try a new one because the one I talk about is at my workplace. We don't have any spares. Anyway, I tried and managed to update it to a new version, still hoping it's a glitch. It's not. I told my manager about it anyway. We'll replace it soon. @@bestsecuritydevices

@abdelrahmannasser4367

7 ай бұрын

Hello @kena I have the same problem, it does not increase more than 20% and then exit How did you solve this please advise me if i should buy a new one or it can be fixed? Thanks in advance

@Kenabukanyo

7 ай бұрын

The hard drive was changed. It was the only solution. @@abdelrahmannasser4367

@luistantaovdg

3 ай бұрын

​@@abdelrahmannasser4367 Estou como mesmo problema . HD novo

My hikvision doesnt have that smart settings and bad sector detection