Heavy Duty Wheel Bearing Installation and Adjustment - Bower Heavy Duty Bearings by NTN
Автокөліктер мен көлік құралдары
In this video, NTN Senior Applications Engineer, Corey DeDolph, demonstrates heavy duty wheel bearing installation while referencing TMC procedures “RP618: Wheel Bearing Adjustment” and “RP622: Wheel Seal and Bearing Removal, Installation and Maintenance”.
You will learn how to install heavy duty wheel-end tapered roller bearings, and how to measure and adjust for the proper amount of bearing end-play. You will also learn some helpful installation tips that will make your next wheel end job go nice and smooth.
Check out our Bower Heavy Duty Bearings by NTN KZread channel for more heavy duty bearing tech tips, installation demos and other useful topics, and don’t forget to subscribe!
/ bowerheavydutybearings...
Пікірлер: 5
This was very good thank you for this information
@NTNBearings
2 ай бұрын
Glad it was helpful! You can check out some additional videos on heavy duty truck bearings over on our Bower Bearings by NTN channel here: www.youtube.com/@BowerBearings
Very well done ! Thank You !
Heating aluminum wheel hub with torch will ease installation of cups .Not acceptable practice to hammer cup onto cup .Install 5/16-18 tap into battery powered drill and clean hubcap holes . Blow holes out with air . Install new bolts with anti-seize .Coat both side of hubcap gasket with anti-seize , gasket will remove easily in the future .
There's a cartoon showing a caveman hammering a rock into a stone wheel. That's what you are if using a hammer and not using a press. Correct tool for the job and procedure makes for a reliable repair/replacement.