What is the best, easiest, correct way to handle this odd IBC Tote valve? #onemanonetruck #evolution #hustle #2023washseason
Жүктеу.....
Пікірлер: 86
@yanislav16 Жыл бұрын
That dude just picked up and carried GX690 Pressure Washer like it was nothing 😲
@powerfulimprovements
Жыл бұрын
💪🏼😎👉🏼
@Johnnyreengo
Жыл бұрын
Exercise is free
@newviewnc Жыл бұрын
Just need to point out.. Mike C needed 2 people to lift his 8gpm…. Joe walked out of the shed.. strolling with it solo
@peternguyen4047
Жыл бұрын
Jesus, I had the same thought😳
@TheFreshRinse
Жыл бұрын
Brothers, I can’t lift my legs without help!
@TheFreshRinse
Жыл бұрын
Let’s also point out that I’ve never tipped over my oil pan, like an idiot!😊
@MannyAguilarJr
Жыл бұрын
PW is about 200Lbs, motor 103 Lbs, pump 40Lbs, all the other parts make up the rest. But it would be easier to pick up in Joe's orientation being gear reduction drive.
@TheFreshRinse
Жыл бұрын
@@MannyAguilarJr I agree. I’m not attempting in regardless. Certainly not off the floor. MAYBE off a table.
@lynchburgprowash5867 Жыл бұрын
Joe, I ran into this problem myself. Some of the bulkhead fittings do not match up with cam lock style adapters. I found I had to use a fernco fitting from Lowe’s and just slide it over the fitting and clamp it down. It works great, zero leaks.
@rickwashek478 Жыл бұрын
Only Joe is washing in January, in the north east. You da man. 🤣🤣💪💪👍🌨️🌨️🥶
@sewkingwet Жыл бұрын
those 2" cam locks on the ibc are awesome, I prefer them. mine has same style, I use a gator lock cam locks, they are spring locking pins and dont have to use the annoying cotter spring clip things. get a 2" female cam lock with 2" npt threads and make your connection how you want. personally I run all 1" bulkheads out the lowest point on the side of my ibc tank near my machines for all my water feed lines, I use the 2" cam lock valve for dumping tanks to travel and filling buckets/handwashing. Never had leaking issues with bulkhead feeds
@Chris72401 Жыл бұрын
2 or 3" camlock (gatorlock from tractor supply) with either mnpt or fnpt then a reducer and/or barb
@jaycropper2467 Жыл бұрын
Yup camlock will wicked work get ya! Get a piece of 6x6 to hold the plumbing vertical and knock the stress off the cap you’re looking at is a temporary shipping cap used to prevent spills in transit.
@MNpicker Жыл бұрын
Quick and slick.. I like it..
@michaelc7283 Жыл бұрын
Joe, You have a camlock style valve. Get a camlock adapter with tread on the other end. This way you can connect the tread pipe. I hope that helps.
@ivanvasconez3940
Жыл бұрын
That is what i did to have as a 2inch drain
@MannyAguilarJr
Жыл бұрын
Yeah I ordered mine from pressure washer products 2" cam lock to 2" FPT Then I got the adapter 2" MPT to 1.5" FPT Then I just did 1.5" fittings from there to barbs for the 1.5" hose
@MannyAguilarJr Жыл бұрын
For the tote outlet I ordered mine from pressure washer products 2" cam lock to 2" FPT Then I got the adapter 2" MPT to 1.5" FPT Then I just did 1.5" fittings from there to barbs for the 1.5" hose
@richardpowers4200 Жыл бұрын
Hi Joe! Ouch on the oil spill. I am going to try “BacKrete” on oil stains this year.
@powerfulimprovements
Жыл бұрын
Let me know if it works
@mikeallover Жыл бұрын
3” cam locks from Tractor Supply or similar store. It will slip over your valve nipple and lock on to it. You can get female or male threads on the other end. I have my tanks set up this way.
@MannyAguilarJr
Жыл бұрын
Are you sure 3" and not 2". My tote has a different style valve but it's a 2" cam lock.
@petermajka7474 Жыл бұрын
joe, I saw all kinds of different IBC tote fittings on amazon a few weeks ago. you can probably overnight ship them too. try using keywords like "rain barrel" too
@powerfulimprovements
Жыл бұрын
Already fixed. 2” banjo
@chrisstoner6913 Жыл бұрын
So impressed with the McGyver but yeah a 2 " or 3" camlock over that will work for sure.
@powerfulimprovements
Жыл бұрын
✌🏼❤️
@justinwest7765 Жыл бұрын
Check out that link, I use a cam lock to npt adapter. I believe mine is banjo name brand. I’ll send my exact part to you tomorrow via text message around lunch.
@jeremyharmon251 Жыл бұрын
Camlock from tractor supply, I just went through this on my rebuild.
@dalewilson7434 Жыл бұрын
The guy you bought the tanks from might have the adapters for this or could tell you where you can get them. Good luck 👍
@PlatinumPowerWashing Жыл бұрын
It's a 2" camlock fitting. I have one on mine. Made of aluminum. It has 2" npt female threads on it. Then I use pvc fittings to adapt to your suction line.
@00700556
Жыл бұрын
This is exactly my setup
@Brabyscastlewash Жыл бұрын
Just carries the machine out lmfao 🤣 then tomorrow morning wondering why u can't get outta bed lol I bet that was heavy for sure
@powerfulimprovements
Жыл бұрын
Popcorn
@parsonicservices3576 Жыл бұрын
Gator/Cam lock from tractor supply
@Fortyfive79 Жыл бұрын
Gator Lock 2 in. Camlock Quick Coupler, part B at tractor supply is what i use
@jessiahpedde9700 Жыл бұрын
I had the exact same issue on my old rig. as others have suggested, I had to use a cam-lock adaptor
@powerfulimprovements
Жыл бұрын
✌🏼❤️
@jessiahpedde9700
Жыл бұрын
@@powerfulimprovements instead of using the camlock and then a bunch of adaptors and hoseclamps, I went to a specialty hose place and had a 2" assembly made up that has the cam on one end and the proper hookups for my machines on the other. lots of flow, and very clean looking.
@powerfulimprovements
Жыл бұрын
@@jessiahpedde9700 sweet!
@mattpatunas7550 Жыл бұрын
Mikey like it …MIKEY LIKE IT !!!!
@supremeexteriorcleaning Жыл бұрын
I’m guessing you already found a solution but you might have good luck at tractor supply if you have one locally. 2” female cam lock with threads on the end to fit your adapter. I ordered on that gates down to a hose barb if I need to feed water to a portable unit off of the trailer.
@powerfulimprovements
Жыл бұрын
Much appreciated
@scottferguson9399 Жыл бұрын
What's up Joe!! 👍 ✌️
@powerfulimprovements
Жыл бұрын
Scott! 💪🏼💪🏼
@mattpatunas7550 Жыл бұрын
We to go big dog !!!!
@waytruthlifedisciple Жыл бұрын
Will that gas tank need to be higher than the pressure washer to gravity feed or is there a fuel pump somewhere in the mix?
@powerfulimprovements
Жыл бұрын
The gx690 has a fuel pump. So it pulls
@waytruthlifedisciple
Жыл бұрын
@@powerfulimprovements awesome! The lower gpm washers i use don't have fuel pumps, so i bought a pump. Still haven't reconfigured for this season yet though.
@levitaddios1 Жыл бұрын
I don’t know what happened after Joe carried the 8gpm all by HIMSELF! I lost it! 😂😂 Mike C need some learning to do! 😅
@powerfulimprovements
Жыл бұрын
💪🏼💪🏼
@palmtree8604 Жыл бұрын
Eat your Wheaties kids. Wash season is coming 💪💪
@powerfulimprovements
Жыл бұрын
💪🏼💪🏼
@davidlemote9042 Жыл бұрын
I’m a little late but cam lock on the tote
@powerfulimprovements
Жыл бұрын
✌🏼❤️
@jonathanhavel1036 Жыл бұрын
They have male and female camlocks. You need a 2 inch camlock size wise
@derrickbell3087 Жыл бұрын
That’s is a camlock “fitting” valve. You can keep that one in making it easy to take off or swap it for a plain by threaded valve. Easy fix. I would leave the camlock for easy take off
@bigrobbigrob7156 Жыл бұрын
💪
@mattpatunas7550 Жыл бұрын
Going back to da basics
@TheFreshRinse Жыл бұрын
I thought we were going to keep this between us?
@powerfulimprovements
Жыл бұрын
Well… 🤷🏼♂️
@symplemynd57 Жыл бұрын
Looks like a 3" camlock fitting on your tank
@powerfulimprovements
Жыл бұрын
Do you mean where the valve meets the tank? Silver ring?
@warriorofgodfitness488
Жыл бұрын
No it’s the part you asked about a special threads. That is actually a male fitting not female. Like these guys said go to tractor supply or somewhere similar and you should find these.
@powerfulimprovements
Жыл бұрын
@@warriorofgodfitness488 yes. Now I get it. Much appreciated
@warriorofgodfitness488
Жыл бұрын
No problem I’m new to this stuff and have learned a lot from you. Still in the process of building my rig hopefully will be ready early spring.
@warriorofgodfitness488
Жыл бұрын
No problem I’m new to this stuff and have learned a lot from you. Still in the process of building my rig hopefully will be ready early spring.
@colinpflueger1898 Жыл бұрын
Cam lock from tractor supply
@powerfulimprovements
Жыл бұрын
Are you referring to the silver part that attaches to the tank?
@Brabyscastlewash Жыл бұрын
That black box for the battery I'd put the hole on the back not the top if u could then after u can just buy a grommet for it and water won't go in when it rains u pointed at the top is all
@powerfulimprovements
Жыл бұрын
Exactly
@scottschumacher1585 Жыл бұрын
Any 2 inch female cam lock will fit over that fitting on your tote Joe.
@crystalclearwindowsllc Жыл бұрын
There's an outer adapter for that
@yeahhbui Жыл бұрын
That is a camlock fitting.
@rogerbrandt66786 күн бұрын
You don’t use tape.?
@powerfulimprovements
6 күн бұрын
@@rogerbrandt6678 I do when it counts
@KentuckyWashPros Жыл бұрын
No need to show off packing 200lbs around like it’s nothing 😂
Пікірлер: 86
That dude just picked up and carried GX690 Pressure Washer like it was nothing 😲
@powerfulimprovements
Жыл бұрын
💪🏼😎👉🏼
@Johnnyreengo
Жыл бұрын
Exercise is free
Just need to point out.. Mike C needed 2 people to lift his 8gpm…. Joe walked out of the shed.. strolling with it solo
@peternguyen4047
Жыл бұрын
Jesus, I had the same thought😳
@TheFreshRinse
Жыл бұрын
Brothers, I can’t lift my legs without help!
@TheFreshRinse
Жыл бұрын
Let’s also point out that I’ve never tipped over my oil pan, like an idiot!😊
@MannyAguilarJr
Жыл бұрын
PW is about 200Lbs, motor 103 Lbs, pump 40Lbs, all the other parts make up the rest. But it would be easier to pick up in Joe's orientation being gear reduction drive.
@TheFreshRinse
Жыл бұрын
@@MannyAguilarJr I agree. I’m not attempting in regardless. Certainly not off the floor. MAYBE off a table.
Joe, I ran into this problem myself. Some of the bulkhead fittings do not match up with cam lock style adapters. I found I had to use a fernco fitting from Lowe’s and just slide it over the fitting and clamp it down. It works great, zero leaks.
Only Joe is washing in January, in the north east. You da man. 🤣🤣💪💪👍🌨️🌨️🥶
those 2" cam locks on the ibc are awesome, I prefer them. mine has same style, I use a gator lock cam locks, they are spring locking pins and dont have to use the annoying cotter spring clip things. get a 2" female cam lock with 2" npt threads and make your connection how you want. personally I run all 1" bulkheads out the lowest point on the side of my ibc tank near my machines for all my water feed lines, I use the 2" cam lock valve for dumping tanks to travel and filling buckets/handwashing. Never had leaking issues with bulkhead feeds
2 or 3" camlock (gatorlock from tractor supply) with either mnpt or fnpt then a reducer and/or barb
Yup camlock will wicked work get ya! Get a piece of 6x6 to hold the plumbing vertical and knock the stress off the cap you’re looking at is a temporary shipping cap used to prevent spills in transit.
Quick and slick.. I like it..
Joe, You have a camlock style valve. Get a camlock adapter with tread on the other end. This way you can connect the tread pipe. I hope that helps.
@ivanvasconez3940
Жыл бұрын
That is what i did to have as a 2inch drain
@MannyAguilarJr
Жыл бұрын
Yeah I ordered mine from pressure washer products 2" cam lock to 2" FPT Then I got the adapter 2" MPT to 1.5" FPT Then I just did 1.5" fittings from there to barbs for the 1.5" hose
For the tote outlet I ordered mine from pressure washer products 2" cam lock to 2" FPT Then I got the adapter 2" MPT to 1.5" FPT Then I just did 1.5" fittings from there to barbs for the 1.5" hose
Hi Joe! Ouch on the oil spill. I am going to try “BacKrete” on oil stains this year.
@powerfulimprovements
Жыл бұрын
Let me know if it works
3” cam locks from Tractor Supply or similar store. It will slip over your valve nipple and lock on to it. You can get female or male threads on the other end. I have my tanks set up this way.
@MannyAguilarJr
Жыл бұрын
Are you sure 3" and not 2". My tote has a different style valve but it's a 2" cam lock.
joe, I saw all kinds of different IBC tote fittings on amazon a few weeks ago. you can probably overnight ship them too. try using keywords like "rain barrel" too
@powerfulimprovements
Жыл бұрын
Already fixed. 2” banjo
So impressed with the McGyver but yeah a 2 " or 3" camlock over that will work for sure.
@powerfulimprovements
Жыл бұрын
✌🏼❤️
Check out that link, I use a cam lock to npt adapter. I believe mine is banjo name brand. I’ll send my exact part to you tomorrow via text message around lunch.
Camlock from tractor supply, I just went through this on my rebuild.
The guy you bought the tanks from might have the adapters for this or could tell you where you can get them. Good luck 👍
It's a 2" camlock fitting. I have one on mine. Made of aluminum. It has 2" npt female threads on it. Then I use pvc fittings to adapt to your suction line.
@00700556
Жыл бұрын
This is exactly my setup
Just carries the machine out lmfao 🤣 then tomorrow morning wondering why u can't get outta bed lol I bet that was heavy for sure
@powerfulimprovements
Жыл бұрын
Popcorn
Gator/Cam lock from tractor supply
Gator Lock 2 in. Camlock Quick Coupler, part B at tractor supply is what i use
I had the exact same issue on my old rig. as others have suggested, I had to use a cam-lock adaptor
@powerfulimprovements
Жыл бұрын
✌🏼❤️
@jessiahpedde9700
Жыл бұрын
@@powerfulimprovements instead of using the camlock and then a bunch of adaptors and hoseclamps, I went to a specialty hose place and had a 2" assembly made up that has the cam on one end and the proper hookups for my machines on the other. lots of flow, and very clean looking.
@powerfulimprovements
Жыл бұрын
@@jessiahpedde9700 sweet!
Mikey like it …MIKEY LIKE IT !!!!
I’m guessing you already found a solution but you might have good luck at tractor supply if you have one locally. 2” female cam lock with threads on the end to fit your adapter. I ordered on that gates down to a hose barb if I need to feed water to a portable unit off of the trailer.
@powerfulimprovements
Жыл бұрын
Much appreciated
What's up Joe!! 👍 ✌️
@powerfulimprovements
Жыл бұрын
Scott! 💪🏼💪🏼
We to go big dog !!!!
Will that gas tank need to be higher than the pressure washer to gravity feed or is there a fuel pump somewhere in the mix?
@powerfulimprovements
Жыл бұрын
The gx690 has a fuel pump. So it pulls
@waytruthlifedisciple
Жыл бұрын
@@powerfulimprovements awesome! The lower gpm washers i use don't have fuel pumps, so i bought a pump. Still haven't reconfigured for this season yet though.
I don’t know what happened after Joe carried the 8gpm all by HIMSELF! I lost it! 😂😂 Mike C need some learning to do! 😅
@powerfulimprovements
Жыл бұрын
💪🏼💪🏼
Eat your Wheaties kids. Wash season is coming 💪💪
@powerfulimprovements
Жыл бұрын
💪🏼💪🏼
I’m a little late but cam lock on the tote
@powerfulimprovements
Жыл бұрын
✌🏼❤️
They have male and female camlocks. You need a 2 inch camlock size wise
That’s is a camlock “fitting” valve. You can keep that one in making it easy to take off or swap it for a plain by threaded valve. Easy fix. I would leave the camlock for easy take off
💪
Going back to da basics
I thought we were going to keep this between us?
@powerfulimprovements
Жыл бұрын
Well… 🤷🏼♂️
Looks like a 3" camlock fitting on your tank
@powerfulimprovements
Жыл бұрын
Do you mean where the valve meets the tank? Silver ring?
@warriorofgodfitness488
Жыл бұрын
No it’s the part you asked about a special threads. That is actually a male fitting not female. Like these guys said go to tractor supply or somewhere similar and you should find these.
@powerfulimprovements
Жыл бұрын
@@warriorofgodfitness488 yes. Now I get it. Much appreciated
@warriorofgodfitness488
Жыл бұрын
No problem I’m new to this stuff and have learned a lot from you. Still in the process of building my rig hopefully will be ready early spring.
@warriorofgodfitness488
Жыл бұрын
No problem I’m new to this stuff and have learned a lot from you. Still in the process of building my rig hopefully will be ready early spring.
Cam lock from tractor supply
@powerfulimprovements
Жыл бұрын
Are you referring to the silver part that attaches to the tank?
That black box for the battery I'd put the hole on the back not the top if u could then after u can just buy a grommet for it and water won't go in when it rains u pointed at the top is all
@powerfulimprovements
Жыл бұрын
Exactly
Any 2 inch female cam lock will fit over that fitting on your tote Joe.
There's an outer adapter for that
That is a camlock fitting.
You don’t use tape.?
@powerfulimprovements
6 күн бұрын
@@rogerbrandt6678 I do when it counts
No need to show off packing 200lbs around like it’s nothing 😂
@powerfulimprovements
Жыл бұрын
💪🏼💪🏼✌🏼❤️
First
@powerfulimprovements
Жыл бұрын
💥💥💥💥💥