(HELP) I Can't SEE My Mig Welds Auto-Dark Helmet (Settings Revealed)
Автокөліктер мен көлік құралдары
In this video I share with you my auto dark welding helmet settings. These are the basic settings to get you stacking dimes faster. I hope this helps yall on your welding journey and speeds up your welding. Thank you guys for all the support and kind comments!!! Below are the links to the light for the welding helmet ,the welding helmet and the link to my website. These links below are affiliate links, I make a small commission on qualified purchases at no additional cost to you.
Vulcan Welding Helmet amzn.to/3Pj0gdH
ILLUMI-WELD LIGHT Link illumiweld.com/?aff=2
AC Designs Garage Web Link www.acdesignsgarage.com/
Odelfi Head Lamp (another choice) odelfi.com/discount/ACDESIGNS...
Пікірлер: 38
I really like that light idea. I’ve been having trouble seeing my welds and just picking this helmet up.
@ACDesignsGarage
Ай бұрын
I never thought of it before but it really helped me!! Thanks for watching!!!!
I just started mig welding and your channel has help me tremendously. Thank you Sir
@ACDesignsGarage
4 ай бұрын
Awesome, thank you for watching!!!! Let me know if there are any topics you want to see videos on!!!!
Thank you! I didn't feel stupid for not knowing. You rock!
@ACDesignsGarage
Ай бұрын
Thank you for watching, hope it helped!!!
Just ordered two shirts, thank you for the great videos.
@ACDesignsGarage
4 ай бұрын
Awesome we really appreciate your support!!!!thanks for watching!!!! Packin them up now!!!!
Thanks for making this. It earned you another subscriber!
@ACDesignsGarage
5 ай бұрын
Awesome thank you very much!!!!
Once again… very helpful shop advise. Thx!
@ACDesignsGarage
8 ай бұрын
Thanks man!!!
too much camera motion.
great information, thanks,
@ACDesignsGarage
8 ай бұрын
Thanks for watching!!!!!!
No need to cut a hole. A little velcro and a dime store headlight does the same job.
I cannot see well no matter the settings. I tried them all. So, bought another helmet that was favorably reviewed. It worked slightly better, but, again, could not see, no matter the settings. The sensitivity and delay work fine. It just seems like the shade does not do much. I wish I had a friend with a fancy $300 helmet so I could try it. I can see the weld puddle a little, so weld from what I "think" I should be doing. Yes, I am older now. When I was younger, I used a $10,000 Miller TIG and it was very easy. My original helmet that really did not work well at all was a clone of your Harbor Freight one, same settings and test button.
@ACDesignsGarage
2 ай бұрын
There tuff to see sometimes, another tip you can try is get a super bright flood light and light up your work space, it really helps!!!!
@joshua43214
Ай бұрын
Get your eyes checked for cataracts. I have had both eyes done, it is not a big deal these days. In the mean time, use bright flood lighting.
please tell me what is best setting sensitivity and delay i weld but my eyes cry next day please tell me i have shermanv6b mask i dont know how to set up
@ACDesignsGarage
5 ай бұрын
No problem, When I weld Mig My settings are usually 10 to 11 on the shade, as for sensitivity I turn it all the way up then look up at my lights in my shop and if it goes dark I keep turning it down till the lights wont activate the sheild. One thing to also look at ,and I've done it my self is Make sure your sheild is not in Grind mode because it will make your eyes burn. Hope this helps Merry CHRISTmas!!!!
I like all my Harbor Freight tools and equipment as much as the next guy but I’m not sure of the safety of their welding helmets. I might just stick with Speedglas, Miller or Viking.
@ACDesignsGarage
8 ай бұрын
I dont think HF makes the vulcan hood but not totally sure, works pretty good for the cost, I understand what your saying, you only get one set of eyes, thanks for watching!!!!
My mask gets fogged up on the inside, but I’m going to try a bit of shave foam and buff it off. It works in the car lol…
@ACDesignsGarage
8 ай бұрын
That ill work lol, maybe try rainX
I love my electric car but a rod definitely needs a V8 at least, the sound is as important as it's looks.
@ACDesignsGarage
8 ай бұрын
Yes I agree street cars are fine but not in a hotrod!!!
@donwhite8632
8 ай бұрын
Thank you very much
Try keeping the camera steady as your making me sea sick,
@ACDesignsGarage
4 ай бұрын
Its tough sometimes
Help!what is the adjustment on my trusoxin welding helmet .I got it for my birth day can you help tom Conroe tx
@ACDesignsGarage
Ай бұрын
Ill have to look into that,
Head lamp link not working.
@ACDesignsGarage
8 ай бұрын
Thank you for letting me know, just fixed it!!!
Helmets NOT available so.........
Can you get cheaters for these
@ACDesignsGarage
8 ай бұрын
Most of these new hoods you can get a cheater for, they usually have a slot on the inside to slide them in.
@lowellsmith71
7 ай бұрын
yeah Miller cheaters work in mine.