Headlight on Pit Bike install without any batteries
Ойын-сауық
Showing how I installed a led light bar on my SSR 125 for cheap
Parts I used:
Look at this on eBay www.ebay.com/itm/251997308274
Look at this on eBay
www.ebay.com/itm/292979199994
Look at this on eBay
www.ebay.com/itm/324111249778
My bike: 2016 SSR 125
Gold bars
Pro Taper diamond grips
Red folding levers
Gold fuel filter
Gold gas cap
Custom led headlight kit
Red and white plastics
17t front sprocket
420x104 heavy duty chain
Black exhaust wrap
Fender Extender
Stiffer front suspension
Пікірлер: 305
Been looking at videos to try and figure out how to do this. Never understood what to do until I just watched yours! Very well done! Thank you!
Man, this is the first video that I’ve seen I’ve watched hundreds of them by now you simplified it on how to hook up the two yellow wires now my battery charges and I can get 12 V to the lights thank you sir. 🍻
You videos are different from other people normally it’s some 10 year old freaking out screaming and whining but you give out good information
Thanks so much for this vid! I'm trying to put a light on my CRF125
Damn good video sir!! You just saved me a good amount of coin not having to buy the Blitzpro so thank you very much.
@rtfvox
4 жыл бұрын
Did you ever get your light kit installed?
Great video very helpful I ordered a ssr it’s on it’s way right now I know I’ll need a light for it this is a very affordable way to have a light thanks for your help! :)
@arparekh5160
5 жыл бұрын
apne kahn se li he
Always wanted to do this now I know that's for the video and clear instructions 👌🏻
Hell yeah mine looks awesome! Thanks!
@rtfvox
7 жыл бұрын
Aidan steel awesome! glad to see everything worked out right!
Edge if the earth :) still one of my favorites
Going through the comments there’s been a lot of people (mostly seems to be the 140cc motors from what I’m reading) that are having dimming issues with this set up. To get around this, I used the same wiring from the rectifier to wire in a 12v rc car battery, then simply run your power from the battery to your switch and lights. Definitely has been an awesome upgrade to have a headlight on my pit bike. Thank you for the simplification in this video. A lot of the reading I did online was vague and confusing until I saw you do it
@JakeMinton
Жыл бұрын
@adamsquires1775 Have you got a link to the rc battery you used? Or could you point me in the right direction? Does it have to be a 4 wire battery and what size? I’m having problems with light flashing/flickering when at idle/low rpm using the same wiring as in this video.
Thanks for that great tutorial. Do you know if you can also run a front and back light ?
Awesome freaking video. Thanks brother you've helped me out.
Volumes is my fav band! definitely gonna try this on my bike tho
@rtfvox
7 жыл бұрын
Lee Thompson great band! Hope you had success with the light.
Thanks dude, very helpful video, I'm definitely doing this
Cheers mate, your directions were spot on, mines flashy at low revs. wont be idling much though chur
Have u anytime measured the output voltage coming from rectifier on positive wire. With load and without load what is the output voltage
@picapica8806
5 жыл бұрын
Quite dangerous, the regulator does work somewhat but ive seen +25V coming through the regulator (up to 80V ac at the stator), it might have been a cheap regulator because it lets peaks and transients through, this is how i blew an led, adding a battery/ capacitor as a buffer will solve the problem
Explained it well enough
How did you wire them together? Did you splice them together or did you use connecters at the ends?
Do you have eletric start on your dirt bike? If so did you install it or did it come with it
Wow thanks I was looking to put a light on a 25 motor in a Suzuki rm125 frame thanks for that
Back the volumes intro 🤙🏻
I like your handlebars can you give me some information on what your risers are in the handlebars thanks
Hello great info but would it woke on a yx 140 i have a lighting stator installed
Def trying this out!
is that key on power or constant... does it shut off when you turn key off? Im going to have to see what my crf110 has ... it DOES have a little 3 prong connector, I have not traced it to see what it actually is.
Have a up dated link to the the voltage regulator? Or the voltage rating it’s putting out? The supplied eBay link not available now.. thanks!
That is the best diagram iv ever seen that’s ace man 😂
so if you do want a battery do the same thing but connecting to the battery and then battery to rectifier then rectifier to how ever many lights you want?
LOL LOL LOL😁 the same LED light bar as I have and my outdoor EL-WHEELCHAIR 😂😍🥳
so how would u hook up a rec if you don't have those 2 yellow wire ?
So it means that there are 2 voltage regulator in your bike or your just using same regulator for ignition?.
Is the rectifier something you added or relocation? And do you have to add one? Or can you skip that? And wire into existing wiring and leave it running as long as engine is on? Off when killed right?
@Nethter
5 жыл бұрын
Rectifier is an add on, I’m not using one and the light fades away at idle
Really helpful video
Best video even for 5 pin regulators I used this info on my 200cc 4 stroke Lifan
Great video now I know. Have you done any mods to the air breather? I just do not like that cheap foam crap it comes with.
Brilliant video
i slapped a 18 inch light bar on my klx 140L for over a year now and its been working out great for me , i previously bought a light bar kit on ebay for dirtbikes but the LED light burnt out on the 2nd day ,. so i kept the button,wiring , bracket assesmbly on and jus replaced the bar. it turns night into day i kid you not, i cant even drive near the main roads with out traffic flickering their high beams at me as if too say ITS TOO DAMN BRIGHT! i made my a bracket out of a old metal tv wallmount i had laying around and it fit perfectly
So the rectifier grounds its self through the chassis?
Quick question do all led bars have the same wires cause ive been looking no store shows what wires there are.
Brother ty so much I needed this 🙏
Could you run some turn signals as well as a headlight from that same rectifier?
Anyone know if you could do the same wiring setup as the video only on an xmotos 125??
HI , DOES ANYONE KNOW ,WHAT WILL BE THE REGULATOR KIT FOR A APOLLO RFZ 125 (CHINESE DIRT BIKE) , IN ORDER TO PUT THE LIGHT ,THANKS
My only question is where are those 2 yellow wires comming off of to be able to use those on the lights ...im kinda knew to bikes but I got every thing I need ...just wanting to know what are those yellow wires leading from .speciffically
I have a white and yellow wire, could that affect the way it works with the pink and yellow wires?
Great job
What if u wanna add a tail light turn signals and a horn how would u do that ? Or do u need a battery
Top notch shed life hack fella ! Ps the led flicker and the shutter speed are out of synchronization thats the double slit effect and quantum physics right before your eyes
Got my subscription. Thanks brother
So is a Rectifier needed or is that just to make it not flicker and get brighter as you throttle up? Is it possible to just hook up a light and switch?
@ollieroodhouse4558
Жыл бұрын
no
Do you have to use the rectifier?
How would you hook it up if there was no on and off switch involved?
I did exactly as you stated but my light doesn't turn on, can you help? I have a switch that has a light in it when it turns on but nothing.
Gonna put it on next week
Just asking so I only need a switch regulator and wires I have a light but didn’t know how to connect s
I only have a positive running off the magneto and another wire that I think is a ground, do I wire those the same as the two yellows on yours?
@vanlifefishing
4 жыл бұрын
SyberMan Jack kzread.info/dash/bejne/qpN3p6WrfKrYkaw.html
Hi mate I’ve just done this to my pit bike as I had a little light bar but it’s a 30w and the light comes on as the revs raise. So just wondering what watt and volt light you used. Cheers buddy
@adamsquires1775
Жыл бұрын
I’m having the same issue, did you find a solution?
Any links for a voltage regulator. The one u posted says it's no longer available. Thx for ur time
What do I do if I don’t have those extra wires? To be specific I have a 2013 crf80
How do I hook the taillight and headlight up to my bike if it does not have a pig tail? I have a key to start it but it is a Kickstart. Help!!!
Does this work on the Apollo RZF?
So can you skip the rectifier and the light switch and just run the light streight on the two unused yellow wires so it will always be on when the engine is running? Am I understanding this correctly the light will be weak on idle but will go brighter with engine revs without the rectifier.
@jeffreybones86
2 жыл бұрын
No because the 2 yellow wires are ac and you need the rectifier to convert that to dc or you will just blow your light out.
In case I only have one yellow wire. Coming from the stator, what then?
Good video! Thx
So what do you do when you only have one spare wire available?
and if I have a battery that I want to run in line so i can use my light without starting the bike? does the hot to the headlight just run to the battery first. Then a lead to the toggle then to the headlight?
@jodylarue2312
2 жыл бұрын
also wondering where to add the battery into this circuit
i did it exactly and it gets brighter as is revs up
@theaussieboysdownunder6901
5 жыл бұрын
Battery might be closer to the weak side of its life?
Thanks for the vid... I am trying to do an enduro conversion for my pit bike! This helps a lot
@rtfvox
6 жыл бұрын
KeliMan good man! Hope you are successful with it!
@Silentjustin06
5 жыл бұрын
@@rtfvox I've successfully installed a light on my bike already. The only issue i have is it being dim at idle and bright when throttle is on. Is there a way to fix it with a lower watt light or a compacitor. Everything i read online says its only possible with a battery or a ac current light setup
@Silentjustin06
5 жыл бұрын
@@rtfvox bro check my bike now. Got to my channel. I posted a video
@PolloConAdobo
5 жыл бұрын
I'm having the same issue with the dimming and throttle, but have a rectifier in place. Can it be due to the light being 36W, I notice these smaller bars are only 18W.
@dpyz4503
2 жыл бұрын
@@comox_valley_gsxr I have a 18w 6" led bar with a rectifier. I may sound dumb but will it not be low beam at idle and higher beam when the throttle is on? And will it flicker?:
hi,, does anyone know from where does the 2 yellow cables originally start from?? my dirt bike doesnt have any type of connection for lights. thankss
@motorbikeryda883
3 жыл бұрын
The 2 yellow wires come from your stator plate so if you haven’t got any you need to get a stator plate that’s made for lights
Where can I find that rectifier? Your link doesn't have it anymore
how could i add a brakelight & blinker on a ssr ? any input from anybody would be appreciated i already have the oem ssr headlight kit on
Hey man so I did the same thing but i just put the positive and negative wire into the harness it was bright for 2 secs then went very dim still light but not bright at all
Thanks very much really good video
How do you plug in more lights like signals tail light brake lights headlights turn signals horn how can I do all that without a battery how do you set yours up is it possible
This video was awesome thanks
This work with the Apollos?
Great vid, any way I could run a light and a horn without battery ?
@gjmoto7623
5 жыл бұрын
I meant could I not I could
wierd thing my bike is a 125 tdr pro you can find it on ebay but the frame looks identical even though mine is from 2011
I did this on my Apollo RFZ It comes stock with a 3 wire stator so I put in an upgraded 5 wire stator but anyway I tried using a GY6 rectifier and I couldn't get more than 3v out of it once it was hooked up so the light wouldn't work idk if it is the rectifier or the stator but if you have any pointers I'd take them.
@megis6969
2 жыл бұрын
Apollo rfz 125?
@joshsevens9611
2 жыл бұрын
@@megis6969 Yeah the 125
I did it and it worked flawless my brake levers have light switches in them so I added a brake light too
@rtfvox
6 жыл бұрын
Sam Lane glad it worked man! I want to add a brake light soon.
@samlane1721
6 жыл бұрын
AverageWhiteBoi there is also a blinker kit you can get but it's a little more complicated to put in
@brucewright6784
5 жыл бұрын
How did you wire your brake light switch?
Is that the manual or semi auto ssr 125cc?
Hi can i weld on my pit bikes frame where do i look for the batry its my firts time dealing with bikes now nothing
Sick ass intro!
I have a green and a white wire is this possible for me to wire a led bar
Is there any other one for sale that will work for a ssr? If so reply with the link
Only get 3 v DC at idle have 7 v AC at idle The most I get is 11v DC from the regulator when on the gas. Any suggestions?
Will this work on my SSR 110 my wires are pink and yellow, thanks!
Would it be possible run a tail light too?
Followed these steps but with different headlights(higher watts). I get headlights lit up when I Rev the bike. Anyone knows why? Can it be the wattage of the lights?
Me puedes decir cuales son los repuestos para intalar una luz
What parts will I need specifically. The ebay links are outdated
Hey i have a question why does the light flicker when riding
@jonssi1374
4 жыл бұрын
because you engine gives the elecrtocity to the ligh if you idle or have low rpm it may flicker
I need some help I connect the wires as you explained but the lights aren’t turning on
I hooked it up exactly like you did my lights turn on they flicker with the motor and then when I give it throttle the lights get brighter and burnout why please help
Do you need a switch if you just want to run the lights everytime the bike is running?
@rtfvox
3 жыл бұрын
I wouldn't think so.
08:26 whats that smoke from ur exhaust bandage?
My sons light won't work with a rectifier but when I wire it up with out rectifier it works but then shuts off. His bike is a 2022 ssr110. It has a pink and a yellow wire not being used but then also has a connector you can plug into with a green and a black and yellow wire. Any help or tips would be great.
@BillP5150
2 ай бұрын
Did you ever get this to work?
Is there any way to run both lights from the kit? the kit comes with 2 18w lights can those both be ran like this or do you need a battery for that?
@rtfvox
6 жыл бұрын
William Montano you could try to splice them together, but I don't think there would be enough power to run both 18w lights.
@dpyz4503
2 жыл бұрын
Thought about how to do this so I can light up the trail like Christmas. But I mean it would hurt to try🤷😂
will a 2002 xr50 have the wires?
So can you send the link to where you got the regulator and the switch
@Shepherdstudio1
4 жыл бұрын
i found it