What is your favorite finish polish?

@404notfound.....

2 жыл бұрын

Aca 520 👍

@jdisdetermined

2 жыл бұрын

@@404notfound..... Wait.. what?? You mean 520?

@Carlos.Rivera

2 жыл бұрын

Sonax Finale

@davidashley2719

2 жыл бұрын

LVR 403

@FaizanSubhani

2 жыл бұрын

Been loving the sonax perfect finish. The low dusting formula with all their polished is a big one for me. Less clean up after correction.

Switching from a Chemical Guys sample pack to Sonax Perfect finish was such an insanely huge leap. Happy to see it does very well here as well.

I have to say that this is the best detailing channel out there... Certainly some may disagree but Brian is so honest and straightforward when reviewing products. The demonstrations are top notch. I for one truly value his opinion... I've been detailing for approximately 25yrs and I always learn something new from Brian..

@apexdetail85

2 жыл бұрын

I appreciate that

@neillanders8292

2 жыл бұрын

Apex Detail is my sole source of detailing information. I was sick of the objective reviews on the forums and amazon... Watching his vids, I get a better idea of how products compare, what is hyperbole, and learn technique too. It's a great source of information.

Perfect Finish is my do-all. The initial cut, the finishing properties, the minimal dusting....I rarely find myself reaching for anything else except maybe a different pad depending on paint hardness.

@Alberto23848

Жыл бұрын

Great! 💯

I’ve gotten the best gloss results from Sonax PF by using a slower pass 3.5-4 speed initially and finishing with a higher pass 5.5-6 speed to take advantage of the two stages of that product. Amazing gloss with that approach.

I've used K.C. M302, and LVR 496. Both never disappointed. Fun video. Keep them coming

Thanks for the update, Brian. Your test results concur with a number of other detailers, who have chosen Sonax Perfect Finish as the best. I've used it on my cars and love the results. Keep up the great work.

Thx , Bryan !! Sonax perfect Finish, still great Polish, living up to its name as a perfect Polish , although they all will get great results, appreciate the vids 👏🏽👍🏾💯

I like the fact you measured after panel prep to show the level of filling some products perform

Excellent video as always Brian ✊

OH LET'S FRICKIN GO, been waiting for this. Bouta watch 🤪🤪🤪

You read my mind! Great video 😊.

I love the 3D products. 501 and 502 as well as the foam pads. I used it to polish up after I repainted the trunk. 🍻🍻🍻

Have not used any of these though no dogs in in this bunch. Turtle Wax Hybrid Solutions Ceramic Polish has been a favorite for me. Gr8 vid. Thx Brian.

Keep em coming B! Wish I could attend your training event!

Excelent video brian very helpfull thanks and hello from Mexico

Great video! I've used the Xtreme Solutions Finale and have been happy with it so far!

Awesome vid!! Love this kind😍😁

You asked about it during the vid so I figured I’d answer… Not all of use Facebook. If I were on there though, I’d definitely be part of the group. I always enjoy your vids and learning more !

Nice comparison Brian 👍😁

Wow big jump in gloss with just a small polish ! Thanks for that video Brian, I was hoping Xtreme Solution will be on top but I really like the Sonax products as well.

@lt.martincastillo5122

2 жыл бұрын

Deutsche Markenqualität IMMER Nr 1.

AAT for the win Porce wise and result cant go wrong with that 🙂🙂😘

Uuuuuuuuuuu yeahhhhh..been waiting for this

Cool video. I have SPF. Just bought AAT 502.

Very good and informative review mate. They are all very good. I have been wanting to try some Sonax now we can get it here in Australia. I would be interested to see Scholls S20 black, S30, Australian NV Finesse and CarPro Finisher as well. I really like to try Koch Chemi given the very impressive performance you have demonstrated using this German brand. One thing for sure is that German, US and British made products are top-notch.

I like Sonax for finishing , Angelwax Perfect finish and Carpro Essence of Essence Plus for jeweling.

Why aren’t you?!?! Love the peer pressure and aggressive nature! 😂🤘💪

urofiber 50/50 pad and 3D aca 520 is a match made in heaven... even for cars with substantial defects. Will cut and finish very nicely

@danlc95

8 ай бұрын

Right? I refer to ACA520 as "ONE lite"! 😂

Fun video to watch! All of the products produced impressive results. The final numbers were so close that none of them were really "losers." Most recently I have used 3D One. I haven't had the opportunity to use it on anything with more than mild marring to see how good it is with a correcting pad.

@AnteekeBro

2 жыл бұрын

What I use for most of my 1 stage corrections. It's fantastic at cutting while finishing down great. With an LC orange foam pad

You are a wealth of information 👌

A very good comprehensive shootout on some very top line polishes. Been waiting for something like this for a while. could you do a Compound shootout with the exact same brands or have you already have videos on these???? These vids save so much time for choosing the right polish/compounds and give great insight.

@apexdetail85

2 жыл бұрын

We have some compound videos....recent as well.

@ssing7113

Жыл бұрын

I’ll save you. Just look at esoteric. They derail multi million dollar cars everyday Jescar compound

I've been using the Mother's 3 in 1 CMX lately on a few late model vehicles with excellent results

He echado de menos en la comparativa otros productos como Scholl concepts S40 o Carpro Reflect, que serían los equivalentes. Me gusta mucho tanto el Kock, como el Carpro Essence. Y tengo pensado probar tanto el S40 como el Reflect. Un saludo y excelente comparativa.

thanks bryan, wish you could add uno pure on the list next time. regards

If you went over the panel a second time with the same polishes, would the gloss level improve further? I'm wondering if these are the best results each product can achieve, of if they can all reach the same level if you do enough passes?

Dear Brian: what do you think about 3M polishes? Thank you for your great job and help, kind regards from Mallorca, Spain.

See you in November! I'm so excited.

@apexdetail85

2 жыл бұрын

See you then!!

KC M302, Sonax Perfect Finish, and Nv Finesse are my favorites. If I had to pick one, Sonax Perfect finish because of no dusting and very easy wipe off. Great finish, too, obviously.

@yanniobkirk5744

2 жыл бұрын

So crazy the different user experiences with Perfect Finish. Dusts a lot for me. Look at any KZread video from Esoteric where they are polishing cars and their cars are covered in dust. They primarily use and promote Perfect Finish.

Great video just bought some 3D from the clean garage. Just curious what you washed your pads with they were spotless

Big fan of the aca 520

Great Video Personally I prefer Optimum Hyper Polish Menzerna 3800

been awhile 4 videos like this.great change of pace good friend. B well.is that a rupes yellow pad,

great video brian. i use both the sonax and koch chem, have you used the igl f3 finishing polish and if so how do they compare tho the sonax and KC polishes.

Nice

Hope to see you in November Brian.

@apexdetail85

2 жыл бұрын

I look forward to it.

As a shade tree detailer, what happens if all you have is a soft finishing pad to apply compound. will it still work? or what if you use a polishing pad to apply wax, would you get a slight paint correction while applying the wax. thank you

Shouldve held a light to each section and see which ones did better with the marks too! Glad I have PF already in the arsenal

For a soft clear ( Honda) with very light swirls mostly from towel drying even ektn a drying aid, would an orange or white lake country pad and Perfect Finish be enough to remove the swirls? I'm trying to go the least aggressive route possible.

I've used them all but the Xtreme Solutions. When ACA520 runs out I probaby won't replace it. I sold the Koch and Sonax. Koch was too close to my old Menzerna SF4000, and Jescar Micro Polish. Perfect Finish dusted and clogged pads. The AAT502 and Optimum Hyper Polish, and Meguiar's Ultimate Polish are still here.

Yeah the thin soft clear coats is why I’m here. I’m trying to find the finest mildest yet consistently effective product out there. I polished it once 3.5 years ago before applying a ceramic coating. I’m almost due to recoat the ceramic/graphene. I’m looking for a very fine polish to remove minimal imperfections with removing as little clear coat as possible. Really no scratches or swirls that I can see, just want to give it a once over. Appreciate any suggestions.

Can any of these be used to remove an old ceramic coating with very light marring?

so for mobil detailing would you say KOCHCHEMIE would be the best one? since it has a longer working time?

Great Video I have a question maybe is dumb but I am just starting a company of detailing so my question is polish and finish polish are the same or it’s any different?

My go to for "ultra finishing" is AAT502. I've had great success finishing out with ONE, and ACA520 as well, but 502 is excellent on the softest paint without any issues that I've come across. Honorable mentions go to: Meguiar's Ultimate Polish Jescar Micro Polish Optimum Hyper Compound If I had to choose one, AAT502.

@orthodox1717

7 ай бұрын

Thanks for the feedback. Do you like anything else better than 3D ONE for a 1-step polish? Generally speaking.

@danlc95

Ай бұрын

​@orthodox1717 - Not necessarily "better" but Menzerna 2500, and Jescar Medium Polish are both very strong candidates. Jescar can cut more, but the Menzerna finishes on a very wide variety of paints. I've never had the Menzerna not finish out. Meguiar's M205, M210, and Ultimate Polishes are also very strong competitors. These are different from the Menzerna and Jescar in that the abrasives do not break down, which means they can continue cutting indefinitely. Like the Menzerna 2500, the Meguiar's Ultimate Polish finishes out consistently. I've never had it not finish out. The difference is tha6 these are dedicated finishing polishes, and they SHOULD finish out! What I like about 3D ONE, I also like about Optimum Hyper Polish, and that is they don't stain trim. Hyper Polish also delivers a stunning finish.

I like Adams finishing polish

@danlc95

Жыл бұрын

That one is really nice!

Great vid Brian! You mentioned that you were removing the fillers with the panel prep. The fillers added gloss. In previous videos, you’ve always used a panel prep to remove the oils, fillers etc before protecting (sealant, coating etc). In what instance would you NOT remove the fillers? I miss you including the shop manager lol.

@apexdetail85

2 жыл бұрын

I would leave the fillers on troubled clear too thin and aged to chase after all of the imperfections.

How much of a difference did that 4th drop of Sonax on the pad make compared to the 3 drops of all the other polishes ?

Excellent work what’s the best wax you can buy out there in the us ?

Good afternoon Sir, I hope you are well. I bought a new Bronco in Oxford White. I’m looking at applying a ceramic coating. What do you recommend to coat the exterior paint, the hard plastic roof, the plastic cowling? Adam’s? Gyeon Pure or Mohs? Beadlock Pro? Kamikaze ISM 3.0? Any other brands? Thank you, sir. Respectfully, Robert

I have a question? I just bought the new Toyota Tundra with the color cement gray and this weekend I want to polish and coated. I bought your metal oxide coating and the toper rehydra sheet. My question was for the polish with my dual action, I have Sonax perfect finish are I wanted to try extreme solution lvr 403 will it works with your coating if yes how long should I wait after the polish to doo the coating?

Top notch vid Brian! 🥇🏆👍 *Question:* Any chance to post a link to your Glossmeter?

@apexdetail85

2 жыл бұрын

www.amazon.com/s?k=gloss+meter&i=automotive&camp=1789&creative=9325&linkCode=ur2&linkId=c24a11db9e7a0e2d0a6bd2dcfec0cb28&tag=apexdetail-20

Thx Brian , no AW Perfect Polish?

What about super thin Mazda paint that has only 2.8- 3.0 mils from the factory ? Can the products in the video be used?

Hi brian when your metal oxide will be back on stock?

Sonax Perfect finish.

I dig the 3D AAT 505 which I know is technically called a correction glaze.

@danlc95

2 жыл бұрын

Good stuff. It has wax in it too.

@orthodox1717

2 жыл бұрын

I like it a lot, but it sure clogs pads quickly.

The compound and polish videos may be my favorite. I have been enjoying Koch Chemie and Uno. I am curious how M210 would compare too.

@nicorallysport

2 жыл бұрын

M210 👍👍👍👍👍👍 for me!

@danlc95

2 жыл бұрын

M210 is really nice.

Angelwax perfect polish

Can anyone advise me which polish is best for detailing a brand new car. I have ordered Iron X and Gyeon Can Coat just need a polish. Thanks

Another one I like for a very fine finish polish is Meguires Ultimate Polish. Im noy big on Meguires standard compounds and polishes but the Ultimate Polish I have found gives some of the best finishing results I have ever gotten especially with Black, or dark midnight blue metallic painted vehicles. Worth trying though I will try Sonax Perfect finish because I am a fan of Sonax products

@danlc95

8 ай бұрын

It's been a favorite for over ten years now! I always have the Ultimate line on the shelf.

Why not Gyeon Primer? awesome product

Been using a lot of 3D compounds and foam cannon wash now for awhile. Not to crazy about their pads as durability is not that great with them. But there 500 and 510 cutting compound and 502 and 520 polished have given me excellent results with chemical guys hexlogic pads. Chemical guys sure make some great long lasting pads for not being to great at making compound through my experience

@danlc95

Жыл бұрын

That's probably because they're manufactured by Buff and Shine. At least the non Quantam pads. I love the green to cut, blue to polish, and red to finish.

@user-un5my5bw4j

Жыл бұрын

@@danlc95 I have tried a lot of pads and durability is the biggest issue. Believe it or not I have had the best results with chemical guys hexlogic pads as well as shine mate diamond pads not only do they last awhile but there heavy and medium pads cut great and for polish I use a light cutting that polish great. in both brands

Have you tested the Glare shiner product?

Great comparo vid, Brian! Thank you. Can i ask what make/model/year your test panel was?

@apexdetail85

2 жыл бұрын

The only thing realy important is the medium clear sprayed on it.

@paulanderson4764

2 жыл бұрын

@@apexdetail85 very true.

I use and prefer KCx abrasives

2 thumbs up from an old painter

Very nice, I still prefer the M302 over Perfect Finish but in recent times I’ve had to go to Perfect Finish strangely when M302 had too much bite on some Uber soft paint but it might have been my pad or technique. Either way good video.

@seabrew1

2 жыл бұрын

What do you like more with micro cut?

@AmirAbdullah

2 жыл бұрын

@@seabrew1 finishing properties.

@sometimesvincegilligansome5802

2 жыл бұрын

@@seabrew1 I think he likes the finishing properties lol

@orthodox1717

2 жыл бұрын

@@sometimesvincegilligansome5802 😂

@orthodox1717

2 жыл бұрын

@@AmirAbdullah Uber soft BLACK paint?

Brian, why not include pricing to help determine which is the best value?

@DRTYFN

2 жыл бұрын

Because you can look it up. Brian does the heavy lifting.

Brian, could you provide an in-depth analysis on the use of fillers thought the industry? I really don't know anything specific about them. What is the truth?

@apexdetail85

2 жыл бұрын

I will cover them in a future video in great detail.

@bige8397

2 жыл бұрын

@@apexdetail85 Awesome!!!

Excellent video.Brian. These products are all excellent. My curiosity is peaked.....can someone really tell the difference between 0.1.- 0.5 gloss units? Also, is it fair to say, an average customer regardless the type of vehicle they own will be able to tell the difference of 1.0-2.0 gloss units? Again, these are all tremendous finishing polishes. I really appreciated this comparison.

@yanniobkirk5744

2 жыл бұрын

Humans cannot perceive less than 2 gloss units of difference.

@seabrew1

2 жыл бұрын

Apparently you need around 5 units to see the difference. That's what I read anyhow. So all these polishes will look the same. Comes down to user experience IMO.

@yanniobkirk5744

2 жыл бұрын

There is also difference in 20* vs 60* measurements. Once you get into the 90s (or perhaps even lower) on 60* measurements you should switch 20* when measuring glossy surfaces.

Hi thank you for the video, very informative! Do you use Meguiar’s M205/M210 ? Compared to perfect finish.

@apexdetail85

2 жыл бұрын

Not a fan of Megs polishes or compounds...but They may work in other environments.

@nicorallysport

2 жыл бұрын

Meguiar's M210 is really great !. Superb finish, good correction for a polish and no dust and wipes very easily !. M205 too, M205 has a little more cut than M210, but the finish of M210 😍

@calebkasten4209

2 жыл бұрын

@@nicorallysport Thank you! M210 is definitely something I need to try out.

@calebkasten4209

2 жыл бұрын

@@apexdetail85 thank you!

@nicorallysport

2 жыл бұрын

@@calebkasten4209 Oh yes it is amazing! 👍

Can the M3-02 be used on gel-coat?

What towell is that you are using?

Carpro reflect still better i guess. Not forget to mention, rupes uno protect also best in finish, buttersmooth and easy to wipe.

Sonax Perfect Finish

The industry hasn’t even tested their Final 1-6, it’s their AIO.

What do I use after Sonax PF? Wax or?

Sonax Perfect Finish and Menzerna 3800

Which pad to use for sonax pf?

Esoteric found this out years ago Thanks for the video none the less. Sometimes the allure of many things only leads people on a chase. Notice how esoteric only uses a few products on multi million dollar cars. They already found what works and it’s boring

Not a finish polish question.... Actually a topper question. You've raved over Extreme Solutions Topper and also over Waxedshine Aquabead. Any thoughts on which when used as a topper would give better gloss, and which would give better protection longevity? I'm still using some old school products such as PNS , FK1000P , and lately Griot's Ceramic 3 in 1, but want a topper that will give additional gloss.

@snail415

Жыл бұрын

One of the best ‘topper’ products I’ve found is so easy to find. You just won’t believe it’s readily available. Meguiars hybrid ceramic wax. No joke, don’t regard it like some primary form of protection, but as a topper. Apply it after every few washes, assuming your paint is still clean. On a ceramic coated car, it absolutely amplifies the finish. It darkens dark paint and adds a lot of reflection within seconds. It’s super cheap, doesn’t leave a chalky residue, and doesn’t have to be instantly wiped-off. I’m not a fanboy. I just tried it and began looking at the product differently. And if that approach doesn’t suit you, just up your application rate on that 3-in-1. I do that on other vehicles too, and it’s a great spray to have handy. Some of the products marketed as annual-protection are really just badass toppers. Cheers.

@sirliftsalot1154

Жыл бұрын

I'm late to the party but Topper should be named Depth in a bottle. The slickness doesn't last long but the depth and gloss remains for a while. Titan is also very good. I'm experimenting with Cerakote rapid ceramic spray as a topper on the hood. It's the most hydrophobic spray I've used under $50 and it cost $16 at Walmart. It wiped on and off effortlessly even in the sun on a hot panel. 3 coats is the trick.

How do you determine a finishing polish vs a one-step polish ? I understand a finishing polish (reviewed in this video) are used in a 2 step process - then why is a cutting&polishing compound like SONAX PF used as it is a disintegrating polish where it compounds/cuts first, then finishes as a polish?

@snail415

2 жыл бұрын

My simple answer is to look at the grit level equivalent that the product says it can resolve up-to or down-to. One-steps vs AIOs differ to me in that the latter offers some protection, whereas the former tackles a range of paint issues. Products like 3D One can confuse some; it isn’t ‘automatically’ a one-step because it is pad-dependent. You determine the number of steps based upon the condition of the panel involved. If you’re looking at a polish that breaks-down as it’s used…and also has some built-in protection, it’s marketed as an AIO. I prefer if possible to really divide products by purpose so that your workflow is consistent and the product is maximized to a narrow purpose. Xtreme Solutions Knockout can blow-away 1,000-grit scratches without issue…but you better believe I’ll finish the task with a dedicated polish.

@judeperez7897

2 жыл бұрын

@@snail415 right now, I have no AIO in my arsenal as I’m taking the time to provide 1-step (3D One) or 2-step corrections (Griots Fast Correcting Cream + Sonax PF) to friends and family to dedicate the hours toward improvement in this specific craft. What started out as a hobby/enthusiast thing that I do for myself is slowly transitioning into something I could do as a side job! The passion is there. Thank you for your detailed response Justin. Consistent work-flow should be my focus when looking at these products, and I should definitely be organizing them to be purpose based for client scenarios.

@danlc95

Жыл бұрын

The Sonax PF isn't that great of a cutter, which is why most people use it as a finishing polish. I believe it also contains some non diminishing abrasives too. For me, a finishing polish with a stronger pad, or a medium polish on a polishing pad can fall into the "one step" category. Anything with protection, I've gone back to calling them a "cleaner wax". 3D Speed, Meguiar's 3 in 1, Uno Protect, etc. There is too much confusion around the term "one step" between a polish and something with protection. But for your first question: I'll use Rupes Keramik Fine polish as an example. Back when I was using their line heavily I used Keramik on their original yellow microfiber pads in a "one step" situation. The pads provided a boost in cut, but also finished really well. I could have all used that for a cutting step on softer paints, and finish with the same polish - Keramik, on Rupes yellow foam to finish. However they also had their Quarz Medium that worked great on the green pads they were intended to be paired with, but Quarz also worked great with the yellow foam for even better finishing. These days I use 3D ONE for almost everything. It cuts great with Uro-Fiber pads. I'll do one steps with it on yellow Buff and Shine or orange HDO pads, but I can also finish with it on those same foam pads but with less passes, and higher arm speed. It's definitely my most versatile polish. In the instances I need more cut I switch to 3D ACA500 on the Uro-Fiber. I also keep AAT502 around for super finishing, but rarely ever need it.

I dont need to see the results. Perfect finnish is so good i wont be needing anything else

If you can’t afford cosmic spritz or high gloss what would you suggest to maintain cosmic v2?

@apexdetail85

2 жыл бұрын

High gloss.

Brian, could you please suggest which foam pad to use with Sonax Perfect Finish on cars that have softer clear coat than Toyota. How many passes should i do in 2 x2 section ?

@icebmwpower

2 жыл бұрын

Black foam pad should work perfect for you. Two passes and repeat if needed.

@apexdetail85

2 жыл бұрын

An application or mild polish/finish pad would do.

I need some more time with Perfect Finish but of the times I have used it it has dusted a lot. What am I doing wrong?

@yanniobkirk5744

Жыл бұрын

Perfect Finish dusts. It’s a very old formula designed for rotary use and all the old formulas were this way.

@danlc95

Жыл бұрын

I had the same experience. Great shine, but not worth the dust. It also clogs up the pads.

Now what do we add to get into the triple digits

@danlc95

2 жыл бұрын

I remember Jon from Forensic Detailing got into triple digits with Meguiar's M205.

If I wasn't for than glossmeter.can u really tell the difference with the naked eye I can see any difference

@joeschmoe6908

2 жыл бұрын

no

3M, Malco, Presta, Surface, Maguire try this

Koch Chemie M302