Harley-Davidson Problem Codes | What Do They Mean?! | Doc Harley
Автокөліктер мен көлік құралдары
Today, Doc discusses the complexities involved when chasing problem codes on your Harley Davidson motorcycle.
#harleydavidson #problemcodes #motorcycles
Пікірлер: 141
Amen doctor, I spent 43 years in the automotive after market parts business, in the last twenty years everyone wanted to know what codes meant I would have to explain that there may be more than one problem causing that code to appear. Keep up the good work.🤓
Thanks once again Doc!!!!! Not long ago while we were riding in the mountains my wife's 2018 Tri Glide had a dash light come on, so we pulled over and luckily we had cell service and after a Google search was able to learn how to see/pull the code to make sure we could make it home... luck was with us and we took the bike in to our dealer and it had a bad O2 sensor. Smart bike.... ;-)
Everything you said is 100% true. As the saying goes "well, it's not that simple"
Yes doc, I fully agree. In my practice (Ducati bikes) we have had various problems with broken cables or simple corrosion at plugs or mechanical connections. Sometimes hard to find. One thing is for sure, a diagnosic, even with a code is not always possible. Regards from Austria.
@LowCountryHarleyDavidson
2 жыл бұрын
Thanks for watching and your important info....Doc
Yes I agree a process in deed! I have a 21 Harley 48 and threw a B1211- fuel level sender shorted high side The dealership already replaced the pump and are going to replace the harness but I told them it's probably the resistor based of the wiring diagram because the pump still works when fuel gets to low than light comes on
Thank God for guys like you, if it's electrical I am more than happy to let my Harley tech handle it. That way I don't have to pull out the hair I have left.
Thanks for the information Doc.
Nice one Doc. There is a lot to it. and depending on the generation of system, the methods of troubleshooting can get all sorts of wild and wonderful. I just spent a ridiculous amount of time chasing down a cam sensor code on my new to me 2000 electra glide. Falsely assuming that the "professional shop" had done the job right caused me to chase all sorts of dead ends. In my frustration I had forgotten the basics: stop. assume nothing. approach it methodically. build an order of operations. The root cause? when updating the engine to use hydraulic cam chain tensioners, the professionals had used the cam sprocket that came with the kit and installed it without ever reading the instructions in, or description of, the OEM kit; which clearly states that an original style sprocket must be used and is not included. Nor had they even stopped to wonder why the original sprocket was so radically different than the kit sprocket. That the bike ran at all in that state is a mystery I havent solved yet.
@LowCountryHarleyDavidson
2 жыл бұрын
Thanks for Sharing...Doc
Great vid, Doc. Thanx
Good information, definitely complicated
Great answer , one thing I learned on new electronics, mine was Forklifts, but same type - is 1 wire might do 2 to 3 things , atleast on the Newer Hyster forklift , one wire my do horn , and the same wire my also do 4 way flashers . At first I was saying it was crazy , but the Voltage , and lack there of can change how a switch works , learned that in Shop class in Jr High. Using a Orthoscope seeing how Voltage works in Waves shows how it works. Confusing, but how they work . I left forklift industry about almost 10 years ago , they seemed to be ahead of Auto industry on changing DC Voltage to AC , where a 36 volt DC battery would last 8 hour shift , changing the system to work on AC and same battery would last over 3 shifts of usage. Wave's of power will change the World if used Properly !!!
@LowCountryHarleyDavidson
2 жыл бұрын
Thanks for sharing. Buell must have worked on a Fork lift.....Doc
If you could give me some advise I would appreciate it. I have a 2005 FLSTFI with the fuel light on and showing a b1004 code and my gas gauge doesn’t work. . Today it threw a p1004 code. Could they be related? Maybe a bad relay cause problem with the fuel gauge? Thank you.
I hope they listen to you on this one, everything has changed so much over the years, look how much more wire is in a harness today an what all it goes to, Great advice Doc, HD should make a catalog of just your videos, call it Docs Common Sense ,have a good day Doc
@LowCountryHarleyDavidson
2 жыл бұрын
I laughed so much on this comment. I am sure the person at the Factory that watches my videos for correct content (as they do) will take your idea to the board....Doc
@genebulford8636
2 жыл бұрын
I'm glad you Enjoyed the comment Doc, but the bottom line there is no doubt in my mind you have had to have helped a lot more riders than you probly realize, thanks Doc an enjoy the weekend that's coming up
Hey Doc ! When I was changing my spark plug on my street 750, I saw that there was rust on the piston head, Why is it so ? Any tech tip to get rid of rust ?
Hey Doc, does my 2019 FLHR have the light for emissions?
Thanks Doc!
Thank you Doc
You Sir, are heaven sent.
@LowCountryHarleyDavidson
2 жыл бұрын
Ha Ha...Just trying my best.....Doc
So you basically have to be a master technician to figure out what's really wrong with your bike.
@LowCountryHarleyDavidson
8 ай бұрын
It helps if you know one…..Doc
I deal with that everyday. Being a Automotive Technician. They go to a part store & get the codes read. Bring a part. I say. Do you want me to install your part, or fix your problem
What codes do you get with 80s 90s EVO? ASKING FOR A FRIEND!
Thanks sir
Roger - that , Doc!
Yeah I got a 2014 limited I’ve always had a pan head Or shovel head I guess I’m just old school I hat my 2014 but I love the ride on 2014
@LowCountryHarleyDavidson
2 жыл бұрын
I like your Old School heritage...Doc
Tell them they can fix it by scheduling a service appointment. My son is a Ford Tech so I get it.
better question is, What is the going rate at LCHD to have your bike checked for codes???
@dwheeler016
2 жыл бұрын
$1,000 an hour since Harley has to fly out the little guy and send him up the tailpipe to check the special nut.
Recently my softail Fatboy 2008 comes a bus err and also one of my turn signal does not work right side the error codes shows are u1300 I can't fix this how can I fix this
@LowCountryHarleyDavidson
2 жыл бұрын
Best answer is take it to your local Harley-Davidson dealer. The tech their can follow a flow chart to find the Can Bus wire that is not communicating. It could even be the circuits in the switch...Doc
Thanks doc. I got a good one for you I . Have a 2020 street glide special I installed a power vision. Ever since. My key fob won’t work I can start the bike any time with the key no where near me I called Dino jet and there telling me. It’s not the pv any ideas
@LowCountryHarleyDavidson
2 жыл бұрын
If you have the monitor....disconnect it and report back....Doc
Thank you Doc, I’m so furious right now, I bought new 23’ RG and ordered stage 1 and new bars for it, parts came in and dropped off bike, days later (late yesterday) went and picked it up & 40 miles later, west to take ride to dinner and 3 lights came on and codes are P1100c and C1032c, I have suspicions that the dealership cleared codes to get me to pick up the bike knowing the lights would come on after I left, can that be possible to ride the bike until Tuesday (dealerships closed) with those specific codes showing? Any light shed from you would be great.
@LowCountryHarleyDavidson
11 ай бұрын
It is possible the codes were created when connection were separated during the handlebar exchange. As long as the bike is running well. You will be fine. They are Historic codes. The concern is when the light stays on while riding. Please do not assume the dealer and techs are out to do you harm. Mistakes can be made. We…I am human…..Doc
@babybugspaw7085
11 ай бұрын
@@LowCountryHarleyDavidson Thanks Doc! TC
P1511c, and P2135c. 2021 Road glide with just 2K miles on it. This is unacceptable. Had to limp the damn thing home. How embarrassing. Last Harley I ever buy. Voltage regulator went out at 4K miles on my 2020 softail standard I had prior.
Doc, I replaced a bad ignition switch and now my speedo is completely off but red key light is on... please help. Thanks 👍 (2005 1200xl, w/carburetor)
@LowCountryHarleyDavidson
2 жыл бұрын
It does not sound like the wires are correctly connected or you have a bad ground wire....Doc
@FreeAdvice4All
2 жыл бұрын
@@LowCountryHarleyDavidson Disconnected and re-checked all connections and fuses. Still no speedo, no blinkers or brake lights. Running lights (head/directional/tail all on. There must be a fuse I'm missing or this is a security lock out? Security fob double click blinks lights though so I know that works. Odometer only comes on when I press reset, but won't stay on after bike starts and won't go into diagnostic mode. I'm stumped
This isn't necessarily diagnostic code-related, but can you do a video on Low Rider S handlebar death wobble and shift linkage loosening where it moves back and forth behind the rear cylinder after a few hundred or a few thousand miles?
@LowCountryHarleyDavidson
2 жыл бұрын
The Neck bearing and shifter is supposed to be checked at every Service. If you have changed your handlbars and ride with out both hands on the bars, I can't help you....Doc
how doi replace my tag lights on a 2020 softail standard
@LowCountryHarleyDavidson
4 ай бұрын
Remove 2 screws from behind, use a small screwdriver to remove the clear lens ( provided slots) remove bulbs.
Great job Doc, I'm a licensed automotive, marine mechanic and of course play with bikes.. but I know my limits... even after 44 years wrenching.. I literally could of been rich just answering those questions or the client puts the phone near the noise.. absolutely hilarious.. I so have a question if you could answer.. I have a 05 fat boy CVO with 18,000 kilometers on it.. it drives me nuts why my machine seems to idle to high after warm up. It's always idling around 1000. Now that's what the tach reads.. haven't verified with timing gun.. but I really loved that classic lower Harley shuffle that the old carbs did, you lnow the classic of timing of Harleys.. I've verified no vacuum leaks, never touched timing or mods on this prestine factory screaming eagle set up.. Any suggestions or theories?? Thank you for your time.. Pete from Canada
@LowCountryHarleyDavidson
2 жыл бұрын
Fuel injection changed the way Harleys sound at idle. You would think with all the sensors and mapping they could recreate the awesome shovel idle. There are reasons for the 1000 rpm idle. It take a lot of juice to run fuel injection. If you notice all Harleys with FI when started go to 1350 to 1450 rpm. thats to help the rotor/stator to send as much voltage to the battery after the starter took so much. at Idle the charging system in 05 barely keeps the battery up above 12.8 with all the lights adn FI system running. The bike's oil pump supplies oil and returns oil as fast as it turns. So if the idle was set at 750 lopping the motor would be starving for oil. The best way to get the sound you want is to research cams. Some manufactures can play with cam timing that comes pretty close to sounding old school......Doc
@petehalasz7547
2 жыл бұрын
@@LowCountryHarleyDavidson thank you so much for your quick response Doc... I do agree with the very hard and struggling start.. it's a shame that after warm up and full batt it wouldn't drop.. what kind of cam could create a lumpy idle without bad performance.. especially off the line.. I'm no hot rodder just an old man that loves great idles and sound.. 👍.. thanks for your time.. keep up the great work...
I was getting a constant red security light and intermittent check engine light while riding down the road. When the HD tech pulled up the codes there were multiple ones. Come to find out it was all caused by a defective brake light switch.
@kevintaylor8234
2 жыл бұрын
My engine light comes on going down the road goes on and off but runs no different
I've been in the Toyota parts dept for 34 years and get the same things, customer comes in and says I have a P0140 code, What is it? sometimes I want to say I'll sell you everything related to it...and still not guarantee to fix it
@LowCountryHarleyDavidson
2 жыл бұрын
Thank you for watching and your comment....Doc
Too much technology for our own good!!! I know "we must embrace technology". Ok, so where has that brought us to. Bring back the old days of carbs and cables. No need to rely on all theses computers and sensors and chips and other countries to make them. Just my 2 cents. Love the videos and look forward to them every week
@LowCountryHarleyDavidson
2 жыл бұрын
Thanks for watching and sharing. In my opinion, The riders (owners) of today have not been exposed to How a Motor, Carb, Trans works so we have this tech so they too can enjoy what we love....Doc
Hey Doc if I replaced my ecm on a 2012 sportster 48 do I need to program it
@LowCountryHarleyDavidson
26 күн бұрын
Brand new ECM come blank. If you bought on EBay it may need to be married to the original BCM so they can communicate…..Doc
@kevinsehpin1361
26 күн бұрын
@@LowCountryHarleyDavidson bro please help me out with my bike I have a sportster 2012 the front injector is not spraying fuel.. even I try to switch the injector the one ant the front still no fuel come out..
@kevinsehpin1361
26 күн бұрын
@@LowCountryHarleyDavidson thank you for your response
What does BUS ER mean. Got an 08 ultra SE3 snd she's running funny. Like hit n miss on rear cylinder
@LowCountryHarleyDavidson
7 ай бұрын
The communication Can Bus wires have been compromised! Your bike can not communicate to all the sensors. Either a wire is grounded or a power wire is putting 12 volts where only 5 belong. …Doc
@usmcdoc2512
7 ай бұрын
@@LowCountryHarleyDavidson thank you sir for responding!!! I'll start checking continuity at the bars and work my way back. I figured it might be the fuel injection wires. Was getting ready to lift the tank. 🇺🇲I appreciate ya
Doc, Here’s one for you, I have a 2019 low rider, My intermittent issue is: it only has happened to me about 3 times last year, I go for a ride shut the bike off for a few minutes, go to restart the bike cranks extremely slow, then the clock loses it time and starts flashing 12:00 , I reset the clock and go on my way, no more issues, I’ve researched this on the internet and have seen many people have this issue, other people have brought there bike to harley, but does not have an answer for?? There are no codes being set off, I know intermittent issues like these are like looking for a needle in a hay stack, but being that this issue seems to be becoming more common, any suggestions?? Have you had this come up? Thank you Dan
@bostjanplut
2 жыл бұрын
Look at the channel Revelator Alf. Usually is low battery. Need a new one, has to fill full even a new one before 1st use. Hope it helps.
@bmwdan3445
2 жыл бұрын
@@bostjanplut funny you say that, I did just check his channel earlier, he did update his issue and said he replaced the battery and even tho the first start he had the same issue, he said he charged the new battery and all seems good since. I did send him a comment and asked if still is all good now thats its been a few months, no reply yet, hopping thats all it was.
Ha Doc what year of bike would have no electronic on it ? ( more modern bike i am asking about think buying a use one ) Thanks
@LowCountryHarleyDavidson
2 жыл бұрын
Pre Fuel Injection...Doc
@johns9993
2 жыл бұрын
@@LowCountryHarleyDavidson OK thanks would like to get away from all the computer controls and the least amount of wires !
96 harley davidson ultra classic Electra glide was doing something really weird. A engine light came on but went off just as quickly. Then I would get the engine light on start each time I rode but it would go off. It wasn't a solid code and I was never able to get the code. My fuel mileage went bad and sometimes I couldn't even get it out of the drive before it died. It would die at stop signs and red lights. I looked up the symptoms and it would come back as the magnetti marelli fuel injection system that is on the bike. One weekend recently, I went on a 200 mile run on the old girl. She ran okay for the first 170 miles but the last 30 miles, she would kick off the cruise control with every bump on the highway and she just wasn't running good. When I got her home, I looked her over and I shut her off. The very next time I was going to ride her, I noticed the ammeter showing 10 volts and would not go any higher. I replaced the alternator earlier this year and it was working fine as far as I could tell until I took that 200 mile run. This whole time I'm thinking I'm gonna have to replace the magnetti marelli fuel injection with a delphi or a carburetor along with replacing my alternator. I decided to take it to a shop and have the alternator replaced. The shop did a fantastic job and were really fast and affordable to boot! Lo and behold, the new alternator alleviated all of the problems I was having with the fuel system. To date, I have had no problem with how she is running. I replaced the alternator myself the first time and I must have gotten some of the parts wrong. The stator must not have been rated 45 amps or the rotor rotor itself may have been the problem. The rotor taken off the first time had all of the magnets grouped together on one side of the rotor and the stator was burnt. The voltage regulator was also bad the first time. This second time it went out on me, exactly the same thing was found. All the magnets on the rotor I replaced had grouped to one side. The high temperature glue had failed. The stator was burnt and the voltage regulator was out. The guy who did the repair this time said it was a 45 amp alternator and the rotor was a sealed rotor. My fuel mileage is back up to 45 mpg where it had slipped to 41 to 39 with the old alternator and that was right after I installed it! It is much better now. I am elated I don't have to replace the fuel injection system. Some people have replaced their fuel injection to carburetor but at 2000 dollars to redo it, I was not looking forward to the cost. I could have done the delphi for a lot less but still the hassle of replacing it was not appealing in the slightest. We are coming to the end of the riding season but I'm gonna ride as long as I can before I have to cover her up for the season. I love my evo. She's been mine for three years and this is the first time I've had any trouble with her. This bike has been to Daytona week before. Apparently the old boy that owned her had some issues with the alternator on that trip. I am hoping we've got that issue solved permanently. I plan on riding her until I can't ride any more.
@LowCountryHarleyDavidson
9 ай бұрын
Thank you for sharing an epic event with a happy ending. Your shop went the right direction. The original charging system was weak. Many don’t understand EFI depends on Battery and Charging System👍…..Doc
bike just turned 1 year old P0264 pops up and registration is now expired. FML and Fuck Harley bike has been nothing but fun and issues since I got it.
Doc your good and we all know it. Here is a question I can not find the answer to. I have what started off as a winter project. Which is know a major build. Have a 2003 soft tail heritage with a numbered paint job with only 7,000 mls. Attempting to change out the gauge and have found that the new gauges will only function on a 2004 and newer. Why is this. Dakota digital phoned me and informed me that they were out of stock and would take six month to get one made. What is the change from 2003 to 2004 and it is not the injection that should have nothing to do with the gauge. Right??
@LowCountryHarleyDavidson
2 жыл бұрын
There was a Big change...Harley went from Analog to Digital communication between Speedometer and everything else. It was the beginning of what we called the Magic Bus days...Doc
Hey Doc another great video! I’m getting code PPU 82883. What does this mean? Do I need to take to the dealer or can I fix it? I’m not finding a solution on HD forum.
@LowCountryHarleyDavidson
Жыл бұрын
That is not a code. Nothing to see here, keep moving along 🤦♂️….Doc
@markwhitney9175
Жыл бұрын
The check engine and security icon lights come on and then go out. This is new so that is why I was mostly concerned. Thank you for answering my question Doc!
I have a 2012 electraglide Keeps throwing a over voltage On acc code Clear code turn the bike off Then turn back on codes comes back without starting The Harley bible says it set the code I believe it said to do that it had to be over 16v for 3 or 5 sec But the bike was never started I went through check the charging system Ended up the book said replace speedo Luckily I had a old one swap out but did no good I finally got it figured out Any guess what you think it was ???? Ok I will tell you It was a aftermarket led load equalizer
@LowCountryHarleyDavidson
2 жыл бұрын
Point Proven! Thank you for sharing....Doc
I recently had a p0505 lose of idle which i caused i tried a manuel idle valve in my 09 sportster 1200c which since i ordered a new iac valve fine now
Unless folks are mechanically inclined, and have that picnic table of diagnostic goodies...It's really best off to the dealer for DTC issues.
@CenobiteBeldar
2 жыл бұрын
But there are dealerships who will say it's normal. So, no, they're not always the best for issues. A Honda dealership has techs who work like drunks. There's a cable on my Honda Shadow 750 that they forgot to run through the clip that keeps the wires together. I asked the service writer at the desk at the dealership if the tech could simply just put it back through the loop. He didn't write it down and the tech didn't do it. I've taken my bike there several times for service over anything (I don't have a garage nor access to a lift) and the techs fail EACH TIME to spot the flaw. If you have pride in your work, show it. If you like what you do, it should come out of those hands working on the machine. Everything is artwork and mechanics are really just morticians/surgeons. Repair it and make it look like it's supposed to. But mechanics don't want to do that. Makes no sense to me whatsoever.
Hey Doc. Thanks for what you do. My wife, a 06 cvo v rod, is having a weird health issue. Battery was doing some weak starts and died a few times. Then Wednesday, charged and strong, ot started fast and ran well to 3 different locations and suddenly barely cranked but did start, went 200' and died with no juice left to crank. Just turned to E but should have made it at least 10 more miles, but so tried jumping, no. Tried with a little fuel, no. Even being jumped by a charger/jump pack, half the time barely cranked and other half cranked strong but no. Now new battery + plenty fuel, no start and even cranks slower immediately AND I don't hear fuel pump at all, plus didn't get fuel from bleeder valve when tryingto start. Did I kill her? I love her and need her back. Voodoo? Black magic? Help please! I have codes.
@LowCountryHarleyDavidson
Жыл бұрын
This is some serious MoJo. Better take it to a dealer for some witch doctor cure…Doc
@bobbysweeney5377
Жыл бұрын
@@LowCountryHarleyDavidson Crap. Don't really have the $ for that unfortunately. I know the battery was going bad plus my positive terminal was loose. Would no battery make the ecm or something with security prevent power to fuel pump? I've tested and get no power to fuel pump or fuel pump fuse.
Po572?
That's why I own older Harleys. That's just way too complicated for a motorcycle. Who needs all that? Getting too much like a car. Engine light, ABS light, etc. just one more thing to stress out about. Don't you get enough of that in your car?
@LowCountryHarleyDavidson
2 жыл бұрын
You are preaching to the choir sir......Doc
Troubleshooting rule number 1. It's never the ECM. 🤣 maybe sometimes but if you order one and have to wait 2 weeks for it. It'll be something else.
@LowCountryHarleyDavidson
2 жыл бұрын
So True....Doc
💕💕💕💕
😵💫 The two week waiting period to actually get the bike into the shop. Then they where unable to replicate the issue…….🤦♂️
I've took my heritage in for service they told me the wrong oil was in it I told them that you are the ones that serviced it last he wanted to argue with me then I showed him the receipt of the last service Oklahoma city Harley Davidson trying to screw me I have a 2011 heritage
@LowCountryHarleyDavidson
2 жыл бұрын
Sorry to hear your story...Doc
Green number 6 code
@LowCountryHarleyDavidson
2 ай бұрын
?…..Doc
What does priority order mean
@LowCountryHarleyDavidson
Жыл бұрын
Codes are numbered. The lower numbered codes need to be addressed first. Many times the larger numbers are a by product of the smaller number codes…Doc
@harrymesner4077
Жыл бұрын
@@LowCountryHarleyDavidson thank you very much for the quick response.
Another reason for checkups at dealerships are to update your software
@LowCountryHarleyDavidson
2 жыл бұрын
Awesome Scott....Doc
Hear is my comment,what does "no rsp"mean
@LowCountryHarleyDavidson
Жыл бұрын
No communication between ECM, BCM and Speedo....Doc
NOT THAT SIMPLE! I just bought a new Screamin Eagle tuner for my Street glide. After spending the money for the tuner and the time to install the tune, now I have to spend more money and obviously at the dealer to have a 02 sensor code removed. Ive had this bike two weeks and Im starting to think this is a mistake. Especially for a bike with 900 miles on it.
@LowCountryHarleyDavidson
2 жыл бұрын
Too many questions to answer here. Like did You buy the Tuner, Install the Tuner and You Program the bike? and Now you have O2 sensor codes? You don't have to go to a dealer to clear a code. plenty of KZread videos on how to clear a DTC code. Now if you want to know why the codes came up? That is another story....Doc
@dewey66904
2 жыл бұрын
@@LowCountryHarleyDavidson I purchased the bike from a women who's husband had cancer. 2018 Street Glide 911 miles 107cu, V&H Power duals and Eliminator 400 slip-on. Now most people up-grade the tune with these parts so I went to check. Tuner website (Screamin eagle) said update available, so I updated the VCI and reinstalled stage 1 tune. Tune went right in no problem until I started the bike. engine light was on. Check the codes and had P0031, P0051 (CURRENT) P0134, P0154 (HISTORIC) deleted with tuner. Now Im a smart guy, I have another bike, a boat, I like to tinker. I found the code and what it was. 02 sensor. So I follow the videos advice and tried to delete the codes. By the way you cant delete the codes with the Tuner attached. So the Codes come up and I click and hold, delete comes up, I click and nothing happens. Then Part number starts to scroll pass. So I head to Harley dealer. Now I know it may run like crap and/or crappy fuel millage. Harley said you cant delete current codes. (on going maybe?). So, appointment made for June 7th $130 to delete codes and plus parts and labor for those parts. What really got me was he didn't know what the code was he never asked and really didn't seem like he cared if I was doing damage to it by driving it up there. You would think he would have checked the codes give advice and said Mr, smith your ok to drive it home and come back later. or you should not drive the bike with this code it could damage it. But I used a Harley device to upgrade a Harley and now I have to Pay Harley to fix the problem, That's the problem. Anyway thanks for the response and letting me vent. Great videos by the way. Thanks for your time
@dewey66904
2 жыл бұрын
@@LowCountryHarleyDavidson The other post was my rant but I did find the problem. The bike also has a wide band tuner on it as well. I didn't see it until I started checking all the connections. Not being familiar with the bike I missed it. But anyway I changed the tune to wide band and reinstalled the tune. Works great. So thanks for reaching out though.
Ha. My left had switches shorted out and MAN I got alll kinds of codes, think there were 2 ecm and 2 bcm and even abs or speed0.. Might have had trouble figuring it out EXCEPT, I knew I’d previously had to press very hard to get my hi beams to come on … then hard pressing the trip switch made them come on.. hah, was kinna a no brained at that point . Turned out the wires that go into the glue on the back of the switch were the issue. ..
@LowCountryHarleyDavidson
11 ай бұрын
Wow, thanks for sharing….Doc
Doc... I hope you check the comments on KZread. I have a 2014 Fatboy Lo and I want to buy the protective rubber cover that goes over the data port. I asked the parts counter at my local HD dealer and she blankly looked at me like I was from Mars. If you could please give me a part number, I'd be forever grateful. I wish shops would stop hiring staff that know nothing about bikes/parts.
@LowCountryHarleyDavidson
Жыл бұрын
This was not an easy find. Your year bike's Part break down does not include this part....finally found it! labeled a Weather Plug Part # 6990...Your welcome....Doc
@beri232
Жыл бұрын
@@LowCountryHarleyDavidson oh boy.... I hope this is the wrong part number because my dealership just ordered up a 3992 part number. At least I have 2 part numbers to aim for now I guess.Thanks Doc.
When my Harley Davidson's computer throws a code I reset it to .022 !
@LowCountryHarleyDavidson
2 жыл бұрын
brilliant...Doc
Code 57
@LowCountryHarleyDavidson
Жыл бұрын
Not enough Heinz sauce😆…..Doc
I have A P1001 code
@LowCountryHarleyDavidson
Жыл бұрын
System relay is not working....Doc
Hope I never have one as the Harley shop is far far away
What a bunch of bullshit , pump it two times pull the choke out kick it and go riding !
@Dinoxt12
2 жыл бұрын
I had a 2014 Streetglide sold it and bought a 2009 Heritage with 12000 miles one owner that has just a ECM & Catalytic Converter for the engine. Only thing I miss is the abs braking system.
My pan-shovel chopper likes this video
@LowCountryHarleyDavidson
2 жыл бұрын
Old School humor......Go and adjust your points....Doc
Po572
Well that don't help any. It tells person to take to shop to get fixed. People need trouble shooting information videos
@LowCountryHarleyDavidson
11 ай бұрын
Thank you for your opinion. We hope you find a site that supplies your needs….Doc
Let me turn this 4:34 video in to one sentence. If you have an error code, take it to Harley. That's it. What a waste of time.
@LowCountryHarleyDavidson
Жыл бұрын
Please allow us at Low Country Harley-Davidson to have our fun. Others seam to like it….Doc
bUS Er code
@LowCountryHarleyDavidson
2 ай бұрын
No such code. But every code with a “U” in front of the number has to do with the failure of the ECM or BCM able to communicate with all the systems on the bike….Doc
I thought You were going to tell us what the codes THEMSELVES meant. You just told us how the check engine light works. worthless to Me.
@LowCountryHarleyDavidson
2 жыл бұрын
I'm sorry to disappoint. Any knowledge is worth having...Doc
If the bikes were made better, there wouldn't be any need to have codes...
Po572
@LowCountryHarleyDavidson
Жыл бұрын
Depends on year and model🤷♂️…Doc