Never a dull moment on your channel, thank you for the great information.

Thank you so much! Great information. Simple and direct, as usual. I am grateful for your clear teaching style. Blessings.

@watersstanton

2 жыл бұрын

You are so welcome!

Very interesting technique, and so easy to use. I’m in the process of setting up and end-fed antenna (40 meter primary band, 49:1 unun) in my yard in Seattle, WA and thanks to you I now know a very good way to test its performance. Thanks very much, Peter. 73 (KK7CSC)

@watersstanton

2 жыл бұрын

Glad it was helpful! Hope all goes well. 73 Peter

Great advice Peter! I’ve done this and it’s very interesting

@watersstanton

2 жыл бұрын

Good to hear. 73 Peter

Great video. Can’t wait to try this out on my antennas.

@watersstanton

2 жыл бұрын

Have fun!

Another great video Peter, following on from your video on verticals in small gardens, i’m going to experiment. Merry Christmas M0UDB

@watersstanton

2 жыл бұрын

Happy holidays!Thanks Dave. Happy Christmas to you also. 73 Peter

A very practical video, Peter and crystal clear as usual. I find that on my Icom 9700, even dialling my output power down to zero, give an output of around 15mW, which on couple of occasions has been enough to generate a reply, so for me hitting the Fbkin button was needed! 73, M0YZT

@watersstanton

2 жыл бұрын

OK thanks for that. 73 Peter

Thank you once again a great video from you I realy enjoyed it.

@watersstanton

2 жыл бұрын

Glad you enjoyed it

I've recently discovered your KZread channel, and I must say it is an excellent resource for HAMs like me. TU ES 73 DE W5SRT, TX USA.

@watersstanton

2 жыл бұрын

Hi Dan, great to hear from you. Take care. 73 Peter.

Nicely explained Peter 👍👏👏

@watersstanton

2 жыл бұрын

Thanks 👍

This is fascinating stuff, never realised any of this.

@watersstanton

2 жыл бұрын

Many thanks. 73 Peter

Great information. Thank you.

@watersstanton

2 жыл бұрын

Glad it was helpful!

Can only concur with the comments below Peter. Great video and Tuition style.

@watersstanton

2 жыл бұрын

Many thanks Paddy. Take care 73 Peter.

Thank you for all that you do. Best, Dave K7CI

@watersstanton

2 жыл бұрын

Many thanks Dave. 73 Peter

Thanks for that Peter, I've been meaning to have a go at the reverse repeater system. Hope you have a good Christmas and New year. DE Steve G7HUJ

@watersstanton

2 жыл бұрын

Happy holidays! 73 Peter.

Hi Peter, I have been using it for a year now. Well worth trying a dead band very surprising the band could well be open. I always have it open when I switch the radio ON and open the logbook. Happy Christmas to all at WS

@watersstanton

2 жыл бұрын

Thanks fir sharing. 73 Peter

Nice video explaining reverse beacon network, but not all of us use these fancy radios with built in keyer and waterfalls. 56 SSB confirmed dx countries on LOTW with 40/15 and 17 ground mount verticals in 2 yrs of covid. thanks for your videos, I've learned alot. 73 de KI7MJU

Thank you. Just starting out and this was incredibly helpful. I like the general discussion with the specific CW walk around. Now I know what I need to research next.

Thank you...this may help. I'm having some issues with my HF g5rv lite installation.

@watersstanton

2 жыл бұрын

Glad it helped

Thank you so much for the excellent video. Just what I was looking for. Your teaching and demonstration is so relaxing and still so professional. Feels like I am a guest in your studio!! Will rewatch and try tonight.

@watersstanton

2 жыл бұрын

Glad it was helpful! Very nice words, Take care, 73 Peter

a good tip for checking and comparing antennas and look forward to use cw for a change

@watersstanton

2 жыл бұрын

Glad it was helpful!

Many thanks! Reverse Beacon Network is just the ticket! That and your advocacy for EFHW antennas are pulling me out of a deep stupor. 🗿

That’s very cool!

@watersstanton

2 жыл бұрын

You are welcome. 73 Peter.

Hello Peter. Gosh, it looks like you have a problem with the LCD display on your 7300. There is a line at the top . I bought my 7300 from your shop with the first batch that you received...I think that was March 2015. I was so impressed with it, that I bought a second 7300 six months later. I have had no problems with either of them. That LDG 49:1 looks like a handy thing to have...and cheap as chips. I have 1 KW 49:1 transformers for my EFHW antennas at home. But I think I might get one or two of those LDG ones for portable ops. 73 5Z4J, ZS5J

@watersstanton

2 жыл бұрын

Many thanks. 73 Peter

Thanks Peter, most interesting. Happy holidays and keep safe 👍

@watersstanton

2 жыл бұрын

Same to you! Many thanks. 73 Peter

Brilliant as usual. Thank you once again

@watersstanton

2 жыл бұрын

Thanks again!

Nice.............................

@watersstanton

2 жыл бұрын

Thanks

Cheers Peter. Excellent video. Was not aware of this, so going to try out this weekend. I suppose this is in some ways similar to the WSPR network? But without the need for specific installed software. Thx, , Mark 2E0MSR.

@watersstanton

2 жыл бұрын

Yes, exactly. 73 Peter

thank you peter for all your videos ,seasons greetings to you your family and all the staff. james 2e0tdy essex

@watersstanton

2 жыл бұрын

Thanks James. Happy Christmas. 73 Peter

Thanks for the video. RBN is a very useful tool. Also, please check your audio before uploading :-) Part of the video, the audio was on the right channel.

@watersstanton

2 жыл бұрын

Sorry for that. It was a voice over setting error. Peter

Another great video, Peter…It’s worth mentioning that, on the reverse beacon website, you can bring up all your reverse beacon responses superimposed onto a World map that gives an excellent visual overview of your antenna performance.. 73..

@watersstanton

2 жыл бұрын

Hi John, thanks for that. 73 Peter.

Thank for the great videos!! Is there a way test the RBN ona radio that does not have CW memories? I have a Xeigu G90, new antenna and I don't know CW. Thank you.

@watersstanton

2 жыл бұрын

Unfortunately you will need to send CW. It should nit be too difficult to simply learn the e characters of your call and follow this with “test” - that is all you need. 73 Peter.

I seem to have a problem. My back yard is big enough for a 20m antenna but I don't have enough room for a garden. Does the garden act as a counterpoise... :-) Great Videos Happy Holidays!

@watersstanton

2 жыл бұрын

No, you should be OK. Many antennas are erected over concrete and indeed above flat-roofed buildings. 73 Peter.

Hello Peter, is the callsign in the above intro text correct ? G3OJB or G3OJV ? Great video thanks, 73, Jamie VK2YCJ

@watersstanton

2 жыл бұрын

Yes, It was a typo. Should be G3OJV

I tried this when the greyline was at my QTH. The RBN showed the 40m going east and the 20m going west, within minutes of each test. Expected, but it was rather striking.

@watersstanton

2 жыл бұрын

That's interesting. Thanks for comment. 73 Peter.

I'm a new Ham and find your videos very helpful. I tried this but didn't get any reports when I went to reverse beacon website what am I missing? Thanks K2MWC 73

@watersstanton

2 жыл бұрын

You need to send pretty good Morse cide but if generated by radio that should be mo problem. You must send in the CW section of the band ie ie near tge bottom. Reports take several minutes to come back.

An interesting idea Peter, do you happen to know if the IC705 has the CW memories? Thanks 73’s

@watersstanton

2 жыл бұрын

Yes it does.

@dieselbushcraft1299

2 жыл бұрын

@@watersstanton Thank You

👍👍

@watersstanton

2 жыл бұрын

Thanks.

I am sitting my exam in January, in the meantime can I test without a call sign to check my antenna? Regarding the end fed wire antenna, 20m, can I bend it once to fit my garden?

@RESISTAGE

2 жыл бұрын

legally no. can u get caught? no. just don't interrupt.

@watersstanton

2 жыл бұрын

YOU CANNOT TRANSMIT WITHOUT A LICENCE!

You can also get how much your antenna is getting out is by looking at the PO meter while transmitting. If you're set at 100W and the meter says 100 you pretty much transmitting 100W. If the PO meters shows 50W you know you're loosing power somewhere. Non resonate antenna, line loss, bad SWR or a combination thereof.

@watersstanton

2 жыл бұрын

The power output has no connection with propogation!

Outstanding video once again Sir, just one question, around how much SNR is considered good. TNX

@watersstanton

2 жыл бұрын

Noise level can be anything between zero and S9 plus. There is no bench mark.

Typo in your callsign Peter....B is next to V!

@watersstanton

2 жыл бұрын

Thanks. 73 Peter

BK-IN won't work, just keys up VOX. Must I have a key plugged in?

@jamesschmaus8597

2 жыл бұрын

I am in CW mode and have menu keyer on , preset message just wont transmit, only plays cw message

@watersstanton

2 жыл бұрын

Have you selected CW mode?

J.H.A Z-25k 5w in parallel with 10m antenna

@watersstanton

2 жыл бұрын

Many thanks. 73 Peter

Good Monday morning to you sir

@watersstanton

2 жыл бұрын

. 73 Peter Morning

Peter great video but my 991a won't do that 🙃

@watersstanton

2 жыл бұрын

Ah - in that case yiu need to be abke to manually send CW. Sorry. 73 Peter.

@paulsengupta971

2 жыл бұрын

I'm not sure about that. I've got it programmed into my 991 (not A) and it works. It has five memories for morse strings which can be sent in the same way. Look in the manual under CW and then contest memory thingie. It's the second bit under "Text".