Pretty much the best video example of heaving to. You even explain how to resume sailing from there. A big newbie thumbs up. Thanks!

"Heaving-to onto starboard tack reduces your give-way obligations." that's really an important point. Thank you.

For me, your videos are the clearest explanation of basic sailing techniques. Sailing tomorrow in Kaoshiung, Taiwan.

May want to bear in mind that hove-to on a port tack versus a starboard tack has its pros and cons when rules of the road are applied. Great simple video, and indeed a lunch break opportunity.

This is a really clear video. I now know how to Heave-to

You put out some very good instructional videos. Very good.

Thank you so much! I've been meaning to practice this and you really simplified the explanation 💗🙏

Perfect. Practical and simple. Thank you!

Very informative video showing heaving to while actually sailing, thanks for this and happy times to you both!

Excellent Captain....thank you for the instruction!

Actually the best video example of hove to bare none. Most forget to cover basics on sailboat, 1) release the main sheet 2) after you are hove to stop steering boat & wait till boats stops moving then turn rudder to opposite side & lock rudder & enjoy some lunch.

Remarkably well explained tutorial, sir. Now I wish I was in my little sailboat dinghy to practice it, I can't wait for the weekend! Thumbs up!

How lucky I am To have found you. I’m a newbie and was wondering how this is done. Watched a few vids that were, well... ok. Then came across yours... really easy to follow and more importantly, remember. Thanks!

Thank you for another great video, we appreciate it!!!! ⭐️⭐️⭐️⭐️⭐️

Excellent video, well done and narrated. Beginning ASA certification in August and your videos are really helping me grasp not only the how to, but the why you need to know these maneuvers for safety, pleasure and confidence.

Enjoyed the video, finally an easy to follow video.

Very informative, as usual. Thank you.

Enjoyed video. Made easy to understand.

Super useful, thanks!

Great to know! Thank you so much!

thank you , great tutorial!

Great video, will help me with my ASA 101.

Best example I have seen.

Thanks for the tips!

Thanks for this.

Best example I have seen

Very good exercise!

Great Job!

Very useful video. Please leave out the loud music interludes for example at 1.30 the music adds nothing and obscures some of your instruction.

@IrregularPineapples

3 жыл бұрын

yes. good video nonetheless though very helpful to see it done in practice a few times! And on both sides! Thank you~

That's pretty darned cool.

Great to see you putting your winch handles away and not leaving them in the winch. For your rudder to have any effect in keeping the bow to wind, you must still have some forward motion, with no motion the rudder does nothing. All boats will heave to in a slightly different way and you are so lucky to have a boat that heaves to so easily, I'm guessing she has at least a long fin keel. These modern boats may be a knot or two faster but they don't like heaving to and its not all about the speed, is it. Thanks.

@SailFanatics

7 жыл бұрын

The initial stopping is very temporary as the boat actually puts some weigh on quickly, notice the 1 knot on the GPS. Once that movement starts, the wheel to windward becomes and remains effective. The Pearson 31-2 has a fin keel. I have have found one source of difficulty in heaving-to with various boats is if you keep the mainsail trimmed. On some boats having the main trimmed keeps the boat moving even when in the hove-to position., others the main trim does n't seem to have much effect. Thus my advice is to always release the mainsheet when heaving-to. After the boat is hove-to, you can experiment with trimming the main back, the effect is to cause the boat to sit closer to the wind, just stop trimming before the boat self-tacks out of hove-to.

Great lesson, as usual. Not such a great choice of music and way too loud. Other than that, great video. Keep 'em coming!

very nice Thank You

Thank you for the video. QUESTION: Would it be good for the crew, as a first step, to be certain the jib sheet is TIGHT, as it was in your video, to help assure the heave-to will work correctly?

@SailFanatics

4 жыл бұрын

Yes, however specifying to start the heave-to from a close hauled point of sail covers that issue as the point of sail requires that the the sheet would be trimmed in close.

Great video but why the really bad music, why any music.

So the main sheet is not tensioned at all while hove to....it remains free, able to adjust itself to wind directly forward?

@SailFanatics

5 жыл бұрын

The mainsheet may not NEED to be tensioned, however, by apply some tension to the mainsheet, you can affect the angle of the boat to the wind. On some vessels, should you trim the mainsheet fully in, the main may cause the boat to tack out of hove to.

I agree with what mrmrlee says below, "As I understand heaving to, the mainsheet is kept sheeted in, meaning the boom remains on the centerline of the boat, and the leading edge of the mainsail is blanketed by the jib sheeted to the windward side, helm to windward..."

So I'm new to sailing and got into a bit of trouble in my cal 20. I was single handing it, full powered, but my main was cleated on the mast. The winds picked up and I couldn't depower and the boat was heeling to near knockdown. I learned that I need to be able to release the main from the cockpit. Also, this is where my self-tending jib worked against me (while trying to keep it into the wind, the boat would tack and power up). I have so much to learn. Thanks for the great video. Does heaving to work in high winds?

@LimitedWard

5 жыл бұрын

Not only does heaving to work in high winds, but it's also a necessary maneuver to know if you're riding out a storm. Sailors have been known to survive winds in excess of 50 kts thanks to this technique.

excellent

Good video sir

new sailor question. If the main is eased out, how does one prevent it from jibing if the boat gets tossed around in the event the wind comes from a different direction? Great video though

@SailFanatics

2 жыл бұрын

If the wind changes direction gradually, the boat should rotate to follow it's new direction. If the wind were to change direction instantly, then anything can happen...

Great video - thanks. I agree with Paul below - your boat seems to be easy to hove to. I have a P31-2 also. I have done some practicing but still need to do more and will re-look at your video before I do. I think you have a smaller genoa than my 135. I've tried furling it a little and that seems to help. Yours looks like a 100 or 110? Anyway, thanks. Ron

@SailFanatics

7 жыл бұрын

Ron The sail is in fact a 135%. Two points that I think help slow the boat for heaving to - 1. after tacking to heave-to, keep the boat in the close-hauled position till it stops 2. let the mainsheet run free (so the main will not produce any drive that you dont need...) Let me know if this helps you at all.

I have had boats that heave to easily and I have been on others that no combination of sail trim will work. Depends on the rig. My friend's boat is an older 28 with a full keel. We have tried endless combinations and have had zero success. Makes me wonder if some designs just can't do it.

As I understand heaving to, the mainsheet is kept sheeted in, meaning the boom remains on the centerline of the boat, and the leading edge of the mainsail is blanketed by the jib sheeted to the windward side, helm to windward. Reason being, as the boat is rolling in heavy seas the boom will not swing wildly about, becoming a safety hazard to the crew unless a preventer is rigged. Also avoiding the possibility of the foot of the mainsail catching any seawater as the boat sways to leeward, a very bad situation indeed. So good video otherwise, but definitely recommend keeping that main sheeted all the way in!

@SailFanatics

7 жыл бұрын

Thank you for your comment. It is my experience that keeping the mainsheet trimmed in when heaving-to, often results in the boat tacking out of the hove-to position, as the pressure on the main overcomes the backed jib. Perhaps this result depends on the relative sail sizes... After releasing the main and heaving-to, you can of course trim in the main some to alter how the boat sits to the wind. If you find your boat happily sits hove-to with the main trimmed in all the way feel free to do so. Alternatively you can drop the main and secure the boom...

@mrmrlee

7 жыл бұрын

Thanks for the quick reply...I guess each boat is truly different. Hopefully will get out this week and try and see what works on my boat.

@ricardopassarelli6015

6 жыл бұрын

Agree, I like to cleat in the main a bit so that weather helm from the main and the then the rudder to windward will both serve to point the boat back up, only to be countered by the jib and bow's lee helm. The main goal of all of this is to be as peaceful and comfortable as possible so you can have a "timeout and a cuppa", so whatever works to do this is great. If you understand the beautiful feedback mechanisms of this stable servo, you can do it. Heaving to can turn a thrash into a nice day in an instant.

@slashusr

6 жыл бұрын

Got to agree %100 about preventer as I commented above. A hazard to crew and to rigging!

@danielseefahrt5221

5 жыл бұрын

I was also concerned about the mainsail sheet being free. Could be moving around dangerously in more extreme conditions

Would rigging a preventer on the boom be a good or bad idea?

@SailFanatics

3 жыл бұрын

I am not sure what benefit a preventer might provide in heaving to. The main is largely out of the equation, serving at most as a means to adjust the angle of the boat to the wind while hove to. So I dont know, but never tried it...

Instead of steering with helm could, you center it, lock it and, just adjust the main (in or more out) to search the balance? Cheers nice vid

@SailFanatics

7 жыл бұрын

When close hauled you can trim the main some to adjust how the boat is sitting to the wind, but if you center the wheel the boat will rotate and go downwind, dropping out of heove-to.

I am a fairly long time subscriber and agree the videos you make are great instructional tools. I revisit and refer them to newbies quite often. But the choice and volume level of the "music" is simply a big distraction. Not meant as an insult but please consider corrective action...also the video's content ends and then the recording runs with black screen for almost four additional minutes. Please edit...and thanks again!

Good video and I learned something. But the music was a bit loud in some places making it hard for me to hear you clearly.

Please add subtitles. The wind on the mic covers most of what you are saying. Otherwise very good video. Thanks!

I've been sailing for a few years, and didn't know about this. Thanks. Dunno if this is important to you, but the black space which goes on for about four minutes at the end will kill your stats (watch time) and push your videos down in the lists. Used to be you could edit this with yt software, but I think they dropped it.

@SailFanatics

7 жыл бұрын

WOW, that black space is not on the original video, and I dont think it was on this video when originally published...i

@electricalengineeringprofessor

7 жыл бұрын

I always check mine to make sure. They have their own algorithms after they upload. I use all HD when I upload, but the download is always different.

@electricalengineeringprofessor

7 жыл бұрын

Whatever you do, don't delete this video - that also kills your stats, but even worse. It's a good video, just going to cost watch time.

@electricalengineeringprofessor

7 жыл бұрын

Option 2: Don't delete this video (most important), because it gets a lot of hits. But DO put a note at the beginning of the video to click on "this link" to see a "better version" of it, and then upload and link a corrected version. The new version will pick up traction where this one leaves off.

No preventer? Am I missing something or is that main boom a potential head-knocker or goose-neck breaker?

@SailFanatics

6 жыл бұрын

Robert, I am not sure how that question relates to this video. One rigs a preventer when the boat is running, which the boat is not during this video. If you are commenting regarding a luffing main while hove-to, then the available solution is to trim in the mainsheet to minimize any luffing. If you tried to rig a prevent, the boat would be forced to tack...

Can this maneuver be used for man overboard instead of doing the figure 8 maneuver with the boat in order to reduce the distance between the person in he water and the boat?

@SailFanatics

7 жыл бұрын

Yes, it is an alternative that I find a little simpler than the figure 8. Actually both maneuvers are defined to involve sailing about two boat lengths away before returning, so its not really an issue per se pf distance, although it is a common mistake for people sailing a figure 8 to sail further than is needed fora sharp exercise. Sort of a common error. I do plan to do videos on both the figure 8 and the quick stop MOB procedures, once the boat is back in the water....

@588158

7 жыл бұрын

Thank You!

@mikedhsr007

7 жыл бұрын

I donn't see how hove-to replaces the maneuvers to position the vessel downwind of the MOB in order to approach the MOB keeping in mind that the MOB will be not be stationary.

@billy324jones

7 жыл бұрын

Backwinding the Jib is the fastest way I know to stop a boat. Once it has stalled, you can release the jib, fall off the wind, come down below the MOB and then work your way back to the MOB in a slow and controlled manner. The distance from the MOB is kept to a minimum, which allows your crew the best chances of keeping the MOB in sight. I have never seen a better way to recover a MOB while going upwind.

Great vids, but the music is kinda loud and peppy for the scene

You need to indicate what position you leave the main sheet in when you have completed the exercise.

@SailFanatics

7 жыл бұрын

By having "completed the exercise", I assume you mean that the boat is hove-to. The instructions for heaving-to say to release the mainsheet, that instruction remains valid while hove-to: just leave the mainsheet released. One can trim the mainsheet a bit to adjust the angle of the boat sitting to the wind, but you also just leave the sheet run out.

What are Colgegs?

@SailFanatics

3 жыл бұрын

Colregs is short for COLlision REGulations or "International Regulations for Preventing Collisions at Sea". See my video kzread.info/dash/bejne/lqeNwcuHd86robA.html

@pauleenwardbrown

3 жыл бұрын

@@SailFanatics Thank you. This is a very informative vid. I am a mate on ship 343 Sea Scouts and this vid (and some of your others) will be great to teach the scouts. Thank you again

@SailFanatics

3 жыл бұрын

@@pauleenwardbrown If you ever have an interest in my doing a Zoom lecture on an y of these subjects, I would be happy to do so.

You need to get a Bluetooth microphone, it is too hard to hear you.

Your sound quality makes it difficult to understand.

The music seriously detracts from the presentation.

Too bad the wind drowned out your voice

“It’s holding perfectly” please! You’re using an adverb. I speak for the one-woman Adverb Protection Society. Sorry to be picky in an otherwise excellent video lesson.

@williamaugusto4636

5 жыл бұрын

whats an adverb!! this is a sailing channel not an english lesson