DIY Gun Paint Job Tutorial
A quick and easy to follow guide on creating your own custom paint job on your airsoft guns.
This tutorial shows you how you can create a paint job of your choice with supplies found at your local hardware store.
A quick and easy to follow guide on creating your own custom paint job on your airsoft guns.
This tutorial shows you how you can create a paint job of your choice with supplies found at your local hardware store.
Пікірлер: 199
I've seen dozens of these videos and this is by far the best one and easiest direction.
@HvacGuy76
Жыл бұрын
Agreed and the workmanship is amazing.
@millerleathergoods7623
11 ай бұрын
I agree
Well done! Using electrical tape as a stencil is a great tip. I've got an AR I'm thinking about painting and you've given me some ideas. Thank you!
I can honestly say. I use to paint automobiles prior to my injury. It looks so much easier to prep and paint a gun. Very nice job sir. I’m sure that took a lot of patience. Very nice indeed. Thank you for sharing.
@darylobey8867
2 жыл бұрын
Iv airbrushed car hoods and i know your pain in prepping lol working on guns is much more simple :)
Great work! Love the color choices and layering.
Best looking paint-job I’ve seen on KZread! Nice work bro!
I really appreciate the way you showed how to get some eye popping looks! Great job!
Beautiful! As a paintballer who plays Magfed, I tried doing a multicam arid type paint job on my TMC, however it didn't work out too well. So I thought about doing this, but with a base layer of FDE, putting tiger stripe stencils on it, and then going a dust of brown about it (I don't own an airgun unfortunately).
I have been looking at hundreds of paint your guns videos as I am considering painting one of mine, and I have to say that I like yours the best, TYVM, I just need to get an airbrush as that "effect" is awesome. Can't wait to try it. TYVM!
You killed this paint job man.
I have been debating doing this to my Scar 17 that is all black. This is the first video I have watched that has pushed me to just do it.
Awesome job, it looks great!
This looks absolutely phenomenal
I'll probably stick with a primarily green multicam, but this is the most unique and nice end result.
I did something similar with Vallejo paints since they are intended for military models. I got a nice Splitter pattern, which was a close match to the jacket I normally wear when I'm out in the bush.
the black on tan looks pretty good
This came out so good! Thanks for the tutorial!
Looks great! Can't wait to try this.
nice paint job plus feed why good camera angles too i feel lile you deserve more subs
I'm showing this to my wife and she's gonna help me out with this!! Nice video
You did a awesome job on that rifle... that airbrush did the trick
Reptile camo looking great
Great work and video!
Cool technique, thanks for sharing!
It looks like the reptile camo from call of duty modern warfare (i like those camos)
@codealtf4logn779
3 жыл бұрын
Yeah it does haha
You did a awesome job
Doing it but with low tac masking tape from Amazon, you can rip the edges to get a better edge
It looks really good
you have done a perfect paint job so i liked the video, i will sub!
Beautiful , very very good work 😉👍✊
Easiest tiger stripe diy ive seen nice vid
This was amazing thank you
Use painter’s tape instead of electrical tape, cut it with scissors. Less sticky, and easier to peel off
Try holding the can back farther next time. Much more even and efficient coverage
Came out bad ass!!!!
awesome job !
Looks great.
Job well done
i could use some tips about, how to make like a green gun, with the best camouflage, there still some hard lines on this gun, wich i like. But i like someting to blend in some bushes. like , any bushes
awesome, this really helps me out ! thank you
good job !!! very nice gun !!!!
Great Pattern!!!
Going to do this color scheme in green in the summer on my 303 british. Im doing winter camo right now
This is a very nice 👌 👍 job. Looks damn great 👍.
That looks so good, I don't have an airbrush and am thinking about spray painting on the tape to let the over spray create the same effect. Have you ever tried this?
@elmatador2481
4 жыл бұрын
did you try that technique ?
BEAUTIFUL
Do you have to take the rifle apart or cover anything before you spray it ?
Very cool effect.
Nice video but which colors did you use exactly?
I know this is an older video but man I sure love it! I’m going to give it a try on a couple matching ar’s I like your color choices can you tell me the names of the colors please. ? Thanks!
What kind of paint did you use in your airbrush? How is it been holding up?
This was the best camo tiger stripe 🦓 I've seen for awhile now but now you have some competition from the guy doing this with dish soap 🧼... Tiger stripes 😍 are pretty but u have to remember you want your rifle to disappear with you into the bush... The tiger stripes although pretty, stick out more to me than the dish 🧼 method...
Do I need to take out any screws, or cover up anything on the gun with masking tape, so it doesn’t ruin it?
Very impressive 👏👏
Which airbrush are you using in this video? I'm shopping them now, not sure how much I should spend.
Automotive clear enamel is the best I’ve used ..... 1-2 coats max no fade-away
@calebsshorts3595
3 жыл бұрын
Then it shines
@b-kerbchek-k7582
3 жыл бұрын
Caleb Lynthacum you can get no gloss finish, and I’ve noticed if you do a final coat of regular Matte finish it completely dulls the shine
@Petryfied
3 жыл бұрын
Yes any automotive/truck bed paint or grill paint are all rated for higher heats and are tough as nails. I use the black truck bed liner spray paint on old rifle barrels that’s won’t let you use super blue
How many colors did you use?great job
Great video top job
Please make some more vids wow this is great new sub here thanks.
Wow ! It's beautiful. What are the RAL codes of the paints you use? My guess its Ral codes 1013, 1014
Nice job, absolutely stealing the idea of using Electrical-Tape Vs. Painters-Tape. Did you sand or wash the blaster first to remove leftover anti-moulding agent?
Do you have ukara? Because I don’t I’m not 18 yet so I think I’ll make use of two tone blue and paint it like a union jack
Well done
i just want to say that it looks awesome, just from the first photo of the video. One observation, you kinda hold the spray to close to the gun in my opinion and that make the paind bleed and it can be seen in the result, but damn still looks good
I have an 80% aluminum receiver. Do you think the paint adheres well to the aluminum?
what color paint do you use...i know your first coat is base coat... what color paint is you base coat and what color are the rest?
This gun looks amazing I've already started mine what tape did u use thanks
@joeshmo8155
2 жыл бұрын
Electrical tape
What paint did you use for the dark coyote brown type color?
Outstanding Job and should go into business if you already haven't.
Very nice. I think they call this pattern "riptile"
Did you take out the anything but the mag?
What brand and colors did you use besides the black ?
Sick!!
What paint did you use with the airbrush?
Fucking. Sick. Nice watch/band as well. By your style choices you are obviously a gentleman.
How was the plastic prepped ? Sand paper?
Do gun metals require a coat of primer?
This is really handy to know, just curious if you'd have to sand it first or what
@darylobey8867
2 жыл бұрын
Nope do not sand or prime NOTHING just mask off and paint
Does the electrical tape work better then painters tape? Curious cause i had a few spots with the under layer paint lifting while peeling the tape.
@RadioSilence
3 жыл бұрын
Yes, electric tape keeps its shape and is easier to cut than painters tape in my opinion. If you find painters tape works better for you though then go for it! 🙂
Does the electric tape leave a sticky feel?
Can you make the same gun but with black stripes on a green background?
What brand and shade was the base color?
didnt mask off the mad well or dust cover...light lens?
Siiick!!!
Is disassembly of the gun required or any degreaser or sanding necessary?
@RadioSilence
5 жыл бұрын
Miguelito Not necessarily. While disassembling the weapon will definitely prevent any paint getting in to the moving parts, it’s equally as easy to just plug the holes or mask areas off. No sanding or anything required. Paint isn’t technically permanent and with a simple paint job like this it’s important to remember it will most definitely show signs of wear quite easily
What colors did you use?
Nobody: Call of Duty Gun Skins:
Hi, I’m thinking about painting my ak47. The problem is it’s a complicated paint job and it’s my first time. I’m not sure if you have heard of the game rainbow six siege but i want to paint my gun the black ice camo from that gun. Any tips on how to make it look nice and similar to the game?
@andresocampo5752
5 жыл бұрын
The Quan hits Back you can’t Chief
@RadioSilence
5 жыл бұрын
Sorry for the late reply, but I don’t think that particular Camo is going to be doable without hydro dipping. I would definitely recommend looking into it!
Looks great, now if I only had an air brush 😢 One thing I would suggest is to plug your barrel/cover your crown. When I painted my .22LR it took about 30 shots for it to hit accurately again until the paint was all worn off around the crown.
@RiskofRusty
3 жыл бұрын
I’d suggest removing the inner barrel and plugging the outer barrel with toilet paper - same deal with the magwell, the space between the trigger/receiver, and the motor plate if applicable.
For those without an airbrush, I wonder how effective the sponge method would be for the shadowing
@darylobey8867
2 жыл бұрын
It has a cool efect :) or with a rag gently rub the edges or even a smol paint brush wil also work
@LittleRusha
Жыл бұрын
Do what grafiti artists do and put the core of an empty Bic pen on the end of your spray paint can
Did you sand anything?
Gun looks great 👍 The music reminds of a facebook video of a young girl baking cupcakes for her daughters birthday party👎🏻
This is awesome! I tried it my ak 47
@trapboyjack5179
4 жыл бұрын
How did it hold up to the heat?
What laser system is that?
What paint did you use?!
what are the colors of those paints 1st coat and 2nd coat..
@erickgalloway1393
3 жыл бұрын
I was about to ask the same question that second paint coat had a great brown dark earth look to it. Paint job turned out looking great!
This looks cool and u may be wrong but I just think that painting like this could jam things up and make it kinda sketchy if not unsafe to shoot but explain if I’m wrong 😁👍
@10milliBuddha.
Жыл бұрын
How exactly? If the bolt is covered everything should work as normal
Nice paint job! FYI If you paint your suppressor when you fire your weapon it will cook the paint on it leaving a smell for you to be detected. Happy hunting friends!
Subbed
What is the bran of clear coat did you use?
@RadioSilence
4 жыл бұрын
Rustoleum, same brand as the spray paints
Subbed, absolutely helpful! Now, should I take my gun apart? i'm scared that the paint will get in places where it not belongs
@RadioSilence
4 жыл бұрын
I didn't take mine apart! Just make sure to thoroughly plug every hole or gap where paint could get in and you're all good 🙂
@crewgadjy
4 жыл бұрын
RadioSilence just use of instead of the darker brown and a lighter green instead of the tan. That will give you a green tiger stripe. Practice on a old springer or something if in doubt.
@vulturelarson164
3 жыл бұрын
Take the bcg and charging handle out then cover any laser, light or optics no paint got in-between the upper and lower for me