HARMONIC BALANCER REMOVER & INSTALLER SET (WILMAR W8O711)
This is just an extremely quick demo of the kit I used to remove my crankshaft vibration damper. Its a very solid tool and worth the money in my opinion
Жүктеу.....
Пікірлер: 42
@MrPhila44 жыл бұрын
The man with the plan. Thank you for taking time to make this video, another great video as usual.
@davidgillettuk96384 жыл бұрын
At least they delivered what you actually ordered 😀
@barricadegarage5361
4 жыл бұрын
Hahaha
@davidmichaels63043 жыл бұрын
You did a good job of demonstrating the use of the tool and how it functions on the vehicle.
@usafyuros61264 жыл бұрын
I’m just gonna take my Jeep to you, keep up the awesome content
@darinrichards79002 жыл бұрын
Thank you for taking the time to make this video. I'm a novice and it was just what I needed.
@garthsullivan3093 Жыл бұрын
Man, this was a perfect & to the point instructional. Great job.
@johnathangreay9878 ай бұрын
Hey playa. Thanks for the recommendation. It got two of my family's cars back on the road. Thanks again man. Respect.
@newmexicooffroadvideoslock88144 жыл бұрын
Thank you for that video I hope you do more videos on the tools that we need for the ZJ
@djmariomar4 жыл бұрын
thanks for the video - I bought this kit and the instruction manual was a mess.. the page number and language was all mixed up and it got me into a stressful nightmare.. the manual called to use the big round peace with 4 holes to be used for re-installation, but you just clarified the simpler way of installing them back.. thanks again!
@hokiexterra Жыл бұрын
Thanks!! Needed this for my 351 W. It has a deep well before you get to the flange.
@AliceMudGarden194 жыл бұрын
I like all your videos man I've been watching you for a while. I have 4.0 ZJ so not always the same but I've used your videos many times. Still worth watching even though it doesn't pertain to my ZJ. Thanks! 👍
@barricadegarage5361
4 жыл бұрын
Thanks for the support
@thomashaskins46544 жыл бұрын
literally doing this tonight and had no clue how to use the one i rented and niether did the guy at the auto store lol. thanks for the vid, looks real easy to use!
@1970chevelle3964 жыл бұрын
I need to buy one of those . Looks a lot better than the one I have.
@dq714324 күн бұрын
Good user video, comprehensive kit.
@EATSLEEPFARM2 жыл бұрын
Best video I’ve seen on this. Straight to the point👍 Good stuff bro
@DavidLee-wx6dg4 жыл бұрын
I was camping at the lake at the top of a canyon. When I started to drive the next morning, the harmonic balancer fell off of my ZJ 4.0. I coasted down the canyon and then drove, coasted to O’ Reilly’s with no water pump, and changed it in the parking lot, but I wish I had a video then.
@mikev63799 ай бұрын
Thank you this is a great video it definitely helped me!!
@philshevlin Жыл бұрын
Great video. This puller is the same as the Harbor Freight (Maddox brand). You’d probably increase views if you included that in your description. Thanks!
@herdfreak2 Жыл бұрын
Great video, thank you!
@christian_urocar3 жыл бұрын
Thanks nice video , good camera angles
@mbdulka Жыл бұрын
Thanks for the video, helpful!
@briangarza9045 Жыл бұрын
Great video.
@tybrownsr.44667 ай бұрын
Thank you!
@scarface-393 жыл бұрын
Thanks the video was very helpful 👍🇺🇸
@rogadsden79868 ай бұрын
Appreciate ya 💪🏾
@jackpistone80153 жыл бұрын
Lit video quick and informative
@bryannorton75353 жыл бұрын
Thanks man, helped me out.
@poopacapinyapants17978 ай бұрын
All I need to know is what size are the bolt holes for a Summit 2501, or Powerbond PB1117SS. I can't get any info from either company, and so far the hardware stores have been of no help.
@rusanyukaare1799 күн бұрын
Can you use this to pull out rear wheel hub/bearing?
@MrBjack-jc9yy4 жыл бұрын
When the fuck was this video when i needed..every body else is like watch me and thats how you do it,thanks for watching
@johnlong7752 жыл бұрын
I recently purchased a 69 Chevelle. I had two of the pulley bolts break off inside the harmonic balancer. Who ever built the 427 crate motor must have not torked the bolts to specs and it caused these bolts to break. Needless to say I had a scream case of the redass but preceded to extract what was left of the bolt in balancer. With no luck I ordered a new harmonic balancer from summit racing. The problem I have is that the three bolts that you must use to pull the balancer need to go in the holes that the bolts are broken off in. So my only chance is to place helicoils in the same holes that the bolts are seized in and hope that the puller kit pulls the old harmonic balancer off. Any tips or suggestions are welcomed. Thanks
@magcv922 ай бұрын
Why you replace the harmonic balancer?
@19spydersnake4 жыл бұрын
Any reason you replaced it? Mine has visual wobble but runs fine. Should i replace mine too?
@barricadegarage5361
4 жыл бұрын
Check out the video I did on why I replaced it kzread.info/dash/bejne/m3WFtNmrkbDOeqw.html
@harrison4ever1254 жыл бұрын
I'm about to do this today on my vortec 350. Are they not any cheaper at harbor frieght???
@OldTimerAutoRepair2 жыл бұрын
keep note, this kit will not work with a 1 piece pully/ballancer that the old ford trucks use 1999-2004.
Пікірлер: 42
The man with the plan. Thank you for taking time to make this video, another great video as usual.
At least they delivered what you actually ordered 😀
@barricadegarage5361
4 жыл бұрын
Hahaha
You did a good job of demonstrating the use of the tool and how it functions on the vehicle.
I’m just gonna take my Jeep to you, keep up the awesome content
Thank you for taking the time to make this video. I'm a novice and it was just what I needed.
Man, this was a perfect & to the point instructional. Great job.
Hey playa. Thanks for the recommendation. It got two of my family's cars back on the road. Thanks again man. Respect.
Thank you for that video I hope you do more videos on the tools that we need for the ZJ
thanks for the video - I bought this kit and the instruction manual was a mess.. the page number and language was all mixed up and it got me into a stressful nightmare.. the manual called to use the big round peace with 4 holes to be used for re-installation, but you just clarified the simpler way of installing them back.. thanks again!
Thanks!! Needed this for my 351 W. It has a deep well before you get to the flange.
I like all your videos man I've been watching you for a while. I have 4.0 ZJ so not always the same but I've used your videos many times. Still worth watching even though it doesn't pertain to my ZJ. Thanks! 👍
@barricadegarage5361
4 жыл бұрын
Thanks for the support
literally doing this tonight and had no clue how to use the one i rented and niether did the guy at the auto store lol. thanks for the vid, looks real easy to use!
I need to buy one of those . Looks a lot better than the one I have.
Good user video, comprehensive kit.
Best video I’ve seen on this. Straight to the point👍 Good stuff bro
I was camping at the lake at the top of a canyon. When I started to drive the next morning, the harmonic balancer fell off of my ZJ 4.0. I coasted down the canyon and then drove, coasted to O’ Reilly’s with no water pump, and changed it in the parking lot, but I wish I had a video then.
Thank you this is a great video it definitely helped me!!
Great video. This puller is the same as the Harbor Freight (Maddox brand). You’d probably increase views if you included that in your description. Thanks!
Great video, thank you!
Thanks nice video , good camera angles
Thanks for the video, helpful!
Great video.
Thank you!
Thanks the video was very helpful 👍🇺🇸
Appreciate ya 💪🏾
Lit video quick and informative
Thanks man, helped me out.
All I need to know is what size are the bolt holes for a Summit 2501, or Powerbond PB1117SS. I can't get any info from either company, and so far the hardware stores have been of no help.
Can you use this to pull out rear wheel hub/bearing?
When the fuck was this video when i needed..every body else is like watch me and thats how you do it,thanks for watching
I recently purchased a 69 Chevelle. I had two of the pulley bolts break off inside the harmonic balancer. Who ever built the 427 crate motor must have not torked the bolts to specs and it caused these bolts to break. Needless to say I had a scream case of the redass but preceded to extract what was left of the bolt in balancer. With no luck I ordered a new harmonic balancer from summit racing. The problem I have is that the three bolts that you must use to pull the balancer need to go in the holes that the bolts are broken off in. So my only chance is to place helicoils in the same holes that the bolts are seized in and hope that the puller kit pulls the old harmonic balancer off. Any tips or suggestions are welcomed. Thanks
Why you replace the harmonic balancer?
Any reason you replaced it? Mine has visual wobble but runs fine. Should i replace mine too?
@barricadegarage5361
4 жыл бұрын
Check out the video I did on why I replaced it kzread.info/dash/bejne/m3WFtNmrkbDOeqw.html
I'm about to do this today on my vortec 350. Are they not any cheaper at harbor frieght???
keep note, this kit will not work with a 1 piece pully/ballancer that the old ford trucks use 1999-2004.
Wilmar (W89711) he put a zero instead of a 9
Well now I know how I messed up 🤦♂️
Pull-e 🤓
Bruh....