I did not think you were going to cut that web design from a solid piece. I thought it was round stock and you cut, bent, and welded it. The talent you show with a torch is awesome. Thanks for such a detailed video. I wish someone would donate a steel building and a couple of go pros to you. It would benefit all of us fans of yours. Great job dude.

I typically loath headache racks. You made a beautiful one. GREAT JOB!

awesome work Allen I like how you do it with regular tools us average guys have. You have great talent

It's called "use what tools you have and work harder"....great job friend!

I really like the dual tubing around the frame. Making the spider web from a flat sheet was awesome. And the added detail to the side gussets really makes it stand out. I am inspired now to go make one for my Ram. Thanks

That rack is sick! This one has inspired me.

You sir are not just a craftsman, you are an artist! I’ve never seen a more beautiful headache rack.

Love the "high-tech" look done with some "low-tech" tools.. True craftsman. Keep up the good work.

@josevilla8179

7 жыл бұрын

That's why I got me a cnc

holy crap...your a hell of a craftsman.....nice job...I like that you said you goofed up...showed us...then showed your update...

A labor of love my friend! Looks great as does everything you do always does! Keep up the awesome work friend!

great work Allen, keep the videos coming

nice to see other versatile & talented person like myself, nice tidy workmanship. you got there in the end.

That's a sweet build mate. Cheers.

You're a talented fella ................Very nice work

You have a creative talent and a mechanical talent. Put the 2 together and you have fabricated some amazing things! As always, I enjoy watching you create! It also helps me.

Very good work. Great job.

thanks for sharing, looks awesome

That is freaking awesome!!! Great job bruh!

Nice project, looks great on the truck.

you are talented bud. well done. your videos are awesome!!!

awesome work ...you really need a small plasma table...you would love it

I recently became a subriber-great videos,and excellent work!! I've been a high pressure pipe welder for 35+years,You are a true artist,and well thought out fabricator.Keep 'em coming,and GOD BLESS!!

great work man!

Cool brother. Great work ! I have also done a lot of welding outside.

excellent work

Bloody hell you do some lovely work mate , it looks as wet there as it usually is here in the uk🇬🇧👍🏻🤣🤣

AWESOME job 👍👍👍

Nice rack! That said... You work around some weather issues, damn. Great talent, your assistant couldn't even help it was so crowded... Great vid, Great channel.

That is sharp, my friend!

now thats one classy lookin rack bro allen awesome design 👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@Allensweldingwoodworking

7 жыл бұрын

thanks!!

Great job 👍👌👍

That looks awesome

Wow... That is Nice... Great Job... Great Videos...

Wow you are a great fabricator thank you for sharing this video God Bless....

@Allensweldingwoodworking

7 жыл бұрын

thanks! God bless you as well

Nice rack. You do better with that torch than I do with my plasma cutter.

That is great work

Nice job thanks showing us

Wow , bet others will want custom bed attachments to protect there Windows. Good job , if you make more patterns could be of use to cut them out before welding them in. YUPP I love watching a craftsman at work. Thank you and God bless you and the family .

That's badass!

Fantastic job there mate and great design

@Allensweldingwoodworking

6 жыл бұрын

+mtm 4x4 thanks!

Very nice!

great job

Wow. You are a craftsman.

@Allensweldingwoodworking

7 жыл бұрын

thanks!!!

Very nice!!!!

Lotta, work as most quality fab work is. Looks good.

Allen, good tip on the jigsaw - that will come in handy

@Allensweldingwoodworking

7 жыл бұрын

yea I've done some surprising things with a jig saw

looks good..

very talented and creative here man...nice

Bad Ass Bro!!.. Nice as always!

@Allensweldingwoodworking

7 жыл бұрын

thanks!!

If you had a powerplasma cutter there would be no limit to your work. Fantastic job man.

Very nice Bro

Awesome!!!👊💥😁

Dambbb...nice job...

That thing is bad ass

Allen, love the work - but you seriously need to make yourself a CNC plasma table!!

That is sweet

I love your work. A Powerplasma cutter would probably cut your fabrication time down.

Allen the track cutter!

hey your videos are the best thanks.can you tell me what the tool I saw you use to mark angle cuts on pipe. looked like it held soap stone some kind of protractor

Sharpppppp!!!

Everyone keeps telling him to get a plasma cutter. The torch is working just fine. Haha. Yea its nice to have it, but then you have to have an air compressor that can keep up. It adds up. Especially when you buy something decent that you can count on to last.

@jasonkendall9811

5 жыл бұрын

lincoln tomahawk

Nice

From another fabricator, you do great work! Just need to upload in at least 480p.

@Allensweldingwoodworking

7 жыл бұрын

thanks! I really do need to upgrade my video making

@GlassByThaddeus

7 жыл бұрын

You reall do beautiful work. Keep it up! I say get a gopro hero 4 and a handful of the cheap UV lens filters in case you hit it with the grinder

Wish the video quality was a bit better but that looks dope as hell! Awesome video

very nice! curious what would you charge for that?

badass work. I'm going to make me one but . A dale Jr one

@Allensweldingwoodworking

7 жыл бұрын

thanks! that would look good too!

@Z71Ranger

6 жыл бұрын

Dale Jr wife made him Quit... So I Quit Dale Jr....

Really great fab work. How many total hour do u have in that ptoject? Sometimes it's less wear on the body to just put those hours into overtime and have a shop laser cut a design u make on computer. Then weld up the tubing. Just an idea from a aircraft structures guy.

Your good

hey mate, love your work. . I have a question which i think you have probably been asked a thousand times before. can you tell my why you chose oxy acetylene instead of plasma cutting? do you have more control? i haven't used either before and I was thinking about one of these processes as my next purchase as my welding improves.

Awsome rack. But I get anciety to see you welding with no gloves.

I liked what you did there. I'm not sure how you attached the rack and it appears the center brake light opening may be too high to be seen from the rear?

You are the shit, i watch all your videos

I noticed you use your torch a lot for cutting designs in sheet metal. Have you tried using a powerplasma cutter? Any thoughts on the pros and cons of either method?

What did you use to hold the plate in the center when you pushed it in

Allen. Crisco an an acid brush for the jigsaw cuts. This coming from me with a plasmacam table and PM 45 and 65 !

@Allensweldingwoodworking

7 жыл бұрын

thanks for the tip!!

@glenndavis2762

7 жыл бұрын

yup - 45 here too - the best! I can cut 1" thick with my 45 - amazing

What degree angle cuts were used for the top corner pieces?

That was some amazing work Allen, mad torch skills. I'm a novice welder, I was told you couldn't weld outside with a mig with gas. Now I know on a very windy day it would blow you gas away, is it possible to weld on a calm day outside with gas? Or should you always use flux core outside? Thanks.

@djdanzy

2 жыл бұрын

Yes sir calm day with mig gas. I weld gal tube out of my shed on calm days.

Quality.

You need to look after your Lungs young Fella God only gave you one set.SAFETY, SAFETY all ways comes first.SAFETY, SAFETY

where you located Allen I need a rack for my dodge

Superrrr

You did some nice work but I would like to get the measurements for the length of tubing that is for the framing of it

@Allensweldingwoodworking

3 жыл бұрын

You have to measure it to your truck

Did you clear coat it ?

Beautiful work... the hard way, but awesome none the less. If anyone ever needed a plasma-cam or water cutter it's you! Next one, why don't you lay it out and take it to a bigger shop to be cut on a laser table? Save you loads of work and time!

@Allensweldingwoodworking

7 жыл бұрын

thanks! a plasma table be a lot easier but some stuff I just like to see if I can do it by hand

love your vids a true craftsman how long has that ryobi been working? i always thought they were crap had a couple over the years and they burn up in a couple months of light use get hot and just die maybe i'll give it another try..... you are skilled and seem like a good person that's the main reason i watch your vids thanks

@Allensweldingwoodworking

7 жыл бұрын

I like the ryobi grinders, the brushes burn up quick sometimes but just take the screw out of the side and its replaceable. for the price tho, they are pretty good

@MARTIALCOMBATIVES

7 жыл бұрын

thanks maybe i'll try one your cutting skills are top notch hope you have a great xmas love seeing all your animals and the vids

Excellent build, but no paint or anything to protect it from the elements?

@Allensweldingwoodworking

4 жыл бұрын

No, I wanted it to rust, it's on a Toyota now

@haulem

4 жыл бұрын

@@Allensweldingwoodworking OK

Hell I thought the webb was going to be made of logging chain?

its nice work the third brake light should have been lower otherwise great job

@Allensweldingwoodworking

7 жыл бұрын

thanks!

GREAT JOB ALLEN!! what size steel plate you used..?

@Allensweldingwoodworking

4 жыл бұрын

Thanks, its 11 gauge plate and 2"/1" tubing

@alfrejaime

4 жыл бұрын

good.,THANKS FOR ANSWERING..!!

damn.. if you had plasma cutter....

🤘👌👍

Looks great, but if you ever have to replace your back glass, it will be a pain in the ass

@Allensweldingwoodworking

3 жыл бұрын

Subaru STi just unbolt it’s from truck, that rack has been on 3 trucks now

i know this video is sorta older, but do you have good air now???

@Allensweldingwoodworking

6 жыл бұрын

Erik Doering good air? What do you mean?

Grind one of your files down to fit your sawzall

kind of finish & maybe lights?

@Allensweldingwoodworking

7 жыл бұрын

going to have it powder coated, probably won't add lights

Nice job !!! How much if u sell ?

@Allensweldingwoodworking

7 жыл бұрын

if I sold it..probably $300-$350

How much for a head ache rack for a 2006 Chevy Dually?

What size square tubing you using? 2×4 or 2×3

@Allensweldingwoodworking

3 жыл бұрын

2”/1”

@dineryderz3nhorseracing374

3 жыл бұрын

@@Allensweldingwoodworking thank you

This channel would be awesome if you had a little bit better of a camera!

Cnc ?