Hi Capa Breakdown & Rebuild Advanced Frame | Airsoft 2022 | Airsoft Masterpiece
Ойын-сауық
Hey everyone! My last breakdown vid done pretty well so I thought some of you would like to know how to do an advanced frame! You want to take your build to the next level? Then watch this vid and go get you that advanced frame!
#blowbackmasters
#airsoft
#hi capa
#airsoft masterpiece
#DIY
#lazerbeams
#fullsend
Пікірлер: 77
Man. When I was installing my frame. Something was wrong and my hammer was stuck. Then I found your video and just went step by step. Everything is fine now. Thank you lol
@HOUDINIIAirsoft
Жыл бұрын
Fantastic!!! I'm so happy this vid was able to help you out! I know it's a bit lengthy but I really wanted everyone to be able to follow along. Thanks for the comment!!!
just finished a 5.1 build and i truly appreciate this guide. thank you man!!
@HOUDINIIAirsoft
2 ай бұрын
Absolutely!!! I’m just happy it helped 💪
I did this in the bathtub, with the drain closed obviously. I ALMOST caught the spring with the curtain, but then I heard it go over and hit the ceiling and needless to say, the spring has evaporated.
@HOUDINIIAirsoft
Жыл бұрын
😂! I have to have at least 30 of them somewhere in a magical land of elusive springs 😂! Once u get the hang of it you’ll lose less of them. Blowback Masters has replaceable springs for cheap. Use code HSAFIVE to get them even cheaper 🤘! Also, thank u so much for watching and commenting 🫶! Helps a ton!!!
Amazing! Thank you 🙏 The small spring with the valve knocker was driving me mad. Frame installed!
@HOUDINIIAirsoft
Жыл бұрын
My pleasure! Yes 😂! That is the trickiest part of the whole thing. Glad I could help 🤘!
great video man, good breakdown.
I am going to watch it when i get home bud but can wait to see it
This is helpful for a new airsoft builder like my self
@HOUDINIIAirsoft
Жыл бұрын
That’s what I like to hear!!! I’m really hoping to help out where I can. I build for others and for Blowback Masters. If you’re interested checkout Blowback Masters on the internet and use code HSAFIVE on your parts. You’ll save some money.
The best to ever do it
Well done
Nice dude keep it up
Nice build!
Just a side note there is no need to remove mag catch doing this job just making extra work for yourself. You only need to remove mag catch when changing grip or you want to get the trigger out.
@HOUDINIIAirsoft
Жыл бұрын
Correct. Still good for ppl to know how to remove everything. Let’s say I didn’t show it and someone watches this and they need to remove the mag catch. Now they know how. Got to appeal to all ppl and all tech skills/knowledge.
Thanks used this to learn how to replace my thumb safety, cuz mine broke, but I still haven’t bought one yet as they are all out of stock.
@Inkesomnia
Жыл бұрын
Sadly they’re out of stock everywhere
very beautiful build bro ! congrats!
@HOUDINIIAirsoft
10 ай бұрын
Thank you 🙏. This is a build I’d did for a friend. I have a few of my own as well.
@Overlord0995
10 ай бұрын
oww wow bro amazing!@@HOUDINIIAirsoft
I like the CowCow hop units. Hop wheel will screw down. I like guide rod pin, and the screws to keep the hop unit tight.
@HOUDINIIAirsoft
Жыл бұрын
I can agree on some stuff CowCow. They definitely make some of the higher end products.
@pauls.5815
Жыл бұрын
@@HOUDINIIAirsoft Will the EDGE short Stroke nozzle work with other BBUs other than the EDGE? Do you know?
@HOUDINIIAirsoft
Жыл бұрын
@@pauls.5815 Absolutely! So the CowCow B01 works great with the edge nozzle, standard or the short stroke one. I do suggest getting the AIP o-ring kit for bbu’s. You can find them on Blowback Masters. Use code HSAFIVE to save some 💰. You get this and you should be able to swap out the o-ring on your bbu to better fit the nozzle for better air compression.
@pauls.5815
Жыл бұрын
@@HOUDINIIAirsoft Thanks for the info. I have $1000s into Hi Capas and still don't know everything. I'm more in the AEG world. I am getting set up to do KG GunKote now. KG is the GOAT when it comes to paint. It goes on really thin 0.0003" thin. Plan to do Hi Capas and AEGs or whatever really. Ill share my results when I get done.
@HOUDINIIAirsoft
Жыл бұрын
@@pauls.5815 that sounds fantastic! Custom work is booming in this sport! Same here bro! I have a crap load of time and money into Capa’s so if I can help feel free to hit me up! My Instagram is HSA.Houdinii.10
11:03
I installed this frame into my hi capa with a void barrel and a EMG / STI International DVC 2011 / Hi-CAPA Pistol Grip, I even went to 2 places for them to fix and couldn’t figure it out. The main problem is that the trident sear spring would not reach the sear to lay on top of. If anyone might know why please let me know. Thanks.
@HOUDINIIAirsoft
2 ай бұрын
odds are the grip is not fully compatible. It may fit and the grip screws go in but if the cut in the back of the grip where the sear spring slides in could be cut lower thus not allowing a full seat of the sear spring on the sear. I would try a stock TM grip and see if that fixes your problem. If it does resolve the issue then you know the current grip you're using is the issue. Please get back to me and let me know if this works or has already been tried.
38:39 got to use my gut its the one and only tool for building
@HOUDINIIAirsoft
Жыл бұрын
😂! Definitely comes in handy and I always have it with me 😂! Thanks for watching and commenting it really helps out 🙏
Hello, excuse me, where do you buy those spare parts? I need one of the parts of the white container Greetings from Chile
@HOUDINIIAirsoft
4 ай бұрын
So pretty much wherever I can find them 😂! I do shop a lot at Blowbackmasters.com, Evike, Amped Airsoft, Rainbow 8, Airsoft Megastore, Red Fox Airsoft, and Airsoft Junkiez.
Airsoft masterpiece hammer? I just have the same frame and I ran into a problem that my hammer got stuck after a while of shooting Will a TM stock disconnector work with this frame?
@HOUDINIIAirsoft
Жыл бұрын
Yes the TM disconnector should work. Feel free to hit me up on my Instagram and we can probably iron out some issues and get that capa slinging. My IG is HSA.Houdinii.10
@HOUDINIIAirsoft
Жыл бұрын
Yes I tend to go all AM when building a fully custom capa like this.
Loved it.Very informative just one more thing that intro song is off Tap were can I get it from or can you send me a link thank you.
@HOUDINIIAirsoft
Жыл бұрын
🫶🫶🫶! It’s an HSA exclusively made song. HSA (Hit Squad Airsoft) is my team’s name.
@azzanoorbergen2136
Жыл бұрын
One more question if possible???Will a CowCow steel hammer fit and function in these Masterpiece frames
@HOUDINIIAirsoft
Жыл бұрын
@@azzanoorbergen2136 Yes. However, I have seen some work and some not. Because of that I typically go with Airsoft Masterpiece.
I’m a newbie. Do I need to buy a base TM 5.1 Hi capa in order to start customizing? Or can I buy all custom parts and build the entire gun? Thanks
@HOUDINIIAirsoft
8 ай бұрын
Great question! Yes! You can buy and build from the ground up.
i have an EMG SAI 2011 DS, which internally, is agonizingly close to a TM advance frame. it has a 'hammer & sear box' that is almost identical, but the asshole engineers decided to make the piece proprietary, and added the slide rails on to that box itself, rather than having them be continuous along the side of the frame. As a result, i might have to 3d model & cnc my own hammer & sear box to get my hicapa to work fully with aftermarket parts
@HOUDINIIAirsoft
Жыл бұрын
Oof! SAI is not a bad brand either. It’s surprisingly cheaper to just build a custom Capa from ground up the it is to get a stock Capa then upgrade.
I got a problem with my hamer when i connect it to my hpa and wanna play it will shoot 3/4 times no issues and then the hammer stuckd half way on the safety pin ish and i have to pull my hamer down with my thumb do u or anybody who reads this know how to fix this… its driving me nuts
@HOUDINIIAirsoft
6 ай бұрын
I’m having a little trouble with the explanation. So it shoots a few rounds and the hammer will half cock or the hammer will go forward but no pew pew?
@HOUDINIIAirsoft
6 ай бұрын
Also, if you want, so I can better assess the problem, hit me up on instagram and maybe send me a vid of what’s going on. That can help me help you 😊
I know video is old but I just finished a advanced frame build and gun will only cycle hammer half way back.I used LA capa internal.Do you think that would be my problem not using the airsoft master set?
@HOUDINIIAirsoft
4 ай бұрын
Though the video is old nothing has changed on how to build. My first thought would be because of having LA Capa parts in it. If you want look me up on instagram under CallsignHoudinii. Send me a vid and we can chat. See if we can get it fixed.
@jbunchboy4402
4 ай бұрын
I ordered the Airsoft Master kit so once I receive it I will install and reach out to you on Instagram and thanks for getting back to me.
@HOUDINIIAirsoft
4 ай бұрын
@@jbunchboy4402 absolutely!!! Here to help 😊
what was that song at the beginning?
@HOUDINIIAirsoft
5 ай бұрын
Custom made song.
Man, i guess its time to buy myself a hobby CNC machine so i can cnc some aluminium slides and frames ^^ it does irks me to no end that youre overplaying the loss of a little spring that we buy 30 at the time of >.
@HOUDINIIAirsoft
11 ай бұрын
Overplaying??? Number one, it is very easy to lose. Number 2, I only had a couple to spare. Finally, this video is more for people that don’t know how to assemble this frame so it’s a bit important they know the semi complexity because they more than likely don’t have any spare springs 😊.
do you have to use mineral lube for hi capas or can i use CLP gun lube to lube up my gun? any airsofters can reply
@HOUDINIIAirsoft
9 ай бұрын
Do not use CLP. It will cause your rubber orings to swell.
@HOUDINIIAirsoft
9 ай бұрын
Personally I use waldo customs thin and mid lube.
@nolanwilliams7832
9 ай бұрын
thanks.. do all mineral lubes work just as great at the waldo customs... im new to hi capas and so i want to be very careful on how i do things
@HOUDINIIAirsoft
9 ай бұрын
@@nolanwilliams7832 tbh I’m not 100 on other mineral lube. Should be safe with it but I’m not to sure.
@nolanwilliams7832
9 ай бұрын
@@HOUDINIIAirsoft ok.. well i appreciate the advise man!
Is a 5.1 slide a d 4.3 lower
@HOUDINIIAirsoft
Жыл бұрын
You can swap between 4.3 and 5.1. Each slide will work on each frame. A 4.3 slide will work on a 5.1 frame and vise versa.
I hope thatvis what are using on my build hahaha 😂😂😂😂😂😂
yoo Houdinii how u been bro
@HOUDINIIAirsoft
Жыл бұрын
Good my dude! Just busy. Getting some travel in and chillin with tha fam. How r u?
@Maddox548
Жыл бұрын
@@HOUDINIIAirsoft been good
songs name ?
@HOUDINIIAirsoft
9 ай бұрын
It was a custom song made for my old team.
@jesussanchez6136
9 ай бұрын
@@HOUDINIIAirsoft 🔥
Hey, i build from scratch custom glocks with all the bits and pieces and if possible as much of realsteel parts that i can fit. lights,rmr/sro,magextensions,comps ect... but what i secretly like about hi capas are the colors you can match and make this really a playable piece of art so to speak. i love my glocks but i have to admit that this video made think to get the parts and start a hi capa build...lol. i really dig this transformation you did and the outcome is lush..nice👑🤌🏾
@HOUDINIIAirsoft
9 ай бұрын
🙏🙏🙏! I have a few others I haven’t really shown too much. Biggest difference I have found between glock and Capa is trigger sensitivity and yes the customization. I hope you build one up and if so let me know how you like it.
@O.G.SPOOK1
9 ай бұрын
@@HOUDINIIAirsoft 🤝🏾